summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-atmel.c24
-rw-r--r--drivers/usb/host/ohci-at91.c106
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/ohci-sa1111.c297
-rw-r--r--drivers/usb/host/pci-quirks.c3
5 files changed, 271 insertions, 161 deletions
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index a5a3ef1f0096..19f318ababa2 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
/* interface and function clocks */
static struct clk *iclk, *fclk;
@@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
+static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
+
static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
goto fail_create_hcd;
}
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &at91_ehci_dma_mask;
+
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
@@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ehci_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g45-ehci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
+#endif
+
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
.remove = __devexit_p(ehci_atmel_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- .driver.name = "atmel-ehci",
+ .driver = {
+ .name = "atmel-ehci",
+ .of_match_table = of_match_ptr(atmel_ehci_dt_ids),
+ },
};
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 77afabc77f9b..db8963f5fbce 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -14,6 +14,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
@@ -448,10 +450,11 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
/* From the GPIO notifying the over-current situation, find
* out the corresponding port */
- gpio = irq_to_gpio(irq);
for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
- if (pdata->overcurrent_pin[port] == gpio)
+ if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
+ gpio = pdata->overcurrent_pin[port];
break;
+ }
}
if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
@@ -476,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static const struct of_device_id at91_ohci_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-ohci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int i, ret, gpio;
+ enum of_gpio_flags flags;
+ struct at91_usbh_data *pdata;
+ u32 ports;
+
+ if (!np)
+ return 0;
+
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &at91_ohci_dma_mask;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (!of_property_read_u32(np, "num-ports", &ports))
+ pdata->ports = ports;
+
+ for (i = 0; i < 2; i++) {
+ gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
+ pdata->vbus_pin[i] = gpio;
+ if (!gpio_is_valid(gpio))
+ continue;
+ pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
+ ret = gpio_request(gpio, "ohci_vbus");
+ if (ret) {
+ dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio);
+ continue;
+ }
+ ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1);
+ if (ret)
+ dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d",
+ !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio);
+ }
+
+ for (i = 0; i < 2; i++) {
+ gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
+ pdata->overcurrent_pin[i] = gpio;
+ if (!gpio_is_valid(gpio))
+ continue;
+ ret = gpio_request(gpio, "ohci_overcurrent");
+ if (ret) {
+ dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio);
+ continue;
+ }
+
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio);
+ continue;
+ }
+
+ ret = request_irq(gpio_to_irq(gpio),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(gpio);
+ dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ }
+ }
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
/*-------------------------------------------------------------------------*/
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
- struct at91_usbh_data *pdata = pdev->dev.platform_data;
+ struct at91_usbh_data *pdata;
int i;
+ i = ohci_at91_of_init(pdev);
+
+ if (i)
+ return i;
+
+ pdata = pdev->dev.platform_data;
+
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (!gpio_is_valid(pdata->vbus_pin[i]))
@@ -595,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = {
.driver = {
.name = "at91_ohci",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 788ff07aa7c1..235171f29460 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -999,7 +999,7 @@ MODULE_LICENSE ("GPL");
#define SA1111_DRIVER ohci_hcd_sa1111_driver
#endif
-#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
#include "ohci-s3c2410.c"
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9821ba..e1004fb37bd9 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
-#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
#error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined."
#endif
-extern int usb_disabled(void);
+#define USB_STATUS 0x0118
+#define USB_RESET 0x011c
+#define USB_IRQTEST 0x0120
+
+#define USB_RESET_FORCEIFRESET (1 << 0)
+#define USB_RESET_FORCEHCRESET (1 << 1)
+#define USB_RESET_CLKGENRESET (1 << 2)
+#define USB_RESET_SIMSCALEDOWN (1 << 3)
+#define USB_RESET_USBINTTEST (1 << 4)
+#define USB_RESET_SLEEPSTBYEN (1 << 5)
+#define USB_RESET_PWRSENSELOW (1 << 6)
+#define USB_RESET_PWRCTRLLOW (1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP (1 << 7)
+#define USB_STATUS_IRQHCIBUFFACC (1 << 8)
+#define USB_STATUS_NIRQHCIM (1 << 9)
+#define USB_STATUS_NHCIMFCLR (1 << 10)
+#define USB_STATUS_USBPWRSENSE (1 << 11)
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+ unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+ dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+ ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+ ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+ ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+ ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+ ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
{
- unsigned int usb_rst = 0;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ ohci_hcd_init(ohci);
+ return ohci_init(ohci);
+}
- printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
- __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
-#ifdef CONFIG_SA1100_BADGE4
- if (machine_is_badge4()) {
- badge4_set_5V(BADGE4_5V_USB, 1);
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
}
+ return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "SA-1111 OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_sa1111_reset,
+ .start = ohci_sa1111_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+ unsigned int usb_rst = 0;
+ int ret;
+
+ dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
if (machine_is_xp860() ||
machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
* host controller in reset.
