diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 425 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.h | 39 |
2 files changed, 206 insertions, 258 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 92c91c83edde..0257fd5ede52 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -47,7 +47,6 @@ #include <linux/clk.h> #include <linux/ctype.h> #include <linux/err.h> -#include <linux/list.h> #include <linux/dmaengine.h> #include <linux/scatterlist.h> #include <linux/slab.h> @@ -65,11 +64,8 @@ struct sci_port { struct uart_port port; - /* Port type */ - unsigned int type; - - /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ - unsigned int irqs[SCIx_NR_IRQS]; + /* Platform configuration */ + struct plat_sci_port *cfg; /* Port enable callback */ void (*enable)(struct uart_port *port); @@ -81,26 +77,15 @@ struct sci_port { struct timer_list break_timer; int break_flag; - /* SCSCR initialization */ - unsigned int scscr; - - /* SCBRR calculation algo */ - unsigned int scbrr_algo_id; - /* Interface clock */ struct clk *iclk; /* Function clock */ struct clk *fclk; - struct list_head node; - struct dma_chan *chan_tx; struct dma_chan *chan_rx; #ifdef CONFIG_SERIAL_SH_SCI_DMA - struct device *dma_dev; - unsigned int slave_tx; - unsigned int slave_rx; struct dma_async_tx_descriptor *desc_tx; struct dma_async_tx_descriptor *desc_rx[2]; dma_cookie_t cookie_tx; @@ -117,16 +102,14 @@ struct sci_port { struct timer_list rx_timer; unsigned int rx_timeout; #endif -}; -struct sh_sci_priv { - spinlock_t lock; - struct list_head ports; - struct notifier_block clk_nb; + struct notifier_block freq_transition; }; /* Function prototypes */ +static void sci_start_tx(struct uart_port *port); static void sci_stop_tx(struct uart_port *port); +static void sci_start_rx(struct uart_port *port); #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS @@ -142,12 +125,6 @@ to_sci_port(struct uart_port *uart) #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL -static inline void handle_error(struct uart_port *port) -{ - /* Clear error flags */ - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); -} - static int sci_poll_get_char(struct uart_port *port) { unsigned short status; @@ -156,7 +133,7 @@ static int sci_poll_get_char(struct uart_port *port) do { status = sci_in(port, SCxSR); if (status & SCxSR_ERRORS(port)) { - handle_error(port); + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); continue; } break; @@ -475,7 +452,7 @@ static void sci_transmit_chars(struct uart_port *port) /* On SH3, SCIF may read end-of-break as a space->mark char */ #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) -static inline void sci_receive_chars(struct uart_port *port) +static void sci_receive_chars(struct uart_port *port) { struct sci_port *sci_port = to_sci_port(port); struct tty_struct *tty = port->state->port.tty; @@ -566,18 +543,20 @@ static inline void sci_receive_chars(struct uart_port *port) } #define SCI_BREAK_JIFFIES (HZ/20) -/* The sci generates interrupts during the break, + +/* + * The sci generates interrupts during the break, * 1 per millisecond or so during the break period, for 9600 baud. * So dont bother disabling interrupts. * But dont want more than 1 break event. * Use a kernel timer to periodically poll the rx line until * the break is finished. */ -static void sci_schedule_break_timer(struct sci_port *port) +static inline void sci_schedule_break_timer(struct sci_port *port) { - port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; - add_timer(&port->break_timer); + mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES); } + /* Ensure that two consecutive samples find the break over. */ static void sci_break_timer(unsigned long data) { @@ -594,7 +573,7 @@ static void sci_break_timer(unsigned long data) port->break_flag = 0; } -static inline int sci_handle_errors(struct uart_port *port) +static int sci_handle_errors(struct uart_port *port) { int copied = 0; unsigned short status = sci_in(port, SCxSR); @@ -650,7 +629,7 @@ static inline int sci_handle_errors(struct uart_port *port) return copied; } -static inline int sci_handle_fifo_overrun(struct uart_port *port) +static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; int copied = 0; @@ -671,7 +650,7 @@ static inline int sci_handle_fifo_overrun(struct uart_port *port) return copied; } -static inline int sci_handle_breaks(struct uart_port *port) +static int sci_handle_breaks(struct uart_port *port) { int copied = 0; unsigned short status = sci_in(port, SCxSR); @@ -794,7 +773,7 @@ static inline unsigned long port_rx_irq_mask(struct uart_port *port) * it's unset, it's logically inferred that there's no point in * testing for it. */ - return SCSCR_RIE | (to_sci_port(port)->scscr & SCSCR_REIE); + return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); } static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) @@ -839,17 +818,18 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) { - struct sh_sci_priv *priv = container_of(self, - struct sh_sci_priv, clk_nb); struct sci_port *sci_port; unsigned long flags; + sci_port = container_of(self, struct sci_port, freq_transition); + if ((phase == CPUFREQ_POSTCHANGE) || (phase == CPUFREQ_RESUMECHANGE)) { - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - spin_unlock_irqrestore(&priv->lock, flags); + struct uart_port *port = &sci_port->port; + + spin_lock_irqsave(&port->lock, flags); + port->uartclk = clk_get_rate(sci_port->iclk); + spin_unlock_irqrestore(&port->lock, flags); } return NOTIFY_OK; @@ -882,21 +862,21 @@ static int sci_request_irq(struct sci_port *port) const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", "SCI Transmit Data Empty", "SCI Break" }; - if (port->irqs[0] == port->irqs[1]) { - if (unlikely(!port->irqs[0])) + if (port->cfg->irqs[0] == port->cfg->irqs[1]) { + if (unlikely(!port->cfg->irqs[0])) return -ENODEV; - if (request_irq(port->irqs[0], sci_mpxed_interrupt, + if (request_irq(port->cfg->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED, "sci", port)) { dev_err(port->port.dev, "Can't allocate IRQ\n"); return -ENODEV; } } else { for (i = 0; i < ARRAY_SIZE(handlers); i++) { - if (unlikely(!port->irqs[i])) + if (unlikely(!port->cfg->irqs[i])) continue; - if (request_irq(port->irqs[i], handlers[i], + if (request_irq(port->cfg->irqs[i], handlers[i], IRQF_DISABLED, desc[i], port)) { dev_err(port->port.dev, "Can't allocate IRQ\n"); return -ENODEV; @@ -911,14 +891,14 @@ static void sci_free_irq(struct sci_port *port) { int i; - if (port->irqs[0] == port->irqs[1]) - free_irq(port->irqs[0], port); + if (port->cfg->irqs[0] == port->cfg->irqs[1]) + free_irq(port->cfg->irqs[0], port); else { - for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { - if (!port->irqs[i]) + for (i = 0; i < ARRAY_SIZE(port->cfg->irqs); i++) { + if (!port->cfg->irqs[i]) continue; - free_irq(port->irqs[i], port); + free_irq(port->cfg->irqs[i], port); } } } @@ -1037,9 +1017,6 @@ static void sci_dma_rx_complete(void *arg) schedule_work(&s->work_rx); } -static void sci_start_rx(struct uart_port *port); -static void sci_start_tx(struct uart_port *port); - static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) { struct dma_chan *chan = s->chan_rx; @@ -1325,7 +1302,7 @@ static void rx_timer_fn(unsigned long arg) if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { scr &= ~0x4000; - enable_irq(s->irqs[1]); + enable_irq(s->cfg->irqs[1]); } sci_out(port, SCSCR, scr | SCSCR_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); @@ -1341,9 +1318,9 @@ static void sci_request_dma(struct uart_port *port) int nent; dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, - port->line, s->dma_dev); + port->line, s->cfg->dma_dev); - if (!s->dma_dev) + if (!s->cfg->dma_dev) return; dma_cap_zero(mask); @@ -1352,8 +1329,8 @@ static void sci_request_dma(struct uart_port *port) param = &s->param_tx; /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ - param->slave_id = s->slave_tx; - param->dma_dev = s->dma_dev; + param->slave_id = s->cfg->dma_slave_tx; + param->dma_dev = s->cfg->dma_dev; s->cookie_tx = -EINVAL; chan = dma_request_channel(mask, filter, param); @@ -1381,8 +1358,8 @@ static void sci_request_dma(struct uart_port *port) param = &s->param_rx; /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ - param->slave_id = s->slave_rx; - param->dma_dev = s->dma_dev; + param->slave_id = s->cfg->dma_slave_rx; + param->dma_dev = s->cfg->dma_dev; chan = dma_request_channel(mask, filter, param); dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); @@ -1427,7 +1404,7 @@ static void sci_free_dma(struct uart_port *port) { struct sci_port *s = to_sci_port(port); - if (!s->dma_dev) + if (!s->cfg->dma_dev) return; if (s->chan_tx) @@ -1435,21 +1412,32 @@ static void sci_free_dma(struct uart_port *port) if (s->chan_rx) sci_rx_dma_release(s, false); } +#else +static inline void sci_request_dma(struct uart_port *port) +{ +} + +static inline void sci_free_dma(struct uart_port *port) +{ +} #endif static int sci_startup(struct uart_port *port) { struct sci_port *s = to_sci_port(port); + int ret; dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); if (s->enable) s->enable(port); - sci_request_irq(s); -#ifdef CONFIG_SERIAL_SH_SCI_DMA + ret = sci_request_irq(s); + if (unlikely(ret < 0)) + return ret; + sci_request_dma(port); -#endif + sci_start_tx(port); sci_start_rx(port); @@ -1464,9 +1452,8 @@ static void