diff options
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r-- | drivers/serial/sh-sci.c | 92 |
1 files changed, 50 insertions, 42 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 3df2aaec829f..f0658d2c45b2 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -3,7 +3,7 @@ * * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2008 Paul Mundt * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). * * based off of the old drivers/char/sh-sci.c by: @@ -46,6 +46,7 @@ #include <linux/cpufreq.h> #include <linux/clk.h> #include <linux/ctype.h> +#include <linux/err.h> #ifdef CONFIG_SUPERH #include <asm/clock.h> @@ -78,7 +79,7 @@ struct sci_port { struct timer_list break_timer; int break_flag; -#ifdef CONFIG_SUPERH +#ifdef CONFIG_HAVE_CLK /* Port clock */ struct clk *clk; #endif @@ -831,7 +832,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) return IRQ_HANDLED; } -#ifdef CONFIG_CPU_FREQ +#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) /* * Here we define a transistion notifier so that we can update all of our * ports' baud rate when the peripheral clock changes. @@ -860,7 +861,7 @@ static int sci_notifier(struct notifier_block *self, * Clean this up later.. */ clk = clk_get(NULL, "module_clk"); - port->uartclk = clk_get_rate(clk) * 16; + port->uartclk = clk_get_rate(clk); clk_put(clk); } @@ -873,7 +874,7 @@ static int sci_notifier(struct notifier_block *self, } static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 }; -#endif /* CONFIG_CPU_FREQ */ +#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */ static int sci_request_irq(struct sci_port *port) { @@ -1008,7 +1009,7 @@ static int sci_startup(struct uart_port *port) if (s->enable) s->enable(port); -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#ifdef CONFIG_HAVE_CLK s->clk = clk_get(NULL, "module_clk"); #endif @@ -1030,7 +1031,7 @@ static void sci_shutdown(struct uart_port *port) if (s->disable) s->disable(port); -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#ifdef CONFIG_HAVE_CLK clk_put(s->clk); s->clk = NULL; #endif @@ -1041,24 +1042,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, { struct sci_port *s = &sci_ports[port->line]; unsigned int status, baud, smr_val; - int t; + int t = -1; baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - - switch (baud) { - case 0: - t = -1; - break; - default: - { -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) - t = SCBRR_VALUE(baud, clk_get_rate(s->clk)); -#else - t = SCBRR_VALUE(baud); -#endif - break; - } - } + if (likely(baud)) + t = SCBRR_VALUE(baud, port->uartclk); do { status = sci_in(port, SCxSR); @@ -1113,7 +1101,7 @@ static const char *sci_type(struct uart_port *port) case PORT_IRDA: return "irda"; } - return 0; + return NULL; } static void sci_release_port(struct uart_port *port) @@ -1145,19 +1133,23 @@ static void sci_config_port(struct uart_port *port, int flags) break; } -#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) - if (port->mapbase == 0) + if (port->flags & UPF_IOREMAP && !port->membase) { +#if defined(CONFIG_SUPERH64) port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); - - port->membase = (void __iomem *)port->mapbase; + port->membase = (void __iomem *)port->mapbase; +#else + port->membase = ioremap_nocache(port->mapbase, 0x40); #endif + + printk(KERN_ERR "sci: can't remap port#%d\n", port->line); + } } static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) { struct sci_port *s = &sci_ports[port->line]; - if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS) + if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) return -EINVAL; if (ser->baud_base < 2400) /* No paper tape reader for Mitch.. */ @@ -1207,17 +1199,17 @@ static void __init sci_init_ports(void) sci_ports[i].disable = h8300_sci_disable; #endif sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK; -#elif defined(CONFIG_SUPERH64) - sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16; -#else +#elif defined(CONFIG_HAVE_CLK) /* * XXX: We should use a proper SCI/SCIF clock */ { struct clk *clk = clk_get(NULL, "module_clk"); - sci_ports[i].port.uartclk = clk_get_rate(clk) * 16; + sci_ports[i].port.uartclk = clk_get_rate(clk); clk_put(clk); } +#else +#error "Need a valid uartclk" #endif sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i]; @@ -1285,7 +1277,7 @@ static int __init serial_console_setup(struct console *co, char *options) port->type = serial_console_port->type; -#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#ifdef CONFIG_HAVE_CLK if (!serial_console_port->clk) serial_console_port->clk = clk_get(NULL, "module_clk"); #endif @@ -1436,7 +1428,7 @@ static struct uart_driver sci_uart_driver = { static int __devinit sci_probe(struct platform_device *dev) { struct plat_sci_port *p = dev->dev.platform_data; - int i; + int i, ret = -EINVAL; for (i = 0; p && p->flags != 0; p++, i++) { struct sci_port *sciport = &sci_ports[i]; @@ -1453,12 +1445,22 @@ static int __devinit sci_probe(struct platform_device *dev) sciport->port.mapbase = p->mapbase; - /* - * For the simple (and majority of) cases where we don't need - * to do any remapping, just cast the cookie directly. - */ - if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP)) - p->membase = (void __iomem *)p->mapbase; + if (p->mapbase && !p->membase) { + if (p->flags & UPF_IOREMAP) { + p->membase = ioremap_nocache(p->mapbase, 0x40); + if (IS_ERR(p->membase)) { + ret = PTR_ERR(p->membase); + goto err_unreg; + } + } else { + /* + * For the simple (and majority of) cases + * where we don't need to do any remapping, + * just cast the cookie directly. + */ + p->membase = (void __iomem *)p->mapbase; + } + } sciport->port.membase = p->membase; @@ -1479,7 +1481,7 @@ static int __devinit sci_probe(struct platform_device *dev) kgdb_putchar = kgdb_sci_putchar; #endif -#ifdef CONFIG_CPU_FREQ +#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); dev_info(&dev->dev, "CPU frequency notifier registered\n"); #endif @@ -1489,6 +1491,12 @@ static int __devinit sci_probe(struct platform_device *dev) #endif return 0; + +err_unreg: + for (i = i - 1; i >= 0; i--) + uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); + + return ret; } static int __devexit sci_remove(struct platform_device *dev) |