1 files changed, 425 insertions, 0 deletions
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
new file mode 100644
index 000000000000..4766bcd63692
--- /dev/null
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -0,0 +1,425 @@
+/*======================================================================
+
+    A driver for the Qlogic SCSI card
+
+    qlogic_cs.c 1.79 2000/06/12 21:27:26
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in which
+    case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+    
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <scsi/scsi.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_ioctl.h>
+#include <linux/interrupt.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "../qlogicfas408.h"
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/ciscode.h>
+
+/* Set the following to 2 to use normal interrupt (active high/totempole-
+ * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
+ * drain
+ */
+#define INT_TYPE	0
+
+static char qlogic_name[] = "qlogic_cs";
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0644);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+static Scsi_Host_Template qlogicfas_driver_template = {
+	.module			= THIS_MODULE,
+	.name			= qlogic_name,
+	.proc_name		= qlogic_name,
+	.info			= qlogicfas408_info,
+	.queuecommand		= qlogicfas408_queuecommand,
+	.eh_abort_handler	= qlogicfas408_abort,
+	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
+	.eh_device_reset_handler= qlogicfas408_device_reset,
+	.eh_host_reset_handler	= qlogicfas408_host_reset,
+	.bios_param		= qlogicfas408_biosparam,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= 1,
+	.use_clustering		= DISABLE_CLUSTERING,
+};
+
+/*====================================================================*/
+
+typedef struct scsi_info_t {
+	dev_link_t link;
+	dev_node_t node;
+	struct Scsi_Host *host;
+	unsigned short manf_id;
+} scsi_info_t;
+
+static void qlogic_release(dev_link_t *link);
+static int qlogic_event(event_t event, int priority, event_callback_args_t * args);
+
+static dev_link_t *qlogic_attach(void);
+static void qlogic_detach(dev_link_t *);
+
+
+static dev_link_t *dev_list = NULL;
+
+static dev_info_t dev_info = "qlogic_cs";
+
+static struct Scsi_Host *qlogic_detect(Scsi_Host_Template *host,
+				dev_link_t *link, int qbase, int qlirq)
+{
+	int qltyp;		/* type of chip */
+	int qinitid;
+	struct Scsi_Host *shost;	/* registered host structure */
+	struct qlogicfas408_priv *priv;
+
+	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
+	qinitid = host->this_id;
+	if (qinitid < 0)
+		qinitid = 7;	/* if no ID, use 7 */
+
+	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
+
+	host->name = qlogic_name;
+	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
+	if (!shost)
+		goto err;
+	shost->io_port = qbase;
+	shost->n_io_port = 16;
+	shost->dma_channel = -1;
+	if (qlirq != -1)
+		shost->irq = qlirq;
+
+	priv = get_priv_by_host(shost);
+	priv->qlirq = qlirq;
+	priv->qbase = qbase;
+	priv->qinitid = qinitid;
+	priv->shost = shost;
+	priv->int_type = INT_TYPE;					
+
+	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
+		goto free_scsi_host;
+
+	sprintf(priv->qinfo,
+		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
+		qltyp, qbase, qlirq, QL_TURBO_PDMA);
+
+	if (scsi_add_host(shost, NULL))
+		goto free_interrupt;
+
+	scsi_scan_host(shost);
+
+	return shost;
+
+free_interrupt:
+	free_irq(qlirq, shost);
+
+free_scsi_host:
+	scsi_host_put(shost);
+	
+err:
+	return NULL;
+}
+static dev_link_t *qlogic_attach(void)
+{
+	scsi_info_t *info;
+	client_reg_t client_reg;
+	dev_link_t *link;
+	int ret;
+
+	DEBUG(0, "qlogic_attach()\n");
+
+	/* Create new SCSI device */
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return NULL;
+	memset(info, 0, sizeof(*info));
+	link = &info->link;
+	link->priv = info;
+	link->io.NumPorts1 = 16;
+	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+	link->io.IOAddrLines = 10;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->conf.Attributes = CONF_ENABLE_IRQ;
+	link->conf.Vcc = 50;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->conf.Present = PRESENT_OPTION;
+
+	/* Register with Card Services */
+	link->next = dev_list;
+	dev_list = link;
+	client_reg.dev_info = &dev_info;
+	client_reg.event_handler = &qlogic_event;
+	client_reg.EventMask = CS_EVENT_RESET_REQUEST | CS_EVENT_CARD_RESET | CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != 0) {
+		cs_error(link->handle, RegisterClient, ret);
+		qlogic_detach(link);
+		return NULL;
+	}
+
+	return link;
+}				/* qlogic_attach */
+
+/*====================================================================*/
+
+static void qlogic_detach(dev_link_t * link)
+{
+	dev_link_t **linkp;
+
+	DEBUG(0, "qlogic_detach(0x%p)\n", link);
+
+	/* Locate device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+		if (*linkp == link)
+			break;
