summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-omap2-mcspi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-omap2-mcspi.c')
-rw-r--r--drivers/spi/spi-omap2-mcspi.c43
1 files changed, 30 insertions, 13 deletions
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 893c3d78e426..86d2158946bb 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -285,8 +285,12 @@ static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
timeout = jiffies + msecs_to_jiffies(1000);
while (!(__raw_readl(reg) & bit)) {
- if (time_after(jiffies, timeout))
- return -1;
+ if (time_after(jiffies, timeout)) {
+ if (!(__raw_readl(reg) & bit))
+ return -ETIMEDOUT;
+ else
+ return 0;
+ }
cpu_relax();
}
return 0;
@@ -805,6 +809,10 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
return 0;
}
+/*
+ * Note that we currently allow DMA only if we get a channel
+ * for both rx and tx. Otherwise we'll do PIO for both rx and tx.
+ */
static int omap2_mcspi_request_dma(struct spi_device *spi)
{
struct spi_master *master = spi->master;
@@ -823,21 +831,22 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
dma_cap_set(DMA_SLAVE, mask);
sig = mcspi_dma->dma_rx_sync_dev;
mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
- if (!mcspi_dma->dma_rx) {
- dev_err(&spi->dev, "no RX DMA engine channel for McSPI\n");
- return -EAGAIN;
- }
+ if (!mcspi_dma->dma_rx)
+ goto no_dma;
sig = mcspi_dma->dma_tx_sync_dev;
mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
if (!mcspi_dma->dma_tx) {
- dev_err(&spi->dev, "no TX DMA engine channel for McSPI\n");
dma_release_channel(mcspi_dma->dma_rx);
mcspi_dma->dma_rx = NULL;
- return -EAGAIN;
+ goto no_dma;
}
return 0;
+
+no_dma:
+ dev_warn(&spi->dev, "not using DMA for McSPI\n");
+ return -EAGAIN;
}
static int omap2_mcspi_setup(struct spi_device *spi)
@@ -870,7 +879,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) {
ret = omap2_mcspi_request_dma(spi);
- if (ret < 0)
+ if (ret < 0 && ret != -EAGAIN)
return ret;
}
@@ -928,6 +937,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
struct spi_device *spi;
struct spi_transfer *t = NULL;
struct spi_master *master;
+ struct omap2_mcspi_dma *mcspi_dma;
int cs_active = 0;
struct omap2_mcspi_cs *cs;
struct omap2_mcspi_device_config *cd;
@@ -937,6 +947,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
spi = m->spi;
master = spi->master;
+ mcspi_dma = mcspi->dma_channels + spi->chip_select;
cs = spi->controller_state;
cd = spi->controller_data;
@@ -993,7 +1004,8 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
__raw_writel(0, cs->base
+ OMAP2_MCSPI_TX0);
- if (m->is_dma_mapped || t->len >= DMA_MIN_BYTES)
+ if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
+ (m->is_dma_mapped || t->len >= DMA_MIN_BYTES))
count = omap2_mcspi_txrx_dma(spi, t);
else
count = omap2_mcspi_txrx_pio(spi, t);
@@ -1040,10 +1052,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
static int omap2_mcspi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
{
+ struct spi_device *spi;
struct omap2_mcspi *mcspi;
+ struct omap2_mcspi_dma *mcspi_dma;
struct spi_transfer *t;
+ spi = m->spi;
mcspi = spi_master_get_devdata(master);
+ mcspi_dma = mcspi->dma_channels + spi->chip_select;
m->actual_length = 0;
m->status = 0;
@@ -1078,7 +1094,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
if (m->is_dma_mapped || len < DMA_MIN_BYTES)
continue;
- if (tx_buf != NULL) {
+ if (mcspi_dma->dma_tx && tx_buf != NULL) {
t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
len, DMA_TO_DEVICE);
if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
@@ -1087,7 +1103,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
return -EINVAL;
}
}
- if (rx_buf != NULL) {
+ if (mcspi_dma->dma_rx && rx_buf != NULL) {
t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
DMA_FROM_DEVICE);
if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
@@ -1277,7 +1293,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_enable(&pdev->dev);
- if (status || omap2_mcspi_master_setup(mcspi) < 0)
+ status = omap2_mcspi_master_setup(mcspi);
+ if (status < 0)
goto disable_pm;
status = spi_register_master(master);
OpenPOWER on IntegriCloud