diff options
Diffstat (limited to 'drivers/usb/dwc2/hcd.h')
| -rw-r--r-- | drivers/usb/dwc2/hcd.h | 134 |
1 files changed, 110 insertions, 24 deletions
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 8f0a29cefdf7..89fa26cb25f4 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -75,8 +75,6 @@ struct dwc2_qh; * (micro)frame * @xfer_buf: Pointer to current transfer buffer position * @xfer_dma: DMA address of xfer_buf - * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not - * DWORD aligned * @xfer_len: Total number of bytes to transfer * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer @@ -108,6 +106,7 @@ struct dwc2_qh; * @hc_list_entry: For linking to list of host channels * @desc_list_addr: Current QH's descriptor list DMA address * @desc_list_sz: Current QH's descriptor list size + * @split_order_list_entry: List entry for keeping track of the order of splits * * This structure represents the state of a single host channel when acting in * host mode. It contains the data items needed to transfer packets to an @@ -133,7 +132,6 @@ struct dwc2_host_chan { u8 *xfer_buf; dma_addr_t xfer_dma; - dma_addr_t align_buf; u32 xfer_len; u32 xfer_count; u16 start_pkt_count; @@ -161,6 +159,7 @@ struct dwc2_host_chan { struct list_head hc_list_entry; dma_addr_t desc_list_addr; u32 desc_list_sz; + struct list_head split_order_list_entry; }; struct dwc2_hcd_pipe_info { @@ -213,9 +212,47 @@ enum dwc2_transaction_type { DWC2_TRANSACTION_ALL, }; +/* The number of elements per LS bitmap (per port on multi_tt) */ +#define DWC2_ELEMENTS_PER_LS_BITMAP DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \ + BITS_PER_LONG) + +/** + * struct dwc2_tt - dwc2 data associated with a usb_tt + * + * @refcount: Number of Queue Heads (QHs) holding a reference. + * @usb_tt: Pointer back to the official usb_tt. + * @periodic_bitmaps: Bitmap for which parts of the 1ms frame are accounted + * for already. Each is DWC2_ELEMENTS_PER_LS_BITMAP + * elements (so sizeof(long) times that in bytes). + * + * This structure is stored in the hcpriv of the official usb_tt. + */ +struct dwc2_tt { + int refcount; + struct usb_tt *usb_tt; + unsigned long periodic_bitmaps[]; +}; + +/** + * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus. + * + * @start_schedule_usecs: The start time on the main bus schedule. Note that + * the main bus schedule is tightly packed and this + * time should be interpreted as tightly packed (so + * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us + * instead of 125 us). + * @duration_us: How long this transfer goes. + */ + +struct dwc2_hs_transfer_time { + u32 start_schedule_us; + u16 duration_us; +}; + /** * struct dwc2_qh - Software queue head structure * + * @hsotg: The HCD state structure for the DWC OTG controller * @ep_type: Endpoint type. One of the following values: * - USB_ENDPOINT_XFER_CONTROL * - USB_ENDPOINT_XFER_BULK @@ -236,17 +273,35 @@ enum dwc2_transaction_type { * @do_split: Full/low speed endpoint on high-speed hub requires split * @td_first: Index of first activated isochronous transfer descriptor * @td_last: Index of last activated isochronous transfer descriptor - * @usecs: Bandwidth in microseconds per (micro)frame - * @interval: Interval between transfers in (micro)frames - * @sched_frame: (Micro)frame to initialize a periodic transfer. - * The transfer executes in the following (micro)frame. - * @frame_usecs: Internal variable used by the microframe scheduler - * @start_split_frame: (Micro)frame at which last start split was initialized + * @host_us: Bandwidth in microseconds per transfer as seen by host + * @device_us: Bandwidth in microseconds per transfer as seen by device + * @host_interval: Interval between transfers as seen by the host. If + * the host is high speed and the device is low speed this + * will be 8 times device interval. + * @device_interval: Interval between transfers as seen by the device. + * interval. + * @next_active_frame: (Micro)frame _before_ we next need to put something on + * the bus. We'll move the qh to active here. If the + * host is in high speed mode this will be a uframe. If + * the host is in low speed mode this will be a full frame. + * @start_active_frame: If we are partway through a split transfer, this will be + * what next_active_frame was when we started. Otherwise + * it should always be the same as next_active_frame. + * @num_hs_transfers: Number of transfers in hs_transfers. + * Normally this is 1 but can be more than one for splits. + * Always >= 1 unless the host is in low/full speed mode. + * @hs_transfers: Transfers that are scheduled as seen by the high speed + * bus. Not used if host is in low or full speed mode (but + * note that it IS USED if the device is low or full speed + * as long as the HOST is in high speed mode). + * @ls_start_schedule_slice: Start time (in slices) on the low speed bus + * schedule that's being used