diff options
Diffstat (limited to 'drivers/usb/core/hcd.c')
| -rw-r--r-- | drivers/usb/core/hcd.c | 718 |
1 files changed, 420 insertions, 298 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 42ef1d5f6c8a..3dd997df8505 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -356,10 +356,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) const u8 *bufp = tbuf; int len = 0; int patch_wakeup = 0; - unsigned long flags; - int status = 0; + int status; int n; + might_sleep(); + + spin_lock_irq(&hcd_root_hub_lock); + status = usb_hcd_link_urb_to_ep(hcd, urb); + spin_unlock_irq(&hcd_root_hub_lock); + if (status) + return status; + urb->hcpriv = hcd; /* Indicate it's queued */ + cmd = (struct usb_ctrlrequest *) urb->setup_packet; typeReq = (cmd->bRequestType << 8) | cmd->bRequest; wValue = le16_to_cpu (cmd->wValue); @@ -523,13 +531,18 @@ error: } /* any errors get returned through the urb completion */ - local_irq_save (flags); - spin_lock (&urb->lock); - if (urb->status == -EINPROGRESS) - urb->status = status; - spin_unlock (&urb->lock); - usb_hcd_giveback_urb (hcd, urb); - local_irq_restore (flags); + spin_lock_irq(&hcd_root_hub_lock); + usb_hcd_unlink_urb_from_ep(hcd, urb); + + /* This peculiar use of spinlocks echoes what real HC drivers do. + * Avoiding calls to local_irq_disable/enable makes the code + * RT-friendly. + */ + spin_unlock(&hcd_root_hub_lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&hcd_root_hub_lock); + + spin_unlock_irq(&hcd_root_hub_lock); return 0; } @@ -559,31 +572,23 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) if (length > 0) { /* try to complete the status urb */ - local_irq_save (flags); - spin_lock(&hcd_root_hub_lock); + spin_lock_irqsave(&hcd_root_hub_lock, flags); urb = hcd->status_urb; if (urb) { - spin_lock(&urb->lock); - if (urb->status == -EINPROGRESS) { - hcd->poll_pending = 0; - hcd->status_urb = NULL; - urb->status = 0; - urb->hcpriv = NULL; - urb->actual_length = length; - memcpy(urb->transfer_buffer, buffer, length); - } else /* urb has been unlinked */ - length = 0; - spin_unlock(&urb->lock); - } else - length = 0; - spin_unlock(&hcd_root_hub_lock); + hcd->poll_pending = 0; + hcd->status_urb = NULL; + urb->actual_length = length; + memcpy(urb->transfer_buffer, buffer, length); - /* local irqs are always blocked in completions */ - if (length > 0) - usb_hcd_giveback_urb (hcd, urb); - else + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock(&hcd_root_hub_lock); + usb_hcd_giveback_urb(hcd, urb, 0); + spin_lock(&hcd_root_hub_lock); + } else { + length = 0; hcd->poll_pending = 1; - local_irq_restore (flags); + } + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); } /* The USB 2.0 spec says 256 ms. This is close enough and won't @@ -611,33 +616,35 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) int len = 1 + (urb->dev->maxchild / 8); spin_lock_irqsave (&hcd_root_hub_lock, flags); - if (urb->status != -EINPROGRESS) /* already unlinked */ - retval = urb->status; - else if (hcd->status_urb || urb->transfer_buffer_length < len) { + if (hcd->status_urb || urb->transfer_buffer_length < len) { dev_dbg (hcd->self.controller, "not queuing rh status urb\n"); retval = -EINVAL; - } else { - hcd->status_urb = urb; - urb->hcpriv = hcd; /* indicate it's queued */ + goto done; + } - if (!hcd->uses_new_polling) - mod_timer (&hcd->rh_timer, - (jiffies/(HZ/4) + 1) * (HZ/4)); + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) + goto done; - /* If a status change has already occurred, report it ASAP */ - else if (hcd->poll_pending) - mod_timer (&hcd->rh_timer, jiffies); - retval = 0; - } + hcd->status_urb = urb; + urb->hcpriv = hcd; /* indicate it's queued */ + if (!hcd->uses_new_polling) + mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); + + /* If a status change has already occurred, report it ASAP */ + else if (hcd->poll_pending) + mod_timer(&hcd->rh_timer, jiffies); + retval = 0; + done: spin_unlock_irqrestore (&hcd_root_hub_lock, flags); return