summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig11
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/cp2101.c363
-rw-r--r--drivers/usb/serial/cypress_m8.c2
-rw-r--r--drivers/usb/serial/cypress_m8.h1
-rw-r--r--drivers/usb/serial/ftdi_sio.c127
-rw-r--r--drivers/usb/serial/ftdi_sio.h2
-rw-r--r--drivers/usb/serial/option.c729
-rw-r--r--drivers/usb/serial/usb-serial.c20
9 files changed, 1128 insertions, 128 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bc798edf0358..9438909e87a5 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
+config USB_SERIAL_OPTION
+ tristate "USB Option PCMCIA serial driver"
+ depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
+ help
+ Say Y here if you want to use an Option card. This is a
+ GSM card, controlled by three serial ports which are connected
+ via an OHCI adapter located on a PC card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called option.
+
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index d56ff6d86cce..6c7cdcc99a9e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7e9bb63eb466..4ace9964fc6b 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -7,6 +7,14 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ * Outstanding Issues:
+ * Buffers are not flushed when the port is opened.
+ * Multiple calls to write() may fail with "Resource temporarily unavailable"
+ *
*/
#include <linux/config.h>
@@ -24,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.03"
+#define DRIVER_VERSION "v0.04"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*);
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
+static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+ unsigned int, unsigned int);
static void cp2101_break_ctl(struct usb_serial_port*, int);
static int cp2101_startup (struct usb_serial *);
static void cp2101_shutdown(struct usb_serial*);
@@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*);
static int debug;
static struct usb_device_id id_table [] = {
- {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/
- {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/
- { } /* Terminating Entry*/
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { } /* Terminating Entry */
};
MODULE_DEVICE_TABLE (usb, id_table);
@@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = {
.close = cp2101_close,
.break_ctl = cp2101_break_ctl,
.set_termios = cp2101_set_termios,
+ .tiocmget = cp2101_tiocmget,
+ .tiocmset = cp2101_tiocmset,
.attach = cp2101_startup,
.shutdown = cp2101_shutdown,
};
-/*Config request types*/
+/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
-/*Config SET requests. To GET, add 1 to the request number*/
-#define CP2101_UART 0x00 /*Enable / Disable*/
-#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/
-#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/
-#define CP2101_BREAK 0x05 /*On / Off*/
-#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/
-#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/
-#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 0x00 /* Enable / Disable */
+#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK 0x05 /* On / Off */
+#define CP2101_CONTROL 0x07 /* Flow control line states */
+#define CP2101_MODEMCTL 0x13 /* Modem controls */
+#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
-/*CP2101_UART*/
+/* CP2101_UART */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
-/*CP2101_BAUDRATE*/
+/* CP2101_BAUDRATE */
#define BAUD_RATE_GEN_FREQ 0x384000
-/*CP2101_BITS*/
+/* CP2101_BITS */
#define BITS_DATA_MASK 0X0f00
+#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
#define BITS_DATA_7 0X0700
#define BITS_DATA_8 0X0800
@@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = {
#define BITS_STOP_1 0x0000
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
+
+/* CP2101_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
+/* CP2101_CONTROL */
+#define CONTROL_DTR 0x0001
+#define CONTROL_RTS 0x0002
+#define CONTROL_CTS 0x0010
+#define CONTROL_DSR 0x0020
+#define CONTROL_RING 0x0040
+#define CONTROL_DCD 0x0080
+#define CONTROL_WRITE_DTR 0x0100
+#define CONTROL_WRITE_RTS 0x0200
-static int cp2101_get_config(struct usb_serial_port* port, u8 request)
+/*
+ * cp2101_get_config
+ * Reads from the CP2101 configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- unsigned char buf[4];
- unsigned int value;
- int result, i;
+ u32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
+ memset(buf, 0, length * sizeof(u32));
+
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
- /*For get requests, the request number must be incremented*/
+ /* For get requests, the request number must be incremented */
request++;
- /*Issue the request, attempting to read 4 bytes*/
+ /* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- 0, buf, 4, 300);
+ 0, buf, size, 300);
- if (result < 0) {
- dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x result=%d\n",
