summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Kconfig10
-rw-r--r--drivers/usb/host/Makefile4
-rw-r--r--drivers/usb/host/ehci-hcd.c9
-rw-r--r--drivers/usb/host/ehci-hub.c4
-rw-r--r--drivers/usb/host/ehci-pci.c20
-rw-r--r--drivers/usb/host/ehci-q.c14
-rw-r--r--drivers/usb/host/hc_crisv10.c2
-rw-r--r--drivers/usb/host/isp116x-hcd.c422
-rw-r--r--drivers/usb/host/isp116x.h83
-rw-r--r--drivers/usb/host/ohci-au1xxx.c1
-rw-r--r--drivers/usb/host/ohci-hcd.c14
-rw-r--r--drivers/usb/host/ohci-hub.c2
-rw-r--r--drivers/usb/host/ohci-lh7a404.c1
-rw-r--r--drivers/usb/host/ohci-omap.c2
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c1
-rw-r--r--drivers/usb/host/ohci-pxa27x.c121
-rw-r--r--drivers/usb/host/ohci-s3c2410.c4
-rw-r--r--drivers/usb/host/pci-quirks.c6
-rw-r--r--drivers/usb/host/sl811-hcd.c14
-rw-r--r--drivers/usb/host/sl811_cs.c115
-rw-r--r--drivers/usb/host/uhci-debug.c14
-rw-r--r--drivers/usb/host/uhci-hcd.c34
-rw-r--r--drivers/usb/host/uhci-hcd.h32
-rw-r--r--drivers/usb/host/uhci-q.c30
24 files changed, 430 insertions, 529 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ed1899d307db..be3fd9bce573 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -11,14 +11,14 @@ config USB_EHCI_HCD
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
- configure this Host Controller Driver. At this writing, the primary
- implementation of EHCI is a chip from NEC, widely available in add-on
- PCI cards, but implementations are in the works from other vendors
- including Intel and Philips. Motherboard support is appearing.
+ configure this Host Controller Driver. At the time of this writing,
+ the primary implementation of EHCI is a chip from NEC, widely available
+ in add-on PCI cards, but implementations are in the works from other
+ vendors including Intel and Philips. Motherboard support is appearing.
EHCI controllers are packaged with "companion" host controllers (OHCI
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
- will connect to EHCI if it the device is high speed, otherwise they
+ will connect to EHCI if the device is high speed, otherwise they
connect to a companion controller. If you configure EHCI, you should
probably configure the OHCI (for NEC and some other vendors) USB Host
Controller Driver or UHCI (for Via motherboards) Host Controller
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 58321d3f314c..e3020f4b17be 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -2,6 +2,10 @@
# Makefile for USB Host Controller Drivers
#
+ifeq ($(CONFIG_USB_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
+endif
+
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 29f52a44b928..9dd3d14c64f3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -17,13 +17,6 @@
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dmapool.h>
@@ -624,7 +617,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
}
/* remote wakeup [4.3.1] */
- if ((status & STS_PCD) && hcd->remote_wakeup) {
+ if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
/* resume root hub? */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 82caf336e9b6..69b0b9be7a64 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -59,7 +59,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
t2 |= PORT_SUSPEND;
- if (hcd->remote_wakeup)
+ if (device_may_wakeup(&hcd->self.root_hub->dev))
t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
else
t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
@@ -517,7 +517,7 @@ static int ehci_hub_control (
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
- if (hcd->remote_wakeup)
+ if (device_may_wakeup(&hcd->self.root_hub->dev))
temp |= PORT_WAKE_BITS;
writel (temp | PORT_SUSPEND,
&ehci->regs->port_status [wIndex]);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 13f73a836e45..08ca0f849dab 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -210,7 +210,16 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* Serial Bus Release Number is at PCI 0x60 offset */
pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
- /* REVISIT: per-port wake capability (PCI 0x62) currently unused */
+ /* Workaround current PCI init glitch: wakeup bits aren't
+ * being set from PCI PM capability.
+ */
+ if (!device_can_wakeup(&pdev->dev)) {
+ u16 port_wake;
+
+ pci_read_config_word(pdev, 0x62, &port_wake);
+ if (port_wake & 0x0001)
+ device_init_wakeup(&pdev->dev, 1);
+ }
retval = ehci_pci_reinit(ehci, pdev);
done:
@@ -269,7 +278,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned port;
- struct usb_device *root = hcd->self.root_hub;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = -EINVAL;
@@ -303,13 +311,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
restart:
ehci_dbg(ehci, "lost power, restarting\n");
- for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
- port--;
- if (!root->children [port])
- continue;
- usb_set_device_state(root->children[port],
- USB_STATE_NOTATTACHED);
- }
+ usb_root_hub_lost_power(hcd->self.root_hub);
/* Else reset, to cope with power loss or flush-to-storage
* style "resume" having let BIOS kick in during reboot.
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index bf03ec0d8ee2..9b13bf2fa98d 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -514,18 +514,18 @@ qh_urb_transaction (
qtd->urb = urb;
qtd_prev->hw_next = QTD_NEXT (qtd->qtd_dma);
list_add_tail (&qtd->qtd_list, head);
+
+ /* for zero length DATA stages, STATUS is always IN */
+ if (len == 0)
+ token |= (1 /* "in" */ << 8);
}
/*
* data transfer stage: buffer setup
*/
- if (likely (len > 0))
- buf = urb->transfer_dma;
- else
- buf = 0;
+ buf = urb->transfer_dma;
- /* for zero length DATA stages, STATUS is always IN */
- if (!buf || is_input)
+ if (is_input)
token |= (1 /* "in" */ << 8);
/* else it's already initted to "out" pid (0 << 8) */
@@ -572,7 +572,7 @@ qh_urb_transaction (
* control requests may need a terminating data "status" ack;
* bulk ones may need a terminating short packet (zero length).
