diff options
Diffstat (limited to 'drivers/tty/serial/sh-sci.c')
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 564 |
1 files changed, 345 insertions, 219 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ebd8629c108d..8e55e0a2733a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -54,10 +54,6 @@ #include <asm/sh_bios.h> #endif -#ifdef CONFIG_H8300 -#include <asm/gpio.h> -#endif - #include "sh-sci.h" struct sci_port { @@ -121,6 +117,255 @@ to_sci_port(struct uart_port *uart) return container_of(uart, struct sci_port, port); } +struct plat_sci_reg { + u8 offset, size; +}; + +/* Helper for invalidating specific entries of an inherited map. */ +#define sci_reg_invalid { .offset = 0, .size = 0 } + +static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { + [SCIx_PROBE_REGTYPE] = { + [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, + }, + + /* + * Common SCI definitions, dependent on the port's regshift + * value. + */ + [SCIx_SCI_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = sci_reg_invalid, + [SCFDR] = sci_reg_invalid, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common definitions for legacy IrDA ports, dependent on + * regshift value. + */ + [SCIx_IRDA_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = { 0x06, 8 }, + [SCFDR] = { 0x07, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFA definitions. + */ + [SCIx_SCIFA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFB definitions. + */ + [SCIx_SCIFB_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x40, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x60, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-3 SCIF definitions. + */ + [SCIx_SH3_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-4(A) SCIF(B) definitions. + */ + [SCIx_SH4_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR + * register. + */ + [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ + [SCRFDR] = { 0x20, 16 }, + [SCSPTR] = { 0x24, 16 }, + [SCLSR] = { 0x28, 16 }, + }, + + /* + * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR + * registers. + */ + [SCIx_SH7705_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, +}; + +#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) + +/* + * The "offset" here is rather misleading, in that it refers to an enum + * value relative to the port mapping rather than the fixed offset + * itself, which needs to be manually retrieved from the platform's + * register map for the given port. + */ +static unsigned int sci_serial_in(struct uart_port *p, int offset) +{ + struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + return ioread8(p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + return ioread16(p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); + + return 0; +} + +static void sci_serial_out(struct uart_port *p, int offset, int value) +{ + struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + iowrite8(value, p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + iowrite16(value, p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); +} + +#define sci_in(up, offset) (up->serial_in(up, offset)) +#define sci_out(up, offset, value) (up->serial_out(up, offset, value)) + +static int sci_probe_regmap(struct plat_sci_port *cfg) +{ + switch (cfg->type) { + case PORT_SCI: + cfg->regtype = SCIx_SCI_REGTYPE; + break; + case PORT_IRDA: + cfg->regtype = SCIx_IRDA_REGTYPE; + break; + case PORT_SCIFA: + cfg->regtype = SCIx_SCIFA_REGTYPE; + break; + case PORT_SCIFB: + cfg->regtype = SCIx_SCIFB_REGTYPE; + break; + case PORT_SCIF: + /* + * The SH-4 is a bit of a misnomer here, although that's + * where this particular port layout originated. This + * configuration (or some slight variation thereof) + * remains the dominant model for all SCIFs. + */ + cfg->regtype = SCIx_SH4_SCIF_REGTYPE; + break; + default: + printk(KERN_ERR "Can't probe register map for given port\n"); + return -EINVAL; + } + + return 0; +} + #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL @@ -164,223 +409,76 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ -#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins(struct uart_port *port, unsigned int cflag) { - int ch = (port->mapbase - SMR0) >> 3; - - /* set DDR regs */ - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].rx, - H8300_GPIO_INPUT); - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].tx, - H8300_GPIO_OUTPUT); - - /* tx mark output*/ - H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (port->mapbase == 0xA4400000) { - __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); - __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); - } else if (port->mapbase == 0xA4410000) - __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (cflag & CRTSCTS) { - /* enable RTS/CTS */ - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 9-2; enable all scif pins but sck */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xfc03), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 9-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xfc03), PORT_PVCR); - } - } else { - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 5-2; enable only tx and rx */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xffc3), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 5-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xffc3), PORT_PVCR); - } - } -} -#elif defined(CONFIG_CPU_SH3) -/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ - __raw_writew(data & 0x0fcf, SCPCR); - - if (!(cflag & CRTSCTS)) { - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP4MD1,0, - Set SCP6MD1,0 = {01} (output) */ - __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; - data = __raw_readb(SCPDR); - /* Set /RTS2 (bit6) = 0 */ - __raw_writeb(data & 0xbf, SCPDR); + /* + * Use port-specific handler if provided. + */ + if (s->cfg->ops && s->cfg->ops->init_pins) { + s->cfg->ops->init_pins(port, cflag); + return; } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - if (port->mapbase == 0xffe00000) { - data = __raw_readw(PSCR); - data &= ~0x03cf; - if (!