summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/3w-9xxx.c30
-rw-r--r--drivers/scsi/53c7xx.c4
-rw-r--r--drivers/scsi/Kconfig7
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/ahci.c16
-rw-r--r--drivers/scsi/ata_piix.c24
-rw-r--r--drivers/scsi/ch.c29
-rw-r--r--drivers/scsi/cpqfcTSinit.c3
-rw-r--r--drivers/scsi/ibmmca.c1
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c22
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c7
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h17
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c7
-rw-r--r--drivers/scsi/osst.c13
-rw-r--r--drivers/scsi/pluto.c3
-rw-r--r--drivers/scsi/qla2xxx/qla_attr.c18
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c4
-rw-r--r--drivers/scsi/sata_mv.c16
-rw-r--r--drivers/scsi/sata_sis.c96
-rw-r--r--drivers/scsi/sata_uli.c14
-rw-r--r--drivers/scsi/scsi_lib.c138
-rw-r--r--drivers/scsi/scsi_priv.h1
-rw-r--r--drivers/scsi/scsi_scan.c88
-rw-r--r--drivers/scsi/scsi_sysfs.c28
-rw-r--r--drivers/scsi/scsi_transport_sas.c820
-rw-r--r--drivers/scsi/sg.c4
27 files changed, 1159 insertions, 254 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index bc6e4627c7a1..a6ac61611f35 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -59,6 +59,7 @@
Fix 'handled=1' ISR usage, remove bogus IRQ check.
Remove un-needed eh_abort handler.
Add support for embedded firmware error strings.
+ 2.26.02.003 - Correctly handle single sgl's with use_sg=1.
*/
#include <linux/module.h>
@@ -81,7 +82,7 @@
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.002"
+#define TW_DRIVER_VERSION "2.26.02.003"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@@ -1805,6 +1806,8 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH) {
command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
+ if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)
+ memcpy(tw_dev->generic_buffer_virt[request_id], tw_dev->srb[request_id]->request_buffer, tw_dev->srb[request_id]->request_bufflen);
} else {
buffaddr = twa_map_scsi_single_data(tw_dev, request_id);
if (buffaddr == 0)
@@ -1823,6 +1826,12 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
if (tw_dev->srb[request_id]->use_sg > 0) {
if ((tw_dev->srb[request_id]->use_sg == 1) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
+ if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL) {
+ struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
+ char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ memcpy(tw_dev->generic_buffer_virt[request_id], buf, sg->length);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
+ }
command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
} else {
@@ -1888,11 +1897,20 @@ out:
/* This function completes an execute scsi operation */
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id)
{
- /* Copy the response if too small */
- if ((tw_dev->srb[request_id]->request_buffer) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
- memcpy(tw_dev->srb[request_id]->request_buffer,
- tw_dev->generic_buffer_virt[request_id],
- tw_dev->srb[request_id]->request_bufflen);
+ if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH &&
+ (tw_dev->srb[request_id]->sc_data_direction == DMA_FROM_DEVICE ||
+ tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)) {
+ if (tw_dev->srb[request_id]->use_sg == 0) {
+ memcpy(tw_dev->srb[request_id]->request_buffer,
+ tw_dev->generic_buffer_virt[request_id],
+ tw_dev->srb[request_id]->request_bufflen);
+ }
+ if (tw_dev->srb[request_id]->use_sg == 1) {
+ struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
+ char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ memcpy(buf, tw_dev->generic_buffer_virt[request_id], sg->length);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
+ }
}
} /* End twa_scsiop_execute_scsi_complete() */
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index 2341d27ceed7..7a33c708f5b3 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -6090,8 +6090,8 @@ NCR53c7x0_release(struct Scsi_Host *host) {
if (hostdata->num_cmds)
printk ("scsi%d : leaked %d NCR53c7x0_cmd structures\n",
host->host_no, hostdata->num_cmds);
- if (hostdata->events)
- vfree ((void *)hostdata->events);
+
+ vfree(hostdata->events);
/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, which
* XXX may be invalid (CONFIG_060_WRITETHROUGH)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2d21265e650b..20019b82b4a8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -235,6 +235,13 @@ config SCSI_ISCSI_ATTRS
each attached iSCSI device to sysfs, say Y.
Otherwise, say N.
+config SCSI_SAS_ATTRS
+ tristate "SAS Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SAS device to sysfs, say Y.
+
endmenu
menu "SCSI low-level drivers"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 4b4fd94c2674..1e4edbdf2730 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_RAID_ATTRS) += raid_class.o
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
+obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 320df6cd3def..c2c8fa828e24 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -865,22 +865,6 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
return 0;
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_intx(struct pci_dev *pdev, int enable)
-{
- u16 pci_command, new;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-
- if (enable)
- new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
- else
- new = pci_command | PCI_COMMAND_INTX_DISABLE;
-
- if (new != pci_command)
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-}
-
static void ahci_print_info(struct ata_probe_ent *probe_ent)
{
struct ahci_host_priv *hpriv = probe_ent->private_data;
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index deec0cef88d9..87e0c36f1554 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -68,8 +68,8 @@ enum {
PIIX_COMB_PATA_P0 = (1 << 1),
PIIX_COMB = (1 << 2), /* combined mode enabled? */
- PIIX_PORT_PRESENT = (1 << 0),
- PIIX_PORT_ENABLED = (1 << 4),
+ PIIX_PORT_ENABLED = (1 << 0),
+ PIIX_PORT_PRESENT = (1 << 4),
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
@@ -377,7 +377,9 @@ static void piix_pata_phy_reset(struct ata_port *ap)
* None (inherited from caller).
*
* RETURNS:
- * Non-zero if device detected, zero otherwise.
+ * Non-zero if port is enabled, it may or may not have a device
+ * attached in that case (PRESENT bit would only be set if BIOS probe
+ * was done). Zero is returned if port is disabled.
*/
static int piix_sata_probe (struct ata_port *ap)
{
@@ -401,7 +403,7 @@ static int piix_sata_probe (struct ata_port *ap)
*/
for (i = 0; i < 4; i++) {
- mask = (PIIX_PORT_PRESENT << i) | (PIIX_PORT_ENABLED << i);
+ mask = (PIIX_PORT_ENABLED << i);
if ((orig_mask & mask) == mask)
if (combined || (i == ap->hard_port_no))
@@ -566,18 +568,6 @@ static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
-}
-
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
@@ -675,7 +665,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
* message-signalled interrupts currently).