*/
- if (likely (buf != 0)) {
+ if (likely (urb->transfer_buffer_length != 0)) {
int one_more = 0;
if (usb_pipecontrol (urb->pipe)) {
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
index 0eaabeb37ac3..641268d7e6f3 100644
--- a/drivers/usb/host/hc_crisv10.c
+++ b/drivers/usb/host/hc_crisv10.c
@@ -4397,7 +4397,7 @@ static int __init etrax_usb_hc_init(void)
device_initialize(&fake_device);
kobject_set_name(&fake_device.kobj, "etrax_usb");
kobject_add(&fake_device.kobj);
- kobject_hotplug(&fake_device.kobj, KOBJ_ADD);
+ kobject_uevent(&fake_device.kobj, KOBJ_ADD);
hc->bus->controller = &fake_device;
usb_register_bus(hc->bus);
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 82f64986bc22..584b8dc65119 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -55,19 +55,13 @@
/* enqueuing/finishing log of urbs */
//#define URB_TRACE
-#include <linux/config.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/usb_isp116x.h>
#include <linux/platform_device.h>
@@ -77,14 +71,10 @@
#include <asm/system.h>
#include <asm/byteorder.h>
-#ifndef DEBUG
-# define STUB_DEBUG_FILE
-#endif
-
#include "../core/hcd.h"
#include "isp116x.h"
-#define DRIVER_VERSION "05 Aug 2005"
+#define DRIVER_VERSION "03 Nov 2005"
#define DRIVER_DESC "ISP116x USB Host Controller Driver"
MODULE_DESCRIPTION(DRIVER_DESC);
@@ -164,13 +154,11 @@ static void pack_fifo(struct isp116x *isp116x)
struct ptd *ptd;
int buflen = isp116x->atl_last_dir == PTD_DIR_IN
? isp116x->atl_bufshrt : isp116x->atl_buflen;
- int ptd_count = 0;
isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
for (ep = isp116x->atl_active; ep; ep = ep->active) {
- ++ptd_count;
ptd = &ep->ptd;
dump_ptd(ptd);
dump_ptd_out_data(ptd, ep->data);
@@ -305,9 +293,8 @@ static void postproc_atl_queue(struct isp116x *isp116x)
udev = urb->dev;
ptd = &ep->ptd;
cc = PTD_GET_CC(ptd);
-
- spin_lock(&urb->lock);
short_not_ok = 1;
+ spin_lock(&urb->lock);
/* Data underrun is special. For allowed underrun
we clear the error and continue as normal. For
@@ -420,7 +407,7 @@ static void postproc_atl_queue(struct isp116x *isp116x)
ep->nextpid = 0;
break;
default:
- BUG_ON(1);
+ BUG();
}
spin_unlock(&urb->lock);
}
@@ -628,8 +615,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
if (intstat & HCINT_UE) {
- ERR("Unrecoverable error\n");
- /* What should we do here? Reset? */
+ ERR("Unrecoverable error, HC is dead!\n");
+ /* IRQ's are off, we do no DMA,
+ perfectly ready to die ... */
+ hcd->state = HC_STATE_HALT;
+ ret = IRQ_HANDLED;
+ goto done;
}
if (intstat & HCINT_RHSC)
/* When root hub or any of its ports is going
@@ -640,7 +631,6 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
usb_hcd_resume_root_hub(hcd);
- ret = IRQ_HANDLED;
}
irqstat &= ~HCuPINT_OPR;
ret = IRQ_HANDLED;
@@ -651,6 +641,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
}
isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb);
+ done:
spin_unlock(&isp116x->lock);
return ret;
}
@@ -724,6 +715,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
spin_lock_irqsave(&isp116x->lock, flags);
if (!HC_IS_RUNNING(hcd->state)) {
+ kfree(ep);
ret = -ENODEV;
goto fail;
}
@@ -888,7 +880,7 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd,
struct usb_host_endpoint *hep)
{
int i;
- struct isp116x_ep *ep = hep->hcpriv;;
+ struct isp116x_ep *ep = hep->hcpriv;
if (!ep)
return;
@@ -916,8 +908,6 @@ static int isp116x_get_frame(struct usb_hcd *hcd)
return (int)fmnum;
}
-/*----------------------------------------------------------------*/
-
/*
Adapted from ohci-hub.c. Currently we don't support autosuspend.
*/
@@ -968,11 +958,10 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x,
desc->bHubContrCurrent = 0;
desc->bNbrPorts = (u8) (reg & 0x3);
/* Power switching, device type, overcurrent. */
- desc->wHubCharacteristics =
- (__force __u16) cpu_to_le16((u16) ((reg >> 8) & 0x1f));
+ desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f));
desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff);
/* two bitmaps: ports removable, and legacy PortPwrCtrlMask */
- desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
+ desc->bitmap[0] = 0;
desc->bitmap[1] = ~0;
}
@@ -1159,135 +1148,9 @@ static int isp116x_hub_control(struct usb_hcd *hcd,
return ret;
}
-#ifdef CONFIG_PM
-
-static int isp116x_bus_suspend(struct usb_hcd *hcd)
-{
- struct isp116x *isp116x = hcd_to_isp116x(hcd);
- unsigned long flags;
- u32 val;
- int ret = 0;
-
- spin_lock_irqsave(&isp116x->lock, flags);
-
- val = isp116x_read_reg32(isp116x, HCCONTROL);
- switch (val & HCCONTROL_HCFS) {
- case HCCONTROL_USB_OPER:
- hcd->state = HC_STATE_QUIESCING;
- val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
- val |= HCCONTROL_USB_SUSPEND;
- if (hcd->remote_wakeup)
- val |= HCCONTROL_RWE;
- /* Wait for usb transfers to finish */
- mdelay(2);
- isp116x_write_reg32(isp116x, HCCONTROL, val);
- hcd->state = HC_STATE_SUSPENDED;
- /* Wait for devices to suspend */
- mdelay(5);
- case HCCONTROL_USB_SUSPEND:
- break;
- case HCCONTROL_USB_RESUME:
- isp116x_write_reg32(isp116x, HCCONTROL,
- (val & ~HCCONTROL_HCFS) |
- HCCONTROL_USB_RESET);
- case HCCONTROL_USB_RESET:
- ret = -EBUSY;
- break;
- default:
- ret = -EINVAL;
- }
-
- spin_unlock_irqrestore(&isp116x->lock, flags);
- return ret;
-}
-
-static int isp116x_bus_resume(struct usb_hcd *hcd)
-{
- struct isp116x *isp116x = hcd_to_isp116x(hcd);
- u32 val;
- int ret = -EINPROGRESS;
-
- msleep(5);
- spin_lock_irq(&isp116x->lock);
-
- val = isp116x_read_reg32(isp116x, HCCONTROL);
- switch (val & HCCONTROL_HCFS) {
- case HCCONTROL_USB_SUSPEND:
- val &= ~HCCONTROL_HCFS;
- val |= HCCONTROL_USB_RESUME;
- isp116x_write_reg32(isp116x, HCCONTROL, val);
- case HCCONTROL_USB_RESUME:
- break;
- case HCCONTROL_USB_OPER:
- /* Without setting power_state here the
- SUSPENDED state won't be removed from
- sysfs/usbN/power.state as a response to remote
- wakeup. Maybe in the future. */
- hcd->self.root_hub->dev.power.power_state = PMSG_ON;
- ret = 0;
- break;
- default:
- ret = -EBUSY;
- }
-
- if (ret != -EINPROGRESS) {
- spin_unlock_irq(&isp116x->lock);
- return ret;
- }
-
- val = isp116x->rhdesca & RH_A_NDP;
- while (val--) {
- u32 stat =
- isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1);
- /* force global, not selective, resume */
