diff options
Diffstat (limited to 'drivers/scsi')
30 files changed, 974 insertions, 534 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f1e8c4223ed1..12c208fb18c5 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1696,7 +1696,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" - depends on MAC && SCSI + depends on MAC && SCSI=y help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1717,7 +1717,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" - depends on MVME147 && SCSI + depends on MVME147 && SCSI=y help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1758,7 +1758,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" - depends on SUN3X && SCSI + depends on SUN3X && SCSI=y help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c5623694d10f..179c95c878ac 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1,26 +1,34 @@ /* * ahci.c - AHCI SATA support * - * Copyright 2004 Red Hat, Inc. + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. + * Copyright 2004-2005 Red Hat, Inc. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. * - * Version 1.0 of the AHCI specification: + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf * */ @@ -269,6 +277,8 @@ static struct pci_device_id ahci_pci_tbl[] = { board_ahci }, /* ESB2 */ { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ESB2 */ + { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7-M DH */ { } /* terminate list */ }; @@ -584,12 +594,16 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) static void ahci_eng_timeout(struct ata_port *ap) { - void *mmio = ap->host_set->mmio_base; + struct ata_host_set *host_set = ap->host_set; + void *mmio = host_set->mmio_base; void *port_mmio = ahci_port_base(mmio, ap->port_no); struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -607,6 +621,7 @@ static void ahci_eng_timeout(struct ata_port *ap) ata_qc_complete(qc, ATA_ERR); } + spin_unlock_irqrestore(&host_set->lock, flags); } static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) @@ -696,9 +711,6 @@ static int ahci_qc_issue(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void *port_mmio = (void *) ap->ioaddr.cmd_addr; - writel(1, port_mmio + PORT_SCR_ACT); - readl(port_mmio + PORT_SCR_ACT); /* flush */ - writel(1, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ @@ -1105,6 +1117,7 @@ MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("AHCI SATA low-level driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); module_init(ahci_init); module_exit(ahci_exit); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 116d0f51ca2c..687f19e9cf03 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -1264,14 +1264,12 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, } switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) { case AHC_DEV_Q_BASIC: - scsi_adjust_queue_depth(sdev, - MSG_SIMPLE_TASK, - dev->openings + dev->active); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); + scsi_activate_tcq(sdev, dev->openings + dev->active); break; case AHC_DEV_Q_TAGGED: - scsi_adjust_queue_depth(sdev, - MSG_ORDERED_TASK, - dev->openings + dev->active); + scsi_set_tag_type(sdev, MSG_ORDERED_TAG); + scsi_activate_tcq(sdev, dev->openings + dev->active); break; default: /* @@ -1280,9 +1278,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, * serially on the controller/device. This should * remove some latency. */ - scsi_adjust_queue_depth(sdev, - /*NON-TAGGED*/0, - /*queue depth*/2); + scsi_deactivate_tcq(sdev, 2); break; } } @@ -1635,9 +1631,9 @@ ahc_send_async(struct ahc_softc *ahc, char channel, spi_period(starget) = tinfo->curr.period; spi_width(starget) = tinfo->curr.width; spi_offset(starget) = tinfo->curr.offset; - spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ; - spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ; - spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ; + spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0; + spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0; + spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0; spi_display_xfer_agreement(starget); break; } @@ -2429,12 +2425,14 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt) unsigned int ppr_options = tinfo->goal.ppr_options & ~MSG_EXT_PPR_DT_REQ; unsigned int period = tinfo->goal.period; + unsigned int width = tinfo->goal.width; unsigned long flags; struct ahc_syncrate *syncrate; if (dt) { - period = 9; /* 12.5ns is the only period valid for DT */ ppr_options |= MSG_EXT_PPR_DT_REQ; + if (!width) + ahc_linux_set_width(starget, 1); } else if (period == 9) period = 10; /* if resetting DT, period must be >= 25ns */ diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 54b32868aaf7..13f23043c8a3 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -3,7 +3,7 @@ # config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" - depends on ARCH_ACORN && SCSI + depends on ARCH_ACORN && SCSI && BROKEN help This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index a2cfade2c1c6..fb28c1261848 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -1,24 +1,42 @@ /* - - ata_piix.c - Intel PATA/SATA controllers - - Maintained by: Jeff Garzik <jgarzik@pobox.com> - Please ALWAYS copy linux-ide@vger.kernel.org - on emails. - - - Copyright 2003-2004 Red Hat Inc - Copyright 2003-2004 Jeff Garzik - - - Copyright header from piix.c: - - Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - Copyright (C) 2003 Red Hat Inc <alan@redhat.com> - - May be copied or modified under the terms of the GNU General Public License - + * ata_piix.c - Intel PATA/SATA controllers + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * + * Copyright 2003-2005 Red Hat Inc + * Copyright 2003-2005 Jeff Garzik + * + * + * Copyright header from piix.c: + * + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available at http://developer.intel.com/ + * */ #include <linux/kernel.h> @@ -32,7 +50,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.03" +#define DRV_VERSION "1.04" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -629,13 +647,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[1] = NULL; if (port_info[0]->host_flags & PIIX_FLAG_AHCI) { - u8 tmp; - pci_read_config_byte(pdev, PIIX_SCC, &tmp); - if (tmp == PIIX_AHCI_DEVICE) { - int rc = piix_disable_ahci(pdev); - if (rc) - return rc; - } + u8 tmp; + pci_read_config_byte(pdev, PIIX_SCC, &tmp); + if (tmp == PIIX_AHCI_DEVICE) { + int rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } } if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) { diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 929170dcd3cb..600ba1202864 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -183,7 +183,7 @@ * cross a page boundy. */ #define SEGMENTX_LEN (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY) -#define VIRTX_LEN (sizeof(void *) * DC395x_MAX_SG_LISTENTRY) + struct SGentry { u32 address; /* bus! address */ @@ -235,7 +235,6 @@ struct ScsiReqBlk { u8 sg_count; /* No of HW sg entries for this request */ u8 sg_index; /* Index of HW sg entry for this request */ u32 total_xfer_length; /* Total number of bytes remaining to be transfered */ - void **virt_map; unsigned char *virt_addr; /* Virtual address of current transfer position */ /* @@ -1022,14 +1021,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb, reqlen, cmd->request_buffer, cmd->use_sg, srb->sg_count); + srb->virt_addr = page_address(sl->page); for (i = 0; i < srb->sg_count; i++) { - u32 seglen = (u32)sg_dma_len(sl + i); - sgp[i].address = (u32)sg_dma_address(sl + i); + u32 busaddr = (u32)sg_dma_address(&sl[i]); + u32 seglen = (u32)sl[i].length; + sgp[i].address = busaddr; sgp[i].length = seglen; srb->total_xfer_length += seglen; - srb->virt_map[i] = kmap(sl[i].page); } - srb->virt_addr = srb->virt_map[0]; sgp += srb->sg_count - 1; /* @@ -1976,7 +1975,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) int segment = cmd->use_sg; u32 xferred = srb->total_xfer_length - left; /* bytes transfered */ struct SGentry *psge = srb->segment_x + srb->sg_index; - void **virt = srb->virt_map; dprintkdbg(DBG_0, "sg_update_list: Transfered %i of %i bytes, %i remain\n", @@ -2016,16 +2014,16 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) /* We have to walk the scatterlist to find it */ sg = (struct scatterlist *)cmd->request_buffer; - idx = 0; while (segment--) { unsigned long mask = ~((unsigned long)sg->length - 1) & PAGE_MASK; if ((sg_dma_address(sg) & mask) == (psge->address & mask)) { - srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK); + srb->virt_addr = (page_address(sg->page) + + psge->address - + (psge->address & PAGE_MASK)); return; } ++sg; - ++idx; } dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n"); @@ -2151,7 +2149,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, DC395x_read32(acb, TRM_S1040_DMA_CXCNT)); } /* - * calculate all the residue data that not yet transfered + * calculate all the residue data that not yet tranfered * SCSI transfer counter + left in SCSI FIFO data * * .....TRM_S1040_SCSI_COUNTER (24bits) @@ -3269,7 +3267,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb) struct scsi_cmnd *cmd = srb->cmd; enum dma_data_direction dir = cmd->sc_data_direction; if (cmd->use_sg && dir != PCI_DMA_NONE) { - int i; /* unmap DC395x SG list */ dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n", srb->sg_bus_addr, SEGMENTX_LEN); @@ -3279,8 +3276,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb) dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n", cmd->use_sg, cmd->request_buffer); /* unmap the sg segments */ - for (i = 0; i < srb->sg_count; i++) - kunmap(virt_to_page(srb->virt_map[i])); pci_unmap_sg(acb->dev, (struct scatterlist *)cmd->request_buffer, cmd->use_sg, dir); @@ -3327,7 +3322,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, if (cmd->use_sg) { struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer; - ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset); + ptr = (struct ScsiInqData *)(page_address(sg->page) + sg->offset); } else { ptr = (struct ScsiInqData *)(cmd->request_buffer); } @@ -4262,9 +4257,8 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb) const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN; for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page) - kfree(acb->srb_array[i].segment_x); - - vfree(acb->srb_array[0].virt_map); + if (acb->srb_array[i].segment_x) + kfree(acb->srb_array[i].segment_x); } @@ -4280,12 +4274,9 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb) int srb_idx = 0; unsigned i = 0; struct SGentry *ptr; - void **virt_array; - for (i = 0; i < DC395x_MAX_SRB_CNT; i++) { + for (i = 0; i < DC395x_MAX_SRB_CNT; i++) acb->srb_array[i].segment_x = NULL; - acb->srb_array[i].virt_map = NULL; - } dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages); while (pages--) { @@ -4306,19 +4297,6 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb) ptr + (i * DC395x_MAX_SG_LISTENTRY); else dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n"); - - virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*)); - - if (!virt_array) { - adapter_sg_tables_free(acb); - return 1; - } - - for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) { - acb->srb_array[i].virt_map = virt_array; - virt_array += DC395x_MAX_SG_LISTENTRY; - } - return 0; } diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index e2370529c632..7235f94f1191 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -907,9 +907,13 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev raptorFlag = TRUE; } - + if (pci_request_regions(pDev, "dpt_i2o")) { + PERROR("dpti: adpt_config_hba: pci request region failed\n"); + return -EINVAL; + } base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size); if (!base_addr_virt) { + pci_release_regions(pDev); PERROR("dpti: adpt_config_hba: io remap failed\n"); return -EINVAL; } @@ -919,6 +923,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev if (!msg_addr_virt) { PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n"); iounmap(base_addr_virt); + pci_release_regions(pDev); return -EINVAL; } } else { @@ -932,6 +937,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev iounmap(msg_addr_virt); } iounmap(base_addr_virt); + pci_release_regions(pDev); return -ENOMEM; } memset(pHba, 0, sizeof(adpt_hba)); @@ -1027,6 +1033,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) up(&adpt_configuration_lock); iounmap(pHba->base_addr_virt); + pci_release_regions(pHba->pDev); if(pHba->msg_addr_virt != pHba->base_addr_virt){ iounmap(pHba->msg_addr_virt); } diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index fe09d145542a..2cb3c8340ca8 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1442,7 +1442,7 @@ static int ibmvscsi_remove(struct vio_dev *vdev) */ static struct vio_device_id ibmvscsi_device_table[] __devinitdata = { {"vscsi", "IBM,v-scsi"}, - {0,} + { "", "" } }; MODULE_DEVICE_TABLE(vio, ibmvscsi_device_table); diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 035f615817d7..8bf5652f1060 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -28,6 +28,7 @@ */ #include <asm/vio.h> +#include <asm/prom.h> #include <asm/iommu.h> #include <asm/hvcall.h> #include <linux/dma-mapping.h> diff --git a/drivers/scsi/ibmvscsi/srp.h b/drivers/scsi/ibmvscsi/srp.h index 2ae5154fd89c..7d8e4c4accb9 100644 --- a/drivers/scsi/ibmvscsi/srp.h +++ b/drivers/scsi/ibmvscsi/srp.h @@ -35,7 +35,7 @@ enum srp_types { SRP_LOGIN_REQ_TYPE = 0x00, SRP_LOGIN_RSP_TYPE = 0xC0, - SRP_LOGIN_REJ_TYPE = 0x80, + SRP_LOGIN_REJ_TYPE = 0xC2, SRP_I_LOGOUT_TYPE = 0x03, SRP_T_LOGOUT_TYPE = 0x80, SRP_TSK_MGMT_TYPE = 0x01, diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 6dfcb4fbccdd..4cdd891781b1 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -133,10 +133,12 @@ /* 6.10.00 - Remove 1G Addressing Limitations */ /* 6.11.xx - Get VersionInfo buffer off the stack ! DDTS 60401 */ /* 6.11.xx - Make Logical Drive Info structure safe for DMA DDTS 60639 */ -/* 7.10.xx - Add highmem_io flag in SCSI Templete for 2.4 kernels */ +/* 7.10.18 - Add highmem_io flag in SCSI Templete for 2.4 kernels */ /* - Fix path/name for scsi_hosts.h include for 2.6 kernels */ /* - Fix sort order of 7k */ /* - Remove 3 unused "inline" functions */ +/* 7.12.xx - Use STATIC functions whereever possible */ +/* - Clean up deprecated MODULE_PARM calls */ /*****************************************************************************/ /* @@ -207,8 +209,8 @@ module_param(ips, charp, 0); /* * DRIVER_VER */ -#define IPS_VERSION_HIGH "7.10" -#define IPS_VERSION_LOW ".18 " +#define IPS_VERSION_HIGH "7.12" +#define IPS_VERSION_LOW ".02 " #if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__) #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h index 480e06f4d6ae..505e967013de 100644 --- a/drivers/scsi/ips.h +++ b/drivers/scsi/ips.h @@ -87,15 +87,14 @@ #define scsi_set_pci_device(sh,dev) (0) #endif - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - - #ifndef irqreturn_t - typedef void irqreturn_t; - #endif - + #ifndef IRQ_NONE + typedef void irqreturn_t; #define IRQ_NONE #define IRQ_HANDLED #define IRQ_RETVAL(x) + #endif + + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) #define IPS_REGISTER_HOSTS(SHT) scsi_register_module(MODULE_SCSI_HA,SHT) #define IPS_UNREGISTER_HOSTS(SHT) scsi_unregister_module(MODULE_SCSI_HA,SHT) #define IPS_ADD_HOST(shost,device) @@ -123,6 +122,10 @@ #ifndef min #define