- __FUNCTION__, request, result);
- return result;
- }
+ /* Convert data into an array of integers */
+ for (i=0; i<length; i++)
+ data[i] = le32_to_cpu(buf[i]);
- /*Assemble each byte read into an integer value*/
- value = 0;
- for (i=0; i<4 && i<result; i++)
- value |= (buf[i] << (i * 8));
+ kfree(buf);
- dbg( " %s - request=0x%x result=%d value=0x%x",
- __FUNCTION__, request, result, value);
+ if (result != size) {
+ dev_err(&port->dev, "%s - Unable to send config request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
- return value;
+ return 0;
}
-static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
+/*
+ * cp2101_set_config
+ * Writes to the CP2101 configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- int result;
- result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_DEVICE, value,
- 0, NULL, 0, 300);
+ u32 *buf;
+ int result, i, length;
- if (result <0) {
- dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x value=0x%x result=%d\n",
- __FUNCTION__, request, value, result);
- return result;
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* Array of integers into bytes */
+ for (i = 0; i < length; i++)
+ buf[i] = cpu_to_le32(data[i]);
+
+ if (size > 2) {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+ 0, buf, size, 300);
+ } else {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
}
- dbg(" %s - request=0x%x value=0x%x result=%d",
- __FUNCTION__, request, value, result);
+ kfree(buf);
+
+ if ((size > 2 && result != size) || result < 0) {
+ dev_err(&port->dev, "%s - Unable to send request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
+ /* Single data value */
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
return 0;
}
+/*
+ * cp2101_set_config_single
+ * Convenience function for calling cp2101_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp2101_set_config_single(struct usb_serial_port* port,
+ u8 request, unsigned int data)
+{
+ return cp2101_set_config(port, request, &data, 2);
+}
+
static int cp2101_open (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
@@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
dbg("%s - port %d", __FUNCTION__, port->number);
- if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
+ if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__FUNCTION__);
return -EPROTO;
@@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
return result;
}
- /*Configure the termios structure*/
+ /* Configure the termios structure */
cp2101_get_termios(port);
+ /* Set the DTR and RTS pins low */
+ cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
return 0;
}
@@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- cp2101_set_config(port, CP2101_UART, UART_DISABLE);
+ cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
}
-/* cp2101_get_termios*/
-/* Reads the baud rate, data bits, parity and stop bits from the device*/
-/* Corrects any unsupported values*/
-/* Configures the termios structure to reflect the state of the device*/
+/*
+ * cp2101_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
static void cp2101_get_termios (struct usb_serial_port *port)
{
- unsigned int cflag;
+ unsigned int cflag, modem_ctl[4];
int baud;
int bits;
@@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port)
}
cflag = port->tty->termios->c_cflag;
- baud = cp2101_get_config(port, CP2101_BAUDRATE);
- /*Convert to baudrate*/
+ cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ /* Convert to baudrate */
if (baud)
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
cflag &= ~CBAUD;
switch (baud) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port)
dbg("%s - Baud rate is not supported, "
"using 9600 baud", __FUNCTION__);
cflag |= B9600;
- cp2101_set_config(port, CP2101_BAUDRATE,
+ cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ/9600));
break;
}
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
switch(bits & BITS_DATA_MASK) {
+ case BITS_DATA_5:
+ dbg("%s - data bits = 5", __FUNCTION__);
+ cflag |= CS5;
+ break;
case BITS_DATA_6:
dbg("%s - data bits = 6", __FUNCTION__);
cflag |= CS6;
@@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, "
@@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port)
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, "
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, "
"disabling parity", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
break;
case BITS_STOP_1_5:
dbg("%s - stop bits = 1.5 (not supported, "
- "using 1 stop bit", __FUNCTION__);
+ "using 1 stop bit)", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __FUNCTION__);
@@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port)
dbg("%s - Unknown number of stop bits, "
"using 1 stop bit", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ if (modem_ctl[0] & 0x0008) {
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ cflag |= CRTSCTS;
+ } else {
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ cflag &= ~CRTSCTS;