*/
if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
- pci_enable_intx(pdev);
+ pci_intx(pdev, 1);
if (combined) {
port_info[sata_chan] = &piix_port_info[ent->driver_data];
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index bd0e1b6be1ea..da6e51c7fe69 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -116,7 +116,7 @@ typedef struct {
} scsi_changer;
static LIST_HEAD(ch_devlist);
-static spinlock_t ch_devlist_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(ch_devlist_lock);
static int ch_devcount;
static struct scsi_driver ch_template =
@@ -560,7 +560,7 @@ ch_set_voltag(scsi_changer *ch, u_int elem,
return result;
}
-static int ch_gstatus(scsi_changer *ch, int type, unsigned char *dest)
+static int ch_gstatus(scsi_changer *ch, int type, unsigned char __user *dest)
{
int retval = 0;
u_char data[16];
@@ -634,6 +634,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
{
scsi_changer *ch = file->private_data;
int retval;
+ void __user *argp = (void __user *)arg;
switch (cmd) {
case CHIOGPARAMS:
@@ -646,7 +647,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
params.cp_nportals = ch->counts[CHET_IE];
params.cp_ndrives = ch->counts[CHET_DT];
- if (copy_to_user((void *) arg, &params, sizeof(params)))
+ if (copy_to_user(argp, &params, sizeof(params)))
return -EFAULT;
return 0;
}
@@ -671,7 +672,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
vparams.cvp_n4 = ch->counts[CHET_V4];
strncpy(vparams.cvp_label4,vendor_labels[3],16);
}
- if (copy_to_user((void *) arg, &vparams, sizeof(vparams)))
+ if (copy_to_user(argp, &vparams, sizeof(vparams)))
return -EFAULT;
return 0;
}
@@ -680,7 +681,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
{
struct changer_position pos;
- if (copy_from_user(&pos, (void*)arg, sizeof (pos)))
+ if (copy_from_user(&pos, argp, sizeof (pos)))
return -EFAULT;
if (0 != ch_checkrange(ch, pos.cp_type, pos.cp_unit)) {
@@ -699,7 +700,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
{
struct changer_move mv;
- if (copy_from_user(&mv, (void*)arg, sizeof (mv)))
+ if (copy_from_user(&mv, argp, sizeof (mv)))
return -EFAULT;
if (0 != ch_checkrange(ch, mv.cm_fromtype, mv.cm_fromunit) ||
@@ -721,7 +722,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
{
struct changer_exchange mv;
- if (copy_from_user(&mv, (void*)arg, sizeof (mv)))
+ if (copy_from_user(&mv, argp, sizeof (mv)))
return -EFAULT;
if (0 != ch_checkrange(ch, mv.ce_srctype, mv.ce_srcunit ) ||
@@ -746,7 +747,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
{
struct changer_element_status ces;
- if (copy_from_user(&ces, (void*)arg, sizeof (ces)))
+ if (copy_from_user(&ces, argp, sizeof (ces)))
return -EFAULT;
if (ces.ces_type < 0 || ces.ces_type >= CH_TYPES)
return -EINVAL;
@@ -762,7 +763,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
unsigned int elem;
int result,i;
- if (copy_from_user(&cge, (void*)arg, sizeof (cge)))
+ if (copy_from_user(&cge, argp, sizeof (cge)))
return -EFAULT;
if (0 != ch_checkrange(ch, cge.cge_type, cge.cge_unit))
@@ -825,7 +826,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
kfree(buffer);
up(&ch->lock);
- if (copy_to_user((void*)arg, &cge, sizeof (cge)))
+ if (copy_to_user(argp, &cge, sizeof (cge)))
return -EFAULT;
return result;
}
@@ -843,7 +844,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
struct changer_set_voltag csv;
int elem;
- if (copy_from_user(&csv, (void*)arg, sizeof(csv)))
+ if (copy_from_user(&csv, argp, sizeof(csv)))
return -EFAULT;
if (0 != ch_checkrange(ch, csv.csv_type, csv.csv_unit)) {
@@ -861,7 +862,7 @@ static int ch_ioctl(struct inode * inode, struct file * file,
}
default:
- return scsi_ioctl(ch->device, cmd, (void*)arg);
+ return scsi_ioctl(ch->device, cmd, argp);
}
}
@@ -894,9 +895,9 @@ static long ch_ioctl_compat(struct file * file,
case CHIOGSTATUS32:
{
struct changer_element_status32 ces32;
- unsigned char *data;
+ unsigned char __user *data;
- if (copy_from_user(&ces32, (void*)arg, sizeof (ces32)))
+ if (copy_from_user(&ces32, (void __user *)arg, sizeof (ces32)))
return -EFAULT;
if (ces32.ces_type < 0 || ces32.ces_type >= CH_TYPES)
return -EINVAL;
diff --git a/drivers/scsi/cpqfcTSinit.c b/drivers/scsi/cpqfcTSinit.c
index d72be0ce89c8..3fda8d455c5b 100644
--- a/drivers/scsi/cpqfcTSinit.c
+++ b/drivers/scsi/cpqfcTSinit.c
@@ -691,8 +691,7 @@ int cpqfcTS_ioctl( struct scsi_device *ScsiDev, int Cmnd, void *arg)
if( copy_to_user( vendor_cmd->bufp, buf, vendor_cmd->len))
result = -EFAULT;
- if( buf)
- kfree( buf);
+ kfree(buf);
return result;
}
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index b5dc35355570..6e54c7d9b33c 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -36,7 +36,6 @@
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/mca.h>
-#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/mca-legacy.h>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 0e089a42c03a..86eaf6d408d5 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -966,21 +966,21 @@ static void
lpfc_get_host_fabric_name (struct Scsi_Host *shost)
{
struct lpfc_hba *phba = (struct lpfc_hba*)shost->hostdata[0];
- u64 nodename;
+ u64 node_name;
spin_lock_irq(shost->host_lock);
if ((phba->fc_flag & FC_FABRIC) ||
((phba->fc_topology == TOPOLOGY_LOOP) &&
(phba->fc_flag & FC_PUBLIC_LOOP)))
- memcpy(&nodename, &phba->fc_fabparam.nodeName, sizeof(u64));
+ node_name = wwn_to_u64(phba->fc_fabparam.nodeName.wwn);
else
/* fabric is local port if there is no F/FL_Port */
- memcpy(&nodename, &phba->fc_nodename, sizeof(u64));
+ node_name = wwn_to_u64(phba->fc_nodename.wwn);
spin_unlock_irq(shost->host_lock);
- fc_host_fabric_name(shost) = be64_to_cpu(nodename);
+ fc_host_fabric_name(shost) = node_name;
}
@@ -1103,21 +1103,20 @@ lpfc_get_starget_node_name(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct lpfc_hba *phba = (struct lpfc_hba *) shost->hostdata[0];
- uint64_t node_name = 0;
+ u64 node_name = 0;
struct lpfc_nodelist *ndlp = NULL;
spin_lock_irq(shost->host_lock);
/* Search the mapped list for this target ID */
list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
if (starget->id == ndlp->nlp_sid) {
- memcpy(&node_name, &ndlp->nlp_nodename,
- sizeof(struct lpfc_name));
+ node_name = wwn_to_u64(ndlp->nlp_nodename.wwn);
break;
}
}
spin_unlock_irq(shost->host_lock);
- fc_starget_node_name(starget) = be64_to_cpu(node_name);
+ fc_starget_node_name(starget) = node_name;
}
static void
@@ -1125,21 +1124,20 @@ lpfc_get_starget_port_name(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct lpfc_hba *phba = (struct lpfc_hba *) shost->hostdata[0];
- uint64_t port_name = 0;
+ u64 port_name = 0;
struct lpfc_nodelist *ndlp = NULL;
spin_lock_irq(shost->host_lock);
/* Search the mapped list for this target ID */
list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
if (starget->id == ndlp->nlp_sid) {
- memcpy(&port_name, &ndlp->nlp_portname,
- sizeof(struct lpfc_name));
+ port_name = wwn_to_u64(ndlp->nlp_portname.wwn);
break;
}
}
spin_unlock_irq(shost->host_lock);
- fc_starget_port_name(starget) = be64_to_cpu(port_name);
+ fc_starget_port_name(starget) = port_name;
}
static void
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 0a8269d6b130..4fb8eb0c84cf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1017,13 +1017,10 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
struct fc_rport *rport;
struct lpfc_rport_data *rdata;
struct fc_rport_identifiers rport_ids;
- uint64_t wwn;
/* Remote port has reappeared. Re-register w/ FC transport */
- memcpy(&wwn, &ndlp->nlp_nodename, sizeof(uint64_t));
- rport_ids.node_name = be64_to_cpu(wwn);
- memcpy(&wwn, &ndlp->nlp_portname, sizeof(uint64_t));
- rport_ids.port_name = be64_to_cpu(wwn);
+ rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.wwn);
+ rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.wwn);
rport_ids.port_id = ndlp->nlp_DID;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (ndlp->nlp_type & NLP_FCP_TARGET)
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 21591cb9f551..047a87c26cc0 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -262,12 +262,14 @@ struct lpfc_sli_ct_request {
#define FF_FRAME_SIZE 2048
struct lpfc_name {
+ union {
+ struct {
#ifdef __BIG_ENDIAN_BITFIELD
- uint8_t nameType:4; /* FC Word 0, bit 28:31 */
- uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
+ uint8_t nameType:4; /* FC Word 0, bit 28:31 */
+ uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
#else /* __LITTLE_ENDIAN_BITFIELD */
- uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
- uint8_t nameType:4; /* FC Word 0, bit 28:31 */
+ uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
+ uint8_t nameType:4; /* FC Word 0, bit 28:31 */
#endif
#define NAME_IEEE 0x1 /* IEEE name - nameType */
@@ -276,8 +278,11 @@ struct lpfc_name {
#define NAME_IP_TYPE 0x4 /* IP address */
#define NAME_CCITT_TYPE 0xC
#define NAME_CCITT_GR_TYPE 0xE
- uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE extended Lsb */
- uint8_t IEEE[6]; /* FC IEEE address */
+ uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE extended Lsb */
+ uint8_t IEEE[6]; /* FC IEEE address */
+ };
+ uint8_t wwn[8];
+ };
};
struct csp {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6f3cb59bf9e0..454058f655db 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1333,7 +1333,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
unsigned long bar0map_len, bar2map_len;
int error = -ENODEV, retval;
int i;
- u64 wwname;
if (pci_enable_device(pdev))
goto out;
@@ -1524,10 +1523,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
* Must done after lpfc_sli_hba_setup()
*/
- memcpy(&wwname, &phba->fc_nodename, sizeof(u64));
- fc_host_node_name(host) = be64_to_cpu(wwname);
- memcpy(&wwname, &phba->fc_portname, sizeof(u64));
- fc_host_port_name(host) = be64_to_cpu(wwname);
+ fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.wwn);
+ fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.wwn);
fc_host_supported_classes(host) = FC_COS_CLASS3;
memset(fc_host_supported_fc4s(host), 0,
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 89a4a0615c22..3f2f2464fa63 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -1377,7 +1377,7 @@ static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct scsi
if ((STp->buffer)->syscall_result || !SRpnt) {
printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name);
- vfree((void *)buffer);
+ vfree(buffer);
*aSRpnt = SRpnt;
return (-EIO);
}