- if (!(stat & RH_PS_PSS))
- continue;
- DBG("%s: Resuming port %d\n", __func__, val);
- isp116x_write_reg32(isp116x, RH_PS_POCI, val
- ? HCRHPORT2 : HCRHPORT1);
- }
- spin_unlock_irq(&isp116x->lock);
-
- hcd->state = HC_STATE_RESUMING;
- mdelay(20);
-
- /* Go operational */
- spin_lock_irq(&isp116x->lock);
- val = isp116x_read_reg32(isp116x, HCCONTROL);
- isp116x_write_reg32(isp116x, HCCONTROL,
- (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER);
- spin_unlock_irq(&isp116x->lock);
- /* see analogous comment above */
- hcd->self.root_hub->dev.power.power_state = PMSG_ON;
- hcd->state = HC_STATE_RUNNING;
-
- return 0;
-}
-
-
-#else
-
-#define isp116x_bus_suspend NULL
-#define isp116x_bus_resume NULL
-
-#endif
-
/*-----------------------------------------------------------------*/
-#ifdef STUB_DEBUG_FILE
-
-static inline void create_debug_file(struct isp116x *isp116x)
-{
-}
-
-static inline void remove_debug_file(struct isp116x *isp116x)
-{
-}
-
-#else
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
+#ifdef CONFIG_DEBUG_FS
static void dump_irq(struct seq_file *s, char *label, u16 mask)
{
@@ -1311,13 +1174,9 @@ static void dump_int(struct seq_file *s, char *label, u32 mask)
mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : "");
}
-static int proc_isp116x_show(struct seq_file *s, void *unused)
+static int isp116x_show_dbg(struct seq_file *s, void *unused)
{
struct isp116x *isp116x = s->private;
- struct isp116x_ep *ep;
- struct urb *urb;
- unsigned i;
- char *str;
seq_printf(s, "%s\n%s version %s\n",
isp116x_to_hcd(isp116x)->product_desc, hcd_name,
@@ -1333,105 +1192,50 @@ static int proc_isp116x_show(struct seq_file *s, void *unused)
}
spin_lock_irq(&isp116x->lock);
-
dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB));
dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT));
dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB));
dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT));
-
- list_for_each_entry(ep, &isp116x->async, schedule) {
-
- switch (ep->nextpid) {
- case USB_PID_IN:
- str = "in";
- break;
- case USB_PID_OUT:
- str = "out";
- break;
- case USB_PID_SETUP:
- str = "setup";
- break;
- case USB_PID_ACK:
- str = "status";
- break;
- default:
- str = "?";
- break;
- };
- seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep,
- ep->epnum, str, ep->maxpacket);
- list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
- seq_printf(s, " urb%p, %d/%d\n", urb,
- urb->actual_length,
- urb->transfer_buffer_length);
- }
- }
- if (!list_empty(&isp116x->async))
- seq_printf(s, "\n");
-
- seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE);
-
- for (i = 0; i < PERIODIC_SIZE; i++) {
- ep = isp116x->periodic[i];
- if (!ep)
- continue;
- seq_printf(s, "%2d [%3d]:\n", i, isp116x->load[i]);
-
- /* DUMB: prints shared entries multiple times */
- do {
- seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n",
- ep->period, ep,
- (ep->udev->speed ==
- USB_SPEED_FULL) ? "" : "ls ",
- ep->udev->devnum, ep->epnum,
- (ep->epnum ==
- 0) ? "" : ((ep->nextpid ==
- USB_PID_IN) ? "in" : "out"),
- ep->maxpacket);
- ep = ep->next;
- } while (ep);
- }
+ isp116x_show_regs_seq(isp116x, s);
spin_unlock_irq(&isp116x->lock);
seq_printf(s, "\n");
return 0;
}
-static int proc_isp116x_open(struct inode *inode, struct file *file)
+static int isp116x_open_seq(struct inode *inode, struct file *file)
{
- return single_open(file, proc_isp116x_show, PDE(inode)->data);
+ return single_open(file, isp116x_show_dbg, inode->u.generic_ip);
}
-static struct file_operations proc_ops = {
- .open = proc_isp116x_open,
+static struct file_operations isp116x_debug_fops = {
+ .open = isp116x_open_seq,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-/* expect just one isp116x per system */
-static const char proc_filename[] = "driver/isp116x";
-
-static void create_debug_file(struct isp116x *isp116x)
+static int create_debug_file(struct isp116x *isp116x)
{
- struct proc_dir_entry *pde;
-
- pde = create_proc_entry(proc_filename, 0, NULL);
- if (pde == NULL)
- return;
-
- pde->proc_fops = &proc_ops;
- pde->data = isp116x;
- isp116x->pde = pde;
+ isp116x->dentry = debugfs_create_file(hcd_name,
+ S_IRUGO, NULL, isp116x,
+ &isp116x_debug_fops);
+ if (!isp116x->dentry)
+ return -ENOMEM;
+ return 0;
}
static void remove_debug_file(struct isp116x *isp116x)
{
- if (isp116x->pde)
- remove_proc_entry(proc_filename, NULL);
+ debugfs_remove(isp116x->dentry);
}
-#endif
+#else
+
+#define create_debug_file(d) 0
+#define remove_debug_file(d) do{}while(0)
+
+#endif /* CONFIG_DEBUG_FS */
/*-----------------------------------------------------------------*/
@@ -1466,7 +1270,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
struct isp116x *isp116x = hcd_to_isp116x(hcd);
unsigned long t;
u16 clkrdy = 0;
- int ret = 0, timeout = 15 /* ms */ ;
+ int ret, timeout = 15 /* ms */ ;
ret = isp116x_sw_reset(isp116x);
if (ret)
@@ -1482,7 +1286,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
break;
}
if (!clkrdy) {
- ERR("Clock not ready after 20ms\n");
+ ERR("Clock not ready after %dms\n", timeout);
/* After sw_reset the clock won't report to be ready, if
H_WAKEUP pin is high. */
ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
@@ -1572,7 +1376,8 @@ static int isp116x_start(struct usb_hcd *hcd)
val = 0;
if (board->remote_wakeup_enable) {
- hcd->can_wakeup = 1;
+ if (!device_can_wakeup(hcd->self.controller))
+ device_init_wakeup(hcd->self.controller, 1);
val |= RH_HS_DRWE;
}
isp116x_write_reg32(isp116x, HCRHSTATUS, val);
@@ -1600,12 +1405,126 @@ static int isp116x_start(struct usb_hcd *hcd)
isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
- isp116x_show_regs(isp116x);
+ isp116x_show_regs_log(isp116x);
spin_unlock_irqrestore(&isp116x->lock, flags);
return 0;
}
-/*-----------------------------------------------------------------*/
+#ifdef CONFIG_PM
+
+static int isp116x_bus_suspend(struct usb_hcd *hcd)
+{
+ struct isp116x *isp116x = hcd_to_isp116x(hcd);
+ unsigned long flags;
+ u32 val;
+ int ret = 0;
+
+ spin_lock_irqsave(&isp116x->lock, flags);
+
+ val = isp116x_read_reg32(isp116x, HCCONTROL);
+ switch (val & HCCONTROL_HCFS) {
+ case HCCONTROL_USB_OPER:
+ val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
