1 files changed, 156 insertions, 0 deletions
diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c
new file mode 100644
index 000000000000..74c2b3581c76
--- /dev/null
+++ b/drivers/usb/net/plusb.c
@@ -0,0 +1,156 @@
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/config.h>
+#ifdef	CONFIG_USB_DEBUG
+#   define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP:  this handshaking isn't all that robust.  This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 deveopers) does
+ * the handshaking much better!   Also, sometimes this hardware
+ * seems to get wedged under load.  Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define	PL_S_EN		(1<<7)		/* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define	PL_TX_READY	(1<<5)		/* (interrupt only) transmit ready */
+#define	PL_RESET_OUT	(1<<4)		/* reset output pipe */
+#define	PL_RESET_IN	(1<<3)		/* reset input pipe */
+#define	PL_TX_C		(1<<2)		/* transmission complete */
+#define	PL_TX_REQ	(1<<1)		/* transmission received */
+#define	PL_PEER_E	(1<<0)		/* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+	return usb_control_msg(dev->udev,
+		usb_rcvctrlpipe(dev->udev, 0),
+		req,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		val, index,
+		NULL, 0,
+		USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+	/* some units seem to need this reset, others reject it utterly.
+	 * FIXME be more like "naplink" or windows drivers.
+	 */
+	(void) pl_set_QuickLink_features(dev,
+		PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+	return 0;
+}
+
+static const struct driver_info	prolific_info = {
+	.description =	"Prolific PL-2301/PL-2302",
+	.flags =	FLAG_NO_SETINT,
+		/* some PL-2302 versions seem to fail usb_set_interface() */
+	.reset =	pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id	products [] = {
+
+{
+	USB_DEVICE(0x067b, 0x0000),	// PL-2301
+	.driver_info =	(unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x067b, 0x0001),	// PL-2302
+	.driver_info =	(unsigned long) &prolific_info,
+},
+
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+	.owner =	THIS_MODULE,
+	.name =		"plusb",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+};
+
+static int __init plusb_init(void)
+{
+ 	return usb_register(&plusb_driver);
+}
+module_init(plusb_init);
+
+static void __exit plusb_exit(void)
+{
+ 	usb_deregister(&plusb_driver);
+}
+module_exit(plusb_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");