min(x,y) ((x) < (y) ? x : y) #endif + + #ifndef __iomem /* For clean compiles in earlier kernels without __iomem annotations */ + #define __iomem + #endif #define pci_dma_hi32(a) ((a >> 16) >> 16) #define pci_dma_lo32(a) (a & 0xffffffff) @@ -1206,13 +1209,13 @@ typedef struct { #define IPS_VER_MAJOR 7 #define IPS_VER_MAJOR_STRING "7" -#define IPS_VER_MINOR 10 -#define IPS_VER_MINOR_STRING "10" -#define IPS_VER_BUILD 18 -#define IPS_VER_BUILD_STRING "18" -#define IPS_VER_STRING "7.10.18" +#define IPS_VER_MINOR 12 +#define IPS_VER_MINOR_STRING "12" +#define IPS_VER_BUILD 02 +#define IPS_VER_BUILD_STRING "02" +#define IPS_VER_STRING "7.12.02" #define IPS_RELEASE_ID 0x00020000 -#define IPS_BUILD_IDENT 731 +#define IPS_BUILD_IDENT 761 #define IPS_LEGALCOPYRIGHT_STRING "(C) Copyright IBM Corp. 1994, 2002. All Rights Reserved." #define IPS_ADAPTECCOPYRIGHT_STRING "(c) Copyright Adaptec, Inc. 2002 to 2004. All Rights Reserved." #define IPS_DELLCOPYRIGHT_STRING "(c) Copyright Dell 2004. All Rights Reserved." @@ -1223,12 +1226,12 @@ typedef struct { #define IPS_VER_SERVERAID2 "2.88.13" #define IPS_VER_NAVAJO "2.88.13" #define IPS_VER_SERVERAID3 "6.10.24" -#define IPS_VER_SERVERAID4H "7.10.11" -#define IPS_VER_SERVERAID4MLx "7.10.18" -#define IPS_VER_SARASOTA "7.10.18" -#define IPS_VER_MARCO "7.10.18" -#define IPS_VER_SEBRING "7.10.18" -#define IPS_VER_KEYWEST "7.10.18" +#define IPS_VER_SERVERAID4H "7.12.02" +#define IPS_VER_SERVERAID4MLx "7.12.02" +#define IPS_VER_SARASOTA "7.12.02" +#define IPS_VER_MARCO "7.12.02" +#define IPS_VER_SEBRING "7.12.02" +#define IPS_VER_KEYWEST "7.12.02" /* Compatability IDs for various adapters */ #define IPS_COMPAT_UNKNOWN "" diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 73b1f72b7e43..dee4b12b0342 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1,25 +1,35 @@ /* - libata-core.c - helper library for ATA - - Copyright 2003-2004 Red Hat, Inc. All rights reserved. - Copyright 2003-2004 Jeff Garzik - - The contents of this file are subject to the Open - Software License version 1.1 that can be found at - http://www.opensource.org/licenses/osl-1.1.txt and is included herein - by reference. - - Alternatively, the contents of this file may be used under the terms - of the GNU General Public License version 2 (the "GPL") as distributed - in the kernel source COPYING file, in which case the provisions of - the GPL are applicable instead of the above. If you wish to allow - the use of your version of this file only under the terms of the - GPL and not to allow others to use your version of this file under - the OSL, indicate your decision by deleting the provisions above and - replace them with the notice and other provisions required by the GPL. - If you do not delete the provisions above, a recipient may use your - version of this file under either the OSL or the GPL. - + * libata-core.c - helper library for ATA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * */ #include <linux/config.h> @@ -1304,12 +1314,12 @@ static inline u8 ata_dev_knobble(struct ata_port *ap) /** * ata_dev_config - Run device specific handlers and check for * SATA->PATA bridges - * @ap: Bus + * @ap: Bus * @i: Device * * LOCKING: */ - + void ata_dev_config(struct ata_port *ap, unsigned int i) { /* limit bridge transfers to udma5, 200 sectors */ @@ -2268,19 +2278,6 @@ void ata_qc_prep(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ - - -/** - * ata_sg_init_one - Prepare a one-entry scatter-gather list. - * @qc: Queued command - * @buf: transfer buffer - * @buflen: length of buf - * - * Builds a single-entry scatter-gather list to initiate a - * transfer utilizing the specified buffer. - * - * LOCKING: - */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2312,18 +2309,6 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * spin_lock_irqsave(host_set lock) */ - -/** - * ata_sg_init - Assign a scatter gather list to a queued command - * @qc: Queued command - * @sg: Scatter-gather list - * @n_elem: length of sg list - * - * Attaches a scatter-gather list to a queued command. - * - * LOCKING: - */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2402,6 +2387,27 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) } /** + * ata_poll_qc_complete - turn irq back on and finish qc + * @qc: Command to complete + * @drv_stat: ATA status register content + * + * LOCKING: + * None. (grabs host lock) + */ + +void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_irq_on(ap); + ata_qc_complete(qc, drv_stat); + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + +/** * ata_pio_poll - * @ap: * @@ -2463,11 +2469,10 @@ static void ata_pio_complete (struct ata_port *ap) u8 drv_stat; /* - * This is purely hueristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, fall back to + * This is purely heuristic. This is a fast path. Sometimes when + * we enter, BSY will be cleared in a chk-status or two. If not, + * the drive is probably seeking or something. Snooze for a couple + * msecs, then chk-status again. If still busy, fall back to * PIO_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); @@ -2492,9 +2497,7 @@ static void ata_pio_complete (struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat); + ata_poll_qc_complete(qc, drv_stat); } @@ -2519,6 +2522,20 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } +/** + * ata_mmio_data_xfer - Transfer data by MMIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by MMIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { @@ -2527,6 +2544,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, u16 *buf16 = (u16 *) buf; void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; + /* Transfer multiple of 2 bytes */ if (write_data) { for (i = 0; i < words; i++) writew(le16_to_cpu(buf16[i]), mmio); @@ -2534,19 +2552,76 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, for (i = 0; i < words; i++) buf16[i] = cpu_to_le16(readw(mmio)); } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), mmio); + } else { + align_buf[0] = cpu_to_le16(readw(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_pio_data_xfer - Transfer data by PIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { - unsigned int dwords = buflen >> 1; + unsigned int words = buflen >> 1; + /* Transfer multiple of 2 bytes */ if (write_data) - outsw(ap->ioaddr.data_addr, buf, dwords); + outsw(ap->ioaddr.data_addr, buf, words); else - insw(ap->ioaddr.data_addr, buf, dwords); + insw(ap->ioaddr.data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); + } else { + align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_data_xfer - Transfer data from/to the data register. + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int do_write) { @@ -2556,6 +2631,16 @@ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, ata_pio_data_xfer(ap, buf, buflen, do_write); } +/** + * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * @qc: Command on going + * + * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ + static void ata_pio_sector(struct ata_queued_cmd *qc) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2594,6 +2679,18 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) kunmap(page); } +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2603,10 +2700,33 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned char *buf; unsigned int offset, count; - if (qc->curbytes == qc->nbytes - bytes) + if (qc->curbytes + bytes >= qc->nbytes) ap->pio_task_state = PIO_ST_LAST; next_sg: + if (unlikely(qc->cursg >= qc->n_elem)) { + /* + * The end of qc->sg is reached and the device expects + * more data to transfer. In order not to overrun qc->sg + * and fulfill length specified in the byte count register, + * - for