+ val |= HCCONTROL_USB_SUSPEND;
+ if (device_may_wakeup(&hcd->self.root_hub->dev))
+ val |= HCCONTROL_RWE;
+ /* Wait for usb transfers to finish */
+ mdelay(2);
+ isp116x_write_reg32(isp116x, HCCONTROL, val);
+ /* Wait for devices to suspend */
+ mdelay(5);
+ case HCCONTROL_USB_SUSPEND:
+ break;
+ case HCCONTROL_USB_RESUME:
+ isp116x_write_reg32(isp116x, HCCONTROL,
+ (val & ~HCCONTROL_HCFS) |
+ HCCONTROL_USB_RESET);
+ case HCCONTROL_USB_RESET:
+ ret = -EBUSY;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock_irqrestore(&isp116x->lock, flags);
+ return ret;
+}
+
+static int isp116x_bus_resume(struct usb_hcd *hcd)
+{
+ struct isp116x *isp116x = hcd_to_isp116x(hcd);
+ u32 val;
+
+ msleep(5);
+ spin_lock_irq(&isp116x->lock);
+
+ val = isp116x_read_reg32(isp116x, HCCONTROL);
+ switch (val & HCCONTROL_HCFS) {
+ case HCCONTROL_USB_SUSPEND:
+ val &= ~HCCONTROL_HCFS;
+ val |= HCCONTROL_USB_RESUME;
+ isp116x_write_reg32(isp116x, HCCONTROL, val);
+ case HCCONTROL_USB_RESUME:
+ break;
+ case HCCONTROL_USB_OPER:
+ spin_unlock_irq(&isp116x->lock);
+ /* Without setting power_state here the
+ SUSPENDED state won't be removed from
+ sysfs/usbN/power.state as a response to remote
+ wakeup. Maybe in the future. */
+ hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+ return 0;
+ default:
+ /* HCCONTROL_USB_RESET: this may happen, when during
+ suspension the HC lost power. Reinitialize completely */
+ spin_unlock_irq(&isp116x->lock);
+ DBG("Chip has been reset while suspended. Reinit from scratch.\n");
+ isp116x_reset(hcd);
+ isp116x_start(hcd);
+ isp116x_hub_control(hcd, SetPortFeature,
+ USB_PORT_FEAT_POWER, 1, NULL, 0);
+ if ((isp116x->rhdesca & RH_A_NDP) == 2)
+ isp116x_hub_control(hcd, SetPortFeature,
+ USB_PORT_FEAT_POWER, 2, NULL, 0);
+ hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+ return 0;
+ }
+
+ val = isp116x->rhdesca & RH_A_NDP;
+ while (val--) {
+ u32 stat =
+ isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1);
+ /* force global, not selective, resume */
+ if (!(stat & RH_PS_PSS))
+ continue;
+ DBG("%s: Resuming port %d\n", __func__, val);
+ isp116x_write_reg32(isp116x, RH_PS_POCI, val
+ ? HCRHPORT2 : HCRHPORT1);
+ }
+ spin_unlock_irq(&isp116x->lock);
+
+ hcd->state = HC_STATE_RESUMING;
+ msleep(20);
+
+ /* Go operational */
+ spin_lock_irq(&isp116x->lock);
+ val = isp116x_read_reg32(isp116x, HCCONTROL);
+ isp116x_write_reg32(isp116x, HCCONTROL,
+ (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER);
+ spin_unlock_irq(&isp116x->lock);
+ /* see analogous comment above */
+ hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+ hcd->state = HC_STATE_RUNNING;
+
+ return 0;
+}
+
+#else
+
+#define isp116x_bus_suspend NULL
+#define isp116x_bus_resume NULL
+
+#endif
static struct hc_driver isp116x_hc_driver = {
.description = hcd_name,
@@ -1735,12 +1654,19 @@ static int __init isp116x_probe(struct platform_device *pdev)
}
ret = usb_add_hcd(hcd, irq, SA_INTERRUPT);
- if (ret != 0)
+ if (ret)
goto err6;
- create_debug_file(isp116x);
+ ret = create_debug_file(isp116x);
+ if (ret) {
+ ERR("Couldn't create debugfs entry\n");
+ goto err7;
+ }
+
return 0;
+ err7:
+ usb_remove_hcd(hcd);
err6:
usb_put_hcd(hcd);
err5:
@@ -1762,13 +1688,9 @@ static int __init isp116x_probe(struct platform_device *pdev)
*/
static int isp116x_suspend(struct platform_device *dev, pm_message_t state)
{
- int ret = 0;
-
- VDBG("%s: state %x\n", __func__, state);
-
+ VDBG("%s: state %x\n", __func__, state.event);
dev->dev.power.power_state = state;
-
- return ret;
+ return 0;
}
/*
@@ -1776,13 +1698,9 @@ static int isp116x_suspend(struct platform_device *dev, pm_message_t state)
*/
static int isp116x_resume(struct platform_device *dev)
{
- int ret = 0;
-
- VDBG("%s: state %x\n", __func__, dev->dev.power.power_state);
-
+ VDBG("%s: state %x\n", __func__, dev->power.power_state.event);
dev->dev.power.power_state = PMSG_ON;
-
- return ret;
+ return 0;
}
#else
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index c6fec96785fe..a1b7c3813d3a 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -259,7 +259,7 @@ struct isp116x {
struct isp116x_platform_data *board;
- struct proc_dir_entry *pde;
+ struct dentry *dentry;
unsigned long stat1, stat2, stat4, stat8, stat16;
/* HC registers */
@@ -450,7 +450,7 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
isp116x_write_data32(isp116x, (u32) val);
}
-#define isp116x_show_reg(d,r) { \
+#define isp116x_show_reg_log(d,r,s) { \
if ((r) < 0x20) { \
DBG("%-12s[%02x]: %08x\n", #r, \
r, isp116x_read_reg32(d, r)); \
@@ -459,35 +459,60 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
r, isp116x_read_reg16(d, r)); \
} \
}
+#define isp116x_show_reg_seq(d,r,s) { \
+ if ((r) < 0x20) { \
+ seq_printf(s, "%-12s[%02x]: %08x\n", #r, \
+ r, isp116x_read_reg32(d, r)); \
+ } else { \
+ seq_printf(s, "%-12s[%02x]: %04x\n", #r, \
+ r, isp116x_read_reg16(d, r)); \
+ } \
+}
-static inline void isp116x_show_regs(struct isp116x *isp116x)
+#define isp116x_show_regs(d,type,s) { \
+ isp116x_show_reg_##type(d, HCREVISION, s); \
+ isp116x_show_reg_##type(d, HCCONTROL, s); \
+ isp116x_show_reg_##type(d, HCCMDSTAT, s); \
+ isp116x_show_reg_##type(d, HCINTSTAT, s); \
+ isp116x_show_reg_##type(d, HCINTENB, s); \
+ isp116x_show_reg_##type(d, HCFMINTVL, s); \
+ isp116x_show_reg_##type(d, HCFMREM, s); \
+ isp116x_show_reg_##type(d, HCFMNUM, s); \
+ isp116x_show_reg_##type(d, HCLSTHRESH, s); \
+ isp116x_show_reg_##type(d, HCRHDESCA, s); \
+ isp116x_show_reg_##type(d, HCRHDESCB, s); \
+ isp116x_show_reg_##type(d, HCRHSTATUS, s); \
+ isp116x_show_reg_##type(d, HCRHPORT1, s); \
+ isp116x_show_reg_##type(d, HCRHPORT2, s); \
+ isp116x_show_reg_##type(d, HCHWCFG, s); \
+ isp116x_show_reg_##type(d, HCDMACFG, s); \
+ isp116x_show_reg_##type(d, HCXFERCTR, s); \
+ isp116x_show_reg_##type(d, HCuPINT, s); \
+ isp116x_show_reg_##type(d, HCuPINTENB, s); \
+ isp116x_show_reg_##type(d, HCCHIPID, s); \
+ isp116x_show_reg_##type(d, HCSCRATCH, s); \
+ isp116x_show_reg_##type(d, HCITLBUFLEN, s); \
+ isp116x_show_reg_##type(d, HCATLBUFLEN, s); \
+ isp116x_show_reg_##type(d, HCBUFSTAT, s); \
+ isp116x_show_reg_##type(d, HCRDITL0LEN, s); \
+ isp116x_show_reg_##type(d, HCRDITL1LEN, s); \
+}
+
+/*
+ Dump registers for debugfs.
