diff options
Diffstat (limited to 'drivers/usb/gadget/s3c-hsotg.c')
| -rw-r--r-- | drivers/usb/gadget/s3c-hsotg.c | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 1f73b485732d..26193eceb323 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -297,6 +297,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, */ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) { + unsigned int ep; + unsigned int addr; + unsigned int size; + int timeout; + u32 val; + /* the ryu 2.6.24 release ahs writel(0x1C0, hsotg->regs + S3C_GRXFSIZ); writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) | @@ -310,6 +316,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | S3C_GNPTXFSIZ_NPTxFDep(0x1C0), hsotg->regs + S3C_GNPTXFSIZ); + + /* arange all the rest of the TX FIFOs, as some versions of this + * block have overlapping default addresses. This also ensures + * that if the settings have been changed, then they are set to + * known values. */ + + /* start at the end of the GNPTXFSIZ, rounded up */ + addr = 2048 + 1024; + size = 768; + + /* currently we allocate TX FIFOs for all possible endpoints, + * and assume that they are all the same size. */ + + for (ep = 0; ep <= 15; ep++) { + val = addr; + val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT; + addr += size; + + writel(val, hsotg->regs + S3C_DPTXFSIZn(ep)); + } + + /* according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing */ + + writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh | + S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL); + + /* wait until the fifos are both flushed */ + timeout = 100; + while (1) { + val = readl(hsotg->regs + S3C_GRSTCTL); + + if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0) + break; + + if (--timeout == 0) { + dev_err(hsotg->dev, + "%s: timeout flushing fifos (GRSTCTL=%08x)\n", + __func__, val); + } + + udelay(1); + } + + dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout); } /** @@ -2574,6 +2625,9 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL); + /* must be at-least 3ms to allow bus to see disconnect */ + msleep(3); + /* remove the soft-disconnect and let's go */ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); @@ -2730,6 +2784,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) writel(0, hsotg->regs + S3C_DAINTMSK); + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + if (0) { /* post global nak until we're ready */ writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, |