@@ -1419,7 +1419,7 @@ static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct scsi
if (new_frame > frame + 1000) {
printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name);
- vfree((void *)buffer);
+ vfree(buffer);
return (-EIO);
}
if ( i >= nframes + pending ) break;
@@ -1500,7 +1500,7 @@ static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct scsi
SRpnt->sr_sense_buffer[12] == 0 &&
SRpnt->sr_sense_buffer[13] == 2) {
printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name);
- vfree((void *)buffer);
+ vfree(buffer);
return (-EIO); /* hit end of tape = fail */
}
i = ((SRpnt->sr_sense_buffer[3] << 24) |
@@ -1525,7 +1525,7 @@ static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct scsi
}
if (!pending)
osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */
- vfree((void *)buffer);
+ vfree(buffer);
return 0;
}
@@ -5852,7 +5852,7 @@ static int osst_remove(struct device *dev)
os_scsi_tapes[i] = NULL;
osst_nr_dev--;
write_unlock(&os_scsi_tapes_lock);
- if (tpnt->header_cache != NULL) vfree(tpnt->header_cache);
+ vfree(tpnt->header_cache);
if (tpnt->buffer) {
normalize_buffer(tpnt->buffer);
kfree(tpnt->buffer);
@@ -5896,8 +5896,7 @@ static void __exit exit_osst (void)
for (i=0; i < osst_max_dev; ++i) {
if (!(STp = os_scsi_tapes[i])) continue;
/* This is defensive, supposed to happen during detach */
- if (STp->header_cache)
- vfree(STp->header_cache);
+ vfree(STp->header_cache);
if (STp->buffer) {
normalize_buffer(STp->buffer);
kfree(STp->buffer);
diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c
index 623082d3a83f..c89da7d5b6df 100644
--- a/drivers/scsi/pluto.c
+++ b/drivers/scsi/pluto.c
@@ -95,8 +95,7 @@ int __init pluto_detect(Scsi_Host_Template *tpnt)
int i, retry, nplutos;
fc_channel *fc;
Scsi_Device dev;
- struct timer_list fc_timer =
- TIMER_INITIALIZER(pluto_detect_timeout, 0, 0);
+ DEFINE_TIMER(fc_timer, pluto_detect_timeout, 0, 0);
tpnt->proc_name = "pluto";
fcscount = 0;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fe0fce71adc7..fc25cd834668 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -360,16 +360,16 @@ qla2x00_get_starget_node_name(struct scsi_target *starget)
struct Scsi_Host *host = dev_to_shost(starget->dev.parent);
scsi_qla_host_t *ha = to_qla_host(host);
fc_port_t *fcport;
- uint64_t node_name = 0;
+ u64 node_name = 0;
list_for_each_entry(fcport, &ha->fcports, list) {
if (starget->id == fcport->os_target_id) {
- node_name = *(uint64_t *)fcport->node_name;
+ node_name = wwn_to_u64(fcport->node_name);
break;
}
}
- fc_starget_node_name(starget) = be64_to_cpu(node_name);
+ fc_starget_node_name(starget) = node_name;
}
static void
@@ -378,16 +378,16 @@ qla2x00_get_starget_port_name(struct scsi_target *starget)
struct Scsi_Host *host = dev_to_shost(starget->dev.parent);
scsi_qla_host_t *ha = to_qla_host(host);
fc_port_t *fcport;
- uint64_t port_name = 0;
+ u64 port_name = 0;
list_for_each_entry(fcport, &ha->fcports, list) {
if (starget->id == fcport->os_target_id) {
- port_name = *(uint64_t *)fcport->port_name;
+ port_name = wwn_to_u64(fcport->port_name);
break;
}
}
- fc_starget_port_name(starget) = be64_to_cpu(port_name);
+ fc_starget_port_name(starget) = port_name;
}
static void
@@ -460,9 +460,7 @@ struct fc_function_template qla2xxx_transport_functions = {
void
qla2x00_init_host_attr(scsi_qla_host_t *ha)
{
- fc_host_node_name(ha->host) =
- be64_to_cpu(*(uint64_t *)ha->init_cb->node_name);
- fc_host_port_name(ha->host) =
- be64_to_cpu(*(uint64_t *)ha->init_cb->port_name);
+ fc_host_node_name(ha->host) = wwn_to_u64(ha->init_cb->node_name);
+ fc_host_port_name(ha->host) = wwn_to_u64(ha->init_cb->port_name);
fc_host_supported_classes(ha->host) = FC_COS_CLASS3;
}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 72bbaa91dc77..9791496fa788 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1334,7 +1334,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0);
WRT_REG_DWORD(dmp_reg, 0xB0200000);
- dmp_reg = (uint32_t *)((uint8_t *)reg + 0xFC);
+ dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC);
fw->shadow_reg[2] = RD_REG_DWORD(dmp_reg);
dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index c619583e646b..3e9b64137873 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2066,8 +2066,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
return;
}
- rport_ids.node_name = be64_to_cpu(*(uint64_t *)fcport->node_name);
- rport_ids.port_name = be64_to_cpu(*(uint64_t *)fcport->port_name);
+ rport_ids.node_name = wwn_to_u64(fcport->node_name);
+ rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index f97e3afa97d9..ea76fe44585e 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -699,22 +699,6 @@ static int mv_host_init(struct ata_probe_ent *probe_ent)
return rc;
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_intx(struct pci_dev *pdev, int enable)
-{
- u16 pci_command, new;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-
- if (enable)
- new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
- else
- new = pci_command | PCI_COMMAND_INTX_DISABLE;
-
- if (new != pci_command)
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-}
-
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 43af445b3ad2..a63f93186e41 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -52,7 +52,10 @@ enum {
/* PCI configuration registers */
SIS_GENCTL = 0x54, /* IDE General Control register */
SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */
- SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
+ SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
+ SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */
+ SIS_PMR = 0x90, /* port mapping register */
+ SIS_PMR_COMBINED = 0x30,
/* random bits */
SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */
@@ -67,6 +70,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static struct pci_device_id sis_pci_tbl[] = {
{ PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
{ PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
+ { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
{ } /* terminate list */
};
@@ -139,67 +143,95 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
+static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device)
{
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
- if (port_no)
- addr += SIS_SATA1_OFS;
+ if (port_no) {
+ if (device == 0x182)
+ addr += SIS182_SATA1_OFS;
+ else
+ addr += SIS180_SATA1_OFS;
+ }
+
return addr;
}
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg);
- u32 val;
+ unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
+ u32 val, val2;
+ u8 pmr;
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
return 0xffffffff;
+
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+
pci_read_config_dword(pdev, cfg_addr, &val);
- return val;
+
+ if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
+
+ return val|val2;
}
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr);
+ unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device);
+ u8 pmr;
if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */
return;
+
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+
pci_write_config_dword(pdev, cfg_addr, val);
+
+ if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ pci_write_config_dword(pdev, cfg_addr+0x10, val);
}
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
+ struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
+ u32 val, val2 = 0;
+ u8 pmr;
+
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
if (ap->flags & SIS_FLAG_CFGSCR)
return sis_scr_cfg_read(ap, sc_reg);
- return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
+
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+
+ val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
+
+ if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
+
+ return val | val2;
}
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
+ struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
+ u8 pmr;
+
if (sc_reg > SCR_CONTROL)
return;
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+
if (ap->flags & SIS_FLAG_CFGSCR)
sis_scr_cfg_write(ap, sc_reg, val);
- else
+ else {
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
-}
-
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
+ if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
}
}
@@ -210,6 +242,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u32 genctl;
struct ata_port_info *ppi;
int pci_dev_busy = 0;
+ u8 pmr;
+ u8 port2_start;
rc = pci_enable_device(pdev);
if (rc)
@@ -251,15 +285,31 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
}
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+ if (ent->device != 0x182) {
+ if ((pmr & SIS_PMR_COMBINED) == 0) {
+ printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
+ port2_start=0x64;
+ }
+ else {
+ printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
+ port2_start=0;
+ }
+ }
+ else {
+ printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
+ port2_start = 0x20;
+ }
+
if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) {
probe_ent->port[0].scr_addr =
pci_resource_start(pdev, SIS_SCR_PCI_BAR);
probe_ent->port[1].scr_addr =
- pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64;
+ pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start;
}
pci_set_master(pdev);
- pci_enable_intx(pdev);
+ pci_intx(pdev, 1);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 42e13ed8eb5b..4c9fb8b71be1 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -176,18 +176,6 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
uli_scr_cfg_write(ap, sc_reg, val);
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
-}
-
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct ata_probe_ent *probe_ent;
@@ -260,7 +248,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
}
pci_set_master(pdev);
- pci_enable_intx(pdev);
+ pci_intx(pdev, 1);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 77f2d444f7e0..863bb6495daa 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -97,6 +97,30 @@ int scsi_insert_special_req(struct scsi_request *sreq, int at_head)
}
static void scsi_run_queue(struct request_queue *q);
+static void scsi_release_buffers(struct scsi_cmnd *cmd);
+
+/*
+ * Function: scsi_unprep_request()
+ *
+ * Purpose: Remove all preparation done for a request, including its
+ * associated scsi_cmnd, so that it can be requeued.
+ *
+ * Arguments: req - request to unprepare
+ *
+ * Lock status: Assumed that no locks are held upon entry.
