1 files changed, 104 insertions, 93 deletions

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 4097f3f65b3b..98862aa5bb58 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -55,7 +55,6 @@ struct pci_serial_quirk {
 struct serial_private {
 	struct pci_dev		*dev;
 	unsigned int		nr;
-	void __iomem		*remapped_bar[PCI_NUM_BAR_RESOURCES];
 	struct pci_serial_quirk	*quirk;
 	int			line[0];
 };
@@ -85,15 +84,13 @@ setup_port(struct serial_private *priv, struct uart_8250_port *port,
 		return -EINVAL;
 
 	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
-		if (!priv->remapped_bar[bar])
-			priv->remapped_bar[bar] = pci_ioremap_bar(dev, bar);
-		if (!priv->remapped_bar[bar])
+		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
 			return -ENOMEM;
 
 		port->port.iotype = UPIO_MEM;
 		port->port.iobase = 0;
 		port->port.mapbase = pci_resource_start(dev, bar) + offset;
-		port->port.membase = priv->remapped_bar[bar] + offset;
+		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
 		port->port.regshift = regshift;
 	} else {
 		port->port.iotype = UPIO_PORT;
@@ -721,7 +718,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
 	 */
 	pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
 	device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
-	                | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+			| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
 	writel(device_window, p + MITE_IOWBSR1);
 
 	/* Set window access to go to RAMSEL IO address space */
@@ -803,12 +800,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
 	unsigned int pi;
 	unsigned short sub_serports;
 
-	pi = (c & 0xff);
+	pi = c & 0xff;
 
-	if (pi == 2) {
+	if (pi == 2)
 		return 1;
-	} else if ((pi == 0) &&
-			   (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+
+	if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
 		/* two possibilities: 0x30ps encodes number of parallel and
 		 * serial ports, or 0x1000 indicates *something*. This is not
 		 * immediately obvious, since the 2s1p+4s configuration seems
@@ -816,12 +813,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
 		 * advertising the same function 3 as the 4s+2s1p config.
 		 */
 		sub_serports = dev->subsystem_device & 0xf;
-		if (sub_serports > 0) {
+		if (sub_serports > 0)
 			return sub_serports;
-		} else {
-			dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
-			return 0;
-		}
+
+		dev_err(&dev->dev,
+			"NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+		return 0;
 	}
 
 	moan_device("unknown NetMos/Mostech program interface", dev);
@@ -842,21 +839,21 @@ static int pci_netmos_init(struct pci_dev *dev)
 		return 0;
 
 	switch (dev->device) { /* FALLTHROUGH on all */
-		case PCI_DEVICE_ID_NETMOS_9904:
-		case PCI_DEVICE_ID_NETMOS_9912:
-		case PCI_DEVICE_ID_NETMOS_9922:
-		case PCI_DEVICE_ID_NETMOS_9900:
-			num_serial = pci_netmos_9900_numports(dev);
-			break;
+	case PCI_DEVICE_ID_NETMOS_9904:
+	case PCI_DEVICE_ID_NETMOS_9912:
+	case PCI_DEVICE_ID_NETMOS_9922:
+	case PCI_DEVICE_ID_NETMOS_9900:
+		num_serial = pci_netmos_9900_numports(dev);
+		break;
 
-		default:
-			if (num_serial == 0 ) {
-				moan_device("unknown NetMos/Mostech device", dev);
-			}
+	default:
+		break;
 	}
 
-	if (num_serial == 0)
+	if (num_serial == 0) {
+		moan_device("unknown NetMos/Mostech device", dev);
 		return -ENODEV;
+	}
 
 	return num_serial;
 }
@@ -1198,8 +1195,9 @@ static int pci_quatech_has_qmcr(struct uart_8250_port *port)
 
 static int pci_quatech_test(struct uart_8250_port *port)
 {
-	u8 reg;
-	u8 qopr = pci_quatech_rqopr(port);
+	u8 reg, qopr;
+
+	qopr = pci_quatech_rqopr(port);
 	pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
 	reg = pci_quatech_rqopr(port) & 0xC0;
 	if (reg != QPCR_TEST_GET1)
@@ -1286,6 +1284,7 @@ static int pci_quatech_init(struct pci_dev *dev)
 		unsigned long base = pci_resource_start(dev, 0);
 		if (base) {
 			u32 tmp;
+
 			outl(inl(base + 0x38) | 0x00002000, base + 0x38);
 			tmp = inl(base + 0x3c);
 			outl(tmp | 0x01000000, base + 0x3c);
@@ -1334,29 +1333,6 @@ static int pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
-static int pci_pericom_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	unsigned int bar, offset = board->first_offset, maxnr;
-
-	bar = FL_GET_BASE(board->flags);
-	if (board->flags & FL_BASE_BARS)
-		bar += idx;
-	else
-		offset += idx * board->uart_offset;
-
-	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
-		(board->reg_shift + 3);
-
-	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
-		return 1;
-
-	port->port.uartclk = 14745600;
-
-	return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
 static int
 ce4100_serial_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -1379,6 +1355,9 @@ ce4100_serial_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_INTEL_BSW_UART1	0x228a
 #define PCI_DEVICE_ID_INTEL_BSW_UART2	0x228c
 