+*/
+static inline void isp116x_show_regs_seq(struct isp116x *isp116x,
+ struct seq_file *s)
+{
+ isp116x_show_regs(isp116x, seq, s);
+}
+
+/*
+ Dump registers to syslog.
+*/
+static inline void isp116x_show_regs_log(struct isp116x *isp116x)
{
- isp116x_show_reg(isp116x, HCREVISION);
- isp116x_show_reg(isp116x, HCCONTROL);
- isp116x_show_reg(isp116x, HCCMDSTAT);
- isp116x_show_reg(isp116x, HCINTSTAT);
- isp116x_show_reg(isp116x, HCINTENB);
- isp116x_show_reg(isp116x, HCFMINTVL);
- isp116x_show_reg(isp116x, HCFMREM);
- isp116x_show_reg(isp116x, HCFMNUM);
- isp116x_show_reg(isp116x, HCLSTHRESH);
- isp116x_show_reg(isp116x, HCRHDESCA);
- isp116x_show_reg(isp116x, HCRHDESCB);
- isp116x_show_reg(isp116x, HCRHSTATUS);
- isp116x_show_reg(isp116x, HCRHPORT1);
- isp116x_show_reg(isp116x, HCRHPORT2);
- isp116x_show_reg(isp116x, HCHWCFG);
- isp116x_show_reg(isp116x, HCDMACFG);
- isp116x_show_reg(isp116x, HCXFERCTR);
- isp116x_show_reg(isp116x, HCuPINT);
- isp116x_show_reg(isp116x, HCuPINTENB);
- isp116x_show_reg(isp116x, HCCHIPID);
- isp116x_show_reg(isp116x, HCSCRATCH);
- isp116x_show_reg(isp116x, HCITLBUFLEN);
- isp116x_show_reg(isp116x, HCATLBUFLEN);
- isp116x_show_reg(isp116x, HCBUFSTAT);
- isp116x_show_reg(isp116x, HCRDITL0LEN);
- isp116x_show_reg(isp116x, HCRDITL1LEN);
+ isp116x_show_regs(isp116x, log, NULL);
}
#if defined(URB_TRACE)
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index d9cf3b327d96..77cd6ac07e3c 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -19,6 +19,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/signal.h>
#include <asm/mach-au1x00/au1000.h>
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index bf1d9abc07ac..a4b12404ae08 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -75,13 +75,6 @@
*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#else
-# undef DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
@@ -802,7 +795,6 @@ static int ohci_restart (struct ohci_hcd *ohci)
int temp;
int i;
struct urb_priv *priv;
- struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub;
/* mark any devices gone, so they do nothing till khubd disconnects.
* recycle any "live" eds/tds (and urbs) right away.
@@ -811,11 +803,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
*/
spin_lock_irq(&ohci->lock);
disable (ohci);
- for (i = 0; i < root->maxchild; i++) {
- if (root->children [i])
- usb_set_device_state (root->children[i],
- USB_STATE_NOTATTACHED);
- }
+ usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
if (!list_empty (&ohci->pending))
ohci_dbg(ohci, "abort schedule...\n");
list_for_each_entry (priv, &ohci->pending, pending) {
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 72e3b12a1926..4b2226d77b34 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -372,7 +372,7 @@ done:
& ohci->hc_control)
== OHCI_USB_OPER
&& time_after (jiffies, ohci->next_statechange)
- && usb_trylock_device (hcd->self.root_hub)
+ && usb_trylock_device (hcd->self.root_hub) == 0
) {
ohci_vdbg (ohci, "autosuspend\n");
(void) ohci_bus_suspend (hcd);
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 3959ccc88332..0020ed7a39d0 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -17,6 +17,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/signal.h>
#include <asm/hardware.h>
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c9e29d808711..3785b3f7df1b 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -17,6 +17,7 @@
#include <linux/signal.h> /* SA_INTERRUPT */
#include <linux/jiffies.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -27,7 +28,6 @@
#include <asm/arch/gpio.h>
#include <asm/arch/fpga.h>
#include <asm/arch/usb.h>
-#include <asm/hardware/clock.h>
/* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 2ec6a78bd65e..b2a8dfa48870 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -15,6 +15,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/signal.h>
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 9d65ec307990..acde8868da21 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -26,18 +26,12 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
-
-
-#define PMM_NPS_MODE 1
-#define PMM_GLOBAL_MODE 2
-#define PMM_PERPORT_MODE 3
+#include <asm/arch/ohci.h>
#define PXA_UHC_MAX_PORTNUM 3
#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
-static int pxa27x_ohci_pmm_state;
-
/*
PMM_NPS_MODE -- PMM Non-power switching mode
Ports are powered continuously.
@@ -50,8 +44,6 @@ static int pxa27x_ohci_pmm_state;
*/
static int pxa27x_ohci_select_pmm( int mode )
{
- pxa27x_ohci_pmm_state = mode;
-
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
@@ -71,7 +63,6 @@ static int pxa27x_ohci_select_pmm( int mode )
"Invalid mode %d, set to non-power switch mode.\n",
mode );
- pxa27x_ohci_pmm_state = PMM_NPS_MODE;
UHCRHDA |= RH_A_NPS;
}
@@ -82,8 +73,13 @@ extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static void pxa27x_start_hc(struct platform_device *dev)
+static int pxa27x_start_hc(struct device *dev)
{
+ int retval = 0;
+ struct pxaohci_platform_data *inf;
+
+ inf = dev->platform_data;
+
pxa_set_cken(CKEN10_USBHOST, 1);
UHCHR |= UHCHR_FHR;
@@ -94,21 +90,11 @@ static void pxa27x_start_hc(struct platform_device *dev)
while (UHCHR & UHCHR_FSBIR)
cpu_relax();
- /* This could be properly abstracted away through the
- device data the day more machines are supported and
- their differences can be figured out correctly. */
- if (machine_is_mainstone()) {
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. Supply power to USB ports. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+ if (inf->init)
+ retval = inf->init(dev);
- pxa27x_ohci_pmm_state = PMM_PERPORT_MODE;
- }
+ if (retval < 0)
+ return retval;
UHCHR &= ~UHCHR_SSE;
@@ -117,10 +103,19 @@ static void pxa27x_start_hc(struct platform_device *dev)
/* Clear any OTG Pin Hold */
if (PSSR & PSSR_OTGPH)
PSSR |= PSSR_OTGPH;
+
+ return 0;
}
-static void pxa27x_stop_hc(struct platform_device *dev)
+static void pxa27x_stop_hc(struct device *dev)
{
+ struct pxaohci_platform_data *inf;
+
+ inf = dev->platform_data;
+
+ if (inf->exit)
+ inf->exit(dev);
+
UHCHR |= UHCHR_FHR;
udelay(11);
UHCHR &= ~UHCHR_FHR;
@@ -147,22 +142,27 @@ static void pxa27x_stop_hc(struct platform_device *dev)
* through the hotplug entry's driver_data.
