summaryrefslogtreecommitdiffstats
path: root/drivers/uio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uio')
-rw-r--r--drivers/uio/Kconfig24
-rw-r--r--drivers/uio/Makefile2
-rw-r--r--drivers/uio/uio.c4
-rw-r--r--drivers/uio/uio_netx.c172
-rw-r--r--drivers/uio/uio_smx.c140
5 files changed, 187 insertions, 155 deletions
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955f35ed..1da73ecd9799 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,17 +44,6 @@ config UIO_PDRV_GENIRQ
If you don't know what to do here, say N.
-config UIO_SMX
- tristate "SMX cryptengine UIO interface"
- help
- Userspace IO interface to the Cryptography engine found on the
- Nias Digital SMX boards. These will be available from Q4 2008
- from http://www.niasdigital.com. The userspace part of this
- driver will be released under the GPL at the same time as the
- hardware and will be able to be downloaded from the same site.
-
- If you compile this as a module, it will be called uio_smx.
-
config UIO_AEC
tristate "AEC video timestamp device"
depends on PCI
@@ -74,6 +63,7 @@ config UIO_AEC
config UIO_SERCOS3
tristate "Automata Sercos III PCI card driver"
+ depends on PCI
help
Userspace I/O interface for the Sercos III PCI card from
Automata GmbH. The userspace part of this driver will be
@@ -87,11 +77,21 @@ config UIO_SERCOS3
config UIO_PCI_GENERIC
tristate "Generic driver for PCI 2.3 and PCI Express cards"
depends on PCI
- default n
help
Generic driver that you can bind, dynamically, to any
PCI 2.3 compliant and PCI Express card. It is useful,
primarily, for virtualization scenarios.
If you compile this as a module, it will be called uio_pci_generic.
+config UIO_NETX
+ tristate "Hilscher NetX Card driver"
+ depends on PCI
+ help
+ Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ This driver requires a userspace component that comes with the card
+ or is available from Hilscher (http://www.hilscher.com).
+
+ To compile this driver as a module, choose M here; the module
+ will be called uio_netx.
+
endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e7516729..18fd818c5b97 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_UIO) += uio.o
obj-$(CONFIG_UIO_CIF) += uio_cif.o
obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
-obj-$(CONFIG_UIO_SMX) += uio_smx.o
obj-$(CONFIG_UIO_AEC) += uio_aec.o
obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX) += uio_netx.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367dd28f..4de382acd8f2 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr,
return entry->show(mem, buf);
}
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
.show = map_type_show,
};
@@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr,
return entry->show(port, buf);
}
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
.show = portio_type_show,
};
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 000000000000..afbf0bd55cc9
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER 0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
+#define PCI_SUBDEVICE_ID_NXPCA 0x3335
+
+#define DPM_HOST_INT_EN0 0xfff0
+#define DPM_HOST_INT_STAT0 0xffe0
+
+#define DPM_HOST_INT_MASK 0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN 0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+ void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_EN0;
+ void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_STAT0;
+
+ /* Is one of our interrupts enabled and active ? */
+ if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+ & DPM_HOST_INT_MASK))
+ return IRQ_NONE;
+
+ /* Disable interrupt */
+ iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+ int_enable_reg);
+ return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct uio_info *info;
+ int bar;
+
+ info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ if (pci_enable_device(dev))
+ goto out_free;
+
+ if (pci_request_regions(dev, "netx"))
+ goto out_disable;
+
+ switch (id->device) {
+ case PCI_DEVICE_ID_HILSCHER_NETX:
+ bar = 0;
+ info->name = "netx";
+ break;
+ default:
+ bar = 2;
+ info->name = "netx_plx";
+ }
+
+ /* BAR0 or 2 points to the card's dual port memory */
+ info->mem[0].addr = pci_resource_start(dev, bar);
+ if (!info->mem[0].addr)
+ goto out_release;
+ info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+ pci_resource_len(dev, bar));
+
+ if (!info->mem[0].internal_addr)
+ goto out_release;
+
+ info->mem[0].size = pci_resource_len(dev, bar);
+ info->mem[0].memtype = UIO_MEM_PHYS;
+ info->irq = dev->irq;
+ info->irq_flags = IRQF_SHARED;
+ info->handler = netx_handler;
+ info->version = "0.0.1";
+
+ /* Make sure all interrupts are disabled */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+ if (uio_register_device(&dev->dev, info))
+ goto out_unmap;
+
+ pci_set_drvdata(dev, info);
+ dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+ info->name);
+
+ return 0;
+
+out_unmap:
+ iounmap(info->mem[0].internal_addr);
+out_release:
+ pci_release_regions(dev);
+out_disable:
+ pci_disable_device(dev);
+out_free:
+ kfree(info);
+ return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+ struct uio_info *info = pci_get_drvdata(dev);
+
+ /* Disable all interrupts */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+ uio_unregister_device(info);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ iounmap(info->mem[0].internal_addr);
+
+ kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETX,
+ .subvendor = 0,
+ .subdevice = 0,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXPCA,
+ },
+ { 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+ .name = "netx",
+ .id_table = netx_pci_ids,
+ .probe = netx_pci_probe,
+ .remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+ return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+ pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
deleted file mode 100644
index 44054a650a8a..000000000000
--- a/drivers/uio/uio_smx.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * UIO SMX Cryptengine driver.