+#define PCI_DEVICE_ID_INTEL_BDW_UART1	0x9ce3
+#define PCI_DEVICE_ID_INTEL_BDW_UART2	0x9ce4
+
 #define BYT_PRV_CLK			0x800
 #define BYT_PRV_CLK_EN			(1 << 0)
 #define BYT_PRV_CLK_M_VAL_SHIFT		1
@@ -1461,11 +1440,13 @@ byt_serial_setup(struct serial_private *priv,
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT_UART1:
 	case PCI_DEVICE_ID_INTEL_BSW_UART1:
+	case PCI_DEVICE_ID_INTEL_BDW_UART1:
 		rx_param->src_id = 3;
 		tx_param->dst_id = 2;
 		break;
 	case PCI_DEVICE_ID_INTEL_BYT_UART2:
 	case PCI_DEVICE_ID_INTEL_BSW_UART2:
+	case PCI_DEVICE_ID_INTEL_BDW_UART2:
 		rx_param->src_id = 5;
 		tx_param->dst_id = 4;
 		break;
@@ -1536,10 +1517,9 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
 static int pci_fintek_rs485_config(struct uart_port *port,
 			       struct serial_rs485 *rs485)
 {
+	struct pci_dev *pci_dev = to_pci_dev(port->dev);
 	u8 setting;
 	u8 *index = (u8 *) port->private_data;
-	struct pci_dev *pci_dev = container_of(port->dev, struct pci_dev,
-						dev);
 
 	pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
 
@@ -1761,7 +1741,7 @@ xr17v35x_has_slave(struct serial_private *priv)
 	const int dev_id = priv->dev->device;
 
 	return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
-	        (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+		(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
 }
 
 static int
@@ -1861,8 +1841,8 @@ pci_fastcom335_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch353_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16550A;
@@ -1871,8 +1851,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch38x_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16850;
@@ -1936,6 +1916,7 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
+#define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
 #define PCI_VENDOR_ID_PERICOM			0x12D8
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
@@ -2062,6 +2043,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -2226,16 +2221,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.exit		= pci_plx9050_exit,
 	},
 	/*
-	 * Pericom
-	 */
-	{
-		.vendor         = PCI_VENDOR_ID_PERICOM,
-		.device         = PCI_ANY_ID,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.setup          = pci_pericom_setup,
-	},
-	/*
 	 * PLX
 	 */
 	{
@@ -2618,6 +2603,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
+	/* WCH CH382 2S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
 	/* WCH CH382 2S1P card (16850 clone) */
 	{
 		.vendor         = PCIE_VENDOR_ID_WCH,
@@ -2936,6 +2929,7 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_wch382_2,
 	pbn_wch384_4,
 	pbn_pericom_PI7C9X7951,
 	pbn_pericom_PI7C9X7952,
@@ -3704,15 +3698,10 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
-	/*
-	 * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on,
-	 * but is overridden by byt_set_termios.
-	 */
 	[pbn_byt] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
 		.base_baud	= 2764800,
-		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
 	[pbn_qrk] = {
@@ -3756,6 +3745,13 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+	[pbn_wch382_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+		.first_offset	= 0xC0,
+	},
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -3804,6 +3800,20 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
 	{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
 
+	/* Moxa Smartio MUE boards handled by 8250_moxa */
+	{ PCI_VDEVICE(MOXA, 0x1024), },
+	{ PCI_VDEVICE(MOXA, 0x1025), },
+	{ PCI_VDEVICE(MOXA, 0x1045), },
+	{ PCI_VDEVICE(MOXA, 0x1144), },
+	{ PCI_VDEVICE(MOXA, 0x1160), },
+	{ PCI_VDEVICE(MOXA, 0x1161), },
+	{ PCI_VDEVICE(MOXA, 0x1182), },
+	{ PCI_VDEVICE(MOXA, 0x1183), },
+	{ PCI_VDEVICE(MOXA, 0x1322), },
+	{ PCI_VDEVICE(MOXA, 0x1342), },
+	{ PCI_VDEVICE(MOXA, 0x1381), },
+	{ PCI_VDEVICE(MOXA, 0x1683), },
+
 	/* Intel platforms with MID UART */
 	{ PCI_VDEVICE(INTEL, 0x081b), },
 	{ PCI_VDEVICE(INTEL, 0x081c), },
@@ -3991,12 +4001,6 @@ void pciserial_remove_ports(struct serial_private *priv)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
-	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
-		if (priv->remapped_bar[i])
-			iounmap(priv->remapped_bar[i]);
-		priv->remapped_bar[i] = NULL;
-	}
-
 	/*
 	 * Find the exit quirks.
 	 */
@@ -4068,7 +4072,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 
 	board = &pci_boards[ent->driver_data];
 
-	rc = pci_enable_device(dev);
+	rc = pcim_enable_device(dev);
 	pci_save_state(dev);
 	if (rc)
 		return rc;
@@ -4087,7 +4091,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 		 */
 		rc = serial_pci_guess_board(dev, &tmp);
 		if (rc)
-			goto disable;
+			return rc;
 	} else {
 		/*
 		 * We matched an explicit entry.  If we are able to
@@ -4103,16 +4107,11 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	}
 
 	priv = pciserial_init_ports(dev, board);
-	if (!IS_ERR(priv)) {
-		pci_set_drvdata(dev, priv);
-		return 0;
-	}
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
-	rc = PTR_ERR(priv);
-
- disable:
-	pci_disable_device(dev);
-	return rc;
+	pci_set_drvdata(dev, priv);
+	return 0;
 }
 
 static void pciserial_remove_one(struct pci_dev *dev)
@@ -4120,8 +4119,6 @@ static void pciserial_remove_one(struct pci_dev *dev)
 	struct serial_private *priv = pci_get_drvdata(dev);
 
 	pciserial_remove_ports(priv);
-
-	pci_disable_device(dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -4502,7 +4499,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
-		PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_8_1152000 },
 
 	/*
@@ -5506,6 +5503,16 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
 		pbn_byt },
 
+	/* Intel Broadwell */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+
 	/*
 	 * Intel Quark x1000
 	 */
@@ -5545,6 +5552,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch382_2 },
+
 	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },