diff options
Diffstat (limited to 'drivers/scsi/qlogicfas408.c')
| -rw-r--r-- | drivers/scsi/qlogicfas408.c | 637 |
1 files changed, 637 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c new file mode 100644 index 000000000000..5b6ce0a88f08 --- /dev/null +++ b/drivers/scsi/qlogicfas408.c @@ -0,0 +1,637 @@ +/*----------------------------------------------------------------*/ +/* + Qlogic linux driver - work in progress. No Warranty express or implied. + Use at your own risk. Support Tort Reform so you won't have to read all + these silly disclaimers. + + Copyright 1994, Tom Zerucha. + tz@execpc.com + + Additional Code, and much appreciated help by + Michael A. Griffith + grif@cs.ucr.edu + + Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA + help respectively, and for suffering through my foolishness during the + debugging process. + + Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 1994 + (you can reference it, but it is incomplete and inaccurate in places) + + Version 0.46 1/30/97 - kernel 1.2.0+ + + Functions as standalone, loadable, and PCMCIA driver, the latter from + Dave Hinds' PCMCIA package. + + Cleaned up 26/10/2002 by Alan Cox <alan@redhat.com> as part of the 2.5 + SCSI driver cleanup and audit. This driver still needs work on the + following + - Non terminating hardware waits + - Some layering violations with its pcmcia stub + + Redistributable under terms of the GNU General Public License + + For the avoidance of doubt the "preferred form" of this code is one which + is in an open non patent encumbered format. Where cryptographic key signing + forms part of the process of creating an executable the information + including keys needed to generate an equivalently functional executable + are deemed to be part of the source code. + +*/ + +#include <linux/module.h> +#include <linux/blkdev.h> /* to get disk capacity */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/proc_fs.h> +#include <linux/unistd.h> +#include <linux/spinlock.h> +#include <linux/stat.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/dma.h> + +#include "scsi.h" +#include <scsi/scsi_host.h> +#include "qlogicfas408.h" + +/*----------------------------------------------------------------*/ +static int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */ +static int qlcfg6 = SYNCXFRPD; +static int qlcfg7 = SYNCOFFST; +static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4); +static int qlcfg9 = ((XTALFREQ + 4) / 5); +static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4); + +/*----------------------------------------------------------------*/ + +/*----------------------------------------------------------------*/ +/* local functions */ +/*----------------------------------------------------------------*/ + +/* error recovery - reset everything */ + +static void ql_zap(struct qlogicfas408_priv *priv) +{ + int x; + int qbase = priv->qbase; + int int_type = priv->int_type; + + x = inb(qbase + 0xd); + REG0; + outb(3, qbase + 3); /* reset SCSI */ + outb(2, qbase + 3); /* reset chip */ + if (x & 0x80) + REG1; +} + +/* + * Do a pseudo-dma tranfer + */ + +static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int reqlen) +{ + int j; + int qbase = priv->qbase; + j = 0; + if (phase & 1) { /* in */ +#if QL_TURBO_PDMA + rtrc(4) + /* empty fifo in large chunks */ + if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */ + insl(qbase + 4, request, 32); + reqlen -= 128; + request += 128; + } + while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */ + if ((j = inb(qbase + 8)) & 4) + { + insl(qbase + 4, request, 21); + reqlen -= 84; + request += 84; + } + if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */ + insl(qbase + 4, request, 11); + reqlen -= 44; + request += 44; + } +#endif + /* until both empty and int (or until reclen is 0) */ + rtrc(7) + j = 0; + while (reqlen && !((j & 0x10) && (j & 0xc0))) + { + /* while bytes to receive and not empty */ + j &= 0xc0; + while (reqlen && !