diff options
Diffstat (limited to 'drivers/usb/serial')
34 files changed, 396 insertions, 367 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 1d55762afbb1..8c3a42ea910c 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -710,6 +710,16 @@ config USB_SERIAL_QT2 To compile this driver as a module, choose M here: the module will be called quatech-serial. +config USB_SERIAL_FLASHLOADER + tristate "Infineon Modem Flashloader USB interface driver" + help + Say Y here if you want to download Infineon Modem + via USB Flashloader serial driver. + + To compile this driver as a module, choose M here: the + module will be called flashloader. + + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index cec63fa19104..f7130114488f 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -65,3 +65,4 @@ obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o +obj-$(CONFIG_USB_SERIAL_FLASHLOADER) += flashloader.o diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118cbf62..bc77e955cbef 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, @@ -413,8 +413,8 @@ static int ark3116_ioctl(struct tty_struct *tty, /* XXX: Some of these values are probably wrong. */ memset(&serstruct, 0, sizeof(serstruct)); serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; + serstruct.line = port->minor; + serstruct.port = port->port_number; serstruct.custom_divisor = 0; serstruct.baud_base = 460800; diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 3c4db6d196c6..f053b302a00d 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -43,7 +43,7 @@ static ssize_t show_port_number(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); - return sprintf(buf, "%d\n", port->number - port->serial->minor); + return sprintf(buf, "%d\n", port->port_number); } static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL); @@ -80,7 +80,7 @@ static int usb_serial_device_probe(struct device *dev) goto exit_with_autopm; } - minor = port->number; + minor = port->minor; tty_register_device(usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", @@ -106,7 +106,7 @@ static int usb_serial_device_remove(struct device *dev) /* make sure suspend/resume doesn't race against port_remove */ usb_autopm_get_interface(port->serial->interface); - minor = port->number; + minor = port->minor; tty_unregister_device(usb_serial_tty_driver, minor); device_remove_file(&port->dev, &dev_attr_port_number); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 5f3bcd31e204..afb50eab2049 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -108,18 +108,18 @@ static int usb_console_setup(struct console *co, char *options) * no need to check the index here: if the index is wrong, console * code won't call us */ - serial = usb_serial_get_by_index(co->index); - if (serial == NULL) { + port = usb_serial_port_get_by_minor(co->index); + if (port == NULL) { /* no device is connected yet, sorry :( */ pr_err("No USB device connected to ttyUSB%i\n", co->index); return -ENODEV; } + serial = port->serial; retval = usb_autopm_get_interface(serial->interface); if (retval) goto error_get_interface; - port = serial->port[co->index - serial->minor]; tty_port_tty_set(&port->port, NULL); info->port = port; @@ -210,7 +210,7 @@ static void usb_console_write(struct console *co, if (count == 0) return; - pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count); + pr_debug("%s - minor %d, %d byte(s)\n", __func__, port->minor, count); if (!port->port.console) { pr_debug("%s - port not opened\n", __func__); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 2c659553c07c..d6ef2f8da37d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -666,8 +666,6 @@ static void cp210x_set_termios(struct tty_struct *tty, unsigned int bits; unsigned int modem_ctl[4]; - dev_dbg(dev, "%s - port %d\n", __func__, port->number); - if (!tty) return; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555d37d8..e948dc02795d 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -423,7 +435,7 @@ static void cypress_set_dead(struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); dev_err(&port->dev, "cypress_m8 suspending failing port %d - " - "interval might be too short\n", port->number); + "interval might be too short\n", port->port_number); } @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; @@ -651,7 +667,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, { struct cypress_private *priv = usb_get_serial_port_data(port); - dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count); + dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count); /* line control commands, which need to be executed immediately, are not put into the buffer for obvious reasons. diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf60826884..b461311a2ae7 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 7b807d389527..19b467fe0388 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -1304,11 +1304,7 @@ static void digi_release(struct usb_serial *serial) static int digi_port_probe(struct usb_serial_port *port) { - unsigned port_num; - - port_num = port->number - port->serial->minor; - - return digi_port_init(port, port_num); + return digi_port_init(port, port->port_number); } static int digi_port_remove(struct usb_serial_port *port) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 090b411d893f..75e85cbf9e8b 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -165,11 +165,12 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ - tty_termios_copy_hw(&tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) @@ -187,12 +188,11 @@ static int f81232_tiocmset(struct tty_struct *tty, static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; int result; /* Setup termios */ if (tty) - f81232_set_termios(tty, port, &tmp_termios); + f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { @@ -288,15 +288,14 @@ static int f81232_ioctl(struct tty_struct *tty, struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; - dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, - port->number, cmd); + dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: memset(&ser, 0, sizeof ser); ser.type = PORT_16654; - ser.line = port->serial->minor; - ser.port = port->number; + ser.line = port->minor; + ser.port = port->port_number; ser.baud_base = 460800; if (copy_to_user((void __user *)arg, &ser, sizeof ser)) diff --git a/drivers/usb/serial/flashloader.c b/drivers/usb/serial/flashloader.c new file mode 100644 index 000000000000..e6f5c10e891c --- /dev/null +++ b/drivers/usb/serial/flashloader.c @@ -0,0 +1,39 @@ +/* + * Infineon Flashloader driver + * + * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x8087, 0x0716) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver flashloader_device = { + .driver = { + .owner = THIS_MODULE, + .name = "flashloader", + }, + .id_table = id_table, + .num_ports = 1, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &flashloader_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index b110c573ea85..04b5ed90ffb2 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -948,9 +948,9 @@ static void garmin_close(struct usb_serial_port *port) { struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", - __func__, port->number, garmin_data_p->mode, - garmin_data_p->state, garmin_data_p->flags); + dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n", + __func__, garmin_data_p->mode, garmin_data_p->state, + garmin_data_p->flags); garmin_clear(garmin_data_p); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 1477e8593476..dc2803b5eb09 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -915,8 +915,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return -ENOMEM; } - dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n", - __func__, port->number, edge_port->maxTxCredits); + dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n", + __func__, edge_port->maxTxCredits); return 0; } @@ -1122,9 +1122,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, copySize = min((unsigned int)count, (edge_port->txCredits - fifo->count)); - dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n", - __func__, port->number, count, - edge_port->txCredits - fifo->count, copySize); + dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n", + __func__, count, edge_port->txCredits - fifo->count, copySize); /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ @@ -1216,9 +1215,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n", - __func__, edge_port->port->number, - fifo->count, edge_port->write_in_progress); + dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n", + __func__, fifo->count, edge_port->write_in_progress); goto exit_send; } @@ -1230,9 +1228,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, * it's better to wait for more credits so we can do a larger write. */ if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n", - __func__, edge_port->port->number, fifo->count, - edge_port->txCredits); + dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n", + __func__, fifo->count, edge_port->txCredits); goto exit_send; } @@ -1256,10 +1253,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, edge_port->write_in_progress = false; goto exit_send; } - buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number - - edge_port->port->serial->minor, count); - buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number - - edge_port->port->serial->minor, count); + buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count); + buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count); /* now copy our data */ bytesleft = fifo->size - fifo->tail; @@ -1377,8 +1372,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty) edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__, - port->number, num_chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars); } return num_chars; @@ -1575,8 +1569,8 @@ static int get_serial_info(struct edgeport_port *edge_port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; - tmp.line = edge_port->port->serial->minor; - tmp.port = edge_port->port->number; + tmp.line = edge_port->port->minor; + tmp.port = edge_port->port->port_number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = edge_port->maxTxCredits; @@ -1601,15 +1595,15 @@ static int edge_ioctl(struct tty_struct *tty, DEFINE_WAIT(wait); struct edgeport_port *edge_port = usb_get_serial_port_data(port); - dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { case TIOCSERGETLSR: - dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return get_lsr_info(edge_port, (unsigned int __user *) arg); case TIOCGSERIAL: - dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); } return -ENOIOCTLCMD; @@ -2181,9 +2175,8 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port, currentCommand = buffer; - MAKE_CMD_EXT_CMD(¤tCommand, &length, - edge_port->port->number - edge_port->port->serial->minor, - command, param); + MAKE_CMD_EXT_CMD(¤tCommand, &length, edge_port->port->port_number, + command, param); status = write_cmd_usb(edge_port, buffer, length); if (status) { @@ -2266,18 +2259,16 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, int cmdLen = 0; int divisor; int status; - unsigned char number = - edge_port->port->number - edge_port->port->serial->minor; + u32 number = edge_port->port->port_number; if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { - dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n", - edge_port->port->number, baudRate); + dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n", + baudRate); return 0; } - dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__, - edge_port->port->number, baudRate); + dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate); status = calc_baud_rate_divisor(dev, baudRate, &divisor); if (status) { @@ -2388,9 +2379,8 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, currCmd = cmdBuffer; /* Build a cmd in the buffer to write the given register */ - MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, - edge_port->port->number - edge_port->port->serial->minor, - regNum, regValue); + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number, + regNum, regValue); status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); if (status) { @@ -2424,8 +2414,6 @@ static void change_port_settings(struct tty_struct *tty, __u8 txFlow; int status; - dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); - if (!edge_port->open && !edge_port->openPending) { dev_dbg(dev, "%s - port not