diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 254 |
1 files changed, 127 insertions, 127 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d3dc1a15ec6c..bd76b4c11fcc 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1,16 +1,16 @@ /* * USB FTDI SIO driver * - * Copyright (C) 1999 - 2001 - * Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) * Bill Ryder (bryder@sgi.com) * Copyright (C) 2002 * Kuba Ober (kuba@mareimbrium.org) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this driver * @@ -32,7 +32,7 @@ * Changed full name of USB-UIRT device to avoid "/" character. * Added FTDI's alternate PID (0x6006) for FT232/245 devices. * Added PID for "ELV USB Module UO100" from Stefan Frings. - * + * * (21/Oct/2003) Ian Abbott * Renamed some VID/PID macros for Matrix Orbital and Perle Systems * devices. Removed Matrix Orbital and Perle Systems devices from the @@ -69,7 +69,7 @@ * does not incure any measurable overhead. This also relies on the fact * that we have proper reference counting logic for urbs. I nicked this * from Greg KH's Visor driver. - * + * * (23/Jun/2003) Ian Abbott * Reduced flip buffer pushes and corrected a data length test in * ftdi_read_bulk_callback. @@ -77,7 +77,7 @@ * * (21/Jun/2003) Erik Nygren * Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip. - * See <http://www.home-electro.com/tira1.htm>. Only operates properly + * See <http://www.home-electro.com/tira1.htm>. Only operates properly * at 100000 and RTS-CTS, so set custom divisor mode on startup. * Also force the Tira-1 and USB-UIRT to only use their custom baud rates. * @@ -137,17 +137,17 @@ * (17/Feb/2003) Bill Ryder * Added write urb buffer pool on a per device basis * Added more checking for open file on callbacks (fixed OOPS) - * Added CrystalFontz 632 and 634 PIDs + * Added CrystalFontz 632 and 634 PIDs * (thanx to CrystalFontz for the sample devices - they flushed out * some driver bugs) * Minor debugging message changes * Added throttle, unthrottle and chars_in_buffer functions * Fixed FTDI_SIO (the original device) bug * Fixed some shutdown handling - * - * - * - * + * + * + * + * * (07/Jun/2002) Kuba Ober * Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor * function. It was getting too complex. @@ -158,7 +158,7 @@ * * (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch * Not tested by me but it doesn't break anything I use. - * + * * (04/Jan/2002) Kuba Ober * Implemented 38400 baudrate kludge, where it can be substituted with other * values. That's the only way to set custom baudrates. @@ -179,7 +179,7 @@ * (the previous version caused panics) * Removed port iteration code since the device only has one I/O port and it * was wrong anyway. - * + * * (31/May/2001) gkh * Switched from using spinlock to a semaphore, which fixes lots of problems. * @@ -188,16 +188,16 @@ * Cleaned up comments for 8U232 * Added parity, framing and overrun error handling * Added receive break handling. - * + * * (04/08/2001) gb * Identify version on module load. - * + * * (18/March/2001) Bill Ryder * (Not released) * Added send break handling. (requires kernel patch too) * Fixed 8U232AM hardware RTS/CTS etc status reporting. * Added flipbuf fix copied from generic device - * + * * (12/3/2000) Bill Ryder * Added support for 8U232AM device. * Moved PID and VIDs into header file only. @@ -211,14 +211,14 @@ * Cleaned up comments. Removed multiple PID/VID definitions. * Factorised cts/dtr code * Made use of __FUNCTION__ in dbg's - * + * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (09/11/2000) gkh * Removed DEBUG #ifdefs with call to usb_serial_debug_data * @@ -226,11 +226,11 @@ * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * - * (04/04/2000) Bill Ryder + * (04/04/2000) Bill Ryder * Fixed bugs in TCGET/TCSET ioctls (by removing them - they are * handled elsewhere in the tty io driver chain). * - * (03/30/2000) Bill Ryder + * (03/30/2000) Bill Ryder * Implemented lots of ioctls * Fixed a race condition in write * Changed some dbg's to errs @@ -444,13 +444,13 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */ - { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, - { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, + { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, @@ -522,7 +522,7 @@ static struct usb_driver ftdi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, - .no_dynamic_id = 1, + .no_dynamic_id = 1, }; static const char *ftdi_chip_name[] = { @@ -548,13 +548,13 @@ struct ftdi_private { int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ __u16 last_set_data_urb_value ; /* the last data state set - needed for doing a break */ - int write_offset; /* This is the offset in the usb data block to write the serial data - + int write_offset; /* This is the offset in the usb data block to write the serial data - * it is different between devices */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ + char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ struct work_struct rx_work; @@ -721,7 +721,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned urb_value |= FTDI_SIO_SET_RTS_HIGH; rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_MODEM_CTRL_REQUEST, + FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, urb_value, priv->interface, buf, 0, WDR_TIMEOUT); @@ -768,7 +768,7 @@ static int change_speed(struct usb_serial_port *port) if (priv->interface) { /* FT2232C */ urb_index = (__u16)((urb_index << 8) | priv->interface); } - + rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_BAUDRATE_REQUEST, @@ -827,7 +827,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; + if (!baud) baud = 9600; switch(priv->chip_type) { case SIO: /* SIO chip */ switch(baud) { @@ -843,7 +843,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); + dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); div_value = ftdi_sio_b9600; div_okay = 0; } @@ -925,7 +925,7 @@ static int set_serial_info(struct usb_serial_port * port, struct serial_struct _ /* Make the changes - these are privileged changes! */ priv->flags = ((priv->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); + (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; @@ -950,7 +950,7 @@ check_and_exit: (old_priv.custom_divisor != priv->custom_divisor))) { change_speed(port); } - + return (0); } /* set_serial_info */ @@ -1022,18 +1022,18 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a struct usb_device *udev; unsigned short latency = 0; int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s",__FUNCTION__); - + rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, (char*) &latency, 1, WDR_TIMEOUT); - + if (rv < 0) { dev_err(dev, "Unable to read latency timer: %i", rv); return -EIO; @@ -1051,23 +1051,23 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute * char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s: setting latency timer = %i", __FUNCTION__, v); - + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, + v, priv->interface, buf, 0, WDR_TIMEOUT); - + if (rv < 0) { dev_err(dev, "Unable to write latency timer: %i", rv); return -EIO; } - + return count; } @@ -1082,23 +1082,23 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s: setting event char = %i", __FUNCTION__, v); - + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, - v, priv->interface, + v, priv->interface, buf, 0, WDR_TIMEOUT); - + if (rv < 0) { dbg("Unable to write event character: %i", rv); return -EIO; } - + return count; } @@ -1135,11 +1135,11 @@ static void remove_sysfs_attrs(struct usb_serial *serial) struct ftdi_private *priv; struct usb_device *udev; - dbg("%s",__FUNCTION__); + dbg("%s",__FUNCTION__); priv = usb_get_serial_port_data(serial->port[0]); udev = serial->dev; - + /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { device_remove_file(&udev->dev, &dev_attr_event_char); @@ -1147,7 +1147,7 @@ static void remove_sysfs_attrs(struct usb_serial *serial) device_remove_file(&udev->dev, &dev_attr_latency_timer); } } - + } /* @@ -1258,7 +1258,7 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) } /* ftdi_HE_TIRA1_setup */ -/* ftdi_shutdown is called from usbserial:usb_serial_disconnect +/* ftdi_shutdown is called from usbserial:usb_serial_disconnect * it is called when the usb device is disconnected * * usbserial:usb_serial_disconnect @@ -1269,16 +1269,16 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) static void ftdi_shutdown (struct usb_serial *serial) { /* ftdi_shutdown */ - + struct usb_serial_port *port = serial->port[0]; struct ftdi_private *priv = usb_get_serial_port_data(port); dbg("%s", __FUNCTION__); remove_sysfs_attrs(serial); - - /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) + + /* all open ports are closed at this point + * (by usbserial.c:__serial_close, which calls ftdi_close) */ if (priv) { @@ -1293,7 +1293,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - + int result = 0; char buf[1]; /* Needed for the usb_control_msg I think */ @@ -1312,8 +1312,8 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, - FTDI_SIO_RESET_SIO, + FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, + FTDI_SIO_RESET_SIO, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change @@ -1350,12 +1350,12 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) -/* +/* * usbserial:__serial_close only calls ftdi_close if the point is open * * This only gets called when it is the last close - * - * + * + * */ static void ftdi_close (struct usb_serial_port *port, struct file *filp) @@ -1368,14 +1368,14 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) if (c_cflag & HUPCL){ /* Disable flow control */ - if (usb_control_msg(port->serial->dev, + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("error from flowcontrol urb"); - } + } /* drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); @@ -1384,14 +1384,14 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) /* cancel any scheduled reading */ cancel_delayed_work(&priv->rx_work); flush_scheduled_work(); - + /* shutdown our bulk read */ if (port->read_urb) usb_kill_urb(port->read_urb); } /* ftdi_close */ - + /* The SIO requires the first byte to have: * B0 1 * B1 0 @@ -1423,7 +1423,7 @@ static int ftdi_write (struct usb_serial_port *port, return 0; } spin_unlock_irqrestore(&priv->tx_lock, flags); - + data_offset = priv->write_offset; dbg("data_offset set to %d",data_offset); @@ -1462,7 +1462,7 @@ static int ftdi_write (struct usb_serial_port *port, user_pktsz = todo; } /* Write the control byte at the front of the packet*/ - *first_byte = 1 | ((user_pktsz) << 2); + *first_byte = 1 | ((user_pktsz) << 2); /* Copy data for packet */ memcpy (first_byte + data_offset, current_position, user_pktsz); @@ -1479,7 +1479,7 @@ static int ftdi_write (struct usb_serial_port *port, usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer); /* fill the buffer and send it */ - usb_fill_bulk_urb(urb, port->serial->dev, + usb_fill_bulk_urb(urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), buffer, transfer_size, ftdi_write_bulk_callback, port); @@ -1520,7 +1520,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) kfree (urb->transfer_buffer); dbg("%s - port %d", __FUNCTION__, port->number); - + if (urb->status) { dbg("nonzero write bulk status received: %d", urb->status); return; @@ -1651,7 +1651,7 @@ static void ftdi_process_read (void *param) struct tty_struct *tty; struct ftdi_private *priv; char error_flag; - unsigned char *data; + unsigned char *data; int i; int result; @@ -1759,7 +1759,7 @@ static void ftdi_process_read (void *param) } if (length > 0) { for (i = 2; i < length+2; i++) { - /* Note that the error flag is duplicated for + /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ tty_insert_flip_char(tty, data[packet_offset+i], error_flag); @@ -1773,7 +1773,7 @@ static void ftdi_process_read (void *param) This doesn't work well since the application receives a never ending stream of bad data - even though new data hasn't been sent. Therefore I (bill) have taken this out. - However - this might make sense for framing errors and so on + However - this might make sense for framing errors and so on so I am leaving the code in for now. */ else { @@ -1827,7 +1827,7 @@ static void ftdi_process_read (void *param) /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ftdi_read_bulk_callback, port); @@ -1844,9 +1844,9 @@ static void ftdi_process_read (void *param) static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) { struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value = 0; + __u16 urb_value = 0; char buf[1]; - + /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ /* last_set_data_urb_value NEVER has the break bit set in it */ @@ -1854,20 +1854,20 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) if (break_state) { urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; } else { - urb_value = priv->last_set_data_urb_value; + urb_value = priv->last_set_data_urb_value; } - + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state); - } + } dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value); - + } @@ -1883,12 +1883,12 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ struct ftdi_private *priv = usb_get_serial_port_data(port); __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ - + // Added for xon/xoff support unsigned int iflag = port->tty->termios->c_iflag; unsigned char vstop; unsigned char vstart; - + dbg("%s", __FUNCTION__); /* Force baud rate if this device requires it, unless it is set to B0. */ @@ -1906,20 +1906,20 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ cflag = port->tty->termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to + /* FIXME -For this cut I don't care if the line is really changing or + not - so just do the change regardless - should be able to compare old_termios and tty->termios */ - /* NOTE These routines can get interrupted by - ftdi_sio_read_bulk_callback - need to examine what this + /* NOTE These routines can get interrupted by + ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ - + /* Set number of data bits, parity, stop bits */ - + urb_value = 0; urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : FTDI_SIO_SET_DATA_STOP_BITS_1); - urb_value |= (cflag & PARENB ? - (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : + urb_value |= (cflag & PARENB ? + (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : FTDI_SIO_SET_DATA_PARITY_EVEN) : FTDI_SIO_SET_DATA_PARITY_NONE); if (cflag & CSIZE) { @@ -1936,25 +1936,25 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* This is needed by the break command since it uses the same command - but is * or'ed with this value */ priv->last_set_data_urb_value = urb_value; - + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { err("%s FAILED to set databits/stopbits/parity", __FUNCTION__); - } + } /* Now do the baudrate */ if ((cflag & CBAUD) == B0 ) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("%s error from disable flowcontrol urb", __FUNCTION__); - } + } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { @@ -1972,16 +1972,16 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __FUNCTION__); - if (usb_control_msg(dev, + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to set to rts/cts flow control"); - } - - } else { + } + + } else { /* * Xon/Xoff code * @@ -2011,16 +2011,16 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ dbg("%s Turning off hardware flow control", __FUNCTION__); - if (usb_control_msg(dev, + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to clear flow control"); - } + } } - + } return; } /* ftdi_termios */ @@ -2036,11 +2036,11 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) switch (priv->chip_type) { case SIO: /* Request the status from the device */ - if ((ret = usb_control_msg(port->serial->dev, + if ((ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, 0, + 0, 0, buf, 1, WDR_TIMEOUT)) < 0 ) { err("%s Could not get modem status of device - err: %d", __FUNCTION__, ret); @@ -2052,11 +2052,11 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) case FT2232C: /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same format as the data returned from the in point */ - if ((ret = usb_control_msg(port->serial->dev, + if ((ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 2, WDR_TIMEOUT)) < 0 ) { err("%s Could not get modem status of device - err: %d", __FUNCTION__, ret); @@ -2067,12 +2067,12 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) return -EFAULT; break; } - + return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | - priv->last_dtr_rts; + priv->last_dtr_rts; } static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) @@ -2138,11 +2138,11 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne break; default: break; - + } - /* This is not necessarily an error - turns out the higher layers will do + /* This is not necessarily an error - turns out the higher layers will do * some ioctls itself (see comment above) */ dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd); @@ -2199,7 +2199,7 @@ static int __init ftdi_init (void) if (retval) goto failed_sio_register; retval = usb_register(&ftdi_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_VERSION ":" DRIVER_DESC); |
