summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
-rw-r--r--drivers/usb/host/ohci-hcd.c64
1 files changed, 43 insertions, 21 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 94d8cf4b36c1..d1d68c402251 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -88,7 +88,7 @@
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/usb.h>
-#include <linux/usb_otg.h>
+#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
@@ -101,7 +101,7 @@
#include "../core/hcd.h"
-#define DRIVER_VERSION "2005 April 22"
+#define DRIVER_VERSION "2006 August 04"
#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
@@ -110,9 +110,10 @@
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
#define OHCI_INTR_INIT \
- (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
+ (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
+ | OHCI_INTR_RD | OHCI_INTR_WDH)
#ifdef __hppa__
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
@@ -128,12 +129,13 @@
static const char hcd_name [] = "ohci_hcd";
+#define STATECHANGE_DELAY msecs_to_jiffies(300)
+
#include "ohci.h"
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
-static int ohci_reboot (struct notifier_block *, unsigned long , void *);
#include "ohci-hub.c"
#include "ohci-dbg.c"
@@ -416,21 +418,20 @@ static void ohci_usb_reset (struct ohci_hcd *ohci)
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
}
-/* reboot notifier forcibly disables IRQs and DMA, helping kexec and
+/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
* other cases where the next software may expect clean state from the
* "firmware". this is bus-neutral, unlike shutdown() methods.
*/
-static int
-ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
+static void
+ohci_shutdown (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci;
- ohci = container_of (block, struct ohci_hcd, reboot_notifier);
+ ohci = hcd_to_ohci (hcd);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
ohci_usb_reset (ohci);
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
- return 0;
}
/*-------------------------------------------------------------------------*
@@ -446,7 +447,6 @@ static int ohci_init (struct ohci_hcd *ohci)
disable (ohci);
ohci->regs = hcd->regs;
- ohci->next_statechange = jiffies;
/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
* was never needed for most non-PCI systems ... remove the code?
@@ -502,7 +502,6 @@ static int ohci_init (struct ohci_hcd *ohci)
if ((ret = ohci_mem_init (ohci)) < 0)
ohci_stop (hcd);
else {
- register_reboot_notifier (&ohci->reboot_notifier);
create_debug_files (ohci);
}
@@ -637,10 +636,14 @@ retry:
return -EOVERFLOW;
}
- /* start controller operations */
+ /* use rhsc irqs after khubd is fully initialized */
+ hcd->poll_rh = 1;
+ hcd->uses_new_polling = 1;
+
+ /* start controller operations */
ohci->hc_control &= OHCI_CTRL_RWC;
- ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
hcd->state = HC_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
@@ -648,7 +651,7 @@ retry:
/* Choose the interrupts we care about now, others later on demand */
mask = OHCI_INTR_INIT;
- ohci_writel (ohci, mask, &ohci->regs->intrstatus);
+ ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
ohci_writel (ohci, mask, &ohci->regs->intrenable);
/* handle root hub init quirks ... */
@@ -672,6 +675,7 @@ retry:
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
spin_unlock_irq (&ohci->lock);
// POTPGT delay is bits 24-31, in 2 ms units.
@@ -709,7 +713,14 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
/* interrupt for some other device? */
} else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
return IRQ_NOTMINE;
- }
+ }
+
+ if (ints & OHCI_INTR_RHSC) {
+ ohci_vdbg (ohci, "rhsc\n");
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+ ohci_writel (ohci, OHCI_INTR_RHSC, &regs->intrstatus);
+ usb_hcd_poll_rh_status(hcd);
+ }
if (ints & OHCI_INTR_UE) {
disable (ohci);
@@ -723,13 +734,18 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
if (ints & OHCI_INTR_RD) {
ohci_vdbg (ohci, "resume detect\n");
ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
- if (hcd->state != HC_STATE_QUIESCING)
+ hcd->poll_rh = 1;
+ if (ohci->autostop) {
+ spin_lock (&ohci->lock);
+ ohci_rh_resume (ohci);
+ spin_unlock (&ohci->lock);
+ } else
usb_hcd_resume_root_hub(hcd);
}
if (ints & OHCI_INTR_WDH) {
if (HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
+ ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
spin_lock (&ohci->lock);
dl_done_list (ohci, ptregs);
spin_unlock (&ohci->lock);
@@ -775,9 +791,10 @@ static void ohci_stop (struct usb_hcd *hcd)
ohci_usb_reset (ohci);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
remove_debug_files (ohci);
- unregister_reboot_notifier (&ohci->reboot_notifier);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
dma_free_coherent (hcd->self.controller,
@@ -917,6 +934,10 @@ MODULE_LICENSE ("GPL");
#include "ohci-at91.c"
#endif
+#ifdef CONFIG_ARCH_PNX4008
+#include "ohci-pnx4008.c"
+#endif
+
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_S3C2410) \
@@ -928,6 +949,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
|| defined (CONFIG_ARCH_AT91SAM9261) \
+ || defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"
#endif
OpenPOWER on IntegriCloud