summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/ftdi_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r--drivers/usb/serial/ftdi_sio.c158
1 files changed, 89 insertions, 69 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ab8474b00cb..683304d60615 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -89,6 +89,7 @@ struct ftdi_private {
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
+ unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
+ .dtr_rts = ftdi_dtr_rts,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
@@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
return rv;
}
+static int write_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ char buf[1];
+ int rv = 0;
+ int l = priv->latency;
+
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ l = 1;
+
+ dbg("%s: setting latency timer = %i", __func__, l);
+
+ rv = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ l, priv->interface,
+ buf, 0, WDR_TIMEOUT);
+
+ if (rv < 0)
+ dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+ return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ unsigned short latency = 0;
+ int rv = 0;
+
+
+ dbg("%s", __func__);
+ rv = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+ 0, priv->interface,
+ (char *) &latency, 1, WDR_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+ return -EIO;
+ }
+ return latency;
+}
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty,
priv->custom_divisor = new_serial.custom_divisor;
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
-
- dbg("%s", __func__);
-
- rv = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
- 0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return sprintf(buf, "%i\n", latency);
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "%i\n", priv->latency);
}
+
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting latency timer = %i", __func__, v);
-
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to write latency timer: %i\n", rv);
+ priv->latency = v;
+ rv = write_latency_timer(port);
+ if (rv < 0)
return -EIO;
- }
-
return count;
}
@@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
}
@@ -1487,14 +1512,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
remove_sysfs_attrs(port);
- /* all open ports are closed at this point
- * (by usbserial.c:__serial_close, which calls ftdi_close)
- */
-
- if (priv) {
- usb_set_serial_port_data(port, NULL);
- kref_put(&priv->kref, ftdi_sio_priv_release);
- }
+ kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
@@ -1521,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty,
if (tty)
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
+
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1536,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty,
if (tty)
ftdi_set_termios(tty, port, tty->termios);
- /* FIXME: Flow control might be enabled, so it should be checked -
- we have no control of defaults! */
- /* Turn on RTS and DTR since we are not flow controlling by default */
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
/* Not throttled */
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1565,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty,
} /* ftdi_open */
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ char buf[1];
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on && usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface, buf, 0,
+ WDR_TIMEOUT) < 0) {
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ }
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
@@ -1574,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty,
*
*/
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
{ /* ftdi_close */
- unsigned int c_cflag = tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
dbg("%s", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* Disable flow control */
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
- WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
- }
-
- /* drop RTS and DTR */
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- } /* Note change no line if hupcl is off */
- mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
cancel_delayed_work_sync(&priv->rx_work);
OpenPOWER on IntegriCloud