diff options
Diffstat (limited to 'drivers/usb/musb')
| -rw-r--r-- | drivers/usb/musb/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/usb/musb/blackfin.c | 28 | ||||
| -rw-r--r-- | drivers/usb/musb/cppi_dma.c | 33 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 564 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_core.h | 74 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_gadget.c | 20 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_host.c | 34 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_regs.h | 101 | ||||
| -rw-r--r-- | drivers/usb/musb/musbhsdma.c | 25 | ||||
| -rw-r--r-- | drivers/usb/musb/musbhsdma.h | 17 | ||||
| -rw-r--r-- | drivers/usb/musb/omap2430.c | 48 | ||||
| -rw-r--r-- | drivers/usb/musb/omap2430.h | 32 | ||||
| -rw-r--r-- | drivers/usb/musb/tusb6010.c | 2 | ||||
| -rw-r--r-- | drivers/usb/musb/tusb6010_omap.c | 2 |
14 files changed, 665 insertions, 321 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index d9db86498022..b4c783c284ba 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -37,7 +37,7 @@ config USB_MUSB_SOC depends on USB_MUSB_HDRC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default y if (BF54x && !BF544) default y if (BF52x && !BF522 && !BF523) @@ -48,7 +48,7 @@ comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 comment "OMAP 343x high speed USB support" - depends on USB_MUSB_HDRC && ARCH_OMAP34XX + depends on USB_MUSB_HDRC && ARCH_OMAP3 comment "Blackfin high speed USB Support" depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) @@ -153,7 +153,7 @@ config MUSB_PIO_ONLY config USB_INVENTRA_DMA bool depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY - default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN + default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ad26e6569665..bcee1339d4fd 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -30,7 +30,6 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; prefetch((u8 *)src); @@ -42,15 +41,17 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); if (!ANOMALY_05000380 && epnum != 0) { - flush_dcache_range((unsigned int)src, - (unsigned int)(src + len)); + u16 dma_reg; + + flush_dcache_range((unsigned long)src, + (unsigned long)(src + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) src & 0xFFFF); + dma_reg = (u32)src; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + dma_reg = (u32)src >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); @@ -79,12 +80,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) SSYNC(); if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); + outsw_8((unsigned long)fifo, src, (len + 1) >> 1); else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - + outsw((unsigned long)fifo, src, (len + 1) >> 1); } } /* @@ -94,19 +92,19 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; u8 epnum = hw_ep->epnum; - u16 dma_reg = 0; if (ANOMALY_05000467 && epnum != 0) { + u16 dma_reg; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + invalidate_dcache_range((unsigned long)dst, + (unsigned long)(dst + len)); /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); + dma_reg = (u32)dst; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); SSYNC(); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + dma_reg = (u32)dst >> 16; bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); SSYNC(); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index a44a450c860d..3c69a76ec392 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1191,8 +1191,13 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) bd = tx_ch->head; + /* + * If Head is null then this could mean that a abort interrupt + * that needs to be acknowledged. + */ if (NULL == bd) { DBG(1, "null BD\n"); + tx_ram->tx_complete = 0; continue; } @@ -1412,15 +1417,6 @@ static int cppi_channel_abort(struct dma_channel *channel) if (cppi_ch->transmit) { struct cppi_tx_stateram __iomem *tx_ram; - int enabled; - - /* mask interrupts raised to signal teardown complete. */ - enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG) - & (1 << cppi_ch->index); - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG, - (1 << cppi_ch->index)); - /* REVISIT put timeouts on these controller handshakes */ cppi_dump_tx(6, cppi_ch, " (teardown)"); @@ -1435,7 +1431,6 @@ static int cppi_channel_abort(struct dma_channel *channel) do { value = musb_readl(&tx_ram->tx_complete, 0); } while (0xFFFFFFFC != value); - musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC); /* FIXME clean up the transfer state ... here? * the completion routine should get called with @@ -1448,23 +1443,15 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* While we scrub the TX state RAM, ensure that we clean - * up any interrupt that's