summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ohci-pci.c')
-rw-r--r--drivers/usb/host/ohci-pci.c21
1 files changed, 16 insertions, 5 deletions
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index b611582e6bcf..57fd07d00549 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -54,7 +54,7 @@ ohci_pci_start (struct usb_hcd *hcd)
if (pdev->vendor == PCI_VENDOR_ID_AMD
&& pdev->device == 0x740c) {
ohci->flags = OHCI_QUIRK_AMD756;
- ohci_info (ohci, "AMD756 erratum 4 workaround\n");
+ ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
// also somewhat erratum 10 (suspend/resume issues)
}
@@ -68,7 +68,7 @@ ohci_pci_start (struct usb_hcd *hcd)
*/
else if (pdev->vendor == PCI_VENDOR_ID_OPTI
&& pdev->device == 0xc861) {
- ohci_info (ohci,
+ ohci_dbg (ohci,
"WARNING: OPTi workarounds unavailable\n");
}
@@ -84,9 +84,20 @@ ohci_pci_start (struct usb_hcd *hcd)
if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
&& b->vendor == PCI_VENDOR_ID_NS) {
ohci->flags |= OHCI_QUIRK_SUPERIO;
- ohci_info (ohci, "Using NSC SuperIO setup\n");
+ ohci_dbg (ohci, "Using NSC SuperIO setup\n");
}
}
+
+ /* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+ else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ
+ && pdev->device == 0xa0f8) {
+ ohci->flags |= OHCI_QUIRK_ZFMICRO;
+ ohci_dbg (ohci,
+ "enabled Compaq ZFMicro chipset quirk\n");
+ }
}
/* NOTE: there may have already been a first reset, to
@@ -102,7 +113,7 @@ ohci_pci_start (struct usb_hcd *hcd)
#ifdef CONFIG_PM
-static int ohci_pci_suspend (struct usb_hcd *hcd, u32 state)
+static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -111,7 +122,7 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, u32 state)
msleep (100);
#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, state);
+ (void) usb_suspend_device (hcd->self.root_hub, message);
#else
usb_lock_device (hcd->self.root_hub);
(void) ohci_hub_suspend (hcd);
OpenPOWER on IntegriCloud