diff options
Diffstat (limited to 'drivers/usb/net/zaurus.c')
| -rw-r--r-- | drivers/usb/net/zaurus.c | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c new file mode 100644 index 000000000000..ee3b892aeabc --- /dev/null +++ b/drivers/usb/net/zaurus.c @@ -0,0 +1,386 @@ +/* + * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz> + * Copyright (C) 2002-2005 by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +// #define DEBUG // error path messages, extra info +// #define VERBOSE // more; success messages + +#include <linux/config.h> +#ifdef CONFIG_USB_DEBUG +# define DEBUG +#endif +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <linux/usb.h> +#include <linux/usb_cdc.h> + +#include "usbnet.h" + + +/* + * All known Zaurii lie about their standards conformance. At least + * the earliest SA-1100 models lie by saying they support CDC Ethernet. + * Some later models (especially PXA-25x and PXA-27x based ones) lie + * and say they support CDC MDLM (for access to cell phone modems). + * + * There are non-Zaurus products that use these same protocols too. + * + * The annoying thing is that at the same time Sharp was developing + * that annoying standards-breaking software, the Linux community had + * a simple "CDC Subset" working reliably on the same SA-1100 hardware. + * That is, the same functionality but not violating standards. + * + * The CDC Ethernet nonconformance points are troublesome to hosts + * with a true CDC Ethernet implementation: + * - Framing appends a CRC, which the spec says drivers "must not" do; + * - Transfers data in altsetting zero, instead of altsetting 1; + * - All these peripherals use the same ethernet address. + * + * The CDC MDLM nonconformance is less immediately troublesome, since all + * MDLM implementations are quasi-proprietary anyway. + */ + +static struct sk_buff * +zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +{ + int padlen; + struct sk_buff *skb2; + + padlen = 2; + if (!skb_cloned(skb)) { + int tailroom = skb_tailroom(skb); + if ((padlen + 4) <= tailroom) + goto done; + } + skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (skb) { + u32 fcs; +done: + fcs = crc32_le(~0, skb->data, skb->len); + fcs = ~fcs; + + *skb_put (skb, 1) = fcs & 0xff; + *skb_put (skb, 1) = (fcs>> 8) & 0xff; + *skb_put (skb, 1) = (fcs>>16) & 0xff; + *skb_put (skb, 1) = (fcs>>24) & 0xff; + } + return skb; +} + +static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf) +{ + /* Belcarra's funky framing has other options; mostly + * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes. + */ + dev->net->hard_header_len += 6; + dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; + return usbnet_generic_cdc_bind(dev, intf); +} + +/* PDA style devices are always connected if present */ +static int always_connected (struct usbnet *dev) +{ + return 0; +} + +static const struct driver_info zaurus_sl5x00_info = { + .description = "Sharp Zaurus SL-5x00", + .flags = FLAG_FRAMING_Z, + .check_connect = always_connected, + .bind = zaurus_bind, + .unbind = usbnet_cdc_unbind, + .tx_fixup = zaurus_tx_fixup, +}; +#define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info) + +static const struct driver_info zaurus_pxa_info = { + .description = "Sharp Zaurus, PXA-2xx based", + .flags = FLAG_FRAMING_Z, + .check_connect = always_connected, + .bind = zaurus_bind, + .unbind = usbnet_cdc_unbind, + .tx_fixup = zaurus_tx_fixup, +}; +#define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info) + +static const struct driver_info olympus_mxl_info = { + .description = "Olympus R1000", + .flags = FLAG_FRAMING_Z, + .check_connect = always_connected, + .bind = zaurus_bind, + .unbind = usbnet_cdc_unbind, + .tx_fixup = zaurus_tx_fixup, +}; +#define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info) + + +/* Some more recent products using Lineo/Belcarra code will wrongly claim + * CDC MDLM conformance. They aren't conformant: data endpoints live + * in the control interface, there's no data interface, and it's not used + * to talk to a cell phone radio. But at least we can detect these two + * pseudo-classes, rather than growing this product list with entries for + * each new nonconformant product (sigh). + */ +static const u8 safe_guid[16] = { + 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, + 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, +}; +static const u8 blan_guid[16] = { + 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70, + 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37, +}; + +static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf) +{ + u8 *buf = intf->cur_altsetting->extra; + int len = intf->cur_altsetting->extralen; + struct usb_cdc_mdlm_desc *desc = NULL; + struct usb_cdc_mdlm_detail_desc *detail = NULL; + + while (len > 3) { + if (buf [1] != USB_DT_CS_INTERFACE) + goto next_desc; + + /* use bDescriptorSubType, and