+	if (*linkp == NULL)
+		return;
+
+	if (link->state & DEV_CONFIG)
+		qlogic_release(link);
+
+	if (link->handle)
+		pcmcia_deregister_client(link->handle);
+
+	/* Unlink device structure, free bits */
+	*linkp = link->next;
+	kfree(link->priv);
+
+}				/* qlogic_detach */
+
+/*====================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void qlogic_config(dev_link_t * link)
+{
+	client_handle_t handle = link->handle;
+	scsi_info_t *info = link->priv;
+	tuple_t tuple;
+	cisparse_t parse;
+	int i, last_ret, last_fn;
+	unsigned short tuple_data[32];
+	struct Scsi_Host *host;
+
+	DEBUG(0, "qlogic_config(0x%p)\n", link);
+
+	tuple.TupleData = (cisdata_t *) tuple_data;
+	tuple.TupleDataMax = 64;
+	tuple.TupleOffset = 0;
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+	link->conf.ConfigBase = parse.config.base;
+
+	tuple.DesiredTuple = CISTPL_MANFID;
+	if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) && (pcmcia_get_tuple_data(handle, &tuple) == CS_SUCCESS))
+		info->manf_id = le16_to_cpu(tuple.TupleData[0]);
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	while (1) {
+		if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+				pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+			goto next_entry;
+		link->conf.ConfigIndex = parse.cftable_entry.index;
+		link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
+		link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
+		if (link->io.BasePort1 != 0) {
+			i = pcmcia_request_io(handle, &link->io);
+			if (i == CS_SUCCESS)
+				break;
+		}
+	      next_entry:
+		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+	}
+
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+
+	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
+		/* set ATAcmd */
+		outb(0xb4, link->io.BasePort1 + 0xd);
+		outb(0x24, link->io.BasePort1 + 0x9);
+		outb(0x04, link->io.BasePort1 + 0xd);
+	}
+
+	/* The KXL-810AN has a bigger IO port window */
+	if (link->io.NumPorts1 == 32)
+		host = qlogic_detect(&qlogicfas_driver_template, link,
+			link->io.BasePort1 + 16, link->irq.AssignedIRQ);
+	else
+		host = qlogic_detect(&qlogicfas_driver_template, link,
+			link->io.BasePort1, link->irq.AssignedIRQ);
+	
+	if (!host) {
+		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
+		goto out;
+	}
+
+	sprintf(info->node.dev_name, "scsi%d", host->host_no);
+	link->dev = &info->node;
+	info->host = host;
+
+out:
+	link->state &= ~DEV_CONFIG_PENDING;
+	return;
+
+cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+	link->dev = NULL;
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+	pcmcia_release_irq(link->handle, &link->irq);
+	link->state &= ~DEV_CONFIG;
+	return;
+
+}				/* qlogic_config */
+
+/*====================================================================*/
+
+static void qlogic_release(dev_link_t *link)
+{
+	scsi_info_t *info = link->priv;
+
+	DEBUG(0, "qlogic_release(0x%p)\n", link);
+
+	scsi_remove_host(info->host);
+	link->dev = NULL;
+
+	free_irq(link->irq.AssignedIRQ, info->host);
+
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+	pcmcia_release_irq(link->handle, &link->irq);
+
+	scsi_host_put(info->host);
+
+	link->state &= ~DEV_CONFIG;
+}
+
+/*====================================================================*/
+
+static int qlogic_event(event_t event, int priority, event_callback_args_t * args)
+{
+	dev_link_t *link = args->client_data;
+
+	DEBUG(1, "qlogic_event(0x%06x)\n", event);
+
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG)
+			qlogic_release(link);
+		break;
+	case CS_EVENT_CARD_INSERTION:
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		qlogic_config(link);
+		break;
+	case CS_EVENT_PM_SUSPEND:
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		if (link->state & DEV_CONFIG)
+			pcmcia_release_configuration(link->handle);
+		break;
+	case CS_EVENT_PM_RESUME:
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		if (link->state & DEV_CONFIG) {
+			scsi_info_t *info = link->priv;
+			pcmcia_request_configuration(link->handle, &link->conf);
+			if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
+				outb(0x80, link->io.BasePort1 + 0xd);
+				outb(0x24, link->io.BasePort1 + 0x9);
+				outb(0x04, link->io.BasePort1 + 0xd);
+			}
+			/* Ugggglllyyyy!!! */
+			qlogicfas408_bus_reset(NULL);
+		}
+		break;
+	}
+	return 0;
+}				/* qlogic_event */
+
+
+static struct pcmcia_driver qlogic_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+	.name		= "qlogic_cs",
+	},
+	.attach		= qlogic_attach,
+	.detach		= qlogic_detach,
+};
+
+static int __init init_qlogic_cs(void)
+{
+	return pcmcia_register_driver(&qlogic_cs_driver);
+}
+
+static void __exit exit_qlogic_cs(void)
+{
+	pcmcia_unregister_driver(&qlogic_cs_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
+MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
+MODULE_LICENSE("GPL");
+module_init(init_qlogic_cs);
+module_exit(exit_qlogic_cs);