*
*/
-int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
- struct platform_device *dev)
+int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
{
int retval;
struct usb_hcd *hcd;
+ struct pxaohci_platform_data *inf;
- if (dev->resource[1].flags != IORESOURCE_IRQ) {
+ inf = pdev->dev.platform_data;
+
+ if (!inf)
+ return -ENODEV;
+
+ if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug ("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
}
- hcd = usb_create_hcd (driver, &dev->dev, "pxa27x");
+ hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
if (!hcd)
return -ENOMEM;
- hcd->rsrc_start = dev->resource[0].start;
- hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+ hcd->rsrc_start = pdev->resource[0].start;
+ hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
@@ -177,18 +177,22 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
goto err2;
}
- pxa27x_start_hc(dev);
+ if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
+ pr_debug("pxa27x_start_hc failed");
+ goto err3;
+ }
/* Select Power Management Mode */
- pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state);
+ pxa27x_ohci_select_pmm(inf->port_mode);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
if (retval == 0)
return retval;
- pxa27x_stop_hc(dev);
+ pxa27x_stop_hc(&pdev->dev);
+ err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -211,10 +215,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
* context, normally "rmmod", "apmd", or something similar.
*
*/
-void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev)
+void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
usb_remove_hcd(hcd);
- pxa27x_stop_hc(dev);
+ pxa27x_stop_hc(&pdev->dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
@@ -292,15 +296,12 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev)
{
- int ret;
-
pr_debug ("In ohci_hcd_pxa27x_drv_probe");
if (usb_disabled())
return -ENODEV;
- ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
- return ret;
+ return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
}
static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
@@ -308,31 +309,55 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_pxa27x_remove(hcd, pdev);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
-static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
-// struct usb_hcd *hcd = platform_get_drvdata(dev);
- printk("%s: not implemented yet\n", __FUNCTION__);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ pxa27x_stop_hc(&pdev->dev);
+ hcd->state = HC_STATE_SUSPENDED;
+ pdev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
-static int ohci_hcd_pxa27x_drv_resume(struct platform_device *dev)
+static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
{
-// struct usb_hcd *hcd = platform_get_drvdata(dev);
- printk("%s: not implemented yet\n", __FUNCTION__);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int status;
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
+ return status;
+
+ pdev->dev.power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(hcd);
return 0;
}
+#endif
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
+#ifdef CONFIG_PM
.suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
+#endif
.driver = {
.name = "pxa27x-ohci",
},
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 35cc9402adc0..372527a83593 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -20,9 +20,9 @@
*/
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
-#include <asm/hardware/clock.h>
#include <asm/arch/usb-control.h>
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
@@ -363,7 +363,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
goto err1;
}
- clk_use(clk);
s3c2410_start_hc(dev, hcd);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
@@ -384,7 +383,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
err2:
s3c2410_stop_hc(dev);
iounmap(hcd->regs);
- clk_unuse(clk);
clk_put(clk);
err1:
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index e46528c825bf..3ef2c0cdf1db 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -9,12 +9,6 @@
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#else
-#undef DEBUG
-#endif
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a7722a6a5a5b..517360b77d8e 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -32,13 +32,6 @@
#undef PACKET_TRACE
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#else
-# undef DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
@@ -1581,7 +1574,9 @@ sl811h_start(struct usb_hcd *hcd)
hcd->state = HC_STATE_RUNNING;
if (sl811->board) {
- hcd->can_wakeup = sl811->board->can_wakeup;
+ if (!device_can_wakeup(hcd->self.controller))
+ device_init_wakeup(hcd->self.controller,
+ sl811->board->can_wakeup);
hcd->power_budget = sl811->board->power * 2;
}
@@ -1805,9 +1800,10 @@ sl811h_resume(struct platform_device *dev)
* let's assume it'd only be powered to enable remote wakeup.
*/
if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND
- || !hcd->can_wakeup) {
+ || !device_can_wakeup(&hcd->self.root_hub->dev)) {
sl811->port1 = 0;
port_power(sl811, 1);
+ usb_root_hub_lost_power(hcd->self.root_hub);
return 0;
}
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index e73faf831b24..466384d7c79f 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -38,7 +38,7 @@ MODULE_LICENSE("GPL");
/* MACROS */
/*====================================================================*/
-#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG)
+#if defined(DEBUG) || defined(PCMCIA_DEBUG)
static int pc_debug = 0;
module_param(pc_debug, int, 0644);
@@ -66,13 +66,13 @@ module_param(pc_debug, int, 0644);
static const char driver_name[DEV_NAME_LEN] = "sl811_cs";
-static dev_link_t *dev_list = NULL;
-
typedef struct local_info_t {
dev_link_t link;
dev_node_t node;
} local_info_t;
+static void sl811_cs_release(dev_link_t * link);
+
/*====================================================================*/
static void release_platform_dev(struct device * dev)
@@ -129,7 +129,8 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
resources[2].end = base_addr + 1;
/* The driver core will probe for us. We know sl811-hcd has been
- * initialized already because of the link order dependency.
+ * initialized already because of the link order dependency created
+ * by referencing "sl811h_driver".