+ }
+
port->tty->termios->c_cflag = cflag;
}
@@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
struct termios *old_termios)
{
unsigned int cflag, old_cflag=0;
- int baud=0;
- int bits;
+ int baud=0, bits;
+ unsigned int modem_ctl[4];
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
}
cflag = port->tty->termios->c_cflag;
- /* check that they really want us to change something */
+ /* Check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
/* If the baud rate is to be updated*/
if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
switch (cflag & CBAUD) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port,
if (baud) {
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
- if (cp2101_set_config(port, CP2101_BAUDRATE,
+ if (cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ / baud)))
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
}
}
- /*If the number of data bits is to be updated*/
+ /* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ dbg("%s - data bits = 5", __FUNCTION__);
+ break;
case CS6:
bits |= BITS_DATA_6;
dbg("%s - data bits = 6", __FUNCTION__);
@@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
bits |= BITS_DATA_8;
break;
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
dbg("%s - parity = EVEN", __FUNCTION__);
}
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port,
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __FUNCTION__);
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of stop bits requested "
"not supported by device\n");
}
+
+ if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+
+ if (cflag & CRTSCTS) {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x09;
+ modem_ctl[1] = 0x80;
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ } else {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x01;
+ modem_ctl[1] |= 0x40;
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ }
+
+ dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+ cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ }
+
+}
+
+static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ int control = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (set & TIOCM_RTS) {
+ control |= CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (set & TIOCM_DTR) {
+ control |= CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+ if (clear & TIOCM_RTS) {
+ control &= ~CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (clear & TIOCM_DTR) {
+ control &= ~CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+
+ dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+ return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+{
+ int control, result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+
+ result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+ |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+ |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+ |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+ |((control & CONTROL_RING)? TIOCM_RI : 0)
+ |((control & CONTROL_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+ return result;
}
static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
{
- u16 state;
+ int state;
dbg("%s - port %d", __FUNCTION__, port->number);
if (break_state == 0)
@@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
state = BREAK_ON;
dbg("%s - turning break %s", __FUNCTION__,
state==BREAK_OFF ? "off" : "on");
- cp2101_set_config(port, CP2101_BREAK, state);
+ cp2101_set_config(port, CP2101_BREAK, &state, 2);
}
static int cp2101_startup (struct usb_serial *serial)
{
- /*CP2101 buffers behave strangely unless device is reset*/
+ /* CP2101 buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
@@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
- /* stop reads and writes on all ports */
+ /* Stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
cp2101_cleanup(serial->port[i]);
}
@@ -560,16 +747,16 @@ static int __init cp2101_init (void)
retval = usb_serial_register(&cp2101_device);
if (retval)
- return retval; /*Failed to register*/
+ return retval; /* Failed to register */
retval = usb_register(&cp2101_driver);
if (retval) {
- /*Failed to register*/
+ /* Failed to register */
usb_serial_deregister(&cp2101_device);
return retval;
}
- /*Success*/
+ /* Success */
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f34a9bb6a219..012e63e05806 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -89,6 +89,7 @@ static int interval;
static struct usb_device_id id_table_earthmate [] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+ { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ } /* Terminating entry */
};
@@ -99,6 +100,7 @@ static struct usb_device_id id_table_cyphidcomrs232 [] = {
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+ { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1012ee6b19ce..1fa119efe41a 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -13,6 +13,7 @@