retval; } static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb) { - if (usb_pipeint (urb->pipe)) + if (usb_endpoint_xfer_int(&urb->ep->desc)) return rh_queue_status (hcd, urb); - if (usb_pipecontrol (urb->pipe)) + if (usb_endpoint_xfer_control(&urb->ep->desc)) return rh_call_control (hcd, urb); return -EINVAL; } @@ -647,32 +654,96 @@ static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb) /* Unlinks of root-hub control URBs are legal, but they don't do anything * since these URBs always execute synchronously. */ -static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) +static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; + int rc; + + spin_lock_irqsave(&hcd_root_hub_lock, flags); + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto done; - if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */ + if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */ ; /* Do nothing */ } else { /* Status URB */ if (!hcd->uses_new_polling) del_timer (&hcd->rh_timer); - local_irq_save (flags); - spin_lock (&hcd_root_hub_lock); if (urb == hcd->status_urb) { hcd->status_urb = NULL; - urb->hcpriv = NULL; - } else - urb = NULL; /* wasn't fully queued */ - spin_unlock (&hcd_root_hub_lock); - if (urb) - usb_hcd_giveback_urb (hcd, urb); - local_irq_restore (flags); + usb_hcd_unlink_urb_from_ep(hcd, urb); + + spin_unlock(&hcd_root_hub_lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&hcd_root_hub_lock); + } } + done: + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); + return rc; +} - return 0; + + +/* + * Show & store the current value of authorized_default + */ +static ssize_t usb_host_authorized_default_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *usb_hcd; + + if (usb_bus == NULL) /* FIXME: not sure if this case is possible */ + return -ENODEV; + usb_hcd = bus_to_hcd(usb_bus); + return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default); +} + +static ssize_t usb_host_authorized_default_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + unsigned val; + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *usb_hcd; + + if (usb_bus == NULL) /* FIXME: not sure if this case is possible */ + return -ENODEV; + usb_hcd = bus_to_hcd(usb_bus); + result = sscanf(buf, "%u\n", &val); + if (result == 1) { + usb_hcd->authorized_default = val? 1 : 0; + result = size; + } + else + result = -EINVAL; + return result; } +static DEVICE_ATTR(authorized_default, 0644, + usb_host_authorized_default_show, + usb_host_authorized_default_store); + + +/* Group all the USB bus attributes */ +static struct attribute *usb_bus_attrs[] = { + &dev_attr_authorized_default.attr, + NULL, +}; + +static struct attribute_group usb_bus_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = usb_bus_attrs, +}; + + + /*-------------------------------------------------------------------------*/ static struct class *usb_host_class; @@ -726,27 +797,23 @@ static void usb_bus_init (struct usb_bus *bus) */ static int usb_register_bus(struct usb_bus *bus) { + int result = -E2BIG; int busnum; mutex_lock(&usb_bus_list_lock); busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1); - if (busnum < USB_MAXBUS) { - set_bit (busnum, busmap.busmap); - bus->busnum = busnum; - } else { + if (busnum >= USB_MAXBUS) { printk (KERN_ERR "%s: too many buses\n", usbcore_name); - mutex_unlock(&usb_bus_list_lock); - return -E2BIG; + goto error_find_busnum; } - + set_bit (busnum, busmap.busmap); + bus->busnum = busnum; bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0), - bus->controller, "usb_host%d", busnum); - if (IS_ERR(bus->class_dev)) { - clear_bit(busnum, busmap.busmap); - mutex_unlock(&usb_bus_list_lock); - return PTR_ERR(bus->class_dev); - } - + bus->controller, "usb_host%d", + busnum); + result = PTR_ERR(bus->class_dev); + if (IS_ERR(bus->class_dev)) + goto error_create_class_dev; class_set_devdata(bus->class_dev, bus); /* Add it to the local list of buses */ @@ -755,8 +822,15 @@ static int usb_register_bus(struct usb_bus *bus) usb_notify_add_bus(bus); - dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); + dev_info (bus->controller, "new USB bus registered, assigned bus " + "number %d\n", bus->busnum); return 0; + +error_create_class_dev: + clear_bit(busnum, busmap.busmap); +error_find_busnum: + mutex_unlock(&usb_bus_list_lock); + return result; } /** @@ -908,103 +982,145 @@ EXPORT_SYMBOL (usb_calc_bus_time); /*-------------------------------------------------------------------------*/ -static void urb_unlink(struct usb_hcd *hcd, struct urb *urb) +/** + * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being submitted + * + * Host controller drivers should call this routine in their enqueue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for URB + * submission, as well as for endpoint shutdown and for usb_kill_urb. + * + * Returns 0 for no error, otherwise a negative error code (in which case + * the enqueue() method must fail). If no error occurs but enqueue() fails + * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing + * the private spinlock and returning. + */ +int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb) { - unsigned long flags; + int rc = 0; - /* clear all state linking urb to this dev (and hcd) */ - spin_lock_irqsave(&hcd_urb_list_lock, flags); - list_del_init (&urb->urb_list); - spin_unlock_irqrestore(&hcd_urb_list_lock, flags); + spin_lock(&hcd_urb_list_lock); - if (hcd->self.uses_dma && !is_root_hub(urb->dev)) { - if (usb_pipecontrol (urb->pipe) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) - dma_unmap_single (hcd->self.controller, urb->setup_dma, - sizeof (struct usb_ctrlrequest), - DMA_TO_DEVICE); - if (urb->transfer_buffer_length != 0 - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) - dma_unmap_single (hcd->self.controller, - urb->transfer_dma, - urb->transfer_buffer_length, - usb_pipein (urb->pipe) - ? DMA_FROM_DEVICE - : DMA_TO_DEVICE); + /* Check that the URB isn't being killed */ + if (unlikely(urb->reject)) { + rc = -EPERM; + goto done; } -} - -/* may be called in any context with a valid urb->dev usecount - * caller surrenders "ownership" of urb - * expects usb_submit_urb() to have sanity checked and conditioned all - * inputs in the urb - */ -int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) -{ - int status; - struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); - struct usb_host_endpoint *ep; - unsigned long flags; - if (!hcd) - return -ENODEV; + if (unlikely(!urb->ep->enabled)) { + rc = -ENOENT; + goto done; + } - usbmon_urb_submit(&hcd->self, urb); + if (unlikely(!urb->dev->can_submit)) { + rc = -EHOSTUNREACH; + goto done; + } /* - * Atomically queue the urb, first to our records, then to the HCD. - * Access to urb->status is controlled by urb->lock ... changes on - * i/o completion (normal or fault) or unlinking. + * Check the host controller's state and add the URB to the + * endpoint's queue. */ - - // FIXME: verify that quiescing hc works right (RH cleans up) - - spin_lock_irqsave(&hcd_urb_list_lock, flags); - ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (unlikely (!ep)) - status = -ENOENT; - else if (unlikely (urb->reject)) - status = -EPERM; - else switch (hcd->state) { + switch (hcd->state) { case HC_STATE_RUNNING: case HC_STATE_RESUMING: - list_add_tail (&urb->urb_list, &ep->urb_list); - status = 0; + urb->unlinked = 0; + list_add_tail(&urb->urb_list, &urb->ep->urb_list); break; default: - status = -ESHUTDOWN; - break; + rc = -ESHUTDOWN; + goto done; } - spin_unlock_irqrestore(&hcd_urb_list_lock, flags); - if (status) { - INIT_LIST_HEAD (&urb->urb_list); - usbmon_urb_submit_error(&hcd->self, urb, status); - return status; + done: + spin_unlock(&hcd_urb_list_lock); + return rc; +} +EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep); + +/** + * usb_hcd_check_unlink_urb - check whether an URB may be unlinked + * @hcd: host controller to which @urb was submitted + * @urb: URB being checked for unlinkability + * @status: error code to store in @urb if the unlink