(cflag & CRTSCTS)) - data |= 0x0340; + /* + * For the generic path SCSPTR is necessary. Bail out if that's + * unavailable, too. + */ + if (!reg->size) + return; - __raw_writew(data, PSCR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ + sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ } -#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ -} -#else -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - /* Nothing to do */ -} -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCTFDR) & 0xff; -} - -static int scif_txroom(struct uart_port *port) +static int sci_txfill(struct uart_port *port) { - return SCIF_TXROOM_MAX - scif_txfill(port); -} + struct plat_sci_reg *reg; -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCRFDR) & 0xff; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static int scif_txfill(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ + reg = sci_getreg(port, SCTFDR); + if (reg->size) return sci_in(port, SCTFDR) & 0xff; - else - /* SCIF2 */ + + reg = sci_getreg(port, SCFDR); + if (reg->size) return sci_in(port, SCFDR) >> 8; -} -static int scif_txroom(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return SCIF_TXROOM_MAX - scif_txfill(port); - else - /* SCIF2 */ - return SCIF2_TXROOM_MAX - scif_txfill(port); + return !(sci_in(port, SCxSR) & SCI_TDRE); } -static int scif_rxfill(struct uart_port *port) -{ - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { - /* SCIF0/1*/ - return sci_in(port, SCRFDR) & 0xff; - } else { - /* SCIF2 */ - return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; - } -} -#elif defined(CONFIG_ARCH_SH7372) -static int scif_txfill(struct uart_port *port) +static int sci_txroom(struct uart_port *port) { - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) >> 8; - else - return sci_in(port, SCTFDR); + return port->fifosize - sci_txfill(port); } -static int scif_txroom(struct uart_port *port) +static int sci_rxfill(struct uart_port *port) { - return port->fifosize - scif_txfill(port); -} + struct plat_sci_reg *reg; -static int scif_rxfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; - else - return sci_in(port, SCRFDR); -} -#else -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) >> 8; -} + reg = sci_getreg(port, SCRFDR); + if (reg->size) + return sci_in(port, SCRFDR) & 0xff; -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} + reg = sci_getreg(port, SCFDR); + if (reg->size) + return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1); -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; + return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } -#endif -static int sci_txfill(struct uart_port *port) +/* + * SCI helper for checking the state of the muxed port/RXD pins. + */ +static inline int sci_rxd_in(struct uart_port *port) { - return !(sci_in(port, SCxSR) & SCI_TDRE); -} + struct sci_port *s = to_sci_port(port); -static int sci_txroom(struct uart_port *port) -{ - return !sci_txfill(port); -} + if (s->cfg->port_reg <= 0) + return 1; -static int sci_rxfill(struct uart_port *port) -{ - return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; + return !!__raw_readb(s->cfg->port_reg); } /* ********************************************************************** * @@ -406,10 +504,7 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCI) - count = sci_txroom(port); - else - count = scif_txroom(port); + count = sci_txroom(port); do { unsigned char c; @@ -464,13 +559,8 @@ static void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCI) - count = sci_rxfill(port); - else - count = scif_rxfill(port); - /* Don't copy more bytes than there is room for in the buffer */ - count = tty_buffer_request_room(tty, count); + count = tty_buffer_request_room(tty, sci_rxfill(port)); /* If for any reason we can't copy more data, we're done! */ if (count == 0) @@ -583,13 +673,19 @@ static int sci_handle_errors(struct uart_port *port) int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); - if (status & SCxSR_ORER(port)) { - /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) - copied++; + /* + * Handle overruns, if supported. + */ + if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { + if (status & (1 << s->cfg->overrun_bit)) { + /* overrun error */ + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + copied++; - dev_notice(port->dev, "overrun error"); + dev_notice(port->dev, "overrun error"); + } } if (status & SCxSR_FER(port)) { @@ -637,12 +733,15 @@ static int sci_handle_errors(struct uart_port *port) static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg; int copied = 0; - if (port->type != PORT_SCIF) + reg = sci_getreg(port, SCLSR); + if (!reg->size) return 0; - if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { sci_out(port, SCLSR, 0); tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -915,7 +1014,7 @@ static void sci_free_irq(struct sci_port *port) static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = sci_in(port, SCxSR); - unsigned short in_tx_fifo = scif_txfill(port); + unsigned short in_tx_fifo = sci_txfill(port); return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; } @@ -1746,6 +1845,9 @@ static int __devinit sci_init_single(struct platform_device *dev, break; } + if (p->regtype == SCIx_PROBE_REGTYPE) + BUG_ON(sci_probe_regmap(p) != 0); + if (dev) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { @@ -1775,14 +1877,41 @@ static int __devinit sci_init_single(struct platform_device *dev, sci_port->break_timer.function = sci_break_timer; init_timer(&sci_port->break_timer); + /* + * Establish some sensible defaults for the error detection. + */ + if (!p->error_mask) + p->error_mask = (p->type == PORT_SCI) ? + SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; + + /* + * Establish sensible defaults for the overrun detection, unless + * the part has explicitly disabled support for it. + */ + if (p->overrun_bit != SCIx_NOT_SUPPORTED) { + if (p->type == PORT_SCI) + p->overrun_bit = 5; + else if (p->scbrr_algo_id == SCBRR_ALGO_4) + p->overrun_bit = 9; + else + p->overrun_bit = 0; + + /* + * Make the error mask inclusive of overrun detection, if + * supported. + */ + p->error_mask |= (1 << p->overrun_bit); + } + sci_port->cfg = p; port->mapbase = p->mapbase; port->type = p->type; port->flags = p->flags; + port->regshift = p->regshift; /* - * The UART port needs an IRQ value, so we peg this to the TX IRQ + * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily * concerned with the shutdown path synchronization. * @@ -1790,6 +1919,9 @@ static int __devinit sci_init_single(struct platform_device *dev, */ port->irq = p->irqs[SCIx_RXI_IRQ]; + port->serial_in = sci_serial_in; + port->serial_out = sci_serial_out; + if (p->dma_dev) dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n", p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); @@ -1863,14 +1995,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - ret = uart_set_options(port, co, baud, parity, bits, flow); -#if defined(__H8300H__) || defined(__H8300S__) - /* disable rx interrupt */ - if (ret == 0) - sci_stop_rx(port); -#endif /* TODO: disable clock */ - return ret; + return uart_set_options(port, co, baud, parity, bits, flow); } static struct console serial_console = { |