/* DeLorme Earthmate USB - a GPS device */
#define VENDOR_ID_DELORME 0x1163
#define PRODUCT_ID_EARTHMATEUSB 0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
/* Cypress HID->COM RS232 Adapter */
#define VENDOR_ID_CYPRESS 0x04b4
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 52394f08a947..d882fa3ad19a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -264,7 +264,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.1"
+#define DRIVER_VERSION "v1.4.2"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
@@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = {
{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+ { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
@@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = {
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
+ { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -684,6 +687,8 @@ struct ftdi_private {
char prev_status, diff_status; /* Used for TIOCMIWAIT */
__u8 rx_flags; /* receive state flags (throttling) */
spinlock_t rx_lock; /* spinlock for receive state */
+ struct work_struct rx_work;
+ int rx_processed;
__u16 interface; /* FT2232C port interface (0 for FT232/245) */
@@ -714,7 +719,7 @@ static int ftdi_write_room (struct usb_serial_port *port);
static int ftdi_chars_in_buffer (struct usb_serial_port *port);
static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void ftdi_process_read (struct usb_serial_port *port);
+static void ftdi_process_read (void *param);
static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
@@ -1213,7 +1218,7 @@ check_and_exit:
* ***************************************************************************
*/
-static ssize_t show_latency_timer(struct device *dev, char *buf)
+static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1240,7 +1245,7 @@ static ssize_t show_latency_timer(struct device *dev, char *buf)
}
/* Write a new value of the latency timer, in units of milliseconds. */
-static ssize_t store_latency_timer(struct device *dev, const char *valbuf,
+static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
@@ -1271,7 +1276,7 @@ static ssize_t store_latency_timer(struct device *dev, const char *valbuf,
/* Write an event character directly to the FTDI register. The ASCII
value is in the low 8 bits, with the enable bit in the 9th bit. */
-static ssize_t store_event_char(struct device *dev, const char *valbuf,
+static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
@@ -1384,6 +1389,8 @@ static int ftdi_common_startup (struct usb_serial *serial)
port->read_urb->transfer_buffer_length = BUFSZ;
}
+ INIT_WORK(&priv->rx_work, ftdi_process_read, port);
+
/* Free port's existing write urb and transfer buffer. */
if (port->write_urb) {
usb_free_urb (port->write_urb);
@@ -1614,6 +1621,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp)
spin_unlock_irqrestore(&priv->rx_lock, flags);
/* Start reading from the device */
+ priv->rx_processed = 0;
usb_fill_bulk_urb(port->read_urb, dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
@@ -1664,6 +1672,10 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
err("Error from RTS LOW urb");
}
} /* Note change no line if hupcl is off */
+
+ /* cancel any scheduled reading */
+ cancel_delayed_work(&priv->rx_work);
+ flush_scheduled_work();
/* shutdown our bulk read */
if (port->read_urb)
@@ -1859,23 +1871,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
return;
}
- /* If throttled, delay receive processing until unthrottled. */
- spin_lock(&priv->rx_lock);
- if (priv->rx_flags & THROTTLED) {
- dbg("Deferring read urb processing until unthrottled");
- priv->rx_flags |= ACTUALLY_THROTTLED;
- spin_unlock(&priv->rx_lock);
- return;
- }
- spin_unlock(&priv->rx_lock);
-
ftdi_process_read(port);
} /* ftdi_read_bulk_callback */
-static void ftdi_process_read (struct usb_serial_port *port)
+static void ftdi_process_read (void *param)
{ /* ftdi_process_read */
+ struct usb_serial_port *port = (struct usb_serial_port*)param;
struct urb *urb;
struct tty_struct *tty;
struct ftdi_private *priv;
@@ -1886,6 +1889,7 @@ static void ftdi_process_read (struct usb_serial_port *port)
int result;
int need_flip;
int packet_offset;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -1912,12 +1916,18 @@ static void ftdi_process_read (struct usb_serial_port *port)
data = urb->transfer_buffer;
- /* The first two bytes of every read packet are status */
- if (urb->actual_length > 2) {
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ if (priv->rx_processed) {
+ dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
+ priv->rx_processed,
+ urb->actual_length - priv->rx_processed);
} else {
- dbg("Status only: %03oo %03oo",data[0],data[1]);
- }
+ /* The first two bytes of every read packet are status */
+ if (urb->actual_length > 2) {
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ } else {
+ dbg("Status only: %03oo %03oo",data[0],data[1]);
+ }
+ }
