diff options
Diffstat (limited to 'drivers/serial/sh-sci.h')
| -rw-r--r-- | drivers/serial/sh-sci.h | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 4bc614e4221c..b223d6cbf33a 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -15,27 +15,17 @@ defined(CONFIG_CPU_SUBTYPE_SH7709) # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 -# define SCSMR_Ir 0xA44A0000 -# define IRDA_SCIF SCIF0 # define SCPCR 0xA4000116 # define SCPDR 0xA4000136 - -/* Set the clock source, - * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input - * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output - */ -# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL # define SCIF_ORER 0x0200 /* overrun error bit */ @@ -43,7 +33,6 @@ # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,39 +42,31 @@ # define SCSPTR1 0xffe0001c /* 8 bit SCI */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 -# define SCSCR_INIT(port) 0x3B #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e # define PWDR 0xA4050166 # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 # define SCSPTR1 0xa405013e @@ -94,62 +75,38 @@ # define SCSPTR4 0xa4050128 # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7724) # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -# define SCIF_BASE_ADDR 0x01030000 -# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR # define SCIF_PTR2_OFFS 0x0000020 -# define SCIF_LSR2_OFFS 0x0000024 # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ -# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 # define SCSPTR1 0xfe4b0020 # define SCSPTR2 0xfe4b0020 # define SCIF_ORER 0x0001 -# define SCSCR_INIT(port) 0x38 # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe08024 /* 16 bit SCIF */ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ - -#if defined(CONFIG_SH_SH2007) -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ -# define SCSCR_INIT(port) 0x38 -#else -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ -# define SCSCR_INIT(port) 0x3a -#endif - #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ @@ -159,7 +116,6 @@ # define SCSPTR4 0xffee0024 /* 16 bit SCIF */ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ @@ -174,52 +130,21 @@ # define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ # define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ # endif -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ # define SCSPTR2 0xffc50020 /* 16 bit SCIF */ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #else # error CPU subtype not defined #endif -/* SCSCR */ -#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ -#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ -#define SCI_CTRL_FLAGS_TE 0x20 /* all */ -#define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) -#else -#define SCI_CTRL_FLAGS_REIE 0 -#endif -/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ -/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ - /* SCxSR SCI */ #define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ @@ -300,23 +225,11 @@ /* SCFCR */ #define SCFCR_RFRST 0x0002 #define SCFCR_TFRST 0x0004 -#define SCFCR_TCRST 0x4000 #define SCFCR_MCE 0x0008 #define SCI_MAJOR 204 #define SCI_MINOR_START 8 -/* Generic serial flags */ -#define SCI_RX_THROTTLE 0x0000001 - -#define SCI_MAGIC 0xbabeface - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define SCI_EVENT_WRITE_WAKEUP 0 - #define SCI_IN(size, offset) \ if ((size) == 8) { \ return ioread8(port->membase + (offset)); \ @@ -445,8 +358,6 @@ SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCxSR, 0x14, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) @@ -476,8 +387,6 @@ SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCLSR, 0x24, 16) @@ -503,7 +412,6 @@ SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) @@ -597,64 +505,3 @@ static inline int sci_rxd_in(struct uart_port *port) return 1; } #endif - -/* - * Values for the BitRate Register (SCBRR) - * - * The values are actually divisors for a frequency which can - * be internal to the SH3 (14.7456MHz) or derived from an external - * clock source. This driver assumes the internal clock is used; - * to support using an external clock source, config options or - * possibly command-line options would need to be added. - * - * Also, to support speeds below 2400 (why?) the lower 2 bits of - * the SCSMR register would also need to be set to non-zero values. - * - * -- Greg Banks 27Feb2000 - * - * Answer: The SCBRR register is only eight bits, and the value in - * it gets larger with lower baud rates. At around 2400 (depending on - * the peripherial module clock) you run out of bits. However the - * lower two bits of SCSMR allow the module clock to be divided down, - * scaling the value which is needed in SCBRR. - * - * -- Stuart Menefy - 23 May 2000 - * - * I meant, why would anyone bother with bitrates below 2400. - * - * -- Greg Banks - 7Jul2000 - * - * You "speedist"! How will I use my 110bps ASR-33 teletype with paper - * tape reader as a console! - * - * -- Mitch Davis - 15 Jul 2000 - */ - -#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ - !defined(CONFIG_SH_SH2007) -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -static inline int scbrr_calc(struct uart_port *port, int bps, int clk) -{ - if (port->type == PORT_SCIF) - return (clk+16*bps)/(32*bps)-1; - else - return ((clk*2)+16*bps)/(16*bps)-1; -} -#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#else /* Generic SH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) -#endif |