currently asserted: + /* * 1. Write to completion Ptr value 0x1(bit 0 set) * (write back mode) - * 2. Write to completion Ptr value 0x0(bit 0 cleared) - * (compare mode) - * Value written is compared(for bits 31:2) and when - * equal, interrupt is deasserted. + * 2. Wait for abort interrupt and then put the channel in + * compare mode by writing 1 to the tx_complete register. */ cppi_reset_tx(tx_ram, 1); - musb_writel(&tx_ram->tx_complete, 0, 0); - - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - + cppi_ch->head = 0; + musb_writel(&tx_ram->tx_complete, 0, 1); cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5eb9318cff77..b4bbf8f2c238 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -557,6 +557,69 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, handled = IRQ_HANDLED; } + + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", + otg_state_string(musb), devctl, power); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; +#endif + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->gadget->b_hnp_enable; + if (musb->is_active) { +#ifdef CONFIG_USB_MUSB_OTG + musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); +#endif + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->host->b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + DBG(1, "REVISIT: SUSPEND as B_HOST\n"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } + } + if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); @@ -625,10 +688,61 @@ b_host: } #endif /* CONFIG_USB_MUSB_HDRC_HCD */ + if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { + DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", + otg_state_string(musb), + MUSB_MODE(musb), devctl); + handled = IRQ_HANDLED; + + switch (musb->xceiv->state) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; +#endif /* HOST */ +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + musb_to_hcd(musb)->self.is_b_host = 0; + musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ +#endif /* OTG */ +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; +#endif /* GADGET */ + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + otg_state_string(musb)); + break; + } + } + /* mentor saves a bit: bus reset and babble share the same irq. * only host sees babble; only peripheral sees bus reset. */ if (int_usb & MUSB_INTR_RESET) { + handled = IRQ_HANDLED; if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { /* * Looks like non-HS BABBLE can be ignored, but @@ -641,7 +755,7 @@ b_host: DBG(1, "BABBLE devctl: %02x\n", devctl); else { ERR("Stopping host session -- babble\n"); - musb_writeb(mbase, MUSB_DEVCTL, 0); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } } else if (is_peripheral_capable()) { DBG(1, "BUS RESET as %s\n", otg_state_string(musb)); @@ -686,29 +800,7 @@ b_host: otg_state_string(musb)); } } - - handled = IRQ_HANDLED; } - schedule_work(&musb->irq_work); - - return handled; -} - -/* - * Interrupt Service Routine to record USB "global" interrupts. - * Since these do not happen often and signify things of - * paramount importance, it seems OK to check them individually; - * the order of the tests is specified in the manual - * - * @param musb instance pointer - * @param int_usb register contents - * @param devctl - * @param power - */ -static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, - u8 devctl, u8 power) -{ - irqreturn_t handled = IRQ_NONE; #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or @@ -755,117 +847,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, } #endif - if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { - DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", - otg_state_string(musb), - MUSB_MODE(musb), devctl); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; -#endif /* HOST */ -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - musb_to_hcd(musb)->self.is_b_host = 0; - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ -#endif /* OTG */ -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; -#endif /* GADGET */ - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - otg_state_string(musb)); - break; - } - - schedule_work(&musb->irq_work); - } - - if (int_usb & MUSB_INTR_SUSPEND) { - DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", - otg_state_string(musb), devctl, power); - handled = IRQ_HANDLED; - - switch (musb->xceiv->state) { -#ifdef CONFIG_USB_MUSB_OTG - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - usb_hcd_resume_root_hub(musb_to_hcd(musb)); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - break; -#endif - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->gadget->b_hnp_enable; - if (musb->is_active) { -#ifdef CONFIG_USB_MUSB_OTG - musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - DBG(1, "HNP: Setting timer for b_ase0_brst\n"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); -#endif - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && musb->xceiv->host->b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - DBG(1, "REVISIT: SUSPEND as B_HOST\n"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } - schedule_work(&musb->irq_work); - } - + schedule_work(&musb->irq_work); return handled; } @@ -1000,7 +982,7 @@ static void musb_shutdown(struct platform_device *pdev) * more than selecting one of a bunch of predefined configurations. */ #if defined(CONFIG_USB_TUSB6010) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) static ushort __initdata fifo_mode = 4; #else static ushort __initdata fifo_mode = 2; @@ -1095,6 +1077,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = { { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, }; +/* mode 5 - fits in 8KB */ +static struct fifo_cfg __initdata mode_5_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, +{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, +{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, +}; /* * configure a fifo; for non-shared endpoints, this may be called @@ -1210,6 +1222,10 @@ static int __init ep_config_from_table(struct musb *musb) cfg = mode_4_cfg; n = ARRAY_SIZE(mode_4_cfg); break; + case 5: + cfg = mode_5_cfg; + n = ARRAY_SIZE(mode_5_cfg); + break; } printk(KERN_DEBUG "%s: setup fifo_mode %d\n", @@ -1314,9 +1330,6 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; */ static int __init musb_core_init(u16 musb_type, struct musb *musb) { -#ifdef MUSB_AHB_ID - u32 data; -#endif u8 reg; char *type; char aInfo[90], aRevision[32], aDate[12]; @@ -1328,23 +1341,17 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) reg = musb_read_configdata(mbase); strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); - if (reg & MUSB_CONFIGDATA_DYNFIFO) + if (reg & MUSB_CONFIGDATA_DYNFIFO) { strcat(aInfo, ", dyn FIFOs"); + musb->dyn_fifo = true; + } if (reg & MUSB_CONFIGDATA_MPRXE) { strcat(aInfo, ", bulk combine"); -#ifdef C_MP_RX musb->bulk_combine = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_MPTXE) { strcat(aInfo, ", bulk split"); -#ifdef C_MP_TX musb->bulk_split = true; -#else - strcat(aInfo, " (X)"); /* no driver support */ -#endif } if (reg & MUSB_CONFIGDATA_HBRXE) { strcat(aInfo, ", HB-ISO Rx"); @@ -1360,20 +1367,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); -#ifdef MUSB_AHB_ID - data = musb_readl(mbase, 0x404); - sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff), - (data >> 16) & 0xff, (data >> 24) & 0xff); - /* FIXME ID2 and ID3 are unused */ - data = musb_readl(mbase, 0x408); - printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data); - data = musb_readl(mbase, 0x40c); - printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data); - reg = musb_readb(mbase, 0x400); - musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC; -#else aDate[0] = 0; -#endif if (MUSB_CONTROLLER_MHDRC == musb_type) { musb->is_multipoint = 1; type = "M"; @@ -1404,21 +1398,10 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) musb->nr_endpoints = 1; musb->epmask = 1; - if (reg & MUSB_CONFIGDATA_DYNFIFO) { - if (musb->config->dyn_fifo) - status = ep_config_from_table(musb); - else { - ERR("reconfigure software for Dynamic FIFOs\n"); - status = -ENODEV; - } - } else { - if (!musb->config->dyn_fifo) - status = ep_config_from_hw(musb); - else { - ERR("reconfigure software for static FIFOs\n"); - return -ENODEV; - } - } + if (musb->dyn_fifo) + status = ep_config_from_table(musb); + else + status = ep_config_from_hw(musb); if (status < 0) return status; @@ -1587,11 +1570,6 @@ irqreturn_t musb_interrupt(struct musb *musb) ep_num++; } - /* finish handling "global" interrupts after handling fifos */ - if (musb->int_usb) - retval |= musb_stage2_irq(musb, - musb->int_usb, devctl, power); - return retval; } @@ -1696,7 +1674,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, unsigned long val; if (sscanf(buf, "%lu", &val) < 1) { - printk(KERN_ERR "Invalid VBUS timeout ms value\n"); + dev_err(dev, "Invalid VBUS timeout ms value\n"); return -EINVAL; } @@ -1746,7 +1724,7 @@ musb_srp_store(struct device *dev, struct device_attribute *attr, if (sscanf(buf, "%hu", &srp) != 1 || (srp != 1)) { - printk(KERN_ERR "SRP: Value must be 1\n"); + dev_err(dev, "SRP: Value must be 1\n"); return -EINVAL; } @@ -1759,6 +1737,19 @@ static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); #endif /* CONFIG_USB_GADGET_MUSB_HDRC */ +static struct attribute *musb_attributes[] = { + &dev_attr_mode.attr, + &dev_attr_vbus.attr, +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + &dev_attr_srp.attr, +#endif + NULL +}; + +static const