/* TO DO -- check for hung up line and handle appropriately: */
@@ -1926,8 +1936,12 @@ static void ftdi_process_read (struct usb_serial_port *port)
/* if CD is dropped and the line is not CLOCAL then we should hangup */
need_flip = 0;
- for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ int length;
+
/* Compare new line status to the old one, signal if different */
+ /* N.B. packet may be processed more than once, but differences
+ * are only processed once. */
if (priv != NULL) {
char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
if (new_status != priv->prev_status) {
@@ -1937,6 +1951,35 @@ static void ftdi_process_read (struct usb_serial_port *port)
}
}
+ length = min(PKTSZ, urb->actual_length-packet_offset)-2;
+ if (length < 0) {
+ err("%s - bad packet length: %d", __FUNCTION__, length+2);
+ length = 0;
+ }
+
+ /* have to make sure we don't overflow the buffer
+ with tty_insert_flip_char's */
+ if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
+ tty_flip_buffer_push(tty);
+ need_flip = 0;
+
+ if (tty->flip.count != 0) {
+ /* flip didn't work, this happens when ftdi_process_read() is
+ * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
+ dbg("%s - flip buffer push failed", __FUNCTION__);
+ break;
+ }
+ }
+ if (priv->rx_flags & THROTTLED) {
+ dbg("%s - throttled", __FUNCTION__);
+ break;
+ }
+ if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
+ /* break out & wait for throttling/unthrottling to happen */
+ dbg("%s - receive room low", __FUNCTION__);
+ break;
+ }
+
/* Handle errors and break */
error_flag = TTY_NORMAL;
/* Although the device uses a bitmask and hence can have multiple */
@@ -1959,13 +2002,8 @@ static void ftdi_process_read (struct usb_serial_port *port)
error_flag = TTY_FRAME;
dbg("FRAMING error");
}
- if (urb->actual_length > packet_offset + 2) {
- for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) {
- /* have to make sure we don't overflow the buffer
- with tty_insert_flip_char's */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
+ if (length > 0) {
+ for (i = 2; i < length+2; i++) {
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
@@ -2002,6 +2040,35 @@ static void ftdi_process_read (struct usb_serial_port *port)
tty_flip_buffer_push(tty);
}
+ if (packet_offset < urb->actual_length) {
+ /* not completely processed - record progress */
+ priv->rx_processed = packet_offset;
+ dbg("%s - incomplete, %d bytes processed, %d remain",
+ __FUNCTION__, packet_offset,
+ urb->actual_length - packet_offset);
+ /* check if we were throttled while processing */
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ if (priv->rx_flags & THROTTLED) {
+ priv->rx_flags |= ACTUALLY_THROTTLED;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+ dbg("%s - deferring remainder until unthrottled",
+ __FUNCTION__);
+ return;
+ }
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+ /* if the port is closed stop trying to read */
+ if (port->open_count > 0){
+ /* delay processing of remainder */
+ schedule_delayed_work(&priv->rx_work, 1);
+ } else {
+ dbg("%s - port is closed", __FUNCTION__);
+ }
+ return;
+ }
+
+ /* urb is completely processed */
+ priv->rx_processed = 0;
+
/* if the port is closed stop trying to read */
if (port->open_count > 0){
/* Continue trying to always read */
@@ -2441,7 +2508,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port)
spin_unlock_irqrestore(&priv->rx_lock, flags);
if (actually_throttled)
- ftdi_process_read(port);
+ schedule_work(&priv->rx_work);
}
static int __init ftdi_init (void)
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a52bb13a9ce4..8866376823a5 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -144,6 +144,8 @@
/* ELV USB Module UO100 (PID sent by Stefan Frings) */
#define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */
+/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */
/*
* Definitions for ID TECH (www.idt-net.com) devices
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 000000000000..b722175f108f
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,729 @@
+/*
+ Option Card (PCMCIA to) USB to Serial Driver
+
+ Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
+
+ This driver is free software; you can redistribute it and/or modify
+ it under the terms of Version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+ History:
+
+ 2005-05-19 v0.1 Initial version, based on incomplete docs
+ and analysis of misbehavior of the standard driver
+ 2005-05-20 v0.2 Extended the input buffer to avoid losing
+ random 64-byte chunks of data
+ 2005-05-21 v0.3 implemented chars_in_buffer()
+ turned on low_latency
+ simplified the code somewhat
+*/
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+/* Function prototypes */
+static int option_open (struct usb_serial_port *port, struct file *filp);
+static void option_close (struct usb_serial_port *port, struct file *filp);
+static int option_startup (struct usb_serial *serial);