succeeds + * + * Host controller drivers should call this routine in their dequeue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for making + * sure than an unlink is valid. + * + * Returns 0 for no error, otherwise a negative error code (in which case + * the dequeue() method must fail). The possible error codes are: + * + * -EIDRM: @urb was not submitted or has already completed. + * The completion function may not have been called yet. + * + * -EBUSY: @urb has already been unlinked. + */ +int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct list_head *tmp; + + /* insist the urb is still queued */ + list_for_each(tmp, &urb->ep->urb_list) { + if (tmp == &urb->urb_list) + break; } + if (tmp != &urb->urb_list) + return -EIDRM; - /* increment urb's reference count as part of giving it to the HCD - * (which now controls it). HCD guarantees that it either returns - * an error or calls giveback(), but not both. + /* Any status except -EINPROGRESS means something already started to + * unlink this URB from the hardware. So there's no more work to do. */ - urb = usb_get_urb (urb); - atomic_inc (&urb->use_count); - - if (is_root_hub(urb->dev)) { - /* NOTE: requirement on hub callers (usbfs and the hub - * driver, for now) that URBs' urb->transfer_buffer be - * valid and usb_buffer_{sync,unmap}() not be needed, since - * they could clobber root hub response data. - */ - status = rh_urb_enqueue (hcd, urb); - goto done; + if (urb->unlinked) + return -EBUSY; + urb->unlinked = status; + + /* IRQ setup can easily be broken so that USB controllers + * never get completion IRQs ... maybe even the ones we need to + * finish unlinking the initial failed usb_set_address() + * or device descriptor fetch. + */ + if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) && + !is_root_hub(urb->dev)) { + dev_warn(hcd->self.controller, "Unlink after no-IRQ? " + "Controller is probably using the wrong IRQ.\n"); + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); } - /* lower level hcd code should use *_dma exclusively, + return 0; +} +EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb); + +/** + * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being unlinked + * + * Host controller drivers should call this routine before calling + * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and + * interrupts must be disabled. The actions carried out here are required + * for URB completion. + */ +void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb) +{ + /* clear all state linking urb to this dev (and hcd) */ + spin_lock(&hcd_urb_list_lock); + list_del_init(&urb->urb_list); + spin_unlock(&hcd_urb_list_lock); +} +EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); + +static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + /* Map the URB's buffers for DMA access. + * Lower level HCD code should use *_dma exclusively, * unless it uses pio or talks to another transport. */ - if (hcd->self.uses_dma) { - if (usb_pipecontrol (urb->pipe) + if (hcd->self.uses_dma && !is_root_hub(urb->dev)) { + if (usb_endpoint_xfer_control(&urb->ep->desc) && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) urb->setup_dma = dma_map_single ( hcd->self.controller, @@ -1017,20 +1133,75 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) hcd->self.controller, urb->transfer_buffer, urb->transfer_buffer_length, - usb_pipein (urb->pipe) + usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } +} - status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags); -done: - if (unlikely (status)) { - urb_unlink(hcd, urb); - atomic_dec (&urb->use_count); - if (urb->reject) - wake_up (&usb_kill_urb_queue); +static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + if (hcd->self.uses_dma && !is_root_hub(urb->dev)) { + if (usb_endpoint_xfer_control(&urb->ep->desc) + && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) + dma_unmap_single(hcd->self.controller, urb->setup_dma, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + if (urb->transfer_buffer_length != 0 + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) + dma_unmap_single(hcd->self.controller, + urb->transfer_dma, + urb->transfer_buffer_length, + usb_urb_dir_in(urb) + ? DMA_FROM_DEVICE + : DMA_TO_DEVICE); + } +} + +/*-------------------------------------------------------------------------*/ + +/* may be called in any context with a valid urb->dev usecount + * caller surrenders "ownership" of urb + * expects usb_submit_urb() to have sanity checked and conditioned all + * inputs in the urb + */ +int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) +{ + int status; + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + + /* increment urb's reference count as part of giving it to the HCD + * (which will control it). HCD guarantees that it either returns + * an error or calls giveback(), but not both. + */ + usb_get_urb(urb); + atomic_inc(&urb->use_count); + atomic_inc(&urb->dev->urbnum); + usbmon_urb_submit(&hcd->self, urb); + + /* NOTE requirements on root-hub callers (usbfs and the hub + * driver, for now): URBs' urb->transfer_buffer must be + * valid and usb_buffer_{sync,unmap}() not be needed, since + * they could clobber root hub response data. Also, control + * URBs must be submitted in process context with interrupts + * enabled. + */ + map_urb_for_dma(hcd, urb); + if (is_root_hub(urb->dev)) + status = rh_urb_enqueue(hcd, urb); + else + status = hcd->driver->urb_enqueue(hcd, urb, mem_flags); + + if (unlikely(status)) { usbmon_urb_submit_error(&hcd->self, urb, status); - usb_put_urb (urb); + unmap_urb_for_dma(hcd, urb); + urb->hcpriv = NULL; + INIT_LIST_HEAD(&urb->urb_list); + atomic_dec(&urb->use_count); + atomic_dec(&urb->dev->urbnum); + if (urb->reject) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); } return status; } @@ -1042,24 +1213,19 @@ done: * soon as practical. we've already set up the urb's return status, * but we can't know if the callback completed already. */ -static int -unlink1 (struct usb_hcd *hcd, struct urb *urb) +static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status) { int value; if (is_root_hub(urb->dev)) - value = usb_rh_urb_dequeue (hcd, urb); + value = usb_rh_urb_dequeue(hcd, urb, status); else { /* The only reason an HCD might fail this call is if * it has not yet fully queued the urb to begin with. * Such failures should be harmless. */ - value = hcd->driver->urb_dequeue (hcd, urb); + value = hcd->driver->urb_dequeue(hcd, urb, status); } - - if (value != 0) - dev_dbg (hcd->self.controller, "dequeue %p --> %d\n", - urb, value); return value; } @@ -1071,88 +1237,17 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb) */ int usb_hcd_unlink_urb (struct urb *urb, int status) { - struct usb_host_endpoint *ep; - struct usb_hcd *hcd = NULL; - struct device *sys = NULL; - unsigned long flags; - struct list_head *tmp; - int retval; - - if (!urb) - return -EINVAL; - if (!urb->dev || !urb->dev->bus) - return -ENODEV; - ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) - return -ENODEV; - - /* - * we contend for urb->status with the hcd core, - * which changes it while returning the urb. - * - * Caller guaranteed that the urb pointer hasn't been freed, and - * that it was submitted. But as a rule it can't know whether or - * not it's already been unlinked ... so we respect the reversed - * lock sequence needed for the usb_hcd_giveback_urb() code paths - * (urb lock, then hcd_urb_list_lock) in case some other CPU is now - * unlinking it. - */ - spin_lock_irqsave (&urb->lock, flags); - spin_lock(&hcd_urb_list_lock); + struct usb_hcd *hcd; + int retval; - sys = &urb->dev->dev; hcd = bus_to_hcd(urb->dev->bus); - if (hcd == NULL) { - retval = -ENODEV; - goto done; - } + retval = unlink1(hcd, urb, status); - /* insist the urb is still queued */ - list_for_each(tmp, &ep->urb_list) { - if (tmp == &urb->urb_list) - break; - } - if (tmp != &urb->urb_list) { - retval = -EIDRM; - goto done; - } - - /* Any status except -EINPROGRESS means something already started to - * unlink this URB from the hardware. So there's no more work to do. - */ - if (urb->status != -EINPROGRESS) { - retval = -EBUSY; - goto done; - } - - /* IRQ setup can easily be broken so that USB controllers - * never get completion IRQs ... maybe even the ones we need to - * finish unlinking the initial failed usb_set_address() - * or device descriptor fetch. - */ - if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) && - !is_root_hub(urb->dev)) { - dev_warn (hcd->self.controller, "Unlink after no-IRQ? " - "Controller is probably using the wrong IRQ.