((j = inb(qbase + 8)) & 0x10)) + { + *request++ = inb(qbase + 4); + reqlen--; + } + if (j & 0x10) + j = inb(qbase + 8); + + } + } else { /* out */ +#if QL_TURBO_PDMA + rtrc(4) + if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */ + outsl(qbase + 4, request, 32); + reqlen -= 128; + request += 128; + } + while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */ + if (!((j = inb(qbase + 8)) & 8)) { + outsl(qbase + 4, request, 21); + reqlen -= 84; + request += 84; + } + if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */ + outsl(qbase + 4, request, 10); + reqlen -= 40; + request += 40; + } +#endif + /* until full and int (or until reclen is 0) */ + rtrc(7) + j = 0; + while (reqlen && !((j & 2) && (j & 0xc0))) { + /* while bytes to send and not full */ + while (reqlen && !((j = inb(qbase + 8)) & 2)) + { + outb(*request++, qbase + 4); + reqlen--; + } + if (j & 2) + j = inb(qbase + 8); + } + } + /* maybe return reqlen */ + return inb(qbase + 8) & 0xc0; +} + +/* + * Wait for interrupt flag (polled - not real hardware interrupt) + */ + +static int ql_wai(struct qlogicfas408_priv *priv) +{ + int k; + int qbase = priv->qbase; + unsigned long i; + + k = 0; + i = jiffies + WATCHDOG; + while (time_before(jiffies, i) && !priv->qabort && + !((k = inb(qbase + 4)) & 0xe0)) { + barrier(); + cpu_relax(); + } + if (time_after_eq(jiffies, i)) + return (DID_TIME_OUT); + if (priv->qabort) + return (priv->qabort == 1 ? DID_ABORT : DID_RESET); + if (k & 0x60) + ql_zap(priv); + if (k & 0x20) + return (DID_PARITY); + if (k & 0x40) + return (DID_ERROR); + return 0; +} + +/* + * Initiate scsi command - queueing handler + * caller must hold host lock + */ + +static void ql_icmd(Scsi_Cmnd * cmd) +{ + struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd); + int qbase = priv->qbase; + int int_type = priv->int_type; + unsigned int i; + + priv->qabort = 0; + + REG0; + /* clearing of interrupts and the fifo is needed */ + + inb(qbase + 5); /* clear interrupts */ + if (inb(qbase + 5)) /* if still interrupting */ + outb(2, qbase + 3); /* reset chip */ + else if (inb(qbase + 7) & 0x1f) + outb(1, qbase + 3); /* clear fifo */ + while (inb(qbase + 5)); /* clear ints */ + REG1; + outb(1, qbase + 8); /* set for PIO pseudo DMA */ + outb(0, qbase + 0xb); /* disable ints */ + inb(qbase + 8); /* clear int bits */ + REG0; + outb(0x40, qbase + 0xb); /* enable features */ + + /* configurables */ + outb(qlcfgc, qbase + 0xc); + /* config: no reset interrupt, (initiator) bus id */ + outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8); + outb(qlcfg7, qbase + 7); + outb(qlcfg6, qbase + 6); + /**/ outb(qlcfg5, qbase + 5); /* select timer */ + outb(qlcfg9 & 7, qbase + 9); /* prescaler */ +/* outb(0x99, qbase + 5); */ + outb(cmd->device->id, qbase + 4); + + for (i = 0; i < cmd->cmd_len; i++) + outb(cmd->cmnd[i], qbase + 2); + + priv->qlcmd = cmd; + outb(0x41, qbase + 3); /* select and send command */ +} + +/* + * Process scsi command - usually after interrupt + */ + +static unsigned int ql_pcmd(Scsi_Cmnd * cmd) +{ + unsigned int i, j; + unsigned long k; + unsigned int result; /* ultimate return result */ + unsigned int status; /* scsi returned status */ + unsigned int message; /* scsi returned message */ + unsigned int phase; /* recorded scsi phase */ + unsigned int reqlen; /* total length of transfer */ + struct scatterlist *sglist; /* scatter-gather list pointer */ + unsigned int sgcount; /* sg counter */ + char *buf; + struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd); + int qbase = priv->qbase; + int int_type = priv->int_type; + + rtrc(1) + j = inb(qbase + 6); + i = inb(qbase + 5); + if (i == 0x20) { + return (DID_NO_CONNECT << 16); + } + i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */ + if (i != 0x18) { + printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i); + ql_zap(priv); + return (DID_BAD_INTR << 16); + } + j &= 7; /* j = inb( qbase + 7 ) >> 5; */ + + /* correct status is supposed to be step 4 */ + /* it sometimes returns step 3 but with 0 bytes left to send */ + /* We can try stuffing the FIFO with the max each time, but we will get a + sequence of 3 if any bytes are left (but we do flush the FIFO anyway */ + + if (j != 3 && j != 4) { + printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n", + j, i, inb(qbase + 7) & 0x1f); + ql_zap(priv); + return (DID_ERROR << 16); + } + result = DID_OK; + if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */ + outb(1, qbase + 3); /* clear fifo */ + /* note that request_bufflen is the total xfer size when sg is used */ + reqlen = cmd->request_bufflen; + /* note that it won't work if transfers > 16M are requested */ + if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */ + rtrc(2) + outb(reqlen, qbase); /* low-mid xfer cnt */ + outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */ + outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */ + outb(0x90, qbase + 3); /* command do xfer */ + /* PIO pseudo DMA to buffer or sglist */ + REG1; + if (!cmd->use_sg) + ql_pdma(priv, phase, cmd->request_buffer, + cmd->request_bufflen); + else { + sgcount = cmd->use_sg; + sglist = cmd->request_buffer; + while (sgcount--) { + if (priv->qabort) { + REG0; + return ((priv->qabort == 1 ? + DID_ABORT : DID_RESET) << 16); + } + buf = page_address(sglist->page) + sglist->offset; + if (ql_pdma(priv, phase, buf, sglist->length)) + break; + sglist++; + } + } + REG0; + rtrc(2) + /* + * Wait for irq (split into second state of irq handler + * if this can take time) + */ + if ((k = ql_wai(priv))) + return (k << 16); + k = inb(qbase + 5); /* should be 0x10, bus service */ + } + + /* + * Enter Status (and Message In) Phase + */ + + k = jiffies + WATCHDOG; + + while (time_before(jiffies, k) && !priv->qabort && + !(inb(qbase + 4) & 6)) + cpu_relax(); /* wait for status phase */ + + if (time_after_eq(jiffies, k)) { + ql_zap(priv); + return (DID_TIME_OUT << 16); + } + + /* FIXME: timeout ?? */ + while (inb(qbase + 5)) + cpu_relax(); /* clear pending ints */ + + if (priv->qabort) + return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16); + + outb(0x11, qbase + 3); /* get status and message */ + if ((k = ql_wai(priv))) + return (k << 16); + i = inb(qbase + 5); /* get chip irq stat */ + j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */ + status = inb(qbase + 2); + message = inb(qbase + 2); + + /* + * Should get function complete int if Status and message, else + * bus serv if only status + */ + if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) { + printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j); + result = DID_ERROR; + } + outb(0x12, qbase + 3); /* done, disconnect */ + rtrc(1) + if ((k = ql_wai(priv))) + return (k << 16); + + /* + * Should get bus service interrupt and disconnect interrupt + */ + + i = inb(qbase + 5); /* should be bus service */ + while (!priv->qabort && ((i & 0x20) != 0x20)) { + barrier(); + cpu_relax(); + i |= inb(qbase + 5); + } + rtrc(0) + + if (priv->qabort) + return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16); + + return (result << 16) | (message << 8) | (status & STATUS_MASK); +} + +/* + * Interrupt handler + */ + +static void ql_ihandl(int irq, void *dev_id, struct pt_regs *regs) +{ + Scsi_Cmnd *icmd; + struct Scsi_Host *host = (struct Scsi_Host *)dev_id; + struct qlogicfas408_priv *priv = get_priv_by_host(host); + int qbase = priv->qbase; + REG0; + + if (!