+static void option_shutdown (struct usb_serial *serial);
+static void option_rx_throttle (struct usb_serial_port *port);
+static void option_rx_unthrottle (struct usb_serial_port *port);
+static int option_write_room (struct usb_serial_port *port);
+
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
+
+
+static int option_write (struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+
+static int option_chars_in_buffer (struct usb_serial_port *port);
+static int option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void option_set_termios (struct usb_serial_port *port,
+ struct termios *old);
+static void option_break_ctl (struct usb_serial_port *port, int break_state);
+static int option_tiocmget (struct usb_serial_port *port, struct file *file);
+static int option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear);
+static int option_send_setup (struct usb_serial_port *port);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID 0x0AF0
+
+#define OPTION_PRODUCT_OLD 0x5000
+#define OPTION_PRODUCT_WLAN 0x6000
+
+static struct usb_device_id option_ids[] = {
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+static struct usb_driver option_driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = option_ids,
+};
+
+/* The card has three separate interfaces, wich the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+static struct usb_serial_device_type option_3port_device = {
+ .owner = THIS_MODULE,
+ .name = "Option 3-port card",
+ .short_name = "option",
+ .id_table = option_ids,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1, /* 3 */
+ .open = option_open,
+ .close = option_close,
+ .write = option_write,
+ .write_room = option_write_room,
+ .chars_in_buffer = option_chars_in_buffer,
+ .throttle = option_rx_throttle,
+ .unthrottle = option_rx_unthrottle,
+ .ioctl = option_ioctl,
+ .set_termios = option_set_termios,
+ .break_ctl = option_break_ctl,
+ .tiocmget = option_tiocmget,
+ .tiocmset = option_tiocmset,
+ .attach = option_startup,
+ .shutdown = option_shutdown,
+ .read_int_callback = option_instat_callback,
+};
+
+static int debug;
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 1
+#define IN_BUFLEN 1024
+#define OUT_BUFLEN 1024
+
+struct option_port_private {
+ /* Input endpoints and buffer for this port */
+ struct urb *in_urbs[N_IN_URB];
+ char in_buffer[N_IN_URB][IN_BUFLEN];
+ /* Output endpoints and buffer for this port */
+ struct urb *out_urbs[N_OUT_URB];
+ char out_buffer[N_OUT_URB][OUT_BUFLEN];
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+ // int break_on;
+
+ unsigned long tx_start_time[N_OUT_URB];
+};
+
+
+/* Functions used by new usb-serial code. */
+static int __init
+option_init (void)
+{
+ int retval;
+ retval = usb_serial_register(&option_3port_device);
+ if (retval)
+ goto failed_3port_device_register;
+ retval = usb_register(&option_driver);
+ if (retval)
+ goto failed_driver_register;
+
+ info(DRIVER_DESC ": " DRIVER_VERSION);
+
+ return 0;
+
+failed_driver_register:
+ usb_serial_deregister (&option_3port_device);
+failed_3port_device_register:
+ return retval;
+}
+
+static void __exit
+option_exit (void)
+{
+ usb_deregister (&option_driver);
+ usb_serial_deregister (&option_3port_device);
+}
+
+module_init(option_init);
+module_exit(option_exit);
+
+static void
+option_rx_throttle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_rx_unthrottle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_break_ctl (struct usb_serial_port *port, int break_state)
+{
+ /* Unfortunately, I don't know how to send a break */
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ dbg("%s", __FUNCTION__);
+
+ option_send_setup(port);
+}
+
+static int
+option_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ unsigned int value;
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+ ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+ ((portdata->cts_state) ? TIOCM_CTS : 0) |
+ ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+ ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+ ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+ return value;
+}
+
+static int
+option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (set & TIOCM_RTS)
+ portdata->rts_state = 1;
+ if (set & TIOCM_DTR)
+ portdata->dtr_state = 1;
+
+ if (clear & TIOCM_RTS)
+ portdata->rts_state = 0;
+ if (clear & TIOCM_DTR)
+ portdata->dtr_state = 0;
+ return option_send_setup(port);
+}
+
+static int
+option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+/* Write */
+static int
+option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct option_port_private *portdata;
+ int i;
+ int left, todo;
+ struct urb *this_urb = NULL; /* spurious */
+ int err;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s: write (%d chars)", __FUNCTION__, count);
+
+#if 0
+ spin_lock(&port->lock);
+ if (port->write_urb_busy) {
+ spin_unlock(&port->lock);