by this device. This + * will be on the periodic_bitmap in a + * "struct dwc2_tt". Not used if this device is high + * speed. Note that this is in "schedule slice" which + * is tightly packed. + * @ls_duration_us: Duration on the low speed bus schedule. * @ntd: Actual number of transfer descriptors in a list - * @dw_align_buf: Used instead of original buffer if its physical address - * is not dword-aligned - * @dw_align_buf_size: Size of dw_align_buf - * @dw_align_buf_dma: DMA address for dw_align_buf * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH * @qh_list_entry: Entry for QH in either the periodic or non-periodic @@ -257,13 +312,20 @@ enum dwc2_transaction_type { * @n_bytes: Xfer Bytes array. Each element corresponds to a transfer * descriptor and indicates original XferSize value for the * descriptor + * @unreserve_timer: Timer for releasing periodic reservation. + * @dwc2_tt: Pointer to our tt info (or NULL if no tt). + * @ttport: Port number within our tt. * @tt_buffer_dirty True if clear_tt_buffer_complete is pending + * @unreserve_pending: True if we planned to unreserve but haven't yet. + * @schedule_low_speed: True if we have a low/full speed component (either the + * host is in low/full speed mode or do_split). * * A Queue Head (QH) holds the static characteristics of an endpoint and * maintains a list of transfers (QTDs) for that endpoint. A QH structure may * be entered in either the non-periodic or periodic schedule. */ struct dwc2_qh { + struct dwc2_hsotg *hsotg; u8 ep_type; u8 ep_is_in; u16 maxp; @@ -273,15 +335,16 @@ struct dwc2_qh { u8 do_split; u8 td_first; u8 td_last; - u16 usecs; - u16 interval; - u16 sched_frame; - u16 frame_usecs[8]; - u16 start_split_frame; + u16 host_us; + u16 device_us; + u16 host_interval; + u16 device_interval; + u16 next_active_frame; + u16 start_active_frame; + s16 num_hs_transfers; + struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES]; + u32 ls_start_schedule_slice; u16 ntd; - u8 *dw_align_buf; - int dw_align_buf_size; - dma_addr_t dw_align_buf_dma; struct list_head qtd_list; struct dwc2_host_chan *channel; struct list_head qh_list_entry; @@ -289,7 +352,12 @@ struct dwc2_qh { dma_addr_t desc_list_dma; u32 desc_list_sz; u32 *n_bytes; + struct timer_list unreserve_timer; + struct dwc2_tt *dwc_tt; + int ttport; unsigned tt_buffer_dirty:1; + unsigned unreserve_pending:1; + unsigned schedule_low_speed:1; }; /** @@ -362,6 +430,8 @@ struct hc_xfer_info { }; #endif +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); + /* Gets the struct usb_hcd that contains a struct dwc2_hsotg */ static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg) { @@ -383,6 +453,12 @@ static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr) dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum)); } +void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); +void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status); +void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); + /* * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they * are read as 1, they won't clear when written back. @@ -456,7 +532,6 @@ extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, /* Schedule Queue Functions */ /* Implemented in hcd_queue.c */ -extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg); extern struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, struct dwc2_hcd_urb *urb, gfp_t mem_flags); @@ -571,6 +646,11 @@ static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc) return (frame + inc) & HFNUM_MAX_FRNUM; } +static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec) +{ + return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM; +} + static inline u16 dwc2_full_frame_num(u16 frame) { return (frame & HFNUM_MAX_FRNUM) >> 3; @@ -648,7 +728,7 @@ static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg, return 0; } - return qh->usecs; + return qh->host_us; } extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, @@ -717,6 +797,12 @@ extern void dwc2_host_start(struct dwc2_hsotg *hsotg); extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg); extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr, int *hub_port); +extern struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, + void *context, gfp_t mem_flags, + int *ttport); + +extern void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, + struct dwc2_tt *dwc_tt); extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context); extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, int status); @@ -739,7 +825,7 @@ do { \ _qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd, \ qtd_list_entry); \ if (usb_pipeint(_qtd_->urb->pipe) && \ - (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \ + (_qh_)->start_active_frame != 0 && !_qtd_->complete_split) { \ _hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM); \ switch (_hfnum_.b.frnum & 0x7) { \ case 7: \ |