*/
platform_dev.name = sl811h_driver.name;
return platform_device_register(&platform_dev);
@@ -137,26 +138,16 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
/*====================================================================*/
-static void sl811_cs_detach(dev_link_t *link)
+static void sl811_cs_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
+ dev_link_t *link = dev_to_instance(p_dev);
DBG(0, "sl811_cs_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
- if (*linkp == link)
- break;
- }
- if (*linkp == NULL)
- return;
-
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG)
+ sl811_cs_release(link);
- /* Unlink device structure, and free it */
- *linkp = link->next;
/* This points to the parent local_info_t struct */
kfree(link->priv);
}
@@ -166,13 +157,6 @@ static void sl811_cs_release(dev_link_t * link)
DBG(0, "sl811_cs_release(0x%p)\n", link);
- if (link->open) {
- DBG(1, "sl811_cs: release postponed, '%s' still open\n",
- link->dev->dev_name);
- link->state |= DEV_STALE_CONFIG;
- return;
- }
-
/* Unlink the device chain */
link->dev = NULL;
@@ -183,9 +167,6 @@ static void sl811_cs_release(dev_link_t * link)
if (link->irq.AssignedIRQ)
pcmcia_release_irq(link->handle, &link->irq);
link->state &= ~DEV_CONFIG;
-
- if (link->state & DEV_STALE_LINK)
- sl811_cs_detach(link);
}
static void sl811_cs_config(dev_link_t *link)
@@ -322,55 +303,36 @@ cs_failed:
}
}
-static int
-sl811_cs_event(event_t event, int priority, event_callback_args_t *args)
+static int sl811_suspend(struct pcmcia_device *dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(dev);
- DBG(1, "sl811_cs_event(0x%06x)\n", event);
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG)
+ pcmcia_release_configuration(link->handle);
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- sl811_cs_release(link);
- break;
+ return 0;
+}
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- sl811_cs_config(link);
- break;
+static int sl811_resume(struct pcmcia_device *dev)
+{
+ dev_link_t *link = dev_to_instance(dev);
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG)
- pcmcia_release_configuration(link->handle);
- break;
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG)
+ pcmcia_request_configuration(link->handle, &link->conf);
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG)
- pcmcia_request_configuration(link->handle, &link->conf);
- DBG(0, "reset sl811-hcd here?\n");
- break;
- }
return 0;
}
-static dev_link_t *sl811_cs_attach(void)
+static int sl811_cs_attach(struct pcmcia_device *p_dev)
{
local_info_t *local;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local)
- return NULL;
+ return -ENOMEM;
memset(local, 0, sizeof(local_info_t));
link = &local->link;
link->priv = local;
@@ -384,21 +346,13 @@ static dev_link_t *sl811_cs_attach(void)
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = (dev_info_t *) &driver_name;
- client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- sl811_cs_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ sl811_cs_config(link);
+
+ return 0;
}
static struct pcmcia_device_id sl811_ids[] = {
@@ -412,10 +366,11 @@ static struct pcmcia_driver sl811_cs_driver = {
.drv = {
.name = (char *)driver_name,
},
- .attach = sl811_cs_attach,
- .event = sl811_cs_event,
- .detach = sl811_cs_detach,
+ .probe = sl811_cs_attach,
+ .remove = sl811_cs_detach,
.id_table = sl811_ids,
+ .suspend = sl811_suspend,
+ .resume = sl811_resume,
};
/*====================================================================*/
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 151154df37fa..5832953086f8 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -2,8 +2,8 @@
* UHCI-specific debugging code. Invaluable when something
* goes wrong, but don't get in my face.
*
- * Kernel visible pointers are surrounded in []'s and bus
- * visible pointers are surrounded in ()'s
+ * Kernel visible pointers are surrounded in []s and bus
+ * visible pointers are surrounded in ()s
*
* (C) Copyright 1999 Linus Torvalds
* (C) Copyright 1999-2001 Johannes Erdfelt
@@ -19,7 +19,7 @@
static struct dentry *uhci_debugfs_root = NULL;
-/* Handle REALLY large printk's so we don't overflow buffers */
+/* Handle REALLY large printks so we don't overflow buffers */
static inline void lprintk(char *buf)
{
char *p;
@@ -160,7 +160,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
}
if (active && ni > i) {
- out += sprintf(out, "%*s[skipped %d active TD's]\n", space, "", ni - i);
+ out += sprintf(out, "%*s[skipped %d active TDs]\n", space, "", ni - i);
tmp = ntmp;
td = ntd;
i = ni;
@@ -173,7 +173,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
if (list_empty(&urbp->queue_list) || urbp->queued)
goto out;
- out += sprintf(out, "%*sQueued QH's:\n", -space, "--");
+ out += sprintf(out, "%*sQueued QHs:\n", -space, "--");
head = &urbp->queue_list;
tmp = head->next;
@@ -197,7 +197,7 @@ out:
}
#ifdef CONFIG_PROC_FS
-static const char *qh_names[] = {
+static const char * const qh_names[] = {
"skel_int128_qh", "skel_int64_qh",
"skel_int32_qh", "skel_int16_qh",
"skel_int8_qh", "skel_int4_qh",
@@ -464,7 +464,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
} while (tmp != head);
}
- out += sprintf(out, "Skeleton QH's\n");
+ out += sprintf(out, "Skeleton QHs\n");
for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
int shown = 0;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index ed550132db0b..dfe121d35887 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -23,11 +23,6 @@
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#else
-#undef DEBUG
-#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -67,10 +62,10 @@ Alan Stern"
/*
* debug = 0, no debugging messages
- * debug = 1, dump failed URB's except for stalls
- * debug = 2, dump all failed URB's (including stalls)
+ * debug = 1, dump failed URBs except for stalls
+ * debug = 2, dump all failed URBs (including stalls)
* show all queues in /debug/uhci/[pci_addr]
- * debug = 3, show all TD's in URB's when dumping
+ * debug = 3, show all TDs in URBs when dumping
*/
#ifdef DEBUG
static int debug = 1;
@@ -93,7 +88,7 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
#define FSBR_DELAY msecs_to_jiffies(50)
/* When we timeout an idle transfer for FSBR, we'll switch it over to */
-/* depth first traversal. We'll do it in groups of this number of TD's */
+/* depth first traversal. We'll do it in groups of this number of TDs */
/* to make sure it doesn't hog all of the bandwidth */
#define DEPTH_INTERVAL 5
@@ -478,8 +473,6 @@ static int uhci_start(struct usb_hcd *hcd)
struct dentry *dentry;
hcd->uses_new_polling = 1;
- if (pci_find_capability(to_pci_dev(uhci_dev(uhci)), PCI_CAP_ID_PM))
- hcd->can_wakeup = 1; /* Assume it supports PME# */
dentry = debugfs_create_file(hcd->self.bus_name,
S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci,
@@ -573,7 +566,7 @@ static int uhci_start(struct usb_hcd *hcd)
uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
/* This dummy TD is to work around a bug in Intel PIIX controllers */
- uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
+ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
@@ -717,6 +710,7 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
* at the source, so we must turn off PIRQ.
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+ mb();
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
uhci->hc_inaccessible = 1;
hcd->poll_rh = 0;
@@ -734,10 +728,12 @@ static int uhci_resume(struct usb_hcd *hcd)
dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
- /* We aren't in D3 state anymore, we do that even if dead as I
- * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0
+ /* Since we aren't in D3 any more, it's safe to set this flag
+ * even if the controller was dead. It might not even be dead
+ * any more, if the firmware or quirks code has reset it.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ mb();
if (uhci->rh_state == UHCI_RH_RESET) /* Dead */
return 0;
@@ -753,8 +749,12 @@ static int uhci_resume(struct usb_hcd *hcd)
check_and_reset_hc(uhci);
configure_hc(uhci);
- if (uhci->rh_state == UHCI_RH_RESET)
+ if (uhci->rh_state == UHCI_RH_RESET) {
+
+ /* The controller had to be reset */
+ usb_root_hub_lost_power(hcd->self.root_hub);
suspend_rh(uhci, UHCI_RH_SUSPENDED);
+ }
spin_unlock_irq(&uhci->lock);
@@ -880,7 +880,7 @@ static int __init uhci_hcd_init(void)
init_failed:
if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
+ warn("not all urb_privs were freed!");
up_failed:
debugfs_remove(uhci_debugfs_root);
@@ -898,7 +898,7 @@ static void __exit uhci_hcd_cleanup(void)
pci_unregister_driver(&uhci_pci_driver);
if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
+ warn("not all urb_privs were freed!");
debugfs_remove(uhci_debugfs_root);
kfree(errbuf);
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index e576db57a926..8b4b887a7d41 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -71,8 +71,6 @@
#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
-#define UHCI_NULL_DATA_SIZE 0x7FF /* for UHCI controller TD */
-
#define UHCI_PTR_BITS cpu_to_le32(0x000F)
#define UHCI_PTR_TERM cpu_to_le32(0x0001)
#define UHCI_PTR_QH cpu_to_le32(0x0002)
@@ -168,9 +166,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n - 1 */
#define TD_TOKEN_PID_MASK 0xFF
-#define uhci_explen(len) ((len) << TD_TOKEN_EXPLEN_SHIFT)
+#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
+ TD_TOKEN_EXPLEN_SHIFT)
-#define uhci_expected_length(token) ((((token) >> 21) + 1) & TD_TOKEN_EXPLEN_MASK)
+#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
+ 1) & TD_TOKEN_EXPLEN_MASK)
#define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1)
#define uhci_endpoint(token) (((token) >> 15) & 0xf)
#define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f)
@@ -223,10 +223,10 @@ static u32 inline td_status(struct uhci_td *td) {
*/
/*
- * The UHCI driver places Interrupt, Control and Bulk into QH's both
- * to group together TD's for one transfer, and also to faciliate queuing
- * of URB's. To make it easy to insert entries into the schedule, we have
- * a skeleton of QH's for each predefined Interrupt latency, low-speed
+ * The UHCI driver places Interrupt, Control and Bulk into QHs both
+ * to group together TDs for one transfer, and also to facilitate queuing
+ * of URBs. To make it easy to insert entries into the schedule, we have
+ * a skeleton of QHs for each predefined Interrupt latency, low-speed
* control, full-speed control and terminating QH (see explanation for
* the terminating QH below).
