diff options
Diffstat (limited to 'drivers/serial/Kconfig')
| -rw-r--r-- | drivers/serial/Kconfig | 55 |
1 files changed, 37 insertions, 18 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 8a053ea21e1d..84a054d7e986 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -465,20 +465,24 @@ config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT select SERIAL_CORE - help - DZ11-family serial controllers for VAXstations, including the - DC7085, M7814, and M7819. + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. config SERIAL_DZ_CONSOLE bool "Support console on DECstation DZ serial driver" depends on SERIAL_DZ=y select SERIAL_CORE_CONSOLE - help + default y + ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user - mode). Note that the firmware uses ttyS0 as the serial console on - the Maxine and ttyS2 on the others. + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. If unsure, say Y. @@ -877,15 +881,15 @@ config SERIAL_SUNHV systems. Say Y if you want to be able to use this device. config SERIAL_IP22_ZILOG - tristate "IP22 Zilog8530 serial support" - depends on SGI_IP22 + tristate "SGI Zilog8530 serial support" + depends on SGI_HAS_ZILOG select SERIAL_CORE help - This driver supports the Zilog8530 serial ports found on SGI IP22 + This driver supports the Zilog8530 serial ports found on SGI systems. Say Y or M if you want to be able to these serial ports. config SERIAL_IP22_ZILOG_CONSOLE - bool "Console on IP22 Zilog8530 serial port" + bool "Console on SGI Zilog8530 serial port" depends on SERIAL_IP22_ZILOG=y select SERIAL_CORE_CONSOLE @@ -1138,17 +1142,17 @@ config SERIAL_SGI_L1_CONSOLE say Y. Otherwise, say N. config SERIAL_MPC52xx - tristate "Freescale MPC52xx family PSC serial support" - depends on PPC_MPC52xx + tristate "Freescale MPC52xx/MPC512x family PSC serial support" + depends on PPC_MPC52xx || PPC_MPC512x select SERIAL_CORE help - This drivers support the MPC52xx PSC serial ports. If you would - like to use them, you must answer Y or M to this option. Not that + This driver supports MPC52xx and MPC512x PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Note that for use as console, it must be included in kernel and not as a module. config SERIAL_MPC52xx_CONSOLE - bool "Console on a Freescale MPC52xx family PSC serial port" + bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" depends on SERIAL_MPC52xx=y select SERIAL_CORE_CONSOLE help @@ -1156,7 +1160,7 @@ config SERIAL_MPC52xx_CONSOLE of the Freescale MPC52xx family as a console. config SERIAL_MPC52xx_CONSOLE_BAUD - int "Freescale MPC52xx family PSC serial port baud" + int "Freescale MPC52xx/MPC512x family PSC serial port baud" depends on SERIAL_MPC52xx_CONSOLE=y default "9600" help @@ -1295,8 +1299,8 @@ config SERIAL_NETX_CONSOLE depends on SERIAL_NETX select SERIAL_CORE_CONSOLE help - If you have enabled the serial port on the Motorola IMX - CPU you can make it the console by answering Y to this option. + If you have enabled the serial port on the Hilscher NetX SoC + you can make it the console by answering Y to this option. config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" @@ -1318,4 +1322,19 @@ config SERIAL_QE This driver supports the QE serial ports on Freescale embedded PowerPC that contain a QUICC Engine. +config SERIAL_SC26XX + tristate "SC2681/SC2692 serial port support" + depends on SNI_RM + select SERIAL_CORE + help + This is a driver for the onboard serial ports of + older RM400 machines. + +config SERIAL_SC26XX_CONSOLE + bool "Console on SC2681/SC2692 serial port" + depends on SERIAL_SC26XX + select SERIAL_CORE_CONSOLE + help + Support for Console on SC2681/SC2692 serial ports. + endmenu |