\n"); - set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); - } - - urb->status = status; - - spin_unlock(&hcd_urb_list_lock); - spin_unlock_irqrestore (&urb->lock, flags); - - retval = unlink1 (hcd, urb); if (retval == 0) retval = -EINPROGRESS; - return retval; - -done: - spin_unlock(&hcd_urb_list_lock); - spin_unlock_irqrestore (&urb->lock, flags); - if (retval != -EIDRM && sys && sys->driver) - dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval); + else if (retval != -EIDRM && retval != -EBUSY) + dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n", + urb, retval); return retval; } @@ -1162,6 +1257,7 @@ done: * usb_hcd_giveback_urb - return URB from HCD to device driver * @hcd: host controller returning the URB * @urb: urb being returned to the USB device driver. + * @status: completion status code for the URB. * Context: in_interrupt() * * This hands the URB from HCD to its USB device driver, using its @@ -1169,14 +1265,27 @@ done: * (and is done using urb->hcpriv). It also released all HCD locks; * the device driver won't cause problems if it frees, modifies, * or resubmits this URB. + * + * If @urb was unlinked, the value of @status will be overridden by + * @urb->unlinked. Erroneous short transfers are detected in case + * the HCD hasn't checked for them. */ -void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb) +void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) { - urb_unlink(hcd, urb); - usbmon_urb_complete (&hcd->self, urb); + urb->hcpriv = NULL; + if (unlikely(urb->unlinked)) + status = urb->unlinked; + else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length && + !status)) + status = -EREMOTEIO; + + unmap_urb_for_dma(hcd, urb); + usbmon_urb_complete(&hcd->self, urb, status); usb_unanchor_urb(urb); /* pass ownership to the completion handler */ + urb->status = status; urb->complete (urb); atomic_dec (&urb->use_count); if (unlikely (urb->reject)) @@ -1187,78 +1296,61 @@ EXPORT_SYMBOL (usb_hcd_giveback_urb); /*-------------------------------------------------------------------------*/ -/* disables the endpoint: cancels any pending urbs, then synchronizes with - * the hcd to make sure all endpoint state is gone from hardware, and then - * waits until the endpoint's queue is completely drained. use for - * set_configuration, set_interface, driver removal, physical disconnect. - * - * example: a qh stored in ep->hcpriv, holding state related to endpoint - * type, maxpacket size, toggle, halt status, and scheduling. +/* Cancel all URBs pending on this endpoint and wait for the endpoint's + * queue to drain completely. The caller must first insure that no more + * URBs can be submitted for this endpoint. */ -void usb_hcd_endpoint_disable (struct usb_device *udev, +void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep) { struct usb_hcd *hcd; struct urb *urb; + if (!ep) + return; + might_sleep(); hcd = bus_to_hcd(udev->bus); - local_irq_disable (); - /* ep is already gone from udev->ep_{in,out}[]; no more submits */ + /* No more submits can occur */ rescan: - spin_lock(&hcd_urb_list_lock); + spin_lock_irq(&hcd_urb_list_lock); list_for_each_entry (urb, &ep->urb_list, urb_list) { - int tmp; + int is_in; - /* the urb may already have been unlinked */ - if (urb->status != -EINPROGRESS) + if (urb->unlinked) continue; usb_get_urb (urb); + is_in = usb_urb_dir_in(urb); spin_unlock(&hcd_urb_list_lock); - spin_lock (&urb->lock); - tmp = urb->status; - if (tmp == -EINPROGRESS) - urb->status = -ESHUTDOWN; - spin_unlock (&urb->lock); - - /* kick hcd unless it's already returning this */ - if (tmp == -EINPROGRESS) { - tmp = urb->pipe; - unlink1 (hcd, urb); - dev_dbg (hcd->self.controller, - "shutdown urb %p pipe %08x ep%d%s%s\n", - urb, tmp, usb_pipeendpoint (tmp), - (tmp & USB_DIR_IN) ? "in" : "out", - ({ char *s; \ - switch (usb_pipetype (tmp)) { \ - case PIPE_CONTROL: s = ""; break; \ - case PIPE_BULK: s = "-bulk"; break; \ - case PIPE_INTERRUPT: s = "-intr"; break; \ - default: s = "-iso"; break; \ - }; s;})); - } + /* kick hcd */ + unlink1(hcd, urb, -ESHUTDOWN); + dev_dbg (hcd->self.controller, + "shutdown urb %p ep%d%s%s\n", + urb, usb_endpoint_num(&ep->desc), + is_in ? "in" : "out", + ({ char *s; + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + s = ""; break; + case USB_ENDPOINT_XFER_BULK: + s = "-bulk"; break; + case USB_ENDPOINT_XFER_INT: + s = "-intr"; break; + default: + s = "-iso"; break; + }; + s; + })); usb_put_urb (urb); /* list contents may have changed */ goto rescan; } - spin_unlock(&hcd_urb_list_lock); - local_irq_enable (); - - /* synchronize with the hardware, so old configuration state - * clears out immediately (and will be freed). - */ - might_sleep (); - if (hcd->driver->endpoint_disable) - hcd->driver->endpoint_disable (hcd, ep); + spin_unlock_irq(&hcd_urb_list_lock); - /* Wait until the endpoint queue is completely empty. Most HCDs - * will have done this already in their endpoint_disable method, - * but some might not. And there could be root-hub control URBs - * still pending since they aren't affected by the HCDs' - * endpoint_disable methods. - */ + /* Wait until the endpoint queue is completely empty */ while (!list_empty (&ep->urb_list)) { spin_lock_irq(&hcd_urb_list_lock); @@ -1278,6 +1370,25 @@ rescan: } } +/* Disables the endpoint: synchronizes with the hcd to make sure all + * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must + * have been called previously. Use for set_configuration, set_interface, + * driver removal, physical disconnect. + * + * example: a qh stored in ep->hcpriv, holding state related to endpoint + * type, maxpacket size, toggle, halt status, and scheduling. + */ +void usb_hcd_disable_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd; + + might_sleep(); + hcd = bus_to_hcd(udev->bus); + if (hcd->driver->endpoint_disable) + hcd->driver->endpoint_disable(hcd, ep); +} + /*-------------------------------------------------------------------------*/ /* called in any context */ @@ -1525,7 +1636,6 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, hcd->driver = driver; hcd->product_desc = (driver->product_desc) ? driver->product_desc : "USB Host Controller"; - return hcd; } EXPORT_SYMBOL (usb_create_hcd); @@ -1570,6 +1680,7 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_info(hcd->self.controller, "%s\n", hcd->product_desc); + hcd->authorized_default = hcd->wireless? 0 : 1; set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); /* HC is in reset state, but accessible. Now do the one-time init, @@ -1646,10 +1757,20 @@ int usb_add_hcd(struct usb_hcd *hcd, if ((retval = register_root_hub(hcd)) != 0) goto err_register_root_hub; + retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group); + if (retval < 0) { + printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n", + retval); + goto error_create_attr_group; + } if (hcd->uses_new_polling && hcd->poll_rh) usb_hcd_poll_rh_status(hcd); return retval; +error_create_attr_group: + mutex_lock(&usb_bus_list_lock); + usb_disconnect(&hcd->self.root_hub); + mutex_unlock(&usb_bus_list_lock); err_register_root_hub: hcd->driver->stop(hcd); err_hcd_driver_start: @@ -1691,6 +1812,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->wakeup_work); #endif + sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group); mutex_lock(&usb_bus_list_lock); usb_disconnect(&hcd->self.root_hub); mutex_unlock(&usb_bus_list_lock); |