+ dbg("%s: already writing", __FUNCTION__);
+ return 0;
+ }
+ port->write_urb_busy = 1;
+ spin_unlock(&port->lock);
+#endif
+
+ i = 0;
+ left = count;
+ while (left>0) {
+ todo = left;
+ if (todo > OUT_BUFLEN)
+ todo = OUT_BUFLEN;
+
+ for (;i < N_OUT_URB; i++) {
+ /* Check we have a valid urb/endpoint before we use it... */
+ this_urb = portdata->out_urbs[i];
+ if (this_urb->status != -EINPROGRESS)
+ break;
+ if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
+ continue;
+ if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+ continue;
+ this_urb->transfer_flags |= URB_ASYNC_UNLINK;
+ usb_unlink_urb(this_urb);
+ }
+
+ if (i == N_OUT_URB) {
+ /* no bulk out free! */
+ dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ return count-left;
+ }
+
+ dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+
+ memcpy (this_urb->transfer_buffer, buf, todo);
+
+ /* send the data out the bulk port */
+ this_urb->transfer_buffer_length = todo;
+
+ this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ this_urb->dev = port->serial->dev;
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err) {
+ dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+ continue;
+ }
+ portdata->tx_start_time[i] = jiffies;
+ buf += todo;
+ left -= todo;
+ }
+
+ count -= left;
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ dbg("%s: wrote (did %d)", __FUNCTION__, count);
+ return count;
+}
+
+static void
+option_indat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+
+ dbg("%s: %p", __FUNCTION__, urb);
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+ port = (struct usb_serial_port *) urb->context;
+
+ if (urb->status) {
+ dbg("%s: nonzero status: %d on endpoint %02x.",
+ __FUNCTION__, urb->status, endpoint);
+ } else {
+ tty = port->tty;
+ if (urb->actual_length) {
+ for (i = 0; i < urb->actual_length ; ++i) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ tty_flip_buffer_push(tty);
+ tty_insert_flip_char(tty, data[i], 0);
+ }
+ tty_flip_buffer_push(tty);
+ } else {
+ dbg("%s: empty read urb received", __FUNCTION__);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ if (port->open_count && urb->status != -ESHUTDOWN) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+ }
+ }
+ return;
+}
+
+static void
+option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port;
+
+ dbg("%s", __FUNCTION__);
+
+ port = (struct usb_serial_port *) urb->context;
+
+ if (port->open_count)
+ schedule_work(&port->work);
+}
+
+static void
+option_instat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int err;
+ struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s", __FUNCTION__);
+ dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+
+ if (urb->status == 0) {
+ struct usb_ctrlrequest *req_pkt =
+ (struct usb_ctrlrequest *)urb->transfer_buffer;
+
+ if (!req_pkt) {
+ dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ return;
+ }
+ if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+ int old_dcd_state;
+ unsigned char signals = *((unsigned char *)
+ urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+
+ dbg("%s: signal x%x", __FUNCTION__, signals);
+
+ old_dcd_state = portdata->dcd_state;
+ portdata->cts_state = 1;
+ portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+ portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+ portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+ if (port->tty && !C_CLOCAL(port->tty)
+ && old_dcd_state && !portdata->dcd_state) {
+ tty_hangup(port->tty);
+ }
+ } else
+ dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+ } else
+ dbg("%s: error %d", __FUNCTION__, urb->status);
+
+ /* Resubmit urb so we continue receiving IRQ data */
+ if (urb->status != -ESHUTDOWN) {
+ urb->dev = serial->dev;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+ }
+}
+
+
+static int
+option_write_room (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status != -EINPROGRESS)
+ data_len += OUT_BUFLEN;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_chars_in_buffer (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status == -EINPROGRESS)
+ data_len += this_urb->transfer_buffer_length;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_open (struct usb_serial_port *port, struct file *filp)
+{
+ struct option_port_private *portdata;
+ struct usb_serial *serial = port->serial;
+ int i, err;
+ struct urb *urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s", __FUNCTION__);
+
+ /* Set some sane defaults */
+ portdata->rts_state = 1;
+ portdata->dtr_state = 1;
+
+ /* Reset low level data toggle and start reading from endpoints */
+ for (i = 0; i < N_IN_URB; i++) {
+ urb = portdata->in_urbs[i];
+ if (! urb)
+ continue;
+ if (urb->dev != serial->dev) {
+ dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+ continue;
+ }
+
+ /* make sure endpoint data toggle is synchronized with the device */
+
+ usb_clear_halt(urb->dev, urb->pipe);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+ urb->transfer_buffer_length);