read case, discard trailing data from the device + * - for write case, padding zero data to the device + */ + u16 pad_buf[1] = { 0 }; + unsigned int words = bytes >> 1; + unsigned int i; + + if (words) /* warning if bytes > 1 */ + printk(KERN_WARNING "ata%u: %u bytes trailing data\n", + ap->id, bytes); + + for (i = 0; i < words; i++) + ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); + + ap->pio_task_state = PIO_ST_LAST; + return; + } + sg = &qc->sg[qc->cursg]; page = sg->page; @@ -2640,11 +2760,21 @@ next_sg: kunmap(page); - if (bytes) { + if (bytes) goto next_sg; - } } +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void atapi_pio_bytes(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -2717,9 +2847,7 @@ static void ata_pio_block(struct ata_port *ap) if ((status & ATA_DRQ) == 0) { ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, status); + ata_poll_qc_complete(qc, status); return; } @@ -2749,9 +2877,7 @@ static void ata_pio_error(struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat | ATA_ERR); + ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } static void ata_pio_task(void *_data) @@ -2857,8 +2983,10 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; struct ata_device *dev = qc->dev; u8 host_stat = 0, drv_stat; + unsigned long flags; DPRINTK("ENTER\n"); @@ -2869,7 +2997,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) { /* finish completing original command */ + spin_lock_irqsave(&host_set->lock, flags); __ata_qc_complete(qc); + spin_unlock_irqrestore(&host_set->lock, flags); atapi_request_sense(ap, dev, cmd); @@ -2880,6 +3010,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) } } + spin_lock_irqsave(&host_set->lock, flags); + /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. * libata is the only user of ->eh_strategy_handler() in @@ -2895,7 +3027,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) host_stat = ap->ops->bmdma_status(ap); /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ @@ -2913,6 +3045,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ata_qc_complete(qc, drv_stat); break; } + + spin_unlock_irqrestore(&host_set->lock, flags); + out: DPRINTK("EXIT\n"); } @@ -3086,9 +3221,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); - qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately @@ -3218,11 +3358,13 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_NODATA: + ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host_nolock(ap, &qc->tf); queue_work(ata_wq, &ap->packet_task); break; case ATA_PROT_ATAPI_DMA: + ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ queue_work(ata_wq, &ap->packet_task); @@ -3267,7 +3409,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) } /** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3438,7 +3580,7 @@ u8 ata_bmdma_status(struct ata_port *ap) /** * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @ap: Port associated with this ATA transaction. + * @qc: Command we are ending DMA for * * Clears the ATA_DMA_START flag in the dma control register * @@ -3448,8 +3590,9 @@ u8 ata_bmdma_status(struct ata_port *ap) * spin_lock_irqsave(host_set lock) */ -void ata_bmdma_stop(struct ata_port *ap) +void ata_bmdma_stop(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; if (ap->flags & ATA_FLAG_MMIO) { void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; @@ -3501,7 +3644,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, goto idle_irq; /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ @@ -3576,7 +3719,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -3628,19 +3772,27 @@ static void atapi_packet_task(void *_data) /* send SCSI cdb */ DPRINTK("send cdb\n"); assert(ap->cdb_len >= 12); - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* if we are DMA'ing, irq handler takes over from here */ - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; - /* non-data commands are also handled via irq */ - else if (qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - /* do nothing */ - } + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* PIO commands are handled by polling */ - else { + /* PIO commands are handled by polling */ ap->pio_task_state = PIO_ST; queue_work(ata_wq, &ap->pio_task); } @@ -3648,7 +3800,7 @@ static void atapi_packet_task(void *_data) return; err_out: - ata_qc_complete(qc, ATA_ERR); + ata_poll_qc_complete(qc, ATA_ERR); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 794fb559efb0..346eb36b1e31 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1,25 +1,36 @@ /* - libata-scsi.c - helper library for ATA - - Copyright 2003-2004 Red Hat, Inc. All rights reserved. - Copyright 2003-2004 Jeff Garzik - - The contents of this file are subject to the Open - Software License version 1.1 that can be found at - http://www.opensource.org/licenses/osl-1.1.txt and is included herein - by reference. - - Alternatively, the contents of this file may be used under the terms - of the GNU General Public License version 2 (the "GPL") as distributed - in the kernel source COPYING file, in which case the provisions of - the GPL are applicable instead of the above. If you wish to allow - the use of your version of this file only under the terms of the - GPL and not to allow others to use your version of this file under - the OSL, indicate your decision by deleting the provisions above and - replace them with the notice and other provisions required by the GPL. - If you do not delete the provisions above, a recipient may use your - version of this file under either the OSL or the GPL. - + * libata-scsi.c - helper library for ATA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from + * - http://www.t10.org/ + * - http://www.t13.org/ + * */ #include <linux/kernel.h> @@ -385,12 +396,67 @@ int ata_scsi_error(struct Scsi_Host *host) * appropriate place */ host->host_failed--; + INIT_LIST_HEAD(&host->eh_cmd_q); DPRINTK("EXIT\n"); return 0; } /** + * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY + * (to start). Perhaps these commands should be preceded by + * CHECK POWER MODE to see what power mode the device is already in. + * [See SAT revision 5 at www.t10.org] + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, + u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + if (scsicmd[1] & 0x1) { + ; /* ignore IMMED bit, violates sat-r05 */ + } + if (scsicmd[4] & 0x2) + return 1; /* LOEJ bit set not supported */ + if (((scsicmd[4] >> 4) & 0xf) != 0) + return 1; /* power conditions not supported */ + if (scsicmd[4] & 0x1) { + tf->nsect = 1; /* 1 sector, lba=0 */ + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ + } else { + tf->nsect = 0; /* time period value (0 implies now) */ + tf->command = ATA_CMD_STANDBY; + /* Consider: ATA STANDBY IMMEDIATE command */ + } + /* + * Standby and Idle condition timers could be implemented but that + * would require libata to implement the Power condition mode page + * and allow the user to change it. Changing mode pages requires + * MODE SELECT to be implemented. + */ + + return 0; +} + + +/** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate (ignored) @@ -575,11 +641,19 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->lbah = scsicmd[3]; VPRINTK("ten-byte command\n"); + if (qc->nsect == 0) /* we don't support length==0 cmds */ + return 1; return 0; } if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { qc->nsect = tf->nsect = scsicmd[4]; + if (!qc->nsect) { + qc->nsect = 256; + if (lba48) + tf->hob_nsect = 1; + } + tf->lbal = scsicmd[3]; tf->lbam = scsicmd[2]; tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ @@ -619,6 +693,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->lbah = scsicmd[7]; VPRINTK("sixteen-byte