summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-qup.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-qup.c')
-rw-r--r--drivers/spi/spi-qup.c80
1 files changed, 35 insertions, 45 deletions
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index fc1de86d3c8a..9f83d2950748 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -142,6 +142,7 @@ struct spi_qup {
int w_size; /* bytes per SPI word */
int tx_bytes;
int rx_bytes;
+ int qup_v1;
};
@@ -420,35 +421,12 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
config |= QUP_CONFIG_SPI_MODE;
writel_relaxed(config, controller->base + QUP_CONFIG);
- writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
+ /* only write to OPERATIONAL_MASK when register is present */
+ if (!controller->qup_v1)
+ writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
return 0;
}
-static void spi_qup_set_cs(struct spi_device *spi, bool enable)
-{
- struct spi_qup *controller = spi_master_get_devdata(spi->master);
-
- u32 iocontol, mask;
-
- iocontol = readl_relaxed(controller->base + SPI_IO_CONTROL);
-
- /* Disable auto CS toggle and use manual */
- iocontol &= ~SPI_IO_C_MX_CS_MODE;
- iocontol |= SPI_IO_C_FORCE_CS;
-
- iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
- iocontol |= SPI_IO_C_CS_SELECT(spi->chip_select);
-
- mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select;
-
- if (enable)
- iocontol |= mask;
- else
- iocontol &= ~mask;
-
- writel_relaxed(iocontol, controller->base + SPI_IO_CONTROL);
-}
-
static int spi_qup_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
@@ -511,7 +489,7 @@ static int spi_qup_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev;
void __iomem *base;
- u32 data, max_freq, iomode;
+ u32 max_freq, iomode;
int ret, irq, size;
dev = &pdev->dev;
@@ -554,15 +532,6 @@ static int spi_qup_probe(struct platform_device *pdev)
return ret;
}
- data = readl_relaxed(base + QUP_HW_VERSION);
-
- if (data < QUP_HW_VERSION_2_1_1) {
- clk_disable_unprepare(cclk);
- clk_disable_unprepare(iclk);
- dev_err(dev, "v.%08x is not supported\n", data);
- return -ENXIO;
- }
-
master = spi_alloc_master(dev, sizeof(struct spi_qup));
if (!master) {
clk_disable_unprepare(cclk);
@@ -571,12 +540,16 @@ static int spi_qup_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ /* use num-cs unless not present or out of range */
+ if (of_property_read_u16(dev->of_node, "num-cs",
+ &master->num_chipselect) ||
+ (master->num_chipselect > SPI_NUM_CHIPSELECTS))
+ master->num_chipselect = SPI_NUM_CHIPSELECTS;
+
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
- master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->max_speed_hz = max_freq;
- master->set_cs = spi_qup_set_cs;
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
@@ -591,6 +564,10 @@ static int spi_qup_probe(struct platform_device *pdev)
controller->cclk = cclk;
controller->irq = irq;
+ /* set v1 flag if device is version 1 */
+ if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
+ controller->qup_v1 = 1;
+
spin_lock_init(&controller->lock);
init_completion(&controller->done);
@@ -614,8 +591,8 @@ static int spi_qup_probe(struct platform_device *pdev)
size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
- dev_info(dev, "v.%08x IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
- data, controller->in_blk_sz, controller->in_fifo_sz,
+ dev_info(dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
+ controller->in_blk_sz, controller->in_fifo_sz,
controller->out_blk_sz, controller->out_fifo_sz);
writel_relaxed(1, base + QUP_SW_RESET);
@@ -628,10 +605,19 @@ static int spi_qup_probe(struct platform_device *pdev)
writel_relaxed(0, base + QUP_OPERATIONAL);
writel_relaxed(0, base + QUP_IO_M_MODES);
- writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
+
+ if (!controller->qup_v1)
+ writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
+
writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
base + SPI_ERROR_FLAGS_EN);
+ /* if earlier version of the QUP, disable INPUT_OVERRUN */
+ if (controller->qup_v1)
+ writel_relaxed(QUP_ERROR_OUTPUT_OVER_RUN |
+ QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN,
+ base + QUP_ERROR_FLAGS_EN);
+
writel_relaxed(0, base + SPI_CONFIG);
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
@@ -640,16 +626,19 @@ static int spi_qup_probe(struct platform_device *pdev)
if (ret)
goto error;
- ret = devm_spi_register_master(dev, master);
- if (ret)
- goto error;
-
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+
+ ret = devm_spi_register_master(dev, master);
+ if (ret)
+ goto disable_pm;
+
return 0;
+disable_pm:
+ pm_runtime_disable(&pdev->dev);
error:
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
@@ -750,6 +739,7 @@ static int spi_qup_remove(struct platform_device *pdev)
}
static const struct of_device_id spi_qup_dt_match[] = {
+ { .compatible = "qcom,spi-qup-v1.1.1", },
{ .compatible = "qcom,spi-qup-v2.1.1", },
{ .compatible = "qcom,spi-qup-v2.2.1", },
{ }
OpenPOWER on IntegriCloud