+ }
+ }
+
+ /* Reset low level data toggle on out endpoints */
+ for (i = 0; i < N_OUT_URB; i++) {
+ urb = portdata->out_urbs[i];
+ if (! urb)
+ continue;
+ urb->dev = serial->dev;
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+ }
+
+ port->tty->low_latency = 1;
+
+ option_send_setup(port);
+
+ return (0);
+}
+
+static inline void
+stop_urb(struct urb *urb)
+{
+ if (urb && urb->status == -EINPROGRESS) {
+ urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(urb);
+ }
+}
+
+static void
+option_close(struct usb_serial_port *port, struct file *filp)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+ portdata = usb_get_serial_port_data(port);
+
+ portdata->rts_state = 0;
+ portdata->dtr_state = 0;
+
+ if (serial->dev) {
+ option_send_setup(port);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < N_IN_URB; i++)
+ stop_urb(portdata->in_urbs[i]);
+ for (i = 0; i < N_OUT_URB; i++)
+ stop_urb(portdata->out_urbs[i]);
+ }
+ port->tty = NULL;
+}
+
+
+/* Helper functions used by option_setup_urbs */
+static struct urb *
+option_setup_urb (struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *, struct pt_regs *regs))
+{
+ struct urb *urb;
+
+ if (endpoint == -1)
+ return NULL; /* endpoint not needed */
+
+ urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
+ if (urb == NULL) {
+ dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ return NULL;
+ }
+
+ /* Fill URB using supplied data. */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ return urb;
+}
+
+/* Setup urbs */
+static void
+option_setup_urbs(struct usb_serial *serial)
+{
+ int j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ port = serial->port[0];
+ portdata = usb_get_serial_port_data(port);
+
+ /* Do indat endpoints first */
+ for (j = 0; j <= N_IN_URB; ++j) {
+ portdata->in_urbs[j] = option_setup_urb (serial,
+ port->bulk_in_endpointAddress, USB_DIR_IN, port,
+ portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+ }
+
+ /* outdat endpoints */
+ for (j = 0; j <= N_OUT_URB; ++j) {
+ portdata->out_urbs[j] = option_setup_urb (serial,
+ port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+ portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ }
+}
+
+
+static int
+option_send_setup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (port->tty) {
+ int val = 0;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
+
+ return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ }
+
+ return 0;
+}
+
+
+static int
+option_startup (struct usb_serial *serial)
+{
+ int i, err;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Now setup per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+ if (!portdata) {
+ dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+ return (1);
+ }
+ memset(portdata, 0, sizeof(struct option_port_private));
+
+ usb_set_serial_port_data(port, portdata);
+
+ if (! port->interrupt_in_urb)
+ continue;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (err)
+ dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+ }
+
+ option_setup_urbs(serial);
+
+ return (0);
+}
+
+static void
+option_shutdown (struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ for (j = 0; j < N_IN_URB; j++)
+ stop_urb(portdata->in_urbs[j]);
+ for (j = 0; j < N_OUT_URB; j++)
+ stop_urb(portdata->out_urbs[j]);
+ }
+
+ /* Now free them */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ for (j = 0; j < N_IN_URB; j++) {
+ if (portdata->in_urbs[j]) {
+ usb_free_urb(portdata->in_urbs[j]);
+ portdata->in_urbs[j] = NULL;
+ }
+ }
+ for (j = 0; j < N_OUT_URB; j++) {
+ if (portdata->out_urbs[j]) {
+ usb_free_urb(portdata->out_urbs[j]);
+ portdata->out_urbs[j] = NULL;
+ }
+ }
+ }
+
+ /* Now free per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ }
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
+
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4536f63faaea..5da76dd8fb28 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void)
goto exit_bus;
}
- /* register the generic driver, if we should */
- result = usb_serial_generic_register(debug);
- if (result < 0) {
- err("%s - registering generic driver failed", __FUNCTION__);
- goto exit_generic;
- }
-
usb_serial_tty_driver->owner = THIS_MODULE;
usb_serial_tty_driver->driver_name = "usbserial";
usb_serial_tty_driver->devfs_name = "usb/tts/";
@@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void)
goto exit_tty;
}
+ /* register the generic driver, if we should */
+ result = usb_serial_generic_register(debug);
+ if (result < 0) {
+ err("%s - registering generic driver failed", __FUNCTION__);
+ goto exit_generic;
+ }
+
info(DRIVER_DESC " " DRIVER_VERSION);
return result;
+exit_generic:
+ usb_deregister(&usb_serial_driver);
+
exit_tty:
tty_unregister_driver(usb_serial_tty_driver);
exit_reg_driver:
- usb_serial_generic_deregister();
-
-exit_generic:
bus_unregister(&usb_serial_bus_type);
exit_bus:
OpenPOWER on IntegriCloud