command\n"); + if (qc->nsect == 0) /* we don't support length==0 cmds */ + return 1; return 0; } @@ -1434,6 +1510,8 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; + case START_STOP: + return ata_scsi_start_stop_xlat; } return NULL; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d90430bbb0de..809c634afbcd 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -1,32 +1,35 @@ /* - libata.h - helper library for ATA - - Copyright 2003-2004 Red Hat, Inc. All rights reserved. - Copyright 2003-2004 Jeff Garzik - - The contents of this file are subject to the Open - Software License version 1.1 that can be found at - http://www.opensource.org/licenses/osl-1.1.txt and is included herein - by reference. - - Alternatively, the contents of this file may be used under the terms - of the GNU General Public License version 2 (the "GPL") as distributed - in the kernel source COPYING file, in which case the provisions of - the GPL are applicable instead of the above. If you wish to allow - the use of your version of this file only under the terms of the - GPL and not to allow others to use your version of this file under - the OSL, indicate your decision by deleting the provisions above and - replace them with the notice and other provisions required by the GPL. - If you do not delete the provisions above, a recipient may use your - version of this file under either the OSL or the GPL. - + * libata.h - helper library for ATA + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * */ #ifndef __LIBATA_H__ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.11" /* must be exactly four chars */ +#define DRV_VERSION "1.12" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; @@ -72,7 +75,7 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); -extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, +extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index b0403ccd8a25..03d9bc6e69df 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -4,21 +4,37 @@ * Copyright 2004 NVIDIA Corp. All rights reserved. * Copyright 2004 Andrew Chew * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * No hardware documentation available outside of NVIDIA. + * This driver programs the NVIDIA SATA controller in a similar + * fashion as with other PCI IDE BMDMA controllers, with a few + * NV-specific details such as register offsets, SATA phy location, + * hotplug info, etc. + * + * + * 0.08 + * - Added support for MCP51 and MCP55. + * + * 0.07 + * - Added support for RAID class code. * * 0.06 * - Added generic SATA support by using a pci_device_id that filters on @@ -48,7 +64,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_nv" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.8" #define NV_PORTS 2 #define NV_PIO_MASK 0x1f @@ -116,7 +132,9 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804 + CK804, + MCP51, + MCP55 }; static struct pci_device_id nv_pci_tbl[] = { @@ -134,9 +152,18 @@ static struct pci_device_id nv_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, { 0, } /* terminate list */ }; @@ -274,7 +301,8 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 5c1d4411457a..7c4f6ecc1cc9 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -7,21 +7,26 @@ * * Copyright 2003-2004 Red Hat, Inc. * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. * */ @@ -40,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.02" enum { @@ -79,7 +84,8 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r static void pdc_eng_timeout(struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc_port_stop(struct ata_port *ap); -static void pdc_phy_reset(struct ata_port *ap); +static void pdc_pata_phy_reset(struct ata_port *ap); +static void pdc_sata_phy_reset(struct ata_port *ap); static void pdc_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); @@ -106,19 +112,22 @@ static Scsi_Host_Template pdc_ata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_ata_ops = { +static struct ata_port_operations pdc_sata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = pdc_exec_command_mmio, .dev_select = ata_std_dev_select, - .phy_reset = pdc_phy_reset, + + .phy_reset = pdc_sata_phy_reset, + .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, .eng_timeout = pdc_eng_timeout, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, + .scr_read = pdc_sata_scr_read, .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, @@ -126,6 +135,27 @@ static struct ata_port_operations pdc_ata_ops = { .host_stop = ata_host_stop, }; +static struct ata_port_operations pdc_pata_ops = { + .port_disable = ata_port_disable, + .tf_load = pdc_tf_load_mmio, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = pdc_exec_command_mmio, + .dev_select = ata_std_dev_select, + + .phy_reset = pdc_pata_phy_reset, + + .qc_prep = pdc_qc_prep, + .qc_issue = pdc_qc_issue_prot, + .eng_timeout = pdc_eng_timeout, + .irq_handler = pdc_interrupt, + .irq_clear = pdc_irq_clear, + + .port_start = pdc_port_start, + .port_stop = pdc_port_stop, + .host_stop = ata_host_stop, +}; + static struct ata_port_info pdc_port_info[] = { /* board_2037x */ { @@ -135,7 +165,7 @@ static struct ata_port_info pdc_port_info[] = { .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_ata_ops, + .port_ops = &pdc_sata_ops, }, /* board_20319 */ @@ -146,7 +176,7 @@ static struct ata_port_info pdc_port_info[] = { .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_ata_ops, + .port_ops = &pdc_sata_ops, }, /* board_20619 */ @@ -157,7 +187,7 @@ static struct ata_port_info pdc_port_info[] = { .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_ata_ops, + .port_ops = &pdc_pata_ops, }, }; @@ -181,6 +211,10 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, @@ -268,12 +302,23 @@ static void pdc_reset_port(struct ata_port *ap) readl(mmio); /* flush */ } -static void pdc_phy_reset(struct ata_port *ap) +static void pdc_sata_phy_reset(struct ata_port *ap) { pdc_reset_port(ap); sata_phy_reset(ap); } +static void pdc_pata_phy_reset(struct ata_port *ap) +{ + /* FIXME: add cable detect. Don't assume 40-pin cable */ + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; + + pdc_reset_port(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) @@ -321,11 +366,15 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) static void pdc_eng_timeout(struct ata_port *ap) { + struct ata_host_set *host_set = ap->host_set; u8 drv_stat; struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -359,6 +408,7 @@ static void pdc_eng_timeout(struct ata_port *ap) } out: + spin_unlock_irqrestore(&host_set->lock, flags); DPRINTK("EXIT\n"); } @@ -441,7 +491,8 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("port %u\n", i); ap = host_set->ports[i]; tmp = mask & (1 << (i + 1)); - if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (tmp && ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_promise.h b/drivers/scsi/sata_promise.h index 6e7e96b9ee13..6ee5e190262d 100644 --- a/drivers/scsi/sata_promise.h +++ b/drivers/scsi/sata_promise.h @@ -3,21 +3,24 @@ * * Copyright 2003-2004 Red Hat, Inc. * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* * */ diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 1383e8a28d72..9c99ab433bd3 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -6,21 +6,24 @@ * Copyright 2005 Pacific Digital Corporation. * (OSL/GPL code release authorized by Jalil Fadavi). * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* * */ @@ -117,7 +120,7 @@ static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); static int qs_qc_issue(struct ata_queued_cmd *qc); static int qs_check_atapi_dma(struct ata_queued_cmd *qc); -static void qs_bmdma_stop(struct ata_port *ap); +static void qs_bmdma_stop(struct ata_queued_cmd *qc); static u8 qs_bmdma_status(struct ata_port *ap); static void qs_irq_clear(struct ata_port *ap); static void qs_eng_timeout(struct ata_port *ap); @@ -198,7 +201,7 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc) return 1; /* ATAPI DMA not supported */ } -static void qs_bmdma_stop(struct ata_port *ap) +static void qs_bmdma_stop(struct ata_queued_cmd *qc) { /* nothing */ } @@ -386,7 +389,8 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); handled = 1; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && !(ap->flags & + (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) @@ -417,7 +421,8 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) for (port_no = 0; port_no < host_set->n_ports; ++port_no) { struct ata_port *ap; ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) @@ -431,7 +436,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", ap->id, qc->tf.protocol, status); - + /* complete taskfile transaction */ pp->state = qs_state_idle; ata_qc_complete(qc, status); diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 49ed557a4b66..71d49548f0a3 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -5,24 +5,32 @@ * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * - * Copyright 2003 Red Hat, Inc. + * Copyright 2003-2005 Red Hat, Inc. * Copyright 2003 Benjamin Herrenschmidt * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. * */ @@ -41,8 +49,11 @@ #define DRV_VERSION "0.9" enum { + SIL_FLAG_MOD15WRITE = (1 << 30), + sil_3112 = 0, - sil_3114 = 1, + sil_3112_m15w = 1, + sil_3114 = 2, SIL_FIFO_R0 = 0x40, SIL_FIFO_W0 = 0x41, @@ -76,13 +87,13 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); static struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { } /* terminate list */ }; @@ -174,6 +185,16 @@ static struct ata_port_info sil_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ .port_ops = &sil_ops, + }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */ + { + .sht = &sil_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO | + SIL_FLAG_MOD15WRITE, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, }, /* sil_3114 */ { .sht = &sil_sht, @@ -323,15 +344,15 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) while ((len > 0) && (s[len - 1] == ' ')) len--; - for (n = 0; sil_blacklist[n].product; n++) + for (n = 0; sil_blacklist[n].product; n++) if (!memcmp(sil_blacklist[n].product, s, strlen(sil_blacklist[n].product))) { quirks = sil_blacklist[n].quirk; break; } - + /* limit requests to 15 sectors */ - if (quirks & SIL_QUIRK_MOD15WRITE) { + if ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE)) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", ap->id, dev->devno); ap->host->max_sectors = 15; diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index e418b89c6b9d..43af445b3ad2 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -7,21 +7,26 @@ * * Copyright 2004 Uwe Koziolek * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. * */ @@ -234,7 +239,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_dword(pdev, SIS_GENCTL, &genctl); if ((genctl & GENCTL_IOMAPPED_SCR) == 0) probe_ent->host_flags |= SIS_FLAG_CFGSCR; - + /* if hardware thinks SCRs are in IO space, but there are * no IO resources assigned, change to PCI cfg space. */ diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 858e07185dbd..19d3bb3b0fb6 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -13,21 +13,26 @@ * This driver probably works with non-Apple versions of the * Broadcom chipset... * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. * */ @@ -195,18 +200,18 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = readb(mmio + ATA_DMA_CMD); writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the + /* There is a race condition in certain SATA controllers that can + be seen when the r/w command is given to the controller before the host DMA is started. On a Read command, the controller would initiate the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request + are very fast drives connected to the controller, or when the data request hits in the drive cache, there is the possibility that the drive returns a part or all of the requested data to the controller before the DMA start is issued. In this case, the controller would become confused as to what to do with the data. In the worst case when all the data is returned back to the controller, the controller could hang. In other cases it could return partial data returning in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a + on an system with very fast disks, where the SATA controller is sitting behind a number of bridges, and hence there is significant latency between the r/w command and the start command. */ /* issue r/w command if the access is to ATA*/ @@ -214,7 +219,7 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) ap->ops->exec_command(ap, &qc->tf); } - + static u8 k2_stat_check_status(struct ata_port *ap) { return readl((void *) ap->ioaddr.status_addr); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 140cea05de3f..c72fcc46f0fa 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -7,21 +7,26 @@ * * Copyright 2003-2004 Red Hat, Inc. * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. * */ @@ -94,7 +99,7 @@ enum { PDC_DIMM1_CONTROL_OFFSET = 0x84, PDC_SDRAM_CONTROL_OFFSET = 0x88, PDC_I2C_WRITE = 0x00000000, - PDC_I2C_READ = 0x00000040, + PDC_I2C_READ = 0x00000040, PDC_I2C_START = 0x00000080, PDC_I2C_MASK_INT = 0x00000020, PDC_I2C_COMPLETE = 0x00010000, @@ -105,16 +110,16 @@ enum { PDC_DIMM_SPD_COLUMN_NUM = 4, PDC_DIMM_SPD_MODULE_ROW = 5, PDC_DIMM_SPD_TYPE = 11, - PDC_DIMM_SPD_FRESH_RATE = 12, - PDC_DIMM_SPD_BANK_NUM = 17, + PDC_DIMM_SPD_FRESH_RATE = 12, + PDC_DIMM_SPD_BANK_NUM = 17, PDC_DIMM_SPD_CAS_LATENCY = 18, - PDC_DIMM_SPD_ATTRIBUTE = 21, + PDC_DIMM_SPD_ATTRIBUTE = 21, PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, - PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, + PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, PDC_DIMM_SPD_RAS_CAS_DELAY = 29, PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, PDC_DIMM_SPD_SYSTEM_FREQ = 126, - PDC_CTL_STATUS = 0x08, + PDC_CTL_STATUS = 0x08, PDC_DIMM_WINDOW_CTLR = 0x0C, PDC_TIME_CONTROL = 0x3C, PDC_TIME_PERIOD = 0x40, @@ -157,15 +162,15 @@ static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); static void pdc20621_host_stop(struct ata_host_set *host_set); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, u32 subaddr, u32 *pdata); static int pdc20621_prog_dimm0(struct ata_probe_ent *pe); static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe); #ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); #endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); @@ -468,7 +473,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) for (i = 0; i < last; i++) { buf[idx++] = cpu_to_le32(sg_dma_address(&sg[i])); buf[idx++] = cpu_to_le32(sg_dma_len(&sg[i])); - total_len += sg[i].length; + total_len += sg_dma_len(&sg[i]); } buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT); sgt_len = idx * 4; @@ -825,7 +830,8 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re ap = host_set->ports[port_no]; tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); - if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (tmp && ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -847,10 +853,14 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re static void pdc_eng_timeout(struct ata_port *ap) { u8 drv_stat; + struct ata_host_set *host_set = ap->host_set; struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -884,6 +894,7 @@ static void pdc_eng_timeout(struct ata_port *ap) } out: + spin_unlock_irqrestore(&host_set->lock, flags); DPRINTK("EXIT\n"); } @@ -922,7 +933,7 @@ static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base) #ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size) { u32 window_size; @@ -936,9 +947,9 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -947,19 +958,19 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, offset -= (idx * window_size); idx++; - dist = ((long) (window_size - (offset + size))) >= 0 ? size : + dist = ((long) (window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), + memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), dist); - psource += dist; + psource += dist; size -= dist; for (; (long) size >= (long) window_size ;) { writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), + memcpy_fromio((char *) psource, (char *) (dimm_mmio), window_size / 4); psource += window_size; size -= window_size; @@ -971,14 +982,14 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, readl(mmio + PDC_GENERAL_CTLR); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), + memcpy_fromio((char *) psource, (char *) (dimm_mmio), size / 4); } } #endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size) { u32 window_size; @@ -989,16 +1000,16 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, struct pdc_host_priv *hpriv = pe->private_data; void *dimm_mmio = hpriv->dimm_mmio; - /* hard-code chip #0 */ + /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ idx = (u16) (offset / window_size); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - offset -= (idx * window_size); + offset -= (idx * window_size); idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); @@ -1006,12 +1017,12 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); - psource += dist; + psource += dist; size -= dist; for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, + memcpy_toio((char *) (dimm_mmio), (char *) psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1019,7 +1030,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, size -= window_size; idx ++; } - + if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); @@ -1030,12 +1041,12 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, } -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, u32 subaddr, u32 *pdata) { void *mmio = pe->mmio_base; u32 i2creg = 0; - u32 status; + u32 status; u32 count =0; /* hard-code chip #0 */ @@ -1049,7 +1060,7 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); /* Write Control to perform read operation, mask int */ - writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, + writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, mmio + PDC_I2C_CONTROL_OFFSET); for (count = 0; count <= 1000; count ++) { @@ -1062,26 +1073,26 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, } *pdata = (status >> 8) & 0x000000ff; - return 1; + return 1; } static int pdc20621_detect_dimm(struct ata_probe_ent *pe) { u32 data=0 ; - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { if (data == 100) return 100; } else return 0; - + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { - if(data <= 0x75) + if(data <= 0x75) return 133; } else return 0; - + return 0; } @@ -1091,15 +1102,15 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) u32 spd0[50]; u32 data = 0; int size, i; - u8 bdimmsize; + u8 bdimmsize; void *mmio = pe->mmio_base; static const struct { unsigned int reg; unsigned int ofs; } pdc_i2c_read_data [] = { - { PDC_DIMM_SPD_TYPE, 11 }, + { PDC_DIMM_SPD_TYPE, 11 }, { PDC_DIMM_SPD_FRESH_RATE, 12 }, - { PDC_DIMM_SPD_COLUMN_NUM, 4 }, + { PDC_DIMM_SPD_COLUMN_NUM, 4 }, { PDC_DIMM_SPD_ATTRIBUTE, 21 }, { PDC_DIMM_SPD_ROW_NUM, 3 }, { PDC_DIMM_SPD_BANK_NUM, 17 }, @@ -1108,7 +1119,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, - { PDC_DIMM_SPD_CAS_LATENCY, 18 }, + { PDC_DIMM_SPD_CAS_LATENCY, 18 }, }; /* hard-code chip #0 */ @@ -1116,17 +1127,17 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++) pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - pdc_i2c_read_data[i].reg, + pdc_i2c_read_data[i].reg, &spd0[pdc_i2c_read_data[i].ofs]); - + data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4); - data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) | + data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) | ((((spd0[27] + 9) / 10) - 1) << 8) ; - data |= (((((spd0[29] > spd0[28]) - ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; + data |= (((((spd0[29] > spd0[28]) + ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; - - if (spd0[18] & 0x08) + + if (spd0[18] & 0x08) data |= ((0x03) << 14); else if (spd0[18] & 0x04) data |= ((0x02) << 14); @@ -1135,7 +1146,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) else data |= (0 << 14); - /* + /* Calculate the size of bDIMMSize (power of 2) and merge the DIMM size by program start/end address. */ @@ -1145,9 +1156,9 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) data |= (((size / 16) - 1) << 16); data |= (0 << 23); data |= 8; - writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); + writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); readl(mmio + PDC_DIMM0_CONTROL_OFFSET); - return size; + return size; } @@ -1167,12 +1178,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) Refresh Enable (bit 17) */ - data = 0x022259F1; + data = 0x022259F1; writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); readl(mmio + PDC_SDRAM_CONTROL_OFFSET); /* Turn on for ECC */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { data |= (0x01 << 16); @@ -1186,22 +1197,22 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) data |= (1<<19); writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - error = 1; + error = 1; for (i = 1; i <= 10; i++) { /* polling ~5 secs */ data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); if (!(data & (1<<19))) { error = 0; - break; + break; } msleep(i*100); } return error; } - + static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) { - int speed, size, length; + int speed, size, length; u32 addr,spd0,pci_status; u32 tmp=0; u32 time_period=0; @@ -1228,7 +1239,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) /* Wait 3 seconds */ msleep(3000); - /* + /* When timer is enabled, counter is decreased every internal clock cycle. */ @@ -1236,24 +1247,24 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) tcount = readl(mmio + PDC_TIME_COUNTER); VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); - /* + /* If SX4 is on PCI-X bus, after 3 seconds, the timer counter register should be >= (0xffffffff - 3x10^8). */ if(tcount >= PCI_X_TCOUNT) { ticks = (time_period - tcount); VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); - + clock = (ticks / 300000); VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); - + clock = (clock * 33); VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); /* PLL F Param (bit 22:16) */ fparam = (1400000 / clock) - 2; VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); - + /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ pci_status = (0x8a001824 | (fparam << 16)); } else @@ -1264,21 +1275,21 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) writel(pci_status, mmio + PDC_CTL_STATUS); readl(mmio + PDC_CTL_STATUS); - /* + /* Read SPD of DIMM by I2C interface, and program the DIMM Module Controller. */ if (!