- *
- * (C) 2008 Nias Digital P/L <bn@niasdigital.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-
-#define DRV_NAME "smx-ce"
-#define DRV_VERSION "0.03"
-
-#define SMX_CSR 0x00000000
-#define SMX_EnD 0x00000001
-#define SMX_RUN 0x00000002
-#define SMX_DRDY 0x00000004
-#define SMX_ERR 0x00000008
-
-static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
-{
- void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
-
- u32 status = ioread32(csr);
-
- if (!(status & SMX_DRDY))
- return IRQ_NONE;
-
- /* Disable interrupt */
- iowrite32(status & ~SMX_DRDY, csr);
- return IRQ_HANDLED;
-}
-
-static int __devinit smx_ce_probe(struct platform_device *dev)
-{
-
- int ret = -ENODEV;
- struct uio_info *info;
- struct resource *regs;
-
- info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!regs) {
- dev_err(&dev->dev, "No memory resource specified\n");
- goto out_free;
- }
-
- info->mem[0].addr = regs->start;
- if (!info->mem[0].addr) {
- dev_err(&dev->dev, "Invalid memory resource\n");
- goto out_free;
- }
-
- info->mem[0].size = regs->end - regs->start + 1;
- info->mem[0].internal_addr = ioremap(regs->start, info->mem[0].size);
-
- if (!info->mem[0].internal_addr) {
- dev_err(&dev->dev, "Can't remap memory address range\n");
- goto out_free;
- }
-
- info->mem[0].memtype = UIO_MEM_PHYS;
-
- info->name = "smx-ce";
- info->version = "0.03";
-
- info->irq = platform_get_irq(dev, 0);
- if (info->irq < 0) {
- ret = info->irq;
- dev_err(&dev->dev, "No (or invalid) IRQ resource specified\n");
- goto out_unmap;
- }
-
- info->irq_flags = IRQF_SHARED;
- info->handler = smx_handler;
-
- platform_set_drvdata(dev, info);
-
- ret = uio_register_device(&dev->dev, info);
-
- if (ret)
- goto out_unmap;
-
- return 0;
-
-out_unmap:
- iounmap(info->mem[0].internal_addr);
-out_free:
- kfree(info);
-
- return ret;
-}
-
-static int __devexit smx_ce_remove(struct platform_device *dev)
-{
- struct uio_info *info = platform_get_drvdata(dev);
-
- uio_unregister_device(info);
- platform_set_drvdata(dev, NULL);
- iounmap(info->mem[0].internal_addr);
-
- kfree(info);
-
- return 0;
-}
-
-static struct platform_driver smx_ce_driver = {
- .probe = smx_ce_probe,
- .remove = __devexit_p(smx_ce_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init smx_ce_init_module(void)
-{
- return platform_driver_register(&smx_ce_driver);
-}
-module_init(smx_ce_init_module);
-
-static void __exit smx_ce_exit_module(void)
-{
- platform_driver_unregister(&smx_ce_driver);
-}
-module_exit(smx_ce_exit_module);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Ben Nizette <bn@niasdigital.com>");
OpenPOWER on IntegriCloud