+ *
+ * Returns: Nothing.
+ */
+static void scsi_unprep_request(struct request *req)
+{
+ struct scsi_cmnd *cmd = req->special;
+
+ req->flags &= ~REQ_DONTPREP;
+ req->special = (req->flags & REQ_SPECIAL) ? cmd->sc_request : NULL;
+
+ scsi_release_buffers(cmd);
+ scsi_put_command(cmd);
+}
/*
* Function: scsi_queue_insert()
@@ -116,12 +140,14 @@ static void scsi_run_queue(struct request_queue *q);
* commands.
* Notes: This could be called either from an interrupt context or a
* normal process context.
+ * Notes: Upon return, cmd is a stale pointer.
*/
int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
{
struct Scsi_Host *host = cmd->device->host;
struct scsi_device *device = cmd->device;
struct request_queue *q = device->request_queue;
+ struct request *req = cmd->request;
unsigned long flags;
SCSI_LOG_MLQUEUE(1,
@@ -162,8 +188,9 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
* function. The SCSI request function detects the blocked condition
* and plugs the queue appropriately.
*/
+ scsi_unprep_request(req);
spin_lock_irqsave(q->queue_lock, flags);
- blk_requeue_request(q, cmd->request);
+ blk_requeue_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
scsi_run_queue(q);
@@ -339,7 +366,7 @@ int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
int result;
if (sshdr) {
- sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
if (!sense)
return DRIVER_ERROR << 24;
memset(sense, 0, SCSI_SENSE_BUFFERSIZE);
@@ -552,15 +579,16 @@ static void scsi_run_queue(struct request_queue *q)
* I/O errors in the middle of the request, in which case
* we need to request the blocks that come after the bad
* sector.
+ * Notes: Upon return, cmd is a stale pointer.
*/
static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
{
+ struct request *req = cmd->request;
unsigned long flags;
- cmd->request->flags &= ~REQ_DONTPREP;
-
+ scsi_unprep_request(req);
spin_lock_irqsave(q->queue_lock, flags);
- blk_requeue_request(q, cmd->request);
+ blk_requeue_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
scsi_run_queue(q);
@@ -595,13 +623,14 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
*
* Lock status: Assumed that lock is not held upon entry.
*
- * Returns: cmd if requeue done or required, NULL otherwise
+ * Returns: cmd if requeue required, NULL otherwise.
*
* Notes: This is called for block device requests in order to
* mark some number of sectors as complete.
*
* We are guaranteeing that the request queue will be goosed
* at some point during this call.
+ * Notes: If cmd was requeued, upon return it will be a stale pointer.
*/
static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate,
int bytes, int requeue)
@@ -624,14 +653,15 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate,
if (!uptodate && blk_noretry_request(req))
end_that_request_chunk(req, 0, leftover);
else {
- if (requeue)
+ if (requeue) {
/*
* Bleah. Leftovers again. Stick the
* leftovers in the front of the
* queue, and goose the queue again.
*/
scsi_requeue_command(q, cmd);
-
+ cmd = NULL;
+ }
return cmd;
}
}
@@ -857,15 +887,13 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
* requeueing right here - we will requeue down below
* when we handle the bad sectors.
*/
- cmd = scsi_end_request(cmd, 1, good_bytes, result == 0);
/*
- * If the command completed without error, then either finish off the
- * rest of the command, or start a new one.
+ * If the command completed without error, then either
+ * finish off the rest of the command, or start a new one.
*/
- if (result == 0 || cmd == NULL ) {
+ if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL)
return;
- }
}
/*
* Now, if we were good little boys and girls, Santa left us a request
@@ -880,7 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
* and quietly refuse further access.
*/
cmd->device->changed = 1;
- cmd = scsi_end_request(cmd, 0,
+ scsi_end_request(cmd, 0,
this_count, 1);
return;
} else {
@@ -914,7 +942,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
scsi_requeue_command(q, cmd);
result = 0;
} else {
- cmd = scsi_end_request(cmd, 0, this_count, 1);
+ scsi_end_request(cmd, 0, this_count, 1);
return;
}
break;
@@ -931,7 +959,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
dev_printk(KERN_INFO,
&cmd->device->sdev_gendev,
"Device not ready.\n");
- cmd = scsi_end_request(cmd, 0, this_count, 1);
+ scsi_end_request(cmd, 0, this_count, 1);
return;
case VOLUME_OVERFLOW:
if (!(req->flags & REQ_QUIET)) {
@@ -941,7 +969,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
__scsi_print_command(cmd->data_cmnd);
scsi_print_sense("", cmd);
}
- cmd = scsi_end_request(cmd, 0, block_bytes, 1);
+ scsi_end_request(cmd, 0, block_bytes, 1);
return;
default:
break;
@@ -972,7 +1000,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
block_bytes = req->hard_cur_sectors << 9;
if (!block_bytes)
block_bytes = req->data_len;
- cmd = scsi_end_request(cmd, 0, block_bytes, 1);
+ scsi_end_request(cmd, 0, block_bytes, 1);
}
}
EXPORT_SYMBOL(scsi_io_completion);
@@ -1118,7 +1146,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
if (unlikely(!scsi_device_online(sdev))) {
printk(KERN_ERR "scsi%d (%d:%d): rejecting I/O to offline device\n",
sdev->host->host_no, sdev->id, sdev->lun);
- return BLKPREP_KILL;
+ goto kill;
}
if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
/* OK, we're not in a running state don't prep
@@ -1128,7 +1156,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
* at all allowed down */
printk(KERN_ERR "scsi%d (%d:%d): rejecting I/O to dead device\n",
sdev->host->host_no, sdev->id, sdev->lun);
- return BLKPREP_KILL;
+ goto kill;
}
/* OK, we only allow special commands (i.e. not
* user initiated ones */
@@ -1160,11 +1188,11 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
if(unlikely(specials_only) && !(req->flags & REQ_SPECIAL)) {
if(specials_only == SDEV_QUIESCE ||
specials_only == SDEV_BLOCK)
- return BLKPREP_DEFER;
+ goto defer;
printk(KERN_ERR "scsi%d (%d:%d): rejecting I/O to device being removed\n",
sdev->host->host_no, sdev->id, sdev->lun);
- return BLKPREP_KILL;
+ goto kill;
}
@@ -1182,7 +1210,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
cmd->tag = req->tag;
} else {
blk_dump_rq_flags(req, "SCSI bad req");
- return BLKPREP_KILL;
+ goto kill;
}
/* note the overloading of req->special. When the tag
@@ -1220,8 +1248,13 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
* required).
*/
ret = scsi_init_io(cmd);
- if (ret) /* BLKPREP_KILL return also releases the command */
- return ret;
+ switch(ret) {
+ case BLKPREP_KILL:
+ /* BLKPREP_KILL return also releases the command */
+ goto kill;
+ case BLKPREP_DEFER:
+ goto defer;
+ }
/*
* Initialize the actual SCSI command for this request.
@@ -1231,7 +1264,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
if (unlikely(!drv->init_command(cmd))) {
scsi_release_buffers(cmd);
scsi_put_command(cmd);
- return BLKPREP_KILL;
+ goto kill;
}
} else {
memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
@@ -1262,6 +1295,9 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
if (sdev->device_busy == 0)
blk_plug_device(q);
return BLKPREP_DEFER;
+ kill:
+ req->errors = DID_NO_CONNECT << 16;
+ return BLKPREP_KILL;
}
/*
@@ -1336,19 +1372,24 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
}
/*
- * Kill requests for a dead device
+ * Kill a request for a dead device
*/
-static void scsi_kill_requests(request_queue_t *q)
+static void scsi_kill_request(struct request *req, request_queue_t *q)
{
- struct request *req;
+ struct scsi_cmnd *cmd = req->special;
+
+ blkdev_dequeue_request(req);
- while ((req = elv_next_request(q)) != NULL) {
- blkdev_dequeue_request(req);
- req->flags |= REQ_QUIET;
- while (end_that_request_first(req, 0, req->nr_sectors))
- ;
- end_that_request_last(req);
+ if (unlikely(cmd == NULL)) {
+ printk(KERN_CRIT "impossible request in %s.\n",
+ __FUNCTION__);
+ BUG();
}
+
+ scsi_init_cmd_errh(cmd);
+ cmd->result = DID_NO_CONNECT << 16;
+ atomic_inc(&cmd->device->iorequest_cnt);
+ __scsi_done(cmd);
}
/*
@@ -1371,7 +1412,8 @@ static void scsi_request_fn(struct request_queue *q)
if (!sdev) {
printk("scsi: killing requests for dead queue\n");
- scsi_kill_requests(q);
+ while ((req = elv_next_request(q)) != NULL)
+ scsi_kill_request(req, q);
return;
}
@@ -1398,11 +1440,7 @@ static void scsi_request_fn(struct request_queue *q)
if (unlikely(!scsi_device_online(sdev))) {
printk(KERN_ERR "scsi%d (%d:%d): rejecting I/O to offline device\n",
sdev->host->host_no, sdev->id, sdev->lun);
- blkdev_dequeue_request(req);
- req->flags |= REQ_QUIET;
- while (end_that_request_first(req, 0, req->nr_sectors))
- ;
- end_that_request_last(req);
+ scsi_kill_request(req, q);
continue;
}
@@ -1415,6 +1453,14 @@ static void scsi_request_fn(struct request_queue *q)
sdev->device_busy++;
spin_unlock(q->queue_lock);
+ cmd = req->special;
+ if (unlikely(cmd == NULL)) {
+ printk(KERN_CRIT "impossible request in %s.\n"
+ "please mail a stack trace to "
+ "linux-scsi@vger.kernel.org",
+ __FUNCTION__);
+ BUG();
+ }
spin_lock(shost->host_lock);
if (!scsi_host_queue_ready(q, shost, sdev))
@@ -1433,15 +1479,6 @@ static void scsi_request_fn(struct request_queue *q)
*/
spin_unlock_irq(shost->host_lock);
- cmd = req->special;
- if (unlikely(cmd == NULL)) {
- printk(KERN_CRIT "impossible request in %s.\n"
- "please mail a stack trace to "
- "linux-scsi@vger.kernel.org",
- __FUNCTION__);
- BUG();
- }
-
/*
* Finally, initialize any error handling parameters, and set up
* the timers for timeouts.