(speed = pdc20621_detect_dimm(pe))) { - printk(KERN_ERR "Detect Local DIMM Fail\n"); + printk(KERN_ERR "Detect Local DIMM Fail\n"); return 1; /* DIMM error */ } VPRINTK("Local DIMM Speed = %d\n", speed); - /* Programming DIMM0 Module Control Register (index_CID0:80h) */ + /* Programming DIMM0 Module Control Register (index_CID0:80h) */ size = pdc20621_prog_dimm0(pe); VPRINTK("Local DIMM Size = %dMB\n",size); - /* Programming DIMM Module Global Control Register (index_CID0:88h) */ + /* Programming DIMM Module Global Control Register (index_CID0:88h) */ if (pdc20621_prog_dimm_global(pe)) { printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); return 1; @@ -1297,30 +1308,30 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40); pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, + pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40); pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); } #endif /* ECC initiliazation. */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { VPRINTK("Start ECC initialization\n"); addr = 0; length = size * 1024 * 1024; while (addr < length) { - pdc20621_put_to_dimm(pe, (void *) &tmp, addr, + pdc20621_put_to_dimm(pe, (void *) &tmp, addr, sizeof(u32)); addr += sizeof(u32); } diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index a71fb54eebd3..1566886815fb 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -1,21 +1,26 @@ /* * sata_uli.c - ULi Electronics SATA * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. * */ @@ -214,7 +219,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; goto err_out_regions; } - + switch (board_idx) { case uli_5287: probe_ent->port[0].scr_addr = ULI5287_BASE; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index f43183c19a12..128b996b07b7 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -1,34 +1,38 @@ /* - sata_via.c - VIA Serial ATA controllers - - Maintained by: Jeff Garzik <jgarzik@pobox.com> - Please ALWAYS copy linux-ide@vger.kernel.org + * sata_via.c - VIA Serial ATA controllers + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org on emails. - - Copyright 2003-2004 Red Hat, Inc. All rights reserved. - Copyright 2003-2004 Jeff Garzik - - The contents of this file are subject to the Open - Software License version 1.1 that can be found at - http://www.opensource.org/licenses/osl-1.1.txt and is included herein - by reference. - - Alternatively, the contents of this file may be used under the terms - of the GNU General Public License version 2 (the "GPL") as distributed - in the kernel source COPYING file, in which case the provisions of - the GPL are applicable instead of the above. If you wish to allow - the use of your version of this file only under the terms of the - GPL and not to allow others to use your version of this file under - the OSL, indicate your decision by deleting the provisions above and - replace them with the notice and other provisions required by the GPL. - If you do not delete the provisions above, a recipient may use your - version of this file under either the OSL or the GPL. - - ---------------------------------------------------------------------- - - To-do list: - * VT6421 PATA support - + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + * + * To-do list: + * - VT6421 PATA support + * */ #include <linux/kernel.h> @@ -347,7 +351,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent = vt6420_init_probe_ent(pdev); else probe_ent = vt6421_init_probe_ent(pdev); - + if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", pci_name(pdev)); diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index c5e09dc6f3de..3985f344da4d 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -9,9 +9,29 @@ * * Bits from Jeff Garzik, Copyright RedHat, Inc. * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Vitesse hardware documentation presumably available under NDA. + * Intel 31244 (same hardware interface) documentation presumably + * available from http://developer.intel.com/ + * */ #include <linux/kernel.h> @@ -173,7 +193,8 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && !(ap->flags & + (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -342,7 +363,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d pci_set_master(pdev); - /* + /* * Config offset 0x98 is "Extended Control and Status Register 0" * Default value is (1 << 28). All bits except bit 28 are reserved in * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 2d3c4ac475f2..48edd67982a5 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -336,9 +336,23 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, unsigned long flags; const int size = sizeof(struct scsi_target) + shost->transportt->target_size; - struct scsi_target *starget = kmalloc(size, GFP_ATOMIC); + struct scsi_target *starget; struct scsi_target *found_target; + /* + * Obtain the real parent from the transport. The transport + * is allowed to fail (no error) if there is nothing at that + * target id. + */ + if (shost->transportt->target_parent) { + spin_lock_irqsave(shost->host_lock, flags); + parent = shost->transportt->target_parent(shost, channel, id); + spin_unlock_irqrestore(shost->host_lock, flags); + if (!parent) + return NULL; + } + + starget = kmalloc(size, GFP_KERNEL); if (!starget) { printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__); return NULL; diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 35d1c1e8e345..e6412fce423c 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -1022,6 +1022,23 @@ static int fc_rport_match(struct attribute_container *cont, return &i->rport_attr_cont.ac == cont; } + +/* + * Must be called with shost->host_lock held + */ +static struct device *fc_target_parent(struct Scsi_Host *shost, + int channel, uint id) +{ + struct fc_rport *rport; + + list_for_each_entry(rport, &fc_host_rports(shost), peers) + if ((rport->channel == channel) && + (rport->scsi_target_id == id)) + return &rport->dev; + + return NULL; +} + struct scsi_transport_template * fc_attach_transport(struct fc_function_template *ft) { @@ -1057,6 +1074,8 @@ fc_attach_transport(struct fc_function_template *ft) /* Transport uses the shost workq for scsi scanning */ i->t.create_work_queue = 1; + + i->t.target_parent = fc_target_parent; /* * Setup SCSI Target Attributes. diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 51292f269ce5..e822ca0e97cf 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2971,23 +2971,22 @@ static void * dev_seq_start(struct seq_file *s, loff_t *pos) { struct sg_proc_deviter * it = kmalloc(sizeof(*it), GFP_KERNEL); + s->private = it; if (! it) return NULL; + if (NULL == sg_dev_arr) - goto err1; + return NULL; it->index = *pos; it->max = sg_last_dev(); if (it->index >= it->max) - goto err1; + return NULL; return it; -err1: - kfree(it); - return NULL; } static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; + struct sg_proc_deviter * it = s->private; *pos = ++it->index; return (it->index < it->max) ? it : NULL; @@ -2995,7 +2994,7 @@ static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) static void dev_seq_stop(struct seq_file *s, void *v) { - kfree (v); + kfree(s->private); } static int sg_proc_open_dev(struct inode *inode, struct file *file) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 0291a8fb654d..0a7839db5752 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4149,12 +4149,10 @@ static int __init init_st(void) do_create_driverfs_files(); return 0; } - if (st_sysfs_class) - class_destroy(st_sysfs_class); unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), - ST_MAX_TAPE_ENTRIES); } + class_destroy(st_sysfs_class); printk(KERN_ERR "Unable to get major %d for SCSI tapes\n", SCSI_TAPE_MAJOR); return 1; @@ -4162,13 +4160,11 @@ static int __init init_st(void) static void __exit exit_st(void) { - if (st_sysfs_class) - class_destroy(st_sysfs_class); - st_sysfs_class = NULL; do_remove_driverfs_files(); scsi_unregister_driver(&st_template.gendrv); unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), ST_MAX_TAPE_ENTRIES); + class_destroy(st_sysfs_class); kfree(scsi_tapes); printk(KERN_INFO "st: Unloaded.\n"); } |