*/
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
- dev->mapbase + SA1111_USB_RESET);
+ dev->mapbase + USB_RESET);
/*
* Now, carefully enable the USB clock, and take
* the USB host controller out of reset.
*/
- sa1111_enable_device(dev);
- udelay(11);
- sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+ ret = sa1111_enable_device(dev);
+ if (ret == 0) {
+ udelay(11);
+ sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+ }
+
+ return ret;
}
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
- __FILE__);
+
+ dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
/*
* Put the USB host controller into reset.
*/
- usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+ usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
- dev->mapbase + SA1111_USB_RESET);
+ dev->mapbase + USB_RESET);
/*
* Stop the USB clock.
*/
sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
- if (machine_is_badge4()) {
- /* Disable power to the USB bus */
- badge4_set_5V(BADGE4_5V_USB, 0);
- }
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
- unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
- dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
- ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
- ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
- ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
- ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
- ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
/**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
*
* Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
*/
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
- struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
{
struct usb_hcd *hcd;
- int retval;
+ int ret;
- hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+ if (usb_disabled())
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
if (!hcd)
return -ENOMEM;
+
hcd->rsrc_start = dev->res.start;
hcd->rsrc_len = resource_size(&dev->res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dbg("request_mem_region failed");
- retval = -EBUSY;
+ ret = -EBUSY;
goto err1;
}
+
hcd->regs = dev->mapbase;
- sa1111_start_hc(dev);
- ohci_hcd_init(hcd_to_ohci(hcd));
+ ret = sa1111_start_hc(dev);
+ if (ret)
+ goto err2;
- retval = usb_add_hcd(hcd, dev->irq[1], 0);
- if (retval == 0)
- return retval;
+ ret = usb_add_hcd(hcd, dev->irq[1], 0);
+ if (ret == 0)
+ return ret;
sa1111_stop_hc(dev);
+ err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
- return retval;
+ return ret;
}
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
/**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
* @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
*
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
*/
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
{
+ struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
usb_remove_hcd(hcd);
sa1111_stop_hc(dev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run (ohci)) < 0) {
- err ("can't start %s", hcd->self.bus_name);
- ohci_stop (hcd);
- return ret;
- }
return 0;
}
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
- .description = hcd_name,
- .product_desc = "SA-1111 OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_sa1111_start,
- .stop = ohci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
- return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
{
struct usb_hcd *hcd = sa1111_get_drvdata(dev);
- usb_hcd_sa1111_remove(hcd, dev);
- return 0;
+ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ hcd->driver->shutdown(hcd);
+ sa1111_stop_hc(dev);
+ }
}
static struct sa1111_driver ohci_hcd_sa1111_driver = {
.drv = {
.name = "sa1111-ohci",
+ .owner = THIS_MODULE,
},
.devid = SA1111_DEVID_USB,
- .probe = ohci_hcd_sa1111_drv_probe,
- .remove = ohci_hcd_sa1111_drv_remove,
+ .probe = ohci_hcd_sa1111_probe,
+ .remove = ohci_hcd_sa1111_remove,
+ .shutdown = ohci_hcd_sa1111_shutdown,
};
-
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 7732d69e49e0..11de5f1be981 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -893,4 +893,5 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
quirk_usb_handoff_xhci(pdev);
pci_disable_device(pdev);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
OpenPOWER on IntegriCloud