@@ -1477,6 +1514,7 @@ static void scsi_request_fn(struct request_queue *q)
* cases (host limits or settings) should run the queue at some
* later time.
*/
+ scsi_unprep_request(req);
spin_lock_irq(q->queue_lock);
blk_requeue_request(q, req);
sdev->device_busy--;
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index ee6de1768e53..d05f778d31a8 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -124,6 +124,7 @@ extern void scsi_sysfs_unregister(void);
extern void scsi_sysfs_device_initialize(struct scsi_device *);
extern int scsi_sysfs_target_initialize(struct scsi_device *);
extern struct scsi_transport_template blank_transport_template;
+extern void __scsi_remove_device(struct scsi_device *);
extern struct bus_type scsi_bus_type;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 19c9a232a754..b86f170fa8ed 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -870,8 +870,12 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
out_free_sdev:
if (res == SCSI_SCAN_LUN_PRESENT) {
if (sdevp) {
- scsi_device_get(sdev);
- *sdevp = sdev;
+ if (scsi_device_get(sdev) == 0) {
+ *sdevp = sdev;
+ } else {
+ __scsi_remove_device(sdev);
+ res = SCSI_SCAN_NO_RESPONSE;
+ }
}
} else {
if (sdev->host->hostt->slave_destroy)
@@ -1260,6 +1264,19 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
}
EXPORT_SYMBOL(__scsi_add_device);
+int scsi_add_device(struct Scsi_Host *host, uint channel,
+ uint target, uint lun)
+{
+ struct scsi_device *sdev =
+ __scsi_add_device(host, channel, target, lun, NULL);
+ if (IS_ERR(sdev))
+ return PTR_ERR(sdev);
+
+ scsi_device_put(sdev);
+ return 0;
+}
+EXPORT_SYMBOL(scsi_add_device);
+
void scsi_rescan_device(struct device *dev)
{
struct scsi_driver *drv;
@@ -1276,27 +1293,8 @@ void scsi_rescan_device(struct device *dev)
}
EXPORT_SYMBOL(scsi_rescan_device);
-/**
- * scsi_scan_target - scan a target id, possibly including all LUNs on the
- * target.
- * @sdevsca: Scsi_Device handle for scanning
- * @shost: host to scan
- * @channel: channel to scan
- * @id: target id to scan
- *
- * Description:
- * Scan the target id on @shost, @channel, and @id. Scan at least LUN
- * 0, and possibly all LUNs on the target id.
- *
- * Use the pre-allocated @sdevscan as a handle for the scanning. This
- * function sets sdevscan->host, sdevscan->id and sdevscan->lun; the
- * scanning functions modify sdevscan->lun.
- *
- * First try a REPORT LUN scan, if that does not scan the target, do a
- * sequential scan of LUNs on the target id.
- **/
-void scsi_scan_target(struct device *parent, unsigned int channel,
- unsigned int id, unsigned int lun, int rescan)
+static void __scsi_scan_target(struct device *parent, unsigned int channel,
+ unsigned int id, unsigned int lun, int rescan)
{
struct Scsi_Host *shost = dev_to_shost(parent);
int bflags = 0;
@@ -1310,9 +1308,7 @@ void scsi_scan_target(struct device *parent, unsigned int channel,
*/
return;
-
starget = scsi_alloc_target(parent, channel, id);
-
if (!starget)
return;
@@ -1358,6 +1354,33 @@ void scsi_scan_target(struct device *parent, unsigned int channel,
put_device(&starget->dev);
}
+
+/**
+ * scsi_scan_target - scan a target id, possibly including all LUNs on the
+ * target.
+ * @parent: host to scan
+ * @channel: channel to scan
+ * @id: target id to scan
+ * @lun: Specific LUN to scan or SCAN_WILD_CARD
+ * @rescan: passed to LUN scanning routines
+ *
+ * Description:
+ * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0,
+ * and possibly all LUNs on the target id.
+ *
+ * First try a REPORT LUN scan, if that does not scan the target, do a
+ * sequential scan of LUNs on the target id.
+ **/
+void scsi_scan_target(struct device *parent, unsigned int channel,
+ unsigned int id, unsigned int lun, int rescan)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+
+ down(&shost->scan_mutex);
+ if (scsi_host_scan_allowed(shost))
+ __scsi_scan_target(parent, channel, id, lun, rescan);
+ up(&shost->scan_mutex);
+}
EXPORT_SYMBOL(scsi_scan_target);
static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
@@ -1383,10 +1406,12 @@ static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
order_id = shost->max_id - id - 1;
else
order_id = id;
- scsi_scan_target(&shost->shost_gendev, channel, order_id, lun, rescan);
+ __scsi_scan_target(&shost->shost_gendev, channel,
+ order_id, lun, rescan);
}
else
- scsi_scan_target(&shost->shost_gendev, channel, id, lun, rescan);
+ __scsi_scan_target(&shost->shost_gendev, channel,
+ id, lun, rescan);
}
int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
@@ -1484,12 +1509,15 @@ void scsi_forget_host(struct Scsi_Host *shost)
*/
struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
{
- struct scsi_device *sdev;
+ struct scsi_device *sdev = NULL;
struct scsi_target *starget;
+ down(&shost->scan_mutex);
+ if (!scsi_host_scan_allowed(shost))
+ goto out;
starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id);
if (!starget)
- return NULL;
+ goto out;
sdev = scsi_alloc_sdev(starget, 0, NULL);
if (sdev) {
@@ -1497,6 +1525,8 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
sdev->borken = 0;
}
put_device(&starget->dev);
+ out:
+ up(&shost->scan_mutex);
return sdev;
}
EXPORT_SYMBOL(scsi_get_host_dev);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index dae59d1da07a..b8052d5206cc 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -653,7 +653,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
error = attr_add(&sdev->sdev_gendev,
sdev->host->hostt->sdev_attrs[i]);
if (error) {
- scsi_remove_device(sdev);
+ __scsi_remove_device(sdev);
goto out;
}
}
@@ -667,7 +667,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
scsi_sysfs_sdev_attrs[i]);
error = device_create_file(&sdev->sdev_gendev, attr);
if (error) {
- scsi_remove_device(sdev);
+ __scsi_remove_device(sdev);
goto out;
}
}
@@ -687,17 +687,10 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
return error;
}
-/**
- * scsi_remove_device - unregister a device from the scsi bus
- * @sdev: scsi_device to unregister
- **/
-void scsi_remove_device(struct scsi_device *sdev)
+void __scsi_remove_device(struct scsi_device *sdev)
{
- struct Scsi_Host *shost = sdev->host;
-
- down(&shost->scan_mutex);
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
- goto out;
+ return;
class_device_unregister(&sdev->sdev_classdev);
device_del(&sdev->sdev_gendev);
@@ -706,8 +699,17 @@ void scsi_remove_device(struct scsi_device *sdev)
sdev->host->hostt->slave_destroy(sdev);
transport_unregister_device(&sdev->sdev_gendev);
put_device(&sdev->sdev_gendev);
-out:
- up(&shost->scan_mutex);
+}
+
+/**
+ * scsi_remove_device - unregister a device from the scsi bus
+ * @sdev: scsi_device to unregister
+ **/
+void scsi_remove_device(struct scsi_device *sdev)
+{
+ down(&sdev->host->scan_mutex);
+ __scsi_remove_device(sdev);
+ up(&sdev->host->scan_mutex);
}
EXPORT_SYMBOL(scsi_remove_device);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
new file mode 100644
index 000000000000..ff724bbe6611
--- /dev/null
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -0,0 +1,820 @@
+/*
+ * Copyright (C) 2005 Dell Inc.
+ * Released under GPL v2.