sci_shutdown(struct uart_port *port) sci_stop_rx(port); sci_stop_tx(port); -#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_free_dma(port); -#endif sci_free_irq(s); if (s->disable) @@ -1491,6 +1478,7 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, /* Warn, but use a safe default */ WARN_ON(1); + return ((freq + 16 * bps) / (32 * bps) - 1); } @@ -1514,7 +1502,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, max_baud); if (likely(baud && port->uartclk)) - t = sci_scbrr_calc(s->scbrr_algo_id, baud, port->uartclk); + t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk); do { status = sci_in(port, SCxSR); @@ -1526,6 +1514,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; + if ((termios->c_cflag & CSIZE) == CS7) smr_val |= 0x40; if (termios->c_cflag & PARENB) @@ -1540,7 +1529,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSMR, smr_val); dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, - s->scscr); + s->cfg->scscr); if (t > 0) { if (t >= 256) { @@ -1556,7 +1545,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_init_pins(port, termios->c_cflag); sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); - sci_out(port, SCSCR, s->scscr); + sci_out(port, SCSCR, s->cfg->scscr); #ifdef CONFIG_SERIAL_SH_SCI_DMA /* @@ -1602,31 +1591,33 @@ static const char *sci_type(struct uart_port *port) return NULL; } -static void sci_release_port(struct uart_port *port) +static inline unsigned long sci_port_size(struct uart_port *port) { - /* Nothing here yet .. */ -} - -static int sci_request_port(struct uart_port *port) -{ - /* Nothing here yet .. */ - return 0; + /* + * Pick an arbitrary size that encapsulates all of the base + * registers by default. This can be optimized later, or derived + * from platform resource data at such a time that ports begin to + * behave more erratically. + */ + return 64; } -static void sci_config_port(struct uart_port *port, int flags) +static int sci_remap_port(struct uart_port *port) { - struct sci_port *s = to_sci_port(port); - - port->type = s->type; + unsigned long size = sci_port_size(port); + /* + * Nothing to do if there's already an established membase. + */ if (port->membase) - return; + return 0; if (port->flags & UPF_IOREMAP) { - port->membase = ioremap_nocache(port->mapbase, 0x40); - - if (IS_ERR(port->membase)) + port->membase = ioremap_nocache(port->mapbase, size); + if (unlikely(!port->membase)) { dev_err(port->dev, "can't remap port#%d\n", port->line); + return -ENXIO; + } } else { /* * For the simple (and majority of) cases where we don't @@ -1635,13 +1626,54 @@ static void sci_config_port(struct uart_port *port, int flags) */ port->membase = (void __iomem *)port->mapbase; } + + return 0; +} + +static void sci_release_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sci_port_size(port)); +} + +static int sci_request_port(struct uart_port *port) +{ + unsigned long size = sci_port_size(port); + struct resource *res; + int ret; + + res = request_mem_region(port->mapbase, size, dev_name(port->dev)); + if (unlikely(res == NULL)) + return -EBUSY; + + ret = sci_remap_port(port); + if (unlikely(ret != 0)) { + release_resource(res); + return ret; + } + + return 0; +} + +static void sci_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + struct sci_port *sport = to_sci_port(port); + + port->type = sport->cfg->type; + sci_request_port(port); + } } static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) { struct sci_port *s = to_sci_port(port); - if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) + if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) return -EINVAL; if (ser->baud_base < 2400) /* No paper tape reader for Mitch.. */ @@ -1726,36 +1758,29 @@ static int __devinit sci_init_single(struct platform_device *dev, sci_port->break_timer.function = sci_break_timer; init_timer(&sci_port->break_timer); - port->mapbase = p->mapbase; - port->membase = p->membase; + sci_port->cfg = p; - port->irq = p->irqs[SCIx_TXI_IRQ]; + port->mapbase = p->mapbase; + port->type = p->type; port->flags = p->flags; - sci_port->type = port->type = p->type; - sci_port->scscr = p->scscr; - sci_port->scbrr_algo_id = p->scbrr_algo_id; -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_port->dma_dev = p->dma_dev; - sci_port->slave_tx = p->dma_slave_tx; - sci_port->slave_rx = p->dma_slave_rx; + /* + * The UART port needs an IRQ value, so we peg this to the TX IRQ + * for the multi-IRQ ports, which is where we are primarily + * concerned with the shutdown path synchronization. + * + * For the muxed case there's nothing more to do. + */ + port->irq = p->irqs[SCIx_TXI_IRQ]; - dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, - p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); -#endif + if (p->dma_dev) + dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n", + p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); - memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static struct tty_driver *serial_console_device(struct console *co, int *index) -{ - struct uart_driver *p = &sci_uart_driver; - *index = co->index; - return p->tty_driver; -} - static void serial_console_putchar(struct uart_port *port, int ch) { sci_poll_put_char(port, ch); @@ -1768,8 +1793,8 @@ static void serial_console_putchar(struct uart_port *port, int ch) static void serial_console_write(struct console *co, const char *s, unsigned count) { - struct uart_port *port = co->data; - struct sci_port *sci_port = to_sci_port(port); + struct sci_port *sci_port = &sci_ports[co->index]; + struct uart_port *port = &sci_port->port; unsigned short bits; if (sci_port->enable) @@ -1797,32 +1822,17 @@ static int __devinit serial_console_setup(struct console *co, char *options) int ret; /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= SCI_NPORTS) - co->index = 0; - - if (co->data) { - port = co->data; - sci_port = to_sci_port(port); - } else { - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; - } - - /* - * Also need to check port->type, we don't actually have any - * UPIO_PORT ports, but uart_report_port() handily misreports - * it anyways if we don't have a port available by the time this is - * called. + * Refuse to handle any bogus ports. */ - if (!port->type) + if (co->index < 0 || co->index >= SCI_NPORTS) return -ENODEV; - sci_config_port(port, 0); + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + + ret = sci_remap_port(port); + if (unlikely(ret != 0)) + return ret; if (sci_port->enable) sci_port->enable(port); @@ -1842,11 +1852,12 @@ static int __devinit serial_console_setup(struct console *co, char *options) static struct console serial_console = { .name = "ttySC", - .device = serial_console_device, + .device = uart_console_device, .write = serial_console_write, .setup = serial_console_setup, .flags = CON_PRINTBUFFER, .index = -1, + .data = &sci_uart_driver, }; static int __init sci_console_init(void) @@ -1856,14 +1867,39 @@ static int __init sci_console_init(void) } console_initcall(sci_console_init); -static struct sci_port early_serial_port; static struct console early_serial_console = { .name = "early_ttySC", .write = serial_console_write, .flags = CON_PRINTBUFFER, + .index = -1, }; + static char early_serial_buf[32]; +static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) +{ + struct plat_sci_port *cfg = pdev->dev.platform_data; + + if (early_serial_console.data) + return -EEXIST; + + early_serial_console.index = pdev->id; + + sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); + + serial_console_setup(&early_serial_console, early_serial_buf); + + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + + register_console(&early_serial_console); + return 0; +} +#else +static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) +{ + return -EINVAL; +} #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) @@ -1885,24 +1921,18 @@ static struct uart_driver sci_uart_driver = { .cons = SCI_CONSOLE, }; - static int sci_remove(struct platform_device *dev) { - struct sh_sci_priv *priv = platform_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; + struct sci_port *port = platform_get_drvdata(dev); - cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) { - uart_remove_one_port(&sci_uart_driver, &p->port); - clk_put(p->iclk); - clk_put(p->fclk); - } - spin_unlock_irqrestore(&priv->lock, flags); + uart_remove_one_port(&sci_uart_driver, &port->port); + + clk_put(port->iclk); + clk_put(port->fclk); - kfree(priv); return 0; } @@ -1911,8 +1941,6 @@ static int __devinit sci_probe_single(struct platform_device *dev, struct plat_sci_port *p, struct sci_port *sciport) { - struct sh_sci_priv *priv = platform_get_drvdata(dev); - unsigned long flags; int ret; /* Sanity check */ @@ -1929,68 +1957,35 @@ static int __devinit sci_probe_single(struct platform_device *dev, if (ret) return ret; - ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - if (ret) - return ret; - - INIT_LIST_HEAD(&sciport->node); - - spin_lock_irqsave(&priv->lock, flags); - list_add(&sciport->node, &priv->ports); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; + return uart_add_one_port(&sci_uart_driver, &sciport->port); } -/* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need - * remapping (such as sh64) should also set UPF_IOREMAP. - */ static int __devinit sci_probe(struct platform_device *dev) { struct plat_sci_port *p = dev->dev.platform_data; - struct sh_sci_priv *priv; - int