just verify that we get a + * "BLAN" (or "SAFE") descriptor. + */ + switch (buf [2]) { + case USB_CDC_MDLM_TYPE: + if (desc) { + dev_dbg(&intf->dev, "extra MDLM\n"); + goto bad_desc; + } + desc = (void *) buf; + if (desc->bLength != sizeof *desc) { + dev_dbg(&intf->dev, "MDLM len %u\n", + desc->bLength); + goto bad_desc; + } + /* expect bcdVersion 1.0, ignore */ + if (memcmp(&desc->bGUID, blan_guid, 16) + && memcmp(&desc->bGUID, safe_guid, 16) ) { + /* hey, this one might _really_ be MDLM! */ + dev_dbg(&intf->dev, "MDLM guid\n"); + goto bad_desc; + } + break; + case USB_CDC_MDLM_DETAIL_TYPE: + if (detail) { + dev_dbg(&intf->dev, "extra MDLM detail\n"); + goto bad_desc; + } + detail = (void *) buf; + switch (detail->bGuidDescriptorType) { + case 0: /* "SAFE" */ + if (detail->bLength != (sizeof *detail + 2)) + goto bad_detail; + break; + case 1: /* "BLAN" */ + if (detail->bLength != (sizeof *detail + 3)) + goto bad_detail; + break; + default: + goto bad_detail; + } + + /* assuming we either noticed BLAN already, or will + * find it soon, there are some data bytes here: + * - bmNetworkCapabilities (unused) + * - bmDataCapabilities (bits, see below) + * - bPad (ignored, for PADAFTER -- BLAN-only) + * bits are: + * - 0x01 -- Zaurus framing (add CRC) + * - 0x02 -- PADBEFORE (CRC includes some padding) + * - 0x04 -- PADAFTER (some padding after CRC) + * - 0x08 -- "fermat" packet mangling (for hw bugs) + * the PADBEFORE appears not to matter; we interop + * with devices that use it and those that don't. + */ + if ((detail->bDetailData[1] & ~0x02) != 0x01) { + /* bmDataCapabilites == 0 would be fine too, + * but framing is minidriver-coupled for now. + */ +bad_detail: + dev_dbg(&intf->dev, + "bad MDLM detail, %d %d %d\n", + detail->bLength, + detail->bDetailData[0], + detail->bDetailData[2]); + goto bad_desc; + } + break; + } +next_desc: + len -= buf [0]; /* bLength */ + buf += buf [0]; + } + + if (!desc || !detail) { + dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n", + desc ? "" : "func ", + detail ? "" : "detail "); + goto bad_desc; + } + + /* There's probably a CDC Ethernet descriptor there, but we can't + * rely on the Ethernet address it provides since not all vendors + * bother to make it unique. Likewise there's no point in tracking + * of the CDC event notifications. + */ + return usbnet_get_endpoints(dev, intf); + +bad_desc: + dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n"); + return -ENODEV; +} + +static const struct driver_info bogus_mdlm_info = { + .description = "pseudo-MDLM (BLAN) device", + .flags = FLAG_FRAMING_Z, + .check_connect = always_connected, + .tx_fixup = zaurus_tx_fixup, + .bind = blan_mdlm_bind, +}; + +static const struct usb_device_id products [] = { +#define ZAURUS_MASTER_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + +/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8004, + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_STRONGARM_INFO, +}, + +/* PXA-2xx based models are also lying-about-cdc. If you add any + * more devices that claim to be CDC Ethernet, make sure they get + * added to the blacklist in cdc_ether too. + * + * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries, + * unlike the older ones with 2.4 "embedix" kernels. + */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8005, /* A-300 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8006, /* B-500/SL-5600 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8007, /* C-700 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9031, /* C-750 C-760 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + /* reported with some C860 units */ + .idProduct = 0x9050, /* C-860 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = ZAURUS_PXA_INFO, +}, + + +/* At least some of the newest PXA units have very different lies about + * their standards support: they claim to be cell phones offering + * direct access to their radios! (No, they don't conform to CDC MDLM.) + */ +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, +}, + +/* Olympus has some models with a Zaurus-compatible option. + * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) + */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x07B4, + .idProduct = 0x0F02, /* R-1000 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = OLYMPUS_MXL_INFO, +}, + { }, // END +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver zaurus_driver = { + .owner = THIS_MODULE, + .name = "zaurus", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + +static int __init zaurus_init(void) +{ + return usb_register(&zaurus_driver); +} +module_init(zaurus_init); + +static void __exit zaurus_exit(void) +{ + usb_deregister(&zaurus_driver); +} +module_exit(zaurus_exit); + +MODULE_AUTHOR("Pavel Machek, David Brownell"); +MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products"); +MODULE_LICENSE("GPL"); |