+ *
+ * Serial Attached SCSI (SAS) transport class.
+ *
+ * The SAS transport class contains common code to deal with SAS HBAs,
+ * an aproximated representation of SAS topologies in the driver model,
+ * and various sysfs attributes to expose these topologies and managment
+ * interfaces to userspace.
+ *
+ * In addition to the basic SCSI core objects this transport class
+ * introduces two additional intermediate objects: The SAS PHY
+ * as represented by struct sas_phy defines an "outgoing" PHY on
+ * a SAS HBA or Expander, and the SAS remote PHY represented by
+ * struct sas_rphy defines an "incoming" PHY on a SAS Expander or
+ * end device. Note that this is purely a software concept, the
+ * underlying hardware for a PHY and a remote PHY is the exactly
+ * the same.
+ *
+ * There is no concept of a SAS port in this code, users can see
+ * what PHYs form a wide port based on the port_identifier attribute,
+ * which is the same for all PHYs in a port.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+
+#define SAS_HOST_ATTRS 0
+#define SAS_PORT_ATTRS 11
+#define SAS_RPORT_ATTRS 5
+
+struct sas_internal {
+ struct scsi_transport_template t;
+ struct sas_function_template *f;
+
+ struct class_device_attribute private_host_attrs[SAS_HOST_ATTRS];
+ struct class_device_attribute private_phy_attrs[SAS_PORT_ATTRS];
+ struct class_device_attribute private_rphy_attrs[SAS_RPORT_ATTRS];
+
+ struct transport_container phy_attr_cont;
+ struct transport_container rphy_attr_cont;
+
+ /*
+ * The array of null terminated pointers to attributes
+ * needed by scsi_sysfs.c
+ */
+ struct class_device_attribute *host_attrs[SAS_HOST_ATTRS + 1];
+ struct class_device_attribute *phy_attrs[SAS_PORT_ATTRS + 1];
+ struct class_device_attribute *rphy_attrs[SAS_RPORT_ATTRS + 1];
+};
+#define to_sas_internal(tmpl) container_of(tmpl, struct sas_internal, t)
+
+struct sas_host_attrs {
+ struct list_head rphy_list;
+ spinlock_t lock;
+ u32 next_target_id;
+};
+#define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data)
+
+
+/*
+ * Hack to allow attributes of the same name in different objects.
+ */
+#define SAS_CLASS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \
+ struct class_device_attribute class_device_attr_##_prefix##_##_name = \
+ __ATTR(_name,_mode,_show,_store)
+
+
+/*
+ * Pretty printing helpers
+ */
+
+#define sas_bitfield_name_match(title, table) \
+static ssize_t \
+get_sas_##title##_names(u32 table_key, char *buf) \
+{ \
+ char *prefix = ""; \
+ ssize_t len = 0; \
+ int i; \
+ \
+ for (i = 0; i < sizeof(table)/sizeof(table[0]); i++) { \
+ if (table[i].value & table_key) { \
+ len += sprintf(buf + len, "%s%s", \
+ prefix, table[i].name); \
+ prefix = ", "; \
+ } \
+ } \
+ len += sprintf(buf + len, "\n"); \
+ return len; \
+}
+
+#define sas_bitfield_name_search(title, table) \
+static ssize_t \
+get_sas_##title##_names(u32 table_key, char *buf) \
+{ \
+ ssize_t len = 0; \
+ int i; \
+ \
+ for (i = 0; i < sizeof(table)/sizeof(table[0]); i++) { \
+ if (table[i].value == table_key) { \
+ len += sprintf(buf + len, "%s", \
+ table[i].name); \
+ break; \
+ } \
+ } \
+ len += sprintf(buf + len, "\n"); \
+ return len; \
+}
+
+static struct {
+ u32 value;
+ char *name;
+} sas_device_type_names[] = {
+ { SAS_PHY_UNUSED, "unused" },
+ { SAS_END_DEVICE, "end device" },
+ { SAS_EDGE_EXPANDER_DEVICE, "edge expander" },
+ { SAS_FANOUT_EXPANDER_DEVICE, "fanout expander" },
+};
+sas_bitfield_name_search(device_type, sas_device_type_names)
+
+
+static struct {
+ u32 value;
+ char *name;
+} sas_protocol_names[] = {
+ { SAS_PROTOCOL_SATA, "sata" },
+ { SAS_PROTOCOL_SMP, "smp" },
+ { SAS_PROTOCOL_STP, "stp" },
+ { SAS_PROTOCOL_SSP, "ssp" },
+};
+sas_bitfield_name_match(protocol, sas_protocol_names)
+
+static struct {
+ u32 value;
+ char *name;
+} sas_linkspeed_names[] = {
+ { SAS_LINK_RATE_UNKNOWN, "Unknown" },
+ { SAS_PHY_DISABLED, "Phy disabled" },
+ { SAS_LINK_RATE_FAILED, "Link Rate failed" },
+ { SAS_SATA_SPINUP_HOLD, "Spin-up hold" },
+ { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" },
+ { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" },
+};
+sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
+
+
+/*
+ * SAS host attributes
+ */
+
+static int sas_host_setup(struct transport_container *tc, struct device *dev,
+ struct class_device *cdev)
+{
+ struct Scsi_Host *shost = dev_to_shost(dev);
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+
+ INIT_LIST_HEAD(&sas_host->rphy_list);
+ spin_lock_init(&sas_host->lock);
+ sas_host->next_target_id = 0;
+ return 0;
+}
+
+static DECLARE_TRANSPORT_CLASS(sas_host_class,
+ "sas_host", sas_host_setup, NULL, NULL);
+
+static int sas_host_match(struct attribute_container *cont,
+ struct device *dev)
+{
+ struct Scsi_Host *shost;
+ struct sas_internal *i;
+
+ if (!scsi_is_host_device(dev))
+ return 0;
+ shost = dev_to_shost(dev);
+
+ if (!shost->transportt)
+ return 0;
+ if (shost->transportt->host_attrs.ac.class !=
+ &sas_host_class.class)
+ return 0;
+
+ i = to_sas_internal(shost->transportt);
+ return &i->t.host_attrs.ac == cont;
+}
+
+static int do_sas_phy_delete(struct device *dev, void *data)
+{
+ if (scsi_is_sas_phy(dev))
+ sas_phy_delete(dev_to_phy(dev));
+ return 0;
+}
+
+/**
+ * sas_remove_host -- tear down a Scsi_Host's SAS data structures
+ * @shost: Scsi Host that is torn down
+ *
+ * Removes all SAS PHYs and remote PHYs for a given Scsi_Host.
+ * Must be called just before scsi_remove_host for SAS HBAs.
+ */
+void sas_remove_host(struct Scsi_Host *shost)
+{
+ device_for_each_child(&shost->shost_gendev, NULL, do_sas_phy_delete);
+}
+EXPORT_SYMBOL(sas_remove_host);
+
+
+/*
+ * SAS Port attributes
+ */
+
+#define sas_phy_show_simple(field, name, format_string, cast) \
+static ssize_t \
+show_sas_phy_##name(struct class_device *cdev, char *buf) \
+{ \
+ struct sas_phy *phy = transport_class_to_phy(cdev); \
+ \
+ return snprintf(buf, 20, format_string, cast phy->field); \
+}
+
+#define sas_phy_simple_attr(field, name, format_string, type) \
+ sas_phy_show_simple(field, name, format_string, (type)) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
+
+#define sas_phy_show_protocol(field, name) \
+static ssize_t \
+show_sas_phy_##name(struct class_device *cdev, char *buf) \
+{ \
+ struct sas_phy *phy = transport_class_to_phy(cdev); \
+ \
+ if (!phy->field) \
+ return snprintf(buf, 20, "none\n"); \
+ return get_sas_protocol_names(phy->field, buf); \
+}
+
+#define sas_phy_protocol_attr(field, name) \
+ sas_phy_show_protocol(field, name) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
+
+#define sas_phy_show_linkspeed(field) \
+static ssize_t \
+show_sas_phy_##field(struct class_device *cdev, char *buf) \
+{ \
+ struct sas_phy *phy = transport_class_to_phy(cdev); \
+ \
+ return get_sas_linkspeed_names(phy->field, buf); \
+}
+
+#define sas_phy_linkspeed_attr(field) \
+ sas_phy_show_linkspeed(field) \
+static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
+
+static ssize_t
+show_sas_device_type(struct class_device *cdev, char *buf)
+{
+ struct sas_phy *phy = transport_class_to_phy(cdev);
+
+ if (!phy->identify.device_type)
+ return snprintf(buf, 20, "none\n");
+ return get_sas_device_type_names(phy->identify.device_type, buf);
+}
+
+static CLASS_DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL);
+
+sas_phy_protocol_attr(identify.initiator_port_protocols,
+ initiator_port_protocols);
+sas_phy_protocol_attr(identify.target_port_protocols,
+ target_port_protocols);
+sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
+ unsigned long long);
+sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
+sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
+sas_phy_linkspeed_attr(negotiated_linkrate);
+sas_phy_linkspeed_attr(minimum_linkrate_hw);
+sas_phy_linkspeed_attr(minimum_linkrate);
+sas_phy_linkspeed_attr(maximum_linkrate_hw);
+sas_phy_linkspeed_attr(maximum_linkrate);
+
+
+static DECLARE_TRANSPORT_CLASS(sas_phy_class,
+ "sas_phy", NULL, NULL, NULL);
+
+static int sas_phy_match(struct attribute_container *cont, struct device *dev)
+{
+ struct Scsi_Host *shost;
+ struct sas_internal *i;
+
+ if (!scsi_is_sas_phy(dev))
+ return 0;
+ shost = dev_to_shost(dev->parent);
+
+ if (!shost->transportt)
+ return 0;
+ if (shost->transportt->host_attrs.ac.class !=
+ &sas_host_class.class)
+ return 0;
+
+ i = to_sas_internal(shost->transportt);
+ return &i->phy_attr_cont.ac == cont;
+}
+
+static void sas_phy_release(struct device *dev)
+{
+ struct sas_phy *phy = dev_to_phy(dev);
+
+ put_device(dev->parent);
+ kfree(phy);
+}
+
+/**
+ * sas_phy_alloc -- allocates and initialize a SAS PHY structure
+ * @parent: Parent device
+ * @number: Port number
+ *
+ * Allocates an SAS PHY structure. It will be added in the device tree
+ * below the device specified by @parent, which has to be either a Scsi_Host
+ * or sas_rphy.