opened\n", __func__); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 1be6ba7bee27..60054e72b75b 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -259,7 +259,7 @@ static int send_cmd(struct usb_device *dev, __u8 command, /* clear tx/rx buffers and fifo in TI UMP */ static int purge_port(struct usb_serial_port *port, __u16 mask) { - int port_number = port->number - port->serial->minor; + int port_number = port->port_number; dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); @@ -1392,7 +1392,8 @@ stayinbootmode: static int ti_do_config(struct edgeport_port *port, int feature, int on) { - int port_number = port->port->number - port->port->serial->minor; + int port_number = port->port->port_number; + on = !!on; /* 1 or 0 not bitmask */ return send_cmd(port->port->serial->dev, feature, (__u8)(UMPM_UART1_PORT + port_number), @@ -1637,7 +1638,7 @@ static void edge_bulk_in_callback(struct urb *urb) return; } - port_number = edge_port->port->number - edge_port->port->serial->minor; + port_number = edge_port->port->port_number; if (edge_port->lsr_event) { edge_port->lsr_event = 0; @@ -1730,7 +1731,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) if (edge_port == NULL) return -ENODEV; - port_number = port->number - port->serial->minor; + port_number = port->port_number; switch (port_number) { case 0: edge_port->uart_base = UMPMEM_BASE_UART1; @@ -1908,7 +1909,7 @@ static void edge_close(struct usb_serial_port *port) spin_unlock_irqrestore(&edge_port->ep_lock, flags); dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); - port_number = port->number - port->serial->minor; + port_number = port->port_number; send_cmd(serial->dev, UMPC_CLOSE_PORT, (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); @@ -2137,10 +2138,7 @@ static void change_port_settings(struct tty_struct *tty, int baud; unsigned cflag; int status; - int port_number = edge_port->port->number - - edge_port->port->serial->minor; - - dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); + int port_number = edge_port->port->port_number; config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { @@ -2284,7 +2282,6 @@ static void edge_set_termios(struct tty_struct *tty, tty->termios.c_cflag, tty->termios.c_iflag); dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); - dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); if (edge_port == NULL) return; @@ -2366,8 +2363,8 @@ static int get_serial_info(struct edgeport_port *edge_port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; - tmp.line = edge_port->port->serial->minor; - tmp.port = edge_port->port->number; + tmp.line = edge_port->port->minor; + tmp.port = edge_port->port->port_number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = edge_port->port->bulk_out_size; @@ -2386,7 +2383,7 @@ static int edge_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c278b7b5..790673e5faa7 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b01f36..5a979729f8ec 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -152,7 +152,7 @@ static void keyspan_set_termios(struct tty_struct *tty, p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; cflag = tty->termios.c_cflag; - device_port = port->number - port->serial->minor; + device_port = port->port_number; /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ @@ -234,8 +234,8 @@ static int keyspan_write(struct tty_struct *tty, dataOffset = 1; } - dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n", - __func__, port->number, count, p_priv->out_flip); + dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, + p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -520,12 +520,7 @@ static void usa28_instat_callback(struct urb *urb) goto exit; } - /* - dev_dbg(&urb->dev->dev, - "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10], data[11]); - */ + /*dev_dbg(&urb->dev->dev, "%s %12ph", __func__, data);*/ /* Now do something useful with the data */ msg = (struct keyspan_usa28_portStatusMessage *)data; @@ -607,11 +602,7 @@ static void usa49_instat_callback(struct urb *urb) goto exit; } - /* - dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x", - __func__, data[0], data[1], data[2], data[3], data[4], - data[5], data[6], data[7], data[8], data[9], data[10]); - */ + /*dev_dbg(&urb->dev->dev, "%s: %11ph", __func__, data);*/ /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; @@ -1050,7 +1041,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) /* get the terminal config for the setup message now so we don't * need to send 2 of them */ - device_port = port->number - port->serial->minor; + device_port = port->port_number; if (tty) { cflag = tty->termios.c_cflag; /* Baud rate calculation takes baud rate as an integer @@ -1548,7 +1539,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1557,9 +1547,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; - device_port = port->number - port->serial->minor; + device_port = port->port_number; - outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1674,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } @@ -1710,7 +1691,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; - device_port = port->number - port->serial->minor; + device_port = port->port_number; /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; @@ -1840,17 +1821,16 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, this_urb = s_priv->glocont_urb; /* Work out which port within the device is being setup */ - device_port = port->number - port->serial->minor; + device_port = port->port_number; /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); return -1; } - dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n", - __func__, usb_pipeendpoint(this_urb->pipe), - port->number, device_port); + dev_dbg(&port->dev, "%s - endpoint %d (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), device_port); /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ @@ -1865,7 +1845,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); - /*msg.portNumber = port->number;*/ msg.portNumber = device_port; /* Only set baud rate if it's changed */ @@ -2155,12 +2134,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, this_urb = s_priv->glocont_urb; /* Work out which port within the device is being setup */ - device_port = port->number - port->serial->minor; + device_port = port->port_number; /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, - port->number); + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); return -1; } @@ -2401,7 +2379,7 @@ static int keyspan_port_probe(struct usb_serial_port *port) /* Setup values for the various callback routines */ cback = &keyspan_callbacks[d_details->msg_format]; - port_num = port->number - port->serial->minor; + port_num = port->port_number; /* Do indat endpoints first, once for each flip */ endp = d_details->indat_endpoints[port_num]; diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 47e247759eb0..40ccf6e5e318 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -224,8 +224,8 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port); if (result) { dev_err(&port->dev, - "%s - failed to configure device for port number=%d, error code=%d\n", - __func__, port->number, result); + "%s - failed to configure device, error code=%d\n", + __func__, result); goto exit; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e54345df9..51da424327b0 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } @@ -1036,7 +1047,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) * * 0x08 : SP1/2 Control Reg */ - port_number = port->number - port->serial->minor; + port_number = port->port_number; read_mos_reg(serial, port_number, LSR, &data); dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); @@ -1055,7 +1066,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00); read_mos_reg(serial, dummy, SP_CONTROL_REG, &data); - data = data | (port->number - port->serial->minor + 1); + data = data | (port->port_number + 1); write_mos_reg(serial, dummy, SP_CONTROL_REG, data); mos7720_port->shadowLCR = 0x83; write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); @@ -1136,8 +1147,8 @@ static void mos7720_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00); - write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00); + write_mos_reg(serial, port->port_number, MCR, 0x00); + write_mos_reg(serial, port->port_number, IER, 0x00); mos7720_port->open = 0; } @@ -1161,8 +1172,7 @@ static void mos7720_break(struct tty_struct *tty, int break_state) data = mos7720_port->shadowLCR & ~UART_LCR_SBC; mos7720_port->shadowLCR = data; - write_mos_reg(serial, port->number - port->serial->minor, - LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR); } /* @@ -1293,8 +1303,8 @@ static void mos7720_throttle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); if (status != 0) return; } @@ -1325,8 +1335,8 @@ static void mos7720_unthrottle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); if (status != 0) return; } @@ -1350,7 +1360,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port, * Init Sequence for higher rates ***********************************************/ dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); - port_number = port->number - port->serial->minor; + port_number = port->port_number; write_mos_reg(serial, port_number, IER, 0x00); write_mos_reg(serial, port_number, FCR, 0x00); @@ -1476,7 +1486,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - number = port->number - port->serial->minor; + number = port->port_number; dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); /* Calculate the Divisor */ @@ -1527,7 +1537,7 @@ static void change_port_settings(struct tty_struct *tty, port = mos7720_port->port; serial = port->serial; - port_number = port->number - port->serial->minor; + port_number = port->port_number; if (!mos7720_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); @@ -1618,7 +1628,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); @@ -1720,7 +1730,7 @@ static int get_lsr_info(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; unsigned int result = 0; unsigned char data = 0; - int port_number = port->number - port->serial->minor; + int port_number = port->port_number; int count; count = mos7720_chars_in_buffer(tty); @@ -1782,8 +1792,8 @@ static int mos7720_tiocmset(struct tty_struct *tty, mcr &= ~UART_MCR_LOOP; mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); return 0; } @@ -1827,8 +1837,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, } mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); return 0; } @@ -1844,8 +1854,8 @@ static int get_serial_info(struct moschip_port *mos7720_port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; - tmp.line = mos7720_port->port->serial->minor; - tmp.port = mos7720_port->port->number; + tmp.line = mos7720_port->port->minor; + tmp.port = mos7720_port->port->port_number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; @@ -1927,7 +1937,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1970,7 +1980,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea545982..0a818b238508 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -303,15 +303,12 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, /* For the UART control registers, the application number need to be Or'ed */ if (port->serial->num_ports == 4) { - val |= (((__u16) port->number - - (__u16) (port->serial->minor)) + 1) << 8; + val |= ((__u16)port->port_number + 1) << 8; } else { - if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - val |= (((__u16) port->number - - (__u16) (port->serial->minor)) + 1) << 8; + if (port->port_number == 0) { + val |= ((__u16)port->port_number + 1) << 8; } else { - val |= (((__u16) port->number - - (__u16) (port->serial->minor)) + 2) << 8; + val |= ((__u16)port->port_number + 2) << 8; } } dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); @@ -340,16 +337,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, /* Wval is same as application number */ if (port->serial->num_ports == 4) { - Wval = - (((__u16) port->number - (__u16) (port->serial->minor)) + - 1) << 8; + Wval = ((__u16)port->port_number + 1) << 8; } else { - if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - Wval = (((__u16) port->number - - (__u16) (port->serial->minor)) + 1) << 8; + if (port->port_number == 0) { + Wval = ((__u16)port->port_number + 1) << 8; } else { - Wval = (((__u16) port->number - - (__u16) (port->serial->minor)) + 2) << 8; + Wval = ((__u16)port->port_number + 2) << 8; } } dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); @@ -631,9 +624,7 @@ static void mos7840_interrupt_callback(struct urb *urb) for (i = 0; i < serial->num_ports; i++) { mos7840_port = mos7840_get_port_private(serial->port[i]); - wval = - (((__u16) serial->port[i]->number - - (__u16) (serial->minor)) + 1) << 8; + wval = ((__u16)serial->port[i]->port_number + 1) << 8; if (mos7840_port->open) { if (sp[i] & 0x01) { dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); @@ -1065,8 +1056,8 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) * (can't set it up in mos7840_startup as the * * structures were not set up at that time.) */ - dev_dbg(&port->dev, "port number is %d\n", port->number); - dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); + dev_dbg(&port->dev, "port number is %d\n", port->port_number); + dev_dbg(&port->dev, "minor number is %d\n", port->minor); dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); @@ -1074,9 +1065,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->read_urb = port->read_urb; /* set up our bulk in urb */ - if ((serial->num_ports == 2) - && ((((__u16)port->number - - (__u16)(port->serial->minor)) % 2) != 0)) { + if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { usb_fill_bulk_urb(mos7840_port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, @@ -1199,7 +1188,7 @@ static void mos7840_close(struct usb_serial_port *port) mos7840_port->read_urb_busy = false; port0->open_ports--; - dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); + dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports); if (port0->open_ports == 0) { if (serial->port[0]->interrupt_in_urb) { dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); @@ -1435,9 +1424,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(urb->transfer_buffer, current_position, transfer_size); /* fill urb with data and submit */ - if ((serial->num_ports == 2) - && ((((__u16)port->number - - (__u16)(port->serial->minor)) % 2) != 0)) { + if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -1732,10 +1719,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (mos7840_serial_paranoia_check(port->serial, __func__)) return -1; - number = mos7840_port->port->number - mos7840_port->port->serial->minor; + number = mos7840_port->port->port_number; - dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__, - mos7840_port->port->number, baudRate); + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { #ifdef HW_flow_control @@ -2016,7 +2002,6 @@ static void mos7840_set_termios(struct tty_struct *tty, tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); /* change the port settings to the new ones specified */ @@ -2083,8 +2068,8 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; - tmp.line = mos7840_port->port->serial->minor; - tmp.port = mos7840_port->port->number; + tmp.line = mos7840_port->port->minor; + tmp.port = mos7840_port->port->port_number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; @@ -2142,13 +2127,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2151,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2170,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2181,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { @@ -2221,7 +2225,7 @@ static int mos7840_port_probe(struct usb_serial_port *port) /* we set up the pointers to the endpoints in the mos7840_open * * function, as the structures aren't created yet. */ - pnum = port->number - serial->minor; + pnum = port->port_number; dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); @@ -2242,10 +2246,8 @@ static int mos7840_port_probe(struct usb_serial_port *port) * usb-serial.c:get_free_serial() and cannot therefore be used * to index device instances */ mos7840_port->port_num = pnum + 1; - dev_dbg(&port->dev, "port->number = %d\n", port->number); - dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); + dev_dbg(&port->dev, "port->minor = %d\n", port->minor); dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); - dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 5f4b0cd0f6e9..cbe779f578f9 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -348,7 +348,7 @@ static int get_serial_info(struct usb_serial_port *port, /* fake emulate a 16550 uart to make userspace code happy */ tmp.type = PORT_16550A; - tmp.line = port->serial->minor; + tmp.line = port->minor; tmp.port = 0; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; @@ -367,7 +367,7 @@ static int opticon_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 93d02bc4eb52..5dd857de05b0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -159,8 +159,6 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 #define NOVATELWIRELESS_PRODUCT_E362 0x9010 -#define NOVATELWIRELESS_PRODUCT_G1 0xA001 -#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 #define NOVATELWIRELESS_PRODUCT_MC551 0xB001 @@ -250,13 +248,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -495,18 +487,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -593,6 +577,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, @@ -742,8 +728,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) }, - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, @@ -797,7 +781,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -1199,16 +1182,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7151659367a0..cb6bbed374f2 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -275,7 +275,7 @@ static void pl2303_set_termios(struct tty_struct *tty, u8 control; const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800, 38400, - 57600, 115200, 230400, 460800, 614400, + 57600, 115200, 230400, 460800, 500000, 614400, 921600, 1228800, 2457600, 3000000, 6000000 }; int baud_floor, baud_ceil; int k; @@ -284,7 +284,7 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; cflag = tty->termios.c_cflag; @@ -293,15 +293,15 @@ static void pl2303_set_termios(struct tty_struct *tty, if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - tty->termios = *old_termios; + if (old_termios) + tty->termios = *old_termios; return; } i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (cflag & CSIZE) { switch (cflag & CSIZE) { @@ -433,7 +433,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else