summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/a100u2w.c2
-rw-r--r--drivers/scsi/initio.c2
-rw-r--r--drivers/scsi/libfc/fc_fcp.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c4
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.h2
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c2
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c2
-rw-r--r--drivers/scsi/pmcraid.h2
-rw-r--r--drivers/scsi/sd.c2
-rw-r--r--drivers/scsi/ses.c4
-rw-r--r--drivers/scsi/sgiwd93.c2
-rw-r--r--drivers/scsi/sni_53c710.c2
13 files changed, 17 insertions, 17 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df9ed59..ff5716d5f044 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host)
* init_orchid - initialise the host adapter
* @host:host adapter to initialise
*
- * Initialise the controller and if neccessary load the firmware.
+ * Initialise the controller and if necessary load the firmware.
*
* Returns -1 if the initialisation fails.
*/
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a59484be02..a7714160fbc3 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base)
* initio_stop_bm - stop bus master
* @host: InitIO we are stopping
*
- * Stop any pending DMA operation, aborting the DMA if neccessary
+ * Stop any pending DMA operation, aborting the DMA if necessary
*/
static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 6fde2fabfd9b..774e7ac837a5 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep;
#define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
#define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
#define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
-#define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */
+#define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */
#define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
#define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
#define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
@@ -519,7 +519,7 @@ crc_err:
*
* Called after receiving a Transfer Ready data descriptor.
* If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
* multiple frames of the maximum frame payload supported by
* the target port.
*/
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 08b6634cb994..2a40a6eabf4d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -981,7 +981,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* function returns, it does not guarantee all the IOCBs are actually aborted.
*
* Return code
- * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ * 0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
**/
int
lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -3129,7 +3129,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
(*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
/* A LS_RJT associated with Default RPI cleanup has its own
- * seperate code path.
+ * separate code path.
*/
if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
ls_rjt = 1;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f21b47db791..483fb74bc592 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1575,7 +1575,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
case LPFC_PG_TYPE_NO_DIF:
num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
datasegcnt);
- /* we shoud have 2 or more entries in buffer list */
+ /* we should have 2 or more entries in buffer list */
if (num_bde < 2)
goto err;
break;
@@ -1612,7 +1612,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
datasegcnt, protsegcnt);
- /* we shoud have 3 or more entries in buffer list */
+ /* we should have 3 or more entries in buffer list */
if (num_bde < 3)
goto err;
break;
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd49446..8c61a4fe1db9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
#define S_IO BIT(1) /* Input/Output line from SCSI bus */
#define S_CD BIT(2) /* Command/Data line from SCSI bus */
#define S_BUSY BIT(3) /* Busy line from SCSI bus */
-#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */
+#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */
#define S_REQUEST BIT(5) /* Request line from SCSI bus */
#define S_SELECT BIT(6) /* */
#define S_ATN BIT(7) /* */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10e..7985ae45d688 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
default:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unkown device type(%x)\n", deviceType));
+ pm8001_printk("unknown device type(%x)\n", deviceType));
break;
}
phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a76390..3b2c98fba834 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
* by the command "OPC_INB_REG_DEV", after that the HBA will assign a
* device ID(according to device's sas address) and returned it to LLDD. From
* now on, we communicate with HBA FW with the device ID which HBA assigned
- * rather than sas address. it is the neccessary step for our HBA but it is
+ * rather than sas address. it is the necessary step for our HBA but it is
* the optional for other HBA driver.
*/
static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d50850c..b8ad07c3449e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
/*
* pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
*
* .signature : always ASCII string, "PMCRAID"
* .reserved : not used
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1dd4d8407694..83881dfb33c0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2111,7 +2111,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
* which is followed by sdaaa.
*
* This is basically 26 base counting with one extra 'nil' entry
- * at the beggining from the second digit on and can be
+ * at the beginning from the second digit on and can be
* determined using similar method as 26 base conversion with the
* index shifted -1 after each digit is computed.
*
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 1d7a8780e00c..0d9d6f7567f5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -595,8 +595,6 @@ static int ses_intf_add(struct device *cdev,
ses_dev->page10_len = len;
buf = NULL;
}
- kfree(hdr_buf);
-
scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL);
if (!scomp)
goto err_free;
@@ -608,6 +606,8 @@ static int ses_intf_add(struct device *cdev,
goto err_free;
}
+ kfree(hdr_buf);
+
edev->scratch = ses_dev;
for (i = 0; i < components; i++)
edev->component[i].scratch = scomp + i;
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 0807b260268b..fef0e3c75b16 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -226,7 +226,7 @@ static struct scsi_host_template sgiwd93_template = {
.use_clustering = DISABLE_CLUSTERING,
};
-static int __init sgiwd93_probe(struct platform_device *pdev)
+static int __devinit sgiwd93_probe(struct platform_device *pdev)
{
struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
unsigned char *wdregs = pd->wdregs;
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 37b3359e863e..56cf0bb4ed1f 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -64,7 +64,7 @@ static struct scsi_host_template snirm710_template = {
.module = THIS_MODULE,
};
-static int __init snirm710_probe(struct platform_device *dev)
+static int __devinit snirm710_probe(struct platform_device *dev)
{
unsigned long base;
struct NCR_700_Host_Parameters *hostdata;
OpenPOWER on IntegriCloud