(inb(qbase + 4) & 0x80)) /* false alarm? */ + return; + + if (priv->qlcmd == NULL) { /* no command to process? */ + int i; + i = 16; + while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */ + return; + } + icmd = priv->qlcmd; + icmd->result = ql_pcmd(icmd); + priv->qlcmd = NULL; + /* + * If result is CHECK CONDITION done calls qcommand to request + * sense + */ + (icmd->scsi_done) (icmd); +} + +irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long flags; + struct Scsi_Host *host = dev_id; + + spin_lock_irqsave(host->host_lock, flags); + ql_ihandl(irq, dev_id, regs); + spin_unlock_irqrestore(host->host_lock, flags); + return IRQ_HANDLED; +} + +/* + * Queued command + */ + +int qlogicfas408_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) +{ + struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd); + if (cmd->device->id == priv->qinitid) { + cmd->result = DID_BAD_TARGET << 16; + done(cmd); + return 0; + } + + cmd->scsi_done = done; + /* wait for the last command's interrupt to finish */ + while (priv->qlcmd != NULL) { + barrier(); + cpu_relax(); + } + ql_icmd(cmd); + return 0; +} + +/* + * Return bios parameters + */ + +int qlogicfas408_biosparam(struct scsi_device * disk, + struct block_device *dev, + sector_t capacity, int ip[]) +{ +/* This should mimic the DOS Qlogic driver's behavior exactly */ + ip[0] = 0x40; + ip[1] = 0x20; + ip[2] = (unsigned long) capacity / (ip[0] * ip[1]); + if (ip[2] > 1024) { + ip[0] = 0xff; + ip[1] = 0x3f; + ip[2] = (unsigned long) capacity / (ip[0] * ip[1]); +#if 0 + if (ip[2] > 1023) + ip[2] = 1023; +#endif + } + return 0; +} + +/* + * Abort a command in progress + */ + +int qlogicfas408_abort(Scsi_Cmnd * cmd) +{ + struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd); + priv->qabort = 1; + ql_zap(priv); + return SUCCESS; +} + +/* + * Reset SCSI bus + * FIXME: This function is invoked with cmd = NULL directly by + * the PCMCIA qlogic_stub code. This wants fixing + */ + +int qlogicfas408_bus_reset(Scsi_Cmnd * cmd) +{ + struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd); + priv->qabort = 2; + ql_zap(priv); + return SUCCESS; +} + +/* + * Reset SCSI host controller + */ + +int qlogicfas408_host_reset(Scsi_Cmnd * cmd) +{ + return FAILED; +} + +/* + * Reset SCSI device + */ + +int qlogicfas408_device_reset(Scsi_Cmnd * cmd) +{ + return FAILED; +} + +/* + * Return info string + */ + +const char *qlogicfas408_info(struct Scsi_Host *host) +{ + struct qlogicfas408_priv *priv = get_priv_by_host(host); + return priv->qinfo; +} + +/* + * Get type of chip + */ + +int qlogicfas408_get_chip_type(int qbase, int int_type) +{ + REG1; + return inb(qbase + 0xe) & 0xf8; +} + +/* + * Perform initialization tasks + */ + +void qlogicfas408_setup(int qbase, int id, int int_type) +{ + outb(1, qbase + 8); /* set for PIO pseudo DMA */ + REG0; + outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */ + outb(qlcfg5, qbase + 5); /* select timer */ + outb(qlcfg9, qbase + 9); /* prescaler */ + +#if QL_RESET_AT_START + outb(3, qbase + 3); + + REG1; + /* FIXME: timeout */ + while (inb(qbase + 0xf) & 4) + cpu_relax(); + + REG0; +#endif +} + +/* + * Checks if this is a QLogic FAS 408 + */ + +int qlogicfas408_detect(int qbase, int int_type) +{ + REG1; + return (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7) && + ((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7)); +} + +/* + * Disable interrupts + */ + +void qlogicfas408_disable_ints(struct qlogicfas408_priv *priv) +{ + int qbase = priv->qbase; + int int_type = priv->int_type; + + REG1; + outb(0, qbase + 0xb); /* disable ints */ +} + +/* + * Init and exit functions + */ + +static int __init qlogicfas408_init(void) +{ + return 0; +} + +static void __exit qlogicfas408_exit(void) +{ + +} + +MODULE_AUTHOR("Tom Zerucha, Michael Griffith"); +MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers"); +MODULE_LICENSE("GPL"); +module_init(qlogicfas408_init); +module_exit(qlogicfas408_exit); + +EXPORT_SYMBOL(qlogicfas408_info); +EXPORT_SYMBOL(qlogicfas408_queuecommand); +EXPORT_SYMBOL(qlogicfas408_abort); +EXPORT_SYMBOL(qlogicfas408_bus_reset); +EXPORT_SYMBOL(qlogicfas408_device_reset); +EXPORT_SYMBOL(qlogicfas408_host_reset); +EXPORT_SYMBOL(qlogicfas408_biosparam); +EXPORT_SYMBOL(qlogicfas408_ihandl); +EXPORT_SYMBOL(qlogicfas408_get_chip_type); +EXPORT_SYMBOL(qlogicfas408_setup); +EXPORT_SYMBOL(qlogicfas408_detect); +EXPORT_SYMBOL(qlogicfas408_disable_ints); + |
