diff options
Diffstat (limited to 'drivers/spi/spi-pl022.c')
| -rw-r--r-- | drivers/spi/spi-pl022.c | 79 |
1 files changed, 70 insertions, 9 deletions
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index cf47802f00c9..959f2acff2d3 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -41,6 +41,7 @@ #include <linux/scatterlist.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> /* * This macro is used to define some register default values. @@ -1778,12 +1779,14 @@ static const struct pl022_config_chip pl022_default_chip_info = { static int pl022_setup(struct spi_device *spi) { struct pl022_config_chip const *chip_info; + struct pl022_config_chip chip_info_dt; struct chip_data *chip; struct ssp_clock_params clk_freq = { .cpsdvsr = 0, .scr = 0}; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); unsigned int bits = spi->bits_per_word; u32 tmp; + struct device_node *np = spi->dev.of_node; if (!spi->max_speed_hz) return -EINVAL; @@ -1806,10 +1809,32 @@ static int pl022_setup(struct spi_device *spi) chip_info = spi->controller_data; if (chip_info == NULL) { - chip_info = &pl022_default_chip_info; - /* spi_board_info.controller_data not is supplied */ - dev_dbg(&spi->dev, - "using default controller_data settings\n"); + if (np) { + chip_info_dt = pl022_default_chip_info; + + chip_info_dt.hierarchy = SSP_MASTER; + of_property_read_u32(np, "pl022,interface", + &chip_info_dt.iface); + of_property_read_u32(np, "pl022,com-mode", + &chip_info_dt.com_mode); + of_property_read_u32(np, "pl022,rx-level-trig", + &chip_info_dt.rx_lev_trig); + of_property_read_u32(np, "pl022,tx-level-trig", + &chip_info_dt.tx_lev_trig); + of_property_read_u32(np, "pl022,ctrl-len", + &chip_info_dt.ctrl_len); + of_property_read_u32(np, "pl022,wait-state", + &chip_info_dt.wait_state); + of_property_read_u32(np, "pl022,duplex", + &chip_info_dt.duplex); + + chip_info = &chip_info_dt; + } else { + chip_info = &pl022_default_chip_info; + /* spi_board_info.controller_data not is supplied */ + dev_dbg(&spi->dev, + "using default controller_data settings\n"); + } } else dev_dbg(&spi->dev, "using user supplied controller_data settings\n"); @@ -2006,7 +2031,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) struct pl022_ssp_controller *platform_info = adev->dev.platform_data; struct spi_master *master; struct pl022 *pl022 = NULL; /*Data for this driver */ - int status = 0, i; + struct device_node *np = adev->dev.of_node; + int status = 0, i, num_cs; dev_info(&adev->dev, "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid); @@ -2016,9 +2042,19 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) goto err_no_pdata; } + if (platform_info->num_chipselect) { + num_cs = platform_info->num_chipselect; + } else if (IS_ENABLED(CONFIG_OF)) { + of_property_read_u32(np, "num-cs", &num_cs); + } else { + dev_err(&adev->dev, "probe: no chip select defined\n"); + status = -ENODEV; + goto err_no_pdata; + } + /* Allocate master with space for data */ master = spi_alloc_master(dev, sizeof(struct pl022) + sizeof(int) * - platform_info->num_chipselect); + num_cs); if (master == NULL) { dev_err(&adev->dev, "probe - cannot alloc SPI master\n"); status = -ENOMEM; @@ -2038,17 +2074,41 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) * on this board */ master->bus_num = platform_info->bus_id; - master->num_chipselect = platform_info->num_chipselect; + master->num_chipselect = num_cs; master->cleanup = pl022_cleanup; master->setup = pl022_setup; master->prepare_transfer_hardware = pl022_prepare_transfer_hardware; master->transfer_one_message = pl022_transfer_one_message; master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware; master->rt = platform_info->rt; + master->dev.of_node = dev->of_node; - if (platform_info->num_chipselect && platform_info->chipselects) - for (i = 0; i < platform_info->num_chipselect; i++) + if (platform_info->num_chipselect && platform_info->chipselects) { + for (i = 0; i < num_cs; i++) pl022->chipselects[i] = platform_info->chipselects[i]; + } else if (IS_ENABLED(CONFIG_OF)) { + for (i = 0; i < num_cs; i++) { + int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); + + if (cs_gpio == -EPROBE_DEFER) { + status = -EPROBE_DEFER; + goto err_no_gpio; + } + + pl022->chipselects[i] = cs_gpio; + + if (gpio_is_valid(cs_gpio)) { + if (gpio_request(cs_gpio, "ssp-pl022")) + dev_err(&adev->dev, + "could not request %d gpio\n", + cs_gpio); + else if (gpio_direction_output(cs_gpio, 1)) + dev_err(&adev->dev, + "could set gpio %d as output\n", + cs_gpio); + } + } + } /* * Supports mode 0-3, loopback, and active low CS. Transfers are @@ -2158,6 +2218,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) err_no_ioremap: amba_release_regions(adev); err_no_ioregion: + err_no_gpio: spi_master_put(master); err_no_master: err_no_pdata: |