*
@@ -257,8 +257,8 @@ static u32 inline td_status(struct uhci_td *td) {
* reclamation.
*
* Isochronous transfers are stored before the start of the skeleton
- * schedule and don't use QH's. While the UHCI spec doesn't forbid the
- * use of QH's for Isochronous, it doesn't use them either. And the spec
+ * schedule and don't use QHs. While the UHCI spec doesn't forbid the
+ * use of QHs for Isochronous, it doesn't use them either. And the spec
* says that queues never advance on an error completion status, which
* makes them totally unsuitable for Isochronous transfers.
*/
@@ -359,7 +359,7 @@ struct uhci_hcd {
struct dma_pool *td_pool;
struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
- struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
+ struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */
spinlock_t lock;
@@ -389,22 +389,22 @@ struct uhci_hcd {
unsigned long resuming_ports;
unsigned long ports_timeout; /* Time to stop signalling */
- /* Main list of URB's currently controlled by this HC */
+ /* Main list of URBs currently controlled by this HC */
struct list_head urb_list;
- /* List of QH's that are done, but waiting to be unlinked (race) */
+ /* List of QHs that are done, but waiting to be unlinked (race) */
struct list_head qh_remove_list;
unsigned int qh_remove_age; /* Age in frames */
- /* List of TD's that are done, but waiting to be freed (race) */
+ /* List of TDs that are done, but waiting to be freed (race) */
struct list_head td_remove_list;
unsigned int td_remove_age; /* Age in frames */
- /* List of asynchronously unlinked URB's */
+ /* List of asynchronously unlinked URBs */
struct list_head urb_remove_list;
unsigned int urb_remove_age; /* Age in frames */
- /* List of URB's awaiting completion callback */
+ /* List of URBs awaiting completion callback */
struct list_head complete_list;
int rh_numports; /* Number of root-hub ports */
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 7e46887d9e12..b6076004a437 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -80,7 +80,7 @@ static inline void uhci_fill_td(struct uhci_td *td, u32 status,
}
/*
- * We insert Isochronous URB's directly into the frame list at the beginning
+ * We insert Isochronous URBs directly into the frame list at the beginning
*/
static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
{
@@ -369,7 +369,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru
uhci_fixup_toggle(urb,
uhci_toggle(td_token(lltd)) ^ 1));
- /* All qh's in the queue need to link to the next queue */
+ /* All qhs in the queue need to link to the next queue */
urbp->qh->link = eurbp->qh->link;
wmb(); /* Make sure we flush everything */
@@ -502,7 +502,7 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
}
/* Check to see if the remove list is empty. Set the IOC bit */
- /* to force an interrupt so we can remove the TD's*/
+ /* to force an interrupt so we can remove the TDs*/
if (list_empty(&uhci->td_remove_list))
uhci_set_next_interrupt(uhci);
@@ -596,7 +596,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(7),
+ uhci_fill_td(td, status, destination | uhci_explen(8),
urb->setup_dma);
/*
@@ -612,7 +612,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur
}
/*
- * Build the DATA TD's
+ * Build the DATA TDs
*/
while (len > 0) {
int pktsze = len;
@@ -628,7 +628,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur
destination ^= TD_TOKEN_TOGGLE;
uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1),
+ uhci_fill_td(td, status, destination | uhci_explen(pktsze),
data);
data += pktsze;
@@ -658,7 +658,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur
uhci_add_td_to_urb(urb, td);
uhci_fill_td(td, status | TD_CTRL_IOC,
- destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0);
+ destination | uhci_explen(0), 0);
qh = uhci_alloc_qh(uhci);
if (!qh)
@@ -744,7 +744,7 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
urb->actual_length = 0;
- /* The rest of the TD's (but the last) are data */
+ /* The rest of the TDs (but the last) are data */
tmp = tmp->next;
while (tmp != head && tmp->next != head) {
unsigned int ctrlstat;
@@ -848,7 +848,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb
status |= TD_CTRL_SPD;
/*
- * Build the DATA TD's
+ * Build the DATA TDs
*/
do { /* Allow zero length packets */
int pktsze = maxsze;
@@ -864,7 +864,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
+ uhci_fill_td(td, status, destination | uhci_explen(pktsze) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
@@ -890,7 +890,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
+ uhci_fill_td(td, status, destination | uhci_explen(0) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
@@ -1025,7 +1025,7 @@ static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsig
list_for_each_entry(up, &uhci->urb_list, urb_list) {
struct urb *u = up->urb;
- /* look for pending URB's with identical pipe handle */
+ /* look for pending URBs with identical pipe handle */
if ((urb->pipe == u->pipe) && (urb->dev == u->dev) &&
(u->status == -EINPROGRESS) && (u != urb)) {
if (!last_urb)
@@ -1092,7 +1092,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1),
+ uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length),
urb->transfer_dma + urb->iso_frame_desc[i].offset);
if (i + 1 >= urb->number_of_packets)
@@ -1355,7 +1355,7 @@ static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb)
uhci_delete_queued_urb(uhci, urb);
- /* The interrupt loop will reclaim the QH's */
+ /* The interrupt loop will reclaim the QHs */
uhci_remove_qh(uhci, urbp->qh);
urbp->qh = NULL;
}
@@ -1413,7 +1413,7 @@ static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb)
list_for_each_entry(td, head, list) {
/*
* Make sure we don't do the last one (since it'll have the
- * TERM bit set) as well as we skip every so many TD's to
+ * TERM bit set) as well as we skip every so many TDs to
* make sure it doesn't hog the bandwidth
*/
if (td->list.next != head && (count % DEPTH_INTERVAL) ==
OpenPOWER on IntegriCloud