struct attribute_group musb_attr_group = { + .attrs = musb_attributes, +}; + #endif /* sysfs */ /* Only used to provide driver mode change events */ @@ -1833,11 +1824,7 @@ static void musb_free(struct musb *musb) */ #ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif + sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif #ifdef CONFIG_USB_GADGET_MUSB_HDRC @@ -2017,22 +2004,10 @@ bad_config: musb->irq_wake = 0; } - pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n", - musb_driver_name, - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - /* host side needs more setup */ if (is_host_enabled(musb)) { struct usb_hcd *hcd = musb_to_hcd(musb); + u8 busctl; otg_set_host(musb->xceiv, &hcd->self); @@ -2040,6 +2015,13 @@ bad_config: hcd->self.otg_port = 1; musb->xceiv->host = &hcd->self; hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); + } } /* For the host-only role, we can activate right away. @@ -2079,26 +2061,26 @@ bad_config: } #ifdef CONFIG_SYSFS - status = device_create_file(dev, &dev_attr_mode); - status = device_create_file(dev, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - status = device_create_file(dev, &dev_attr_srp); -#endif /* CONFIG_USB_GADGET_MUSB_HDRC */ - status = 0; + status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); #endif if (status) goto fail2; + dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", + ({char *s; + switch (musb->board_mode) { + case MUSB_HOST: s = "Host"; break; + case MUSB_PERIPHERAL: s = "Peripheral"; break; + default: s = "OTG"; break; + }; s; }), + ctrl, + (is_dma_capable() && musb->dma_controller) + ? "DMA" : "PIO", + musb->nIrq); + return 0; fail2: -#ifdef CONFIG_SYSFS - device_remove_file(musb->controller, &dev_attr_mode); - device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - device_remove_file(musb->controller, &dev_attr_srp); -#endif -#endif musb_platform_exit(musb); fail: dev_err(musb->controller, @@ -2127,6 +2109,7 @@ static int __init musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq(pdev, 0); + int status; struct resource *iomem; void __iomem *base; @@ -2134,7 +2117,7 @@ static int __init musb_probe(struct platform_device *pdev) if (!iomem || irq == 0) return -ENODEV; - base = ioremap(iomem->start, iomem->end - iomem->start + 1); + base = ioremap(iomem->start, resource_size(iomem)); if (!base) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; @@ -2144,7 +2127,12 @@ static int __init musb_probe(struct platform_device *pdev) /* clobbered by use_dma=n */ orig_dma_mask = dev->dma_mask; #endif - return musb_init_controller(dev, irq, base); + + status = musb_init_controller(dev, irq, base); + if (status < 0) + iounmap(base); + + return status; } static int __exit musb_remove(struct platform_device *pdev) @@ -2173,6 +2161,148 @@ static int __exit musb_remove(struct platform_device *pdev) #ifdef CONFIG_PM +static struct musb_context_registers musb_context; + +void musb_save_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + + if (is_host_enabled(musb)) { + musb_context.frame = musb_readw(musb_base, MUSB_FRAME); + musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + } + musb_context.power = musb_readb(musb_base, MUSB_POWER); + musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); + musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); + musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); + musb_context.index = musb_readb(musb_base, MUSB_INDEX); + musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_context.index_regs[i].txmaxp = + musb_readw(musb_base, 0x10 + MUSB_TXMAXP); + musb_context.index_regs[i].txcsr = + musb_readw(musb_base, 0x10 + MUSB_TXCSR); + musb_context.index_regs[i].rxmaxp = + musb_readw(musb_base, 0x10 + MUSB_RXMAXP); + musb_context.index_regs[i].rxcsr = + musb_readw(musb_base, 0x10 + MUSB_RXCSR); + + if (musb->dyn_fifo) { + musb_context.index_regs[i].txfifoadd = + musb_read_txfifoadd(musb_base); + musb_context.index_regs[i].rxfifoadd = + musb_read_rxfifoadd(musb_base); + musb_context.index_regs[i].txfifosz = + musb_read_txfifosz(musb_base); + musb_context.index_regs[i].rxfifosz = + musb_read_rxfifosz(musb_base); + } + if (is_host_enabled(musb)) { + musb_context.index_regs[i].txtype = + musb_readb(musb_base, 0x10 + MUSB_TXTYPE); + musb_context.index_regs[i].txinterval = + musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL); + musb_context.index_regs[i].rxtype = + musb_readb(musb_base, 0x10 + MUSB_RXTYPE); + musb_context.index_regs[i].rxinterval = + musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL); + + musb_context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb_context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb_context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb_context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb_context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb_context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); + + musb_platform_save_context(musb, &musb_context); +} + +void musb_restore_context(struct musb *musb) +{ + int i; + void __iomem *musb_base = musb->mregs; + void __iomem *ep_target_regs; + + musb_platform_restore_context(musb, &musb_context); + + if (is_host_enabled(musb)) { + musb_writew(musb_base, MUSB_FRAME, musb_context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode); + } + musb_writeb(musb_base, MUSB_POWER, musb_context.power); + musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe); + musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe); + musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe); + musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl); + + for (i = 0; i < MUSB_C_NUM_EPS; ++i) { + musb_writeb(musb_base, MUSB_INDEX, i); + musb_writew(musb_base, 0x10 + MUSB_TXMAXP, + musb_context.index_regs[i].txmaxp); + musb_writew(musb_base, 0x10 + MUSB_TXCSR, + musb_context.index_regs[i].txcsr); + musb_writew(musb_base, 0x10 + MUSB_RXMAXP, + musb_context.index_regs[i].rxmaxp); + musb_writew(musb_base, 0x10 + MUSB_RXCSR, + musb_context.index_regs[i].rxcsr); + + if (musb->dyn_fifo) { + musb_write_txfifosz(musb_base, + musb_context.index_regs[i].txfifosz); + musb_write_rxfifosz(musb_base, + musb_context.index_regs[i].rxfifosz); + musb_write_txfifoadd(musb_base, + musb_context.index_regs[i].txfifoadd); + musb_write_rxfifoadd(musb_base, + musb_context.index_regs[i].rxfifoadd); + } + + if (is_host_enabled(musb)) { + musb_writeb(musb_base, 0x10 + MUSB_TXTYPE, + musb_context.index_regs[i].txtype); + musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL, + musb_context.index_regs[i].txinterval); + musb_writeb(musb_base, 0x10 + MUSB_RXTYPE, + musb_context.index_regs[i].rxtype); + musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL, + + musb_context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, + musb_context.index_regs[i].txfunaddr); + musb_write_txhubaddr(musb_base, i, + musb_context.index_regs[i].txhubaddr); + musb_write_txhubport(musb_base, i, + musb_context.index_regs[i].txhubport); + + ep_target_regs = + musb_read_target_reg_base(i, musb_base); + + musb_write_rxfunaddr(ep_target_regs, + musb_context.index_regs[i].rxfunaddr); + musb_write_rxhubaddr(ep_target_regs, + musb_context.index_regs[i].rxhubaddr); + musb_write_rxhubport(ep_target_regs, + musb_context.index_regs[i].rxhubport); + } + } + + musb_writeb(musb_base, MUSB_INDEX, musb_context.index); +} + static int musb_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -2194,6 +2324,8 @@ static int musb_suspend(struct device *dev) */ } + musb_save_context(musb); + if (musb->set_clock) musb->set_clock(musb->clock, 0); else @@ -2215,6 +2347,8 @@ static int musb_resume_noirq(struct device *dev) else clk_enable(musb->clock); + musb_restore_context(musb); + /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 03d50909b078..d849fb81c131 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -52,6 +52,15 @@ struct musb; struct musb_hw_ep; struct musb_ep; +/* Helper defines for struct musb->hwvers */ +#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) +#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) +#define MUSB_HWVERS_RC 0x8000 +#define MUSB_HWVERS_1300 0x52C +#define MUSB_HWVERS_1400 0x590 +#define MUSB_HWVERS_1800 0x720 +#define MUSB_HWVERS_1900 0x784 +#define MUSB_HWVERS_2000 0x800 #include "musb_debug.h" #include "musb_dma.h" @@ -322,13 +331,6 @@ struct musb { struct clk *clock; irqreturn_t (*isr)(int, void *); struct work_struct irq_work; -#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) -#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) -#define MUSB_HWVERS_RC 0x8000 -#define MUSB_HWVERS_1300 0x52C -#define MUSB_HWVERS_1400 0x590 -#define MUSB_HWVERS_1800 0x720 -#define MUSB_HWVERS_2000 0x800 u16 hwvers; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ @@ -411,22 +413,15 @@ struct musb { unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ + unsigned dyn_fifo:1; /* dynamic FIFO supported? */ -#ifdef C_MP_TX - unsigned bulk_split:1; + unsigned bulk_split:1; #define can_bulk_split(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#else -#define can_bulk_split(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#ifdef C_MP_RX - unsigned bulk_combine:1; + unsigned bulk_combine:1; #define can_bulk_combine(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) -#else -#define can_bulk_combine(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) #ifdef CONFIG_USB_GADGET_MUSB_HDRC /* is_suspended means USB B_PERIPHERAL