+ *
+ * Returns:
+ * SAS PHY allocated or %NULL if the allocation failed.
+ */
+struct sas_phy *sas_phy_alloc(struct device *parent, int number)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ struct sas_phy *phy;
+
+ phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return NULL;
+ memset(phy, 0, sizeof(*phy));
+
+ get_device(parent);
+
+ phy->number = number;
+
+ device_initialize(&phy->dev);
+ phy->dev.parent = get_device(parent);
+ phy->dev.release = sas_phy_release;
+ sprintf(phy->dev.bus_id, "phy-%d:%d", shost->host_no, number);
+
+ transport_setup_device(&phy->dev);
+
+ return phy;
+}
+EXPORT_SYMBOL(sas_phy_alloc);
+
+/**
+ * sas_phy_add -- add a SAS PHY to the device hierachy
+ * @phy: The PHY to be added
+ *
+ * Publishes a SAS PHY to the rest of the system.
+ */
+int sas_phy_add(struct sas_phy *phy)
+{
+ int error;
+
+ error = device_add(&phy->dev);
+ if (!error) {
+ transport_add_device(&phy->dev);
+ transport_configure_device(&phy->dev);
+ }
+
+ return error;
+}
+EXPORT_SYMBOL(sas_phy_add);
+
+/**
+ * sas_phy_free -- free a SAS PHY
+ * @phy: SAS PHY to free
+ *
+ * Frees the specified SAS PHY.
+ *
+ * Note:
+ * This function must only be called on a PHY that has not
+ * sucessfully been added using sas_phy_add().
+ */
+void sas_phy_free(struct sas_phy *phy)
+{
+ transport_destroy_device(&phy->dev);
+ put_device(phy->dev.parent);
+ put_device(phy->dev.parent);
+ put_device(phy->dev.parent);
+ kfree(phy);
+}
+EXPORT_SYMBOL(sas_phy_free);
+
+/**
+ * sas_phy_delete -- remove SAS PHY
+ * @phy: SAS PHY to remove
+ *
+ * Removes the specified SAS PHY. If the SAS PHY has an
+ * associated remote PHY it is removed before.
+ */
+void
+sas_phy_delete(struct sas_phy *phy)
+{
+ struct device *dev = &phy->dev;
+
+ if (phy->rphy)
+ sas_rphy_delete(phy->rphy);
+
+ transport_remove_device(dev);
+ device_del(dev);
+ transport_destroy_device(dev);
+ put_device(dev->parent);
+}
+EXPORT_SYMBOL(sas_phy_delete);
+
+/**
+ * scsi_is_sas_phy -- check if a struct device represents a SAS PHY
+ * @dev: device to check
+ *
+ * Returns:
+ * %1 if the device represents a SAS PHY, %0 else
+ */
+int scsi_is_sas_phy(const struct device *dev)
+{
+ return dev->release == sas_phy_release;
+}
+EXPORT_SYMBOL(scsi_is_sas_phy);
+
+/*
+ * SAS remote PHY attributes.
+ */
+
+#define sas_rphy_show_simple(field, name, format_string, cast) \
+static ssize_t \
+show_sas_rphy_##name(struct class_device *cdev, char *buf) \
+{ \
+ struct sas_rphy *rphy = transport_class_to_rphy(cdev); \
+ \
+ return snprintf(buf, 20, format_string, cast rphy->field); \
+}
+
+#define sas_rphy_simple_attr(field, name, format_string, type) \
+ sas_rphy_show_simple(field, name, format_string, (type)) \
+static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO, \
+ show_sas_rphy_##name, NULL)
+
+#define sas_rphy_show_protocol(field, name) \
+static ssize_t \
+show_sas_rphy_##name(struct class_device *cdev, char *buf) \
+{ \
+ struct sas_rphy *rphy = transport_class_to_rphy(cdev); \
+ \
+ if (!rphy->field) \
+ return snprintf(buf, 20, "none\n"); \
+ return get_sas_protocol_names(rphy->field, buf); \
+}
+
+#define sas_rphy_protocol_attr(field, name) \
+ sas_rphy_show_protocol(field, name) \
+static SAS_CLASS_DEVICE_ATTR(rphy, name, S_IRUGO, \
+ show_sas_rphy_##name, NULL)
+
+static ssize_t
+show_sas_rphy_device_type(struct class_device *cdev, char *buf)
+{
+ struct sas_rphy *rphy = transport_class_to_rphy(cdev);
+
+ if (!rphy->identify.device_type)
+ return snprintf(buf, 20, "none\n");
+ return get_sas_device_type_names(
+ rphy->identify.device_type, buf);
+}
+
+static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
+ show_sas_rphy_device_type, NULL);
+
+sas_rphy_protocol_attr(identify.initiator_port_protocols,
+ initiator_port_protocols);
+sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
+sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
+ unsigned long long);
+sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
+
+static DECLARE_TRANSPORT_CLASS(sas_rphy_class,
+ "sas_rphy", NULL, NULL, NULL);
+
+static int sas_rphy_match(struct attribute_container *cont, struct device *dev)
+{
+ struct Scsi_Host *shost;
+ struct sas_internal *i;
+
+ if (!scsi_is_sas_rphy(dev))
+ return 0;
+ shost = dev_to_shost(dev->parent->parent);
+
+ if (!shost->transportt)
+ return 0;
+ if (shost->transportt->host_attrs.ac.class !=
+ &sas_host_class.class)
+ return 0;
+
+ i = to_sas_internal(shost->transportt);
+ return &i->rphy_attr_cont.ac == cont;
+}
+
+static void sas_rphy_release(struct device *dev)
+{
+ struct sas_rphy *rphy = dev_to_rphy(dev);
+
+ put_device(dev->parent);
+ kfree(rphy);
+}
+
+/**
+ * sas_rphy_alloc -- allocates and initialize a SAS remote PHY structure
+ * @parent: SAS PHY this remote PHY is conneted to
+ *
+ * Allocates an SAS remote PHY structure, connected to @parent.
+ *
+ * Returns:
+ * SAS PHY allocated or %NULL if the allocation failed.
+ */
+struct sas_rphy *sas_rphy_alloc(struct sas_phy *parent)
+{
+ struct Scsi_Host *shost = dev_to_shost(&parent->dev);
+ struct sas_rphy *rphy;
+
+ rphy = kmalloc(sizeof(*rphy), GFP_KERNEL);
+ if (!rphy) {
+ put_device(&parent->dev);
+ return NULL;
+ }
+ memset(rphy, 0, sizeof(*rphy));
+
+ device_initialize(&rphy->dev);
+ rphy->dev.parent = get_device(&parent->dev);
+ rphy->dev.release = sas_rphy_release;
+ sprintf(rphy->dev.bus_id, "rphy-%d:%d",
+ shost->host_no, parent->number);
+ transport_setup_device(&rphy->dev);
+
+ return rphy;
+}
+EXPORT_SYMBOL(sas_rphy_alloc);
+
+/**
+ * sas_rphy_add -- add a SAS remote PHY to the device hierachy
+ * @rphy: The remote PHY to be added
+ *
+ * Publishes a SAS remote PHY to the rest of the system.
