summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/unusual_devs.h65
-rw-r--r--drivers/usb/storage/usb.c13
2 files changed, 52 insertions, 26 deletions
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a5ca449f6e64..b130e170b4a8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,13 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
+ "Nokia",
+ "Nokia 3250",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
* Einar Th. Einarsson <einarthered@gmail.com> */
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
@@ -234,16 +241,6 @@ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
"Finecam S5",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
-/* Patch for Kyocera Finecam L3
- * Submitted by Michael Krauth <michael.krauth@web.de>
- * and Alessandro Fracchetti <al.fracchetti@tin.it>
- */
-UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100,
- "Kyocera",
- "Finecam L3",
- US_SC_SCSI, US_PR_BULK, NULL,
- US_FL_FIX_INQUIRY),
-
/* Reported by Paul Stewart <stewart@wetlogic.net>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
@@ -592,6 +589,13 @@ UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* floppy reports multiple luns */
+UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
+ "SAMSUNG",
+ "SFD-321U [FW 0C]",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
"Y-E Data",
@@ -627,18 +631,6 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
-UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
- "LaCie",
- "USB Hard Disk",
- US_SC_DEVICE, US_PR_CB, NULL, 0 ),
-
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
@@ -1106,7 +1098,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
"Optio S/S4",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-
+
+/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+ * converts into a WLAN device. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+ "ZyXEL",
+ "G-220F USB-WLAN Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
@@ -1237,6 +1237,16 @@ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
+ "C-MEX",
+ "A-VOX",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
@@ -1244,11 +1254,18 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "M600i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
*/
-UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee19be52f65..8d7bdcb5924d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -483,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
}
/* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
@@ -500,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
unusual_dev->useTransport;
us->flags = USB_US_ORIG_FLAGS(id->driver_info);
+ if (us->flags & US_FL_IGNORE_DEVICE) {
+ printk(KERN_INFO USB_STORAGE "device ignored\n");
+ return -ENODEV;
+ }
+
/*
* This flag is only needed when we're in high-speed, so let's
* disable it if we're in full-speed
@@ -541,6 +546,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
msgs[msg],
UTS_RELEASE);
}
+
+ return 0;
}
/* Get the transport settings */
@@ -969,7 +976,9 @@ static int storage_probe(struct usb_interface *intf,
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
- get_device_info(us, id);
+ result = get_device_info(us, id);
+ if (result)
+ goto BadDevice;
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
OpenPOWER on IntegriCloud