if ((old_termios->c_cflag & CBAUD) == B0) + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; @@ -448,8 +448,7 @@ static void pl2303_set_termios(struct tty_struct *tty, i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (cflag & CRTSCTS) { if (spriv->type == HX) @@ -492,7 +491,6 @@ static void pl2303_close(struct usb_serial_port *port) static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; @@ -508,7 +506,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) /* Setup termios */ if (tty) - pl2303_set_termios(tty, port, &tmp_termios); + pl2303_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { @@ -641,8 +639,8 @@ static int pl2303_ioctl(struct tty_struct *tty, case TIOCGSERIAL: memset(&ser, 0, sizeof ser); ser.type = PORT_16654; - ser.line = port->serial->minor; - ser.port = port->number; + ser.line = port->minor; + ser.port = port->port_number; ser.baud_base = 460800; if (copy_to_user((void __user *)arg, &ser, sizeof ser)) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b782126..c65437cfd4a2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -35,7 +35,13 @@ static const struct usb_device_id id_table[] = { {DEVICE_G1K(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ {DEVICE_G1K(0x413c, 0x8172)}, /* Dell Gobi Modem device */ {DEVICE_G1K(0x413c, 0x8171)}, /* Dell Gobi QDL device */ - {DEVICE_G1K(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */ + {DEVICE_G1K(0x1410, 0xa002)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa003)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa004)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa005)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa006)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa007)}, /* Novatel Gobi Modem device */ {DEVICE_G1K(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ {DEVICE_G1K(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ {DEVICE_G1K(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ @@ -118,6 +124,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 02b0803425c5..d99743290fc1 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -343,7 +343,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) int status; unsigned long flags; - device_port = (u16) (port->number - port->serial->minor); + device_port = port->port_number; serial = port->serial; @@ -388,9 +388,8 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) status = qt2_set_port_config(serial->dev, device_port, DEFAULT_BAUD_RATE, UART_LCR_WLEN8); if (status < 0) { - dev_err(&port->dev, - "%s - initial setup failed for port %i (%i)\n", - __func__, port->number, device_port); + dev_err(&port->dev, "%s - initial setup failed (%i)\n", + __func__, device_port); return status; } @@ -466,7 +465,7 @@ static int get_serial_info(struct usb_serial_port *port, return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - tmp.line = port->serial->minor; + tmp.line = port->minor; tmp.port = 0; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; @@ -523,7 +522,7 @@ static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch) return; } -void qt2_process_read_urb(struct urb *urb) +static void qt2_process_read_urb(struct urb *urb) { struct usb_serial *serial; struct qt2_serial_private *serial_priv; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 8894665cd610..de958c5b52e3 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -914,7 +914,7 @@ static int sierra_port_probe(struct usb_serial_port *port) /* This is really the usb-serial port number of the interface * rather than the interface number. */ - ifnum = port->number - serial->minor; + ifnum = port->port_number; himemoryp = &typeA_interface_list; } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cf3df793c2b7..ddf6c47137dc 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -291,7 +291,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; - unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; @@ -299,15 +298,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty, u8 control; /* check that they really want us to change something */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; - if ((old_cflag & CBAUD) == B0) { + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; - if (!(old_cflag & CRTSCTS)) + if (!(old_termios->c_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { @@ -394,7 +393,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; @@ -411,7 +409,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) spcp8x5_set_ctrl_line(port, priv->line_control); if (tty) - spcp8x5_set_termios(tty, port, &tmp_termios); + spcp8x5_set_termios(tty, port, NULL); port->port.drain_delay = 256; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 5b62dbbdf996..e5750be49054 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -323,7 +323,7 @@ static int get_serial_info(struct usb_serial_port *port, return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - tmp.line = port->serial->minor; + tmp.line = port->minor; tmp.port = 0; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c92c5ed4e580..7182bb774b79 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -172,7 +172,8 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, - { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; @@ -476,7 +477,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - port_number = port->number - port->serial->minor; + port_number = port->port_number; tport->tp_msr = 0; tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); @@ -618,7 +619,7 @@ static void ti_close(struct usb_serial_port *port) kfifo_reset_out(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - port_number = port->number - port->serial->minor; + port_number = port->port_number; dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, @@ -776,7 +777,7 @@ static void ti_set_termios(struct tty_struct *tty, tcflag_t cflag, iflag; int baud; int status; - int port_number = port->number - port->serial->minor; + int port_number = port->port_number; unsigned int mcr; cflag = tty->termios.c_cflag; @@ -1262,7 +1263,7 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr) int size, status; struct ti_device *tdev = tport->tp_tdev; struct usb_serial_port *port = tport->tp_port; - int port_number = port->number - port->serial->minor; + int port_number = port->port_number; struct ti_port_status *data; size = sizeof(struct ti_port_status); @@ -1308,8 +1309,8 @@ static int ti_get_serial_info(struct ti_port *tport, memset(&ret_serial, 0, sizeof(ret_serial)); ret_serial.type = PORT_16550A; - ret_serial.line = port->serial->minor; - ret_serial.port = port->number - port->serial->minor; + ret_serial.line = port->minor; + ret_serial.port = port->port_number; ret_serial.flags = tport->tp_flags; ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b353e7e3d480..4a2423e84d55 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -52,7 +52,9 @@ /* Abbott Diabetics vendor and product ids */ #define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_PRODUCT_ID 0x3410 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 /* Commands */ #define TI_GET_VERSION 0x01 diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4753c005cfb6..cb27fcb2fc90 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -37,11 +37,15 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/kfifo.h> +#include <linux/idr.h> #include "pl2303.h" #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" #define DRIVER_DESC "USB Serial Driver core" +#define USB_SERIAL_TTY_MAJOR 188 +#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */ + /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead the MODULE_DEVICE_TABLE declarations in each serial driver cause the "hotplug" program to pull in whatever module is necessary @@ -49,81 +53,75 @@ drivers depend on it. */ -static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; +static DEFINE_IDR(serial_minors); static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); /* - * Look up the serial structure. If it is found and it hasn't been - * disconnected, return with its disc_mutex held and its refcount - * incremented. Otherwise return NULL. + * Look up the serial port structure. If it is found and it hasn't been + * disconnected, return with the parent usb_serial structure's disc_mutex held + * and its refcount incremented. Otherwise return NULL. */ -struct usb_serial *usb_serial_get_by_index(unsigned index) +struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor) { struct usb_serial *serial; + struct usb_serial_port *port; mutex_lock(&table_lock); - serial = serial_table[index]; - - if (serial) { - mutex_lock(&serial->disc_mutex); - if (serial->disconnected) { - mutex_unlock(&serial->disc_mutex); - serial = NULL; - } else { - kref_get(&serial->kref); - } + port = idr_find(&serial_minors, minor); + if (!port) + goto exit; + + serial = port->serial; + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) { + mutex_unlock(&serial->disc_mutex); + port = NULL; + } else { + kref_get(&serial->kref); } +exit: mutex_unlock(&table_lock); - return serial; + return port; } -static struct usb_serial *get_free_serial(struct usb_serial *serial, - int num_ports, unsigned int *minor) +static int allocate_minors(struct usb_serial *serial, int num_ports) { + struct usb_serial_port *port; unsigned int i, j; - int good_spot; + int minor; dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); - *minor = 0; mutex_lock(&table_lock); - for (i = 0; i < SERIAL_TTY_MINORS; ++i) { - if (serial_table[i]) - continue; - - good_spot = 1; - for (j = 1; j <= num_ports-1; ++j) - if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) { - good_spot = 0; - i += j; - break; - } - if (good_spot == 0) - continue; - - *minor = i; - j = 0; - dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor); - for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { - serial_table[i] = serial; - serial->port[j++]->number = i; - } - mutex_unlock(&table_lock); - return serial; + for (i = 0; i < num_ports; ++i) { + port = serial->port[i]; + minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL); + if (minor < 0) + goto error; + port->minor = minor; + port->port_number = i; } + serial->minors_reserved = 1; mutex_unlock(&table_lock); - return NULL; + return 0; +error: + /* unwind the already allocated minors */ + for (j = 0; j < i; ++j) + idr_remove(&serial_minors, serial->port[j]->minor); + mutex_unlock(&table_lock); + return minor; } -static void return_serial(struct usb_serial *serial) +static void release_minors(struct usb_serial *serial) { int i; mutex_lock(&table_lock); for (i = 0; i < serial->num_ports; ++i) - serial_table[serial->minor + i] = NULL; + idr_remove(&serial_minors, serial->port[i]->minor); mutex_unlock(&table_lock); + serial->minors_reserved = 0; } static void destroy_serial(struct kref *kref) @@ -135,8 +133,8 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); /* return the minor range that this device had */ - if (serial->minor != SERIAL_TTY_NO_MINOR) - return_serial(serial); + if (serial->minors_reserved) + release_minors(serial); if (serial->attached && serial->type->release) serial->type->release(serial); @@ -185,13 +183,11 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) struct usb_serial_port *port; int retval = -ENODEV; - serial = usb_serial_get_by_index(idx); - if (!serial) + port = usb_serial_port_get_by_minor(idx); + if (!port) return retval; - port = serial->port[idx - serial->minor]; - if (!port) - goto error_no_port; + serial = port->serial; if (!try_module_get(serial->type->driver.owner)) goto error_module_get; @@ -218,7 +214,6 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) error_get_interface: module_put(serial->type->driver.owner); error_module_get: - error_no_port: usb_serial_put(serial); mutex_unlock(&serial->disc_mutex); return retval; @@ -408,7 +403,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -420,8 +415,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; @@ -454,14 +447,16 @@ static int serial_break(struct tty_struct *tty, int break_state) static int serial_proc_show(struct seq_file *m, void *v) { struct usb_serial *serial; + struct usb_serial_port *port; int i; char tmp[40]; seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); - for (i = 0; i < SERIAL_TTY_MINORS; ++i) { - serial = usb_serial_get_by_index(i); - if (serial == NULL) + for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) { + port = usb_serial_port_get_by_minor(i); + if (port == NULL) continue; + serial = port->serial; seq_printf(m, "%d:", i); if (serial->type->driver.owner) @@ -473,7 +468,7 @@ static int serial_proc_show(struct seq_file *m, void *v) le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); seq_printf(m, " num_ports:%d", serial->num_ports); - seq_printf(m, " port:%d", i - serial->minor + 1); + seq_printf(m, " port:%d", port->port_number); usb_make_path(serial->dev, tmp, sizeof(tmp)); seq_printf(m, " path:%s", tmp); @@ -615,7 +610,7 @@ static struct usb_serial *create_serial(struct usb_device *dev, serial->interface = usb_get_intf(interface); kref_init(&serial->kref); mutex_init(&serial->disc_mutex); - serial->minor = SERIAL_TTY_NO_MINOR; + serial->minors_reserved = 0; return serial; } @@ -724,7 +719,6 @@ static int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; struct usb_serial_driver *type = NULL; int retval; - unsigned int minor; int buffer_size; int i; int j; @@ -1041,16 +1035,15 @@ static int usb_serial_probe(struct usb_interface *interface, */ serial->disconnected = 1; - if (get_free_serial(serial, num_ports, &minor) == NULL) { - dev_err(ddev, "No more free serial devices\n"); + if (allocate_minors(serial, num_ports)) { + dev_err(ddev, "No more free serial minor numbers\n"); goto probe_error; } - serial->minor = minor; /* register all of the individual ports with the driver core */ for (i = 0; i < num_ports; ++i) { port = serial->port[i]; - dev_set_name(&port->dev, "ttyUSB%d", port->number); + dev_set_name(&port->dev, "ttyUSB%d", port->minor); dev_dbg(ddev, "registering %s", dev_name(&port->dev)); device_enable_async_suspend(&port->dev); @@ -1061,7 +1054,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 0; - usb_serial_console_init(minor); + usb_serial_console_init(serial->port[0]->minor); exit: module_put(type->driver.owner); return 0; @@ -1225,17 +1218,13 @@ static struct usb_driver usb_serial_driver = { static int __init usb_serial_init(void) { - int i; int result; - usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS); + usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS); if (!usb_serial_tty_driver) return -ENOMEM; /* Initialize our global data */ - for (i = 0; i < SERIAL_TTY_MINORS; ++i) - serial_table[i] = NULL; - result = bus_register(&usb_serial_bus_type); if (result) { pr_err("%s - registering bus driver failed\n", __func__); @@ -1244,7 +1233,7 @@ static int __init usb_serial_init(void) usb_serial_tty_driver->driver_name = "usbserial"; usb_serial_tty_driver->name = "ttyUSB"; - usb_serial_tty_driver->major = SERIAL_TTY_MAJOR; + usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR; usb_serial_tty_driver->minor_start = 0; usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL; diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index ece326ef63a0..8257d30c4072 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -124,8 +124,8 @@ static int get_serial_info(struct usb_serial_port *port, return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - tmp.line = port->serial->minor; - tmp.port = port->number; + tmp.line = port->minor; + tmp.port = port->port_number; tmp.baud_base = tty_get_baud_rate(port->port.tty); tmp.close_delay = port->port.close_delay / 10; tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8a084f..9910aa2edf4b 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca3586d74..36a7740e827c 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -461,8 +461,8 @@ static int whiteheat_ioctl(struct tty_struct *tty, case TIOCGSERIAL: memset(&serstruct, 0, sizeof(serstruct)); serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; + serstruct.line = port->minor; + serstruct.port = port->port_number; serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); serstruct.custom_divisor = 0; @@ -626,7 +626,7 @@ static int firm_open(struct usb_serial_port *port) { struct whiteheat_simple open_command; - open_command.port = port->number - port->serial->minor + 1; + open_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); } @@ -636,7 +636,7 @@ static int firm_close(struct usb_serial_port *port) { struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; + close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); } @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->port_number + 1; /* get the byte size */ switch (cflag & CSIZE) { @@ -726,7 +726,7 @@ static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb rts_command; - rts_command.port = port->number - port->serial->minor + 1; + rts_command.port = port->port_number + 1; rts_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); @@ -737,7 +737,7 @@ static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb dtr_command; - dtr_command.port = port->number - port->serial->minor + 1; + dtr_command.port = port->port_number + 1; dtr_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_DTR, (__u8 *)&dtr_command, sizeof(dtr_command)); @@ -748,7 +748,7 @@ static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb break_command; - break_command.port = port->number - port->serial->minor + 1; + break_command.port = port->port_number + 1; break_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_BREAK, (__u8 *)&break_command, sizeof(break_command)); @@ -759,7 +759,7 @@ static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { struct whiteheat_purge purge_command; - purge_command.port = port->number - port->serial->minor + 1; + purge_command.port = port->port_number + 1; purge_command.what = rxtx; return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); @@ -770,7 +770,7 @@ static int firm_get_dtr_rts(struct usb_serial_port *port) { struct whiteheat_simple get_dr_command; - get_dr_command.port = port->number - port->serial->minor + 1; + get_dr_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); } @@ -780,7 +780,7 @@ static int firm_report_tx_done(struct usb_serial_port *port) { struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; + close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); } diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee7373b4ee..fca4c752a4ed 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; @@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); @@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); |