+ */
+int sas_rphy_add(struct sas_rphy *rphy)
+{
+ struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
+ struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+ struct sas_identify *identify = &rphy->identify;
+ int error;
+
+ if (parent->rphy)
+ return -ENXIO;
+ parent->rphy = rphy;
+
+ error = device_add(&rphy->dev);
+ if (error)
+ return error;
+ transport_add_device(&rphy->dev);
+ transport_configure_device(&rphy->dev);
+
+ spin_lock(&sas_host->lock);
+ list_add_tail(&rphy->list, &sas_host->rphy_list);
+ if (identify->device_type == SAS_END_DEVICE &&
+ (identify->target_port_protocols &
+ (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA)))
+ rphy->scsi_target_id = sas_host->next_target_id++;
+ else
+ rphy->scsi_target_id = -1;
+ spin_unlock(&sas_host->lock);
+
+ if (rphy->scsi_target_id != -1) {
+ scsi_scan_target(&rphy->dev, parent->number,
+ rphy->scsi_target_id, ~0, 0);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(sas_rphy_add);
+
+/**
+ * sas_rphy_free -- free a SAS remote PHY
+ * @rphy SAS remote PHY to free
+ *
+ * Frees the specified SAS remote PHY.
+ *
+ * Note:
+ * This function must only be called on a remote
+ * PHY that has not sucessfully been added using
+ * sas_rphy_add().
+ */
+void sas_rphy_free(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+
+ spin_lock(&sas_host->lock);
+ list_del(&rphy->list);
+ spin_unlock(&sas_host->lock);
+
+ transport_destroy_device(&rphy->dev);
+ put_device(rphy->dev.parent);
+ put_device(rphy->dev.parent);
+ put_device(rphy->dev.parent);
+ kfree(rphy);
+}
+EXPORT_SYMBOL(sas_rphy_free);
+
+/**
+ * sas_rphy_delete -- remove SAS remote PHY
+ * @rphy: SAS remote PHY to remove
+ *
+ * Removes the specified SAS remote PHY.
+ */
+void
+sas_rphy_delete(struct sas_rphy *rphy)
+{
+ struct device *dev = &rphy->dev;
+ struct sas_phy *parent = dev_to_phy(dev->parent);
+ struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+
+ transport_destroy_device(&rphy->dev);
+
+ scsi_remove_target(&rphy->dev);
+
+ spin_lock(&sas_host->lock);
+ list_del(&rphy->list);
+ spin_unlock(&sas_host->lock);
+
+ transport_remove_device(dev);
+ device_del(dev);
+ transport_destroy_device(dev);
+ put_device(&parent->dev);
+}
+EXPORT_SYMBOL(sas_rphy_delete);
+
+/**
+ * scsi_is_sas_rphy -- check if a struct device represents a SAS remote PHY
+ * @dev: device to check
+ *
+ * Returns:
+ * %1 if the device represents a SAS remote PHY, %0 else
+ */
+int scsi_is_sas_rphy(const struct device *dev)
+{
+ return dev->release == sas_rphy_release;
+}
+EXPORT_SYMBOL(scsi_is_sas_rphy);
+
+
+/*
+ * SCSI scan helper
+ */
+
+static struct device *sas_target_parent(struct Scsi_Host *shost,
+ int channel, uint id)
+{
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+ struct sas_rphy *rphy;
+ struct device *dev = NULL;
+
+ spin_lock(&sas_host->lock);
+ list_for_each_entry(rphy, &sas_host->rphy_list, list) {
+ struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
+ if (parent->number == channel &&
+ rphy->scsi_target_id == id)
+ dev = &rphy->dev;
+ }
+ spin_unlock(&sas_host->lock);
+
+ return dev;
+}
+
+
+/*
+ * Setup / Teardown code
+ */
+
+#define SETUP_RPORT_ATTRIBUTE(field) \
+ i->private_rphy_attrs[count] = class_device_attr_##field; \
+ i->private_rphy_attrs[count].attr.mode = S_IRUGO; \
+ i->private_rphy_attrs[count].store = NULL; \
+ i->rphy_attrs[count] = &i->private_rphy_attrs[count]; \
+ count++
+
+#define SETUP_PORT_ATTRIBUTE(field) \
+ i->private_phy_attrs[count] = class_device_attr_##field; \
+ i->private_phy_attrs[count].attr.mode = S_IRUGO; \
+ i->private_phy_attrs[count].store = NULL; \
+ i->phy_attrs[count] = &i->private_phy_attrs[count]; \
+ count++
+
+
+/**
+ * sas_attach_transport -- instantiate SAS transport template
+ * @ft: SAS transport class function template
+ */
+struct scsi_transport_template *
+sas_attach_transport(struct sas_function_template *ft)
+{
+ struct sas_internal *i;
+ int count;
+
+ i = kmalloc(sizeof(struct sas_internal), GFP_KERNEL);
+ if (!i)
+ return NULL;
+ memset(i, 0, sizeof(struct sas_internal));
+
+ i->t.target_parent = sas_target_parent;
+
+ i->t.host_attrs.ac.attrs = &i->host_attrs[0];
+ i->t.host_attrs.ac.class = &sas_host_class.class;
+ i->t.host_attrs.ac.match = sas_host_match;
+ transport_container_register(&i->t.host_attrs);
+ i->t.host_size = sizeof(struct sas_host_attrs);
+
+ i->phy_attr_cont.ac.class = &sas_phy_class.class;
+ i->phy_attr_cont.ac.attrs = &i->phy_attrs[0];
+ i->phy_attr_cont.ac.match = sas_phy_match;
+ transport_container_register(&i->phy_attr_cont);
+
+ i->rphy_attr_cont.ac.class = &sas_rphy_class.class;
+ i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0];
+ i->rphy_attr_cont.ac.match = sas_rphy_match;
+ transport_container_register(&i->rphy_attr_cont);
+
+ i->f = ft;
+
+ count = 0;
+ i->host_attrs[count] = NULL;
+
+ count = 0;
+ SETUP_PORT_ATTRIBUTE(initiator_port_protocols);
+ SETUP_PORT_ATTRIBUTE(target_port_protocols);
+ SETUP_PORT_ATTRIBUTE(device_type);
+ SETUP_PORT_ATTRIBUTE(sas_address);
+ SETUP_PORT_ATTRIBUTE(phy_identifier);
+ SETUP_PORT_ATTRIBUTE(port_identifier);
+ SETUP_PORT_ATTRIBUTE(negotiated_linkrate);
+ SETUP_PORT_ATTRIBUTE(minimum_linkrate_hw);
+ SETUP_PORT_ATTRIBUTE(minimum_linkrate);
+ SETUP_PORT_ATTRIBUTE(maximum_linkrate_hw);
+ SETUP_PORT_ATTRIBUTE(maximum_linkrate);
+ i->phy_attrs[count] = NULL;
+
+ count = 0;
+ SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols);
+ SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols);
+ SETUP_RPORT_ATTRIBUTE(rphy_device_type);
+ SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
+ SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
+ i->rphy_attrs[count] = NULL;
+
+ return &i->t;
+}
+EXPORT_SYMBOL(sas_attach_transport);
+
+/**
+ * sas_release_transport -- release SAS transport template instance
+ * @t: transport template instance
+ */
+void sas_release_transport(struct scsi_transport_template *t)
+{
+ struct sas_internal *i = to_sas_internal(t);
+
+ transport_container_unregister(&i->t.host_attrs);
+ transport_container_unregister(&i->phy_attr_cont);
+ transport_container_unregister(&i->rphy_attr_cont);
+
+ kfree(i);
+}
+EXPORT_SYMBOL(sas_release_transport);
+
+static __init int sas_transport_init(void)
+{
+ int error;
+
+ error = transport_class_register(&sas_host_class);
+ if (error)
+ goto out;
+ error = transport_class_register(&sas_phy_class);
+ if (error)
+ goto out_unregister_transport;
+ error = transport_class_register(&sas_rphy_class);
+ if (error)
+ goto out_unregister_phy;
+
+ return 0;
+
+ out_unregister_phy:
+ transport_class_unregister(&sas_phy_class);
+ out_unregister_transport:
+ transport_class_unregister(&sas_host_class);
+ out:
+ return error;
+
+}
+
+static void __exit sas_transport_exit(void)
+{
+ transport_class_unregister(&sas_host_class);
+ transport_class_unregister(&sas_phy_class);
+ transport_class_unregister(&sas_rphy_class);
+}
+
+MODULE_AUTHOR("Christoph Hellwig");
+MODULE_DESCRIPTION("SAS Transphy Attributes");
+MODULE_LICENSE("GPL");
+
+module_init(sas_transport_init);
+module_exit(sas_transport_exit);
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index b1b69d738d08..9ea4765d1d12 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -61,7 +61,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */
#ifdef CONFIG_SCSI_PROC_FS
#include <linux/proc_fs.h>
-static char *sg_version_date = "20050901";
+static char *sg_version_date = "20050908";
static int sg_proc_init(void);
static void sg_proc_cleanup(void);
@@ -1299,7 +1299,7 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma)
sg_rb_correct4mmap(rsv_schp, 1); /* do only once per fd lifetime */
sfp->mmap_called = 1;
}
- vma->vm_flags |= (VM_RESERVED | VM_IO);
+ vma->vm_flags |= VM_RESERVED;
vma->vm_private_data = sfp;
vma->vm_ops = &sg_mmap_vm_ops;
return 0;
OpenPOWER on IntegriCloud