suspend */ @@ -461,6 +456,45 @@ struct musb { #endif }; +#ifdef CONFIG_PM +struct musb_csr_regs { + /* FIFO registers */ + u16 txmaxp, txcsr, rxmaxp, rxcsr; + u16 rxfifoadd, txfifoadd; + u8 txtype, txinterval, rxtype, rxinterval; + u8 rxfifosz, txfifosz; + u8 txfunaddr, txhubaddr, txhubport; + u8 rxfunaddr, rxhubaddr, rxhubport; +}; + +struct musb_context_registers { + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) + u32 otg_sysconfig, otg_forcestandby; +#endif + u8 power; + u16 intrtxe, intrrxe; + u8 intrusbe; + u16 frame; + u8 index, testmode; + + u8 devctl, misc; + + struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; +}; + +#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) +extern void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context); +extern void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context); +#else +#define musb_platform_save_context(m, x) do {} while (0) +#define musb_platform_restore_context(m, x) do {} while (0) +#endif + +#endif + static inline void musb_set_vbus(struct musb *musb, int is_on) { musb->board_set_vbus(musb, is_on); @@ -562,7 +596,7 @@ extern void musb_hnp_stop(struct musb *musb); extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); #else #define musb_platform_try_idle(x, y) do {} while (0) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index cbcf14a236e6..a9f288cd70ed 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -895,7 +895,14 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_split(), use by updating "tmp"; * likewise high bandwidth periodic tx */ - musb_writew(regs, MUSB_TXMAXP, tmp); + /* Set TXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. Currently, It seems that double + * buffering has problem if musb RTL revision number < 2.0. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, tmp); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -925,7 +932,13 @@ static int musb_gadget_enable(struct usb_ep *ep, /* REVISIT if can_bulk_combine() use by updating "tmp" * likewise high bandwidth periodic rx */ - musb_writew(regs, MUSB_RXMAXP, tmp); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffering mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx); + else + musb_writew(regs, MUSB_RXMAXP, tmp); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { @@ -1697,8 +1710,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) return -EINVAL; /* driver must be initialized to support peripheral mode */ - if (!musb || !(musb->board_mode == MUSB_OTG - || musb->board_mode != MUSB_OTG)) { + if (!musb) { DBG(1, "%s, no dev??\n", __func__); return -ENODEV; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 74c4c3698f1e..3421cf9858b5 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -605,8 +605,14 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg); musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg); /* NOTE: bulk combining rewrites high bits of maxpacket */ - musb_writew(ep->regs, MUSB_RXMAXP, - qh->maxpacket | ((qh->hb_mult - 1) << 11)); + /* Set RXMAXP with the FIFO size of the endpoint + * to disable double buffer mode. + */ + if (musb->hwvers < MUSB_HWVERS_2000) + musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); + else + musb_writew(ep->regs, MUSB_RXMAXP, + qh->maxpacket | ((qh->hb_mult - 1) << 11)); ep->rx_reinit = 0; } @@ -1771,6 +1777,9 @@ static int musb_schedule( int best_end, epnum; struct musb_hw_ep *hw_ep = NULL; struct list_head *head = NULL; + u8 toggle; + u8 txtype; + struct urb *urb = next_urb(qh); /* use fixed hardware for control and bulk */ if (qh->type == USB_ENDPOINT_XFER_CONTROL) { @@ -1809,6 +1818,27 @@ static int musb_schedule( diff -= (qh->maxpacket * qh->hb_mult); if (diff >= 0 && best_diff > diff) { + + /* + * Mentor controller has a bug in that if we schedule + * a BULK Tx transfer on an endpoint that had earlier + * handled ISOC then the BULK transfer has to start on + * a zero toggle. If the BULK transfer starts on a 1 + * toggle then this transfer will fail as the mentor + * controller starts the Bulk transfer on a 0 toggle + * irrespective of the programming of the toggle bits + * in the TXCSR register. Check for this condition + * while allocating the EP for a Tx Bulk transfer. If + * so skip this EP. + */ + hw_ep = musb->endpoints + epnum; + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in); + txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE) + >> 4) & 0x3; + if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) && + toggle && (txtype == USB_ENDPOINT_XFER_ISOC)) + continue; + best_diff = diff; best_end = epnum; } diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 473a94ef905f..292894a2c247 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -72,6 +72,10 @@ #define