i, ret = -EINVAL; + struct sci_port *sp = &sci_ports[dev->id]; + int ret; -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE - if (is_early_platform_device(dev)) { - if (dev->id == -1) - return -ENOTSUPP; - early_serial_console.index = dev->id; - early_serial_console.data = &early_serial_port.port; - sci_init_single(NULL, &early_serial_port, dev->id, p); - serial_console_setup(&early_serial_console, early_serial_buf); - if (!strstr(early_serial_buf, "keep")) - early_serial_console.flags |= CON_BOOT; - register_console(&early_serial_console); - return 0; - } -#endif + /* + * If we've come here via earlyprintk initialization, head off to + * the special early probe. We don't have sufficient device state + * to make it beyond this yet. + */ + if (is_early_platform_device(dev)) + return sci_probe_earlyprintk(dev); - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; + platform_set_drvdata(dev, sp); - INIT_LIST_HEAD(&priv->ports); - spin_lock_init(&priv->lock); - platform_set_drvdata(dev, priv); + ret = sci_probe_single(dev, dev->id, p, sp); + if (ret) + goto err_unreg; - priv->clk_nb.notifier_call = sci_notifier; - cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + sp->freq_transition.notifier_call = sci_notifier; - if (dev->id != -1) { - ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); - if (ret) - goto err_unreg; - } else { - for (i = 0; p && p->flags != 0; p++, i++) { - ret = sci_probe_single(dev, i, p, &sci_ports[i]); - if (ret) - goto err_unreg; - } - } + ret = cpufreq_register_notifier(&sp->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); + if (unlikely(ret < 0)) + goto err_unreg; #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); @@ -2005,28 +2000,20 @@ err_unreg: static int sci_suspend(struct device *dev) { - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; + struct sci_port *sport = dev_get_drvdata(dev); - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_suspend_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); + if (sport) + uart_suspend_port(&sci_uart_driver, &sport->port); return 0; } static int sci_resume(struct device *dev) { - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; + struct sci_port *sport = dev_get_drvdata(dev); - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_resume_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); + if (sport) + uart_resume_port(&sci_uart_driver, &sport->port); return 0; } diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index b223d6cbf33a..5fefed53fa42 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -54,9 +54,6 @@ # define PBCR 0xa4050102 #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10010 /* 16 bit SCIF */ -# define SCSPTR2 0xffe20010 /* 16 bit SCIF */ -# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e @@ -69,77 +66,42 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 -# define SCSPTR1 0xa405013e -# define SCSPTR2 0xa4050160 -# define SCSPTR3 0xa405013e -# define SCSPTR4 0xa4050128 -# define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7724) # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -# define SCIF_PTR2_OFFS 0x0000020 -# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 -# define SCSPTR1 0xfe4b0020 -# define SCSPTR2 0xfe4b0020 # define SCIF_ORER 0x0001 -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ -# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ -# define SCSPTR1 0xff924020 /* 16 bit SCIF */ -# define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ -# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ -# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ -# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ -# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ defined(CONFIG_CPU_SUBTYPE_SH7263) # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ -# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ -# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ -# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ -# if defined(CONFIG_CPU_SUBTYPE_SH7201) -# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */ -# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */ -# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ -# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ -# endif #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -# define SCSPTR1 0xf8410020 /* 16 bit SCIF */ -# define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ -# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ -# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ #else # error CPU subtype not defined @@ -411,7 +373,6 @@ SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) -SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) |
