summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/uhci-hcd.c11
-rw-r--r--drivers/usb/host/uhci-hcd.h4
-rw-r--r--drivers/usb/host/uhci-hub.c6
3 files changed, 17 insertions, 4 deletions
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 83344d688ff0..214851a6244f 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -546,6 +546,17 @@ static int uhci_init(struct usb_hcd *hcd)
}
uhci->rh_numports = port;
+ /* Intel controllers report the OverCurrent bit active on.
+ * VIA controllers report it active off, so we'll adjust the
+ * bit value. (It's not standardized in the UHCI spec.)
+ */
+ if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+ uhci->oc_low = 1;
+
+ /* HP's server management chip requires a longer port reset delay. */
+ if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
+ uhci->wait_for_hp = 1;
+
/* Kick BIOS off this hardware and reset if the controller
* isn't already safely quiescent.
*/
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 49bf2790f9c2..f86db61cf085 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -415,6 +415,10 @@ struct uhci_hcd {
struct timer_list fsbr_timer; /* For turning off FBSR */
+ /* Silicon quirks */
+ unsigned int oc_low:1; /* OverCurrent bit active low */
+ unsigned int wait_for_hp:1; /* Wait for HP port reset */
+
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
unsigned long resuming_ports;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 6d59c0f77f25..75418265488d 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -149,8 +149,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
/* HP's server management chip requires
* a longer delay. */
- if (to_pci_dev(uhci_dev(uhci))->vendor ==
- PCI_VENDOR_ID_HP)
+ if (uhci->wait_for_hp)
wait_for_HP(port_addr);
/* If the port was enabled before, turning
@@ -266,8 +265,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* VIA controllers report it active off, so we'll adjust the
* bit value. (It's not standardized in the UHCI spec.)
*/
- if (to_pci_dev(hcd->self.controller)->vendor ==
- PCI_VENDOR_ID_VIA)
+ if (uhci->oc_low)
status ^= USBPORTSC_OC;
/* UHCI doesn't support C_RESET (always false) */
OpenPOWER on IntegriCloud