MUSB_DEVCTL_HR 0x02 #define MUSB_DEVCTL_SESSION 0x01 +/* MUSB ULPI VBUSCONTROL */ +#define MUSB_ULPI_USE_EXTVBUS 0x01 +#define MUSB_ULPI_USE_EXTVBUSIND 0x02 + /* TESTMODE */ #define MUSB_TEST_FORCE_HOST 0x80 #define MUSB_TEST_FIFO_ACCESS 0x40 @@ -246,6 +250,7 @@ /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */ #define MUSB_HWVERS 0x6C /* 8 bit */ +#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */ #define MUSB_EPINFO 0x78 /* 8 bit */ #define MUSB_RAMINFO 0x79 /* 8 bit */ @@ -321,6 +326,26 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) musb_writew(mbase, MUSB_RXFIFOADD, c_off); } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_TXFIFOSZ); +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_TXFIFOADD); +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ + return musb_readb(mbase, MUSB_RXFIFOSZ); +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ + return musb_readw(mbase, MUSB_RXFIFOADD); +} + static inline u8 musb_read_configdata(void __iomem *mbase) { musb_writeb(mbase, MUSB_INDEX, 0); @@ -376,6 +401,36 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, qh_h_port_reg); } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR)); +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR)); +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT)); +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR)); +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR)); +} + +static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ + return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT)); +} + #else /* CONFIG_BLACKFIN */ #define USB_BASE USB_FADDR @@ -455,6 +510,22 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) { } +static inline u8 musb_read_txfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_txfifoadd(void __iomem *mbase) +{ +} + +static inline u8 musb_read_rxfifosz(void __iomem *mbase) +{ +} + +static inline u16 musb_read_rxfifoadd(void __iomem *mbase) +{ +} + static inline u8 musb_read_configdata(void __iomem *mbase) { return 0; @@ -462,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase) static inline u16 musb_read_hwvers(void __iomem *mbase) { - return 0; + /* + * This register is invisible on Blackfin, actually the MUSB + * RTL version of Blackfin is 1.9, so just harcode its value. + */ + return MUSB_HWVERS_1900; } static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) @@ -500,6 +575,30 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, { } +static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +{ +} + +static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) +{ +} + #endif /* CONFIG_BLACKFIN */ #endif /* __MUSB_REGS_H__ */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index a237550f91bf..2fa7d5c00f31 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -250,20 +250,39 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) u8 bchannel; u8 int_hsdma; - u32 addr; + u32 addr, count; u16 csr; spin_lock_irqsave(&musb->lock, flags); int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); - if (!int_hsdma) - goto done; #ifdef CONFIG_BLACKFIN /* Clear DMA interrupt flags */ musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); #endif + if (!int_hsdma) { + DBG(2, "spurious DMA irq\n"); + + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { + musb_channel = (struct musb_dma_channel *) + &(controller->channel[bchannel]); + channel = &musb_channel->channel; + if (channel->status == MUSB_DMA_STATUS_BUSY) { + count = musb_read_hsdma_count(mbase, bchannel); + + if (count == 0) + int_hsdma |= (1 << bchannel); + } + } + + DBG(2, "int_hsdma = 0x%x\n", int_hsdma); + + if (!int_hsdma) + goto done; + } + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { if (int_hsdma & (1 << bchannel)) { musb_channel = (struct musb_dma_channel *) diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index 1299d92dc83f..613f95a058f7 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -55,6 +55,10 @@ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ addr) +#define musb_read_hsdma_count(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) + #define musb_write_hsdma_count(mbase, bchannel, len) \ musb_writel(mbase, \ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ @@ -96,6 +100,19 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); } +static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) +{ + u32 count = musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; +} + static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 83beeac5e7bf..3fe16867b5a8 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -220,7 +220,7 @@ int __init musb_platform_init(struct musb *musb) musb_platform_resume(musb); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ l &= ~NOSTDBY; /* remove possible nostdby */ l |= SMARTSTDBY; /* enable smart standby */ @@ -233,17 +233,19 @@ int __init musb_platform_init(struct musb *musb) */ if (!cpu_is_omap3430()) l |= AUTOIDLE; /* enable auto idle */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_INTERFSEL); + l = musb_readl(musb->mregs, OTG_INTERFSEL); l |= ULPI_12PIN; - omap_writel(l, OTG_INTERFSEL); + musb_writel(musb->mregs, OTG_INTERFSEL, l); pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", - omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG), - omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL), - omap_readl(OTG_SIMENABLE)); + musb_readl(musb->mregs, OTG_REVISION), + musb_readl(musb->mregs, OTG_SYSCONFIG), + musb_readl(musb->mregs, OTG_SYSSTATUS), + musb_readl(musb->mregs, OTG_INTERFSEL), + musb_readl(musb->mregs, OTG_SIMENABLE)); omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1); @@ -255,6 +257,22 @@ int __init musb_platform_init(struct musb *musb) return 0; } +#ifdef CONFIG_PM +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG); + musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY); +} + +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig); + musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby); +} +#endif + int musb_platform_suspend(struct musb *musb) { u32 l; @@ -263,13 +281,13 @@ int musb_platform_suspend(struct musb *musb) return 0; /* in any role */ - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l |= ENABLEFORCE; /* enable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l |= ENABLEWAKEUP; /* enable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); otg_set_suspend(musb->xceiv, 1); @@ -295,13 +313,13 @@ static int musb_platform_resume(struct musb *musb) else clk_enable(musb->clock); - l = omap_readl(OTG_SYSCONFIG); + l = musb_readl(musb->mregs, OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ - omap_writel(l, OTG_SYSCONFIG); + musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = omap_readl(OTG_FORCESTDBY); + l = musb_readl(musb->mregs, OTG_FORCESTDBY); l &= ~ENABLEFORCE; /* disable MSTANDBY */ - omap_writel(l, OTG_FORCESTDBY); + musb_writel(musb->mregs, OTG_FORCESTDBY, l); return 0; } diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index fbede7798aed..40b3c02ae9f0 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -10,47 +10,43 @@ #ifndef __MUSB_OMAP243X_H__ #define __MUSB_OMAP243X_H__ -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include <mach/hardware.h> #include <plat/usb.h> /* * OMAP2430-specific definitions */ -#define MENTOR_BASE_OFFSET 0 -#if defined(CONFIG_ARCH_OMAP2430) -#define OMAP_HSOTG_BASE (OMAP243X_HS_BASE) -#elif defined(CONFIG_ARCH_OMAP3430) -#define OMAP_HSOTG_BASE (OMAP34XX_HSUSB_OTG_BASE) -#endif -#define OMAP_HSOTG(offset) (OMAP_HSOTG_BASE + 0x400 + (offset)) -#define OTG_REVISION OMAP_HSOTG(0x0) -#define OTG_SYSCONFIG OMAP_HSOTG(0x4) +#define OTG_REVISION 0x400 + +#define OTG_SYSCONFIG 0x404 # define MIDLEMODE 12 /* bit position */ # define FORCESTDBY (0 << MIDLEMODE) # define NOSTDBY (1 << MIDLEMODE) # define SMARTSTDBY (2 << MIDLEMODE) + # define SIDLEMODE 3 /* bit position */ # define FORCEIDLE (0 << SIDLEMODE) # define NOIDLE (1 << SIDLEMODE) # define SMARTIDLE (2 << SIDLEMODE) + # define ENABLEWAKEUP (1 << 2) # define SOFTRST (1 << 1) # define AUTOIDLE (1 << 0) -#define OTG_SYSSTATUS OMAP_HSOTG(0x8) + +#define OTG_SYSSTATUS 0x408 # define RESETDONE (1 << 0) -#define OTG_INTERFSEL OMAP_HSOTG(0xc) + +#define OTG_INTERFSEL 0x40c # define EXTCP (1 << 2) -# define PHYSEL 0 /* bit position */ +# define PHYSEL 0 /* bit position */ # define UTMI_8BIT (0 << PHYSEL) # define ULPI_12PIN (1 << PHYSEL) # define ULPI_8PIN (2 << PHYSEL) -#define OTG_SIMENABLE OMAP_HSOTG(0x10) + +#define OTG_SIMENABLE 0x410 # define TM1 (1 << 0) -#define OTG_FORCESTDBY OMAP_HSOTG(0x14) -# define ENABLEFORCE (1 << 0) -#endif /* CONFIG_ARCH_OMAP2430 */ +#define OTG_FORCESTDBY 0x414 +# define ENABLEFORCE (1 << 0) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 88b587c703e9..ab776a8d98ca 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1118,7 +1118,7 @@ int __init musb_platform_init(struct musb *musb) } musb->sync = mem->start; - sync = ioremap(mem->start, mem->end - mem->start + 1); + sync = ioremap(mem->start, resource_size(mem)); if (!sync) { pr_debug("ioremap for sync failed\n"); ret = -ENOMEM; diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index e13c77052e5e..1c868096bd6f 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -648,7 +648,7 @@ void dma_controller_destroy(struct dma_controller *c) } } - if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0) + if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0) omap_free_dma(tusb_dma->ch); kfree(tusb_dma); |
