1 files changed, 172 insertions, 115 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a3c820083c36..907c94b9245d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -58,8 +58,7 @@ spinlock_t _dump_buf_lock;
 
 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
 static int lpfc_post_rcv_buf(struct lpfc_hba *);
-static int lpfc_sli4_queue_create(struct lpfc_hba *);
-static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_sli4_queue_verify(struct lpfc_hba *);
 static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
 static int lpfc_setup_endian_order(struct lpfc_hba *);
 static int lpfc_sli4_read_config(struct lpfc_hba *);
@@ -1438,6 +1437,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	struct Scsi_Host *shost;
 	uint32_t if_type;
 	struct lpfc_register portstat_reg;
+	int rc;
 
 	/* If the pci channel is offline, ignore possible errors, since
 	 * we cannot communicate with the pci card anyway.
@@ -1480,16 +1480,24 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			lpfc_sli4_offline_eratt(phba);
 			return;
 		}
-		if (bf_get(lpfc_sliport_status_rn, &portstat_reg)) {
-			/*
-			 * TODO: Attempt port recovery via a port reset.
-			 * When fully implemented, the driver should
-			 * attempt to recover the port here and return.
-			 * For now, log an error and take the port offline.
-			 */
+		/*
+		 * On error status condition, driver need to wait for port
+		 * ready before performing reset.
+		 */
+		rc = lpfc_sli4_pdev_status_reg_wait(phba);
+		if (!rc) {
+			/* need reset: attempt for port recovery */
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"2887 Port Error: Attempting "
 					"Port Recovery\n");
+			lpfc_offline_prep(phba);
+			lpfc_offline(phba);
+			lpfc_sli_brdrestart(phba);
+			if (lpfc_online(phba) == 0) {
+				lpfc_unblock_mgmt_io(phba);
+				return;
+			}
+			/* fall through for not able to recover */
 		}
 		lpfc_sli4_offline_eratt(phba);
 		break;
@@ -1724,11 +1732,20 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
 				j = 0;
 				Length -= (3+i);
 				while(i--) {
-				phba->Port[j++] = vpd[index++];
-				if (j == 19)
-					break;
+					if ((phba->sli_rev == LPFC_SLI_REV4) &&
+					    (phba->sli4_hba.pport_name_sta ==
+					     LPFC_SLI4_PPNAME_GET)) {
+						j++;
+						index++;
+					} else
+						phba->Port[j++] = vpd[index++];
+					if (j == 19)
+						break;
 				}
-				phba->Port[j] = 0;
+				if ((phba->sli_rev != LPFC_SLI_REV4) ||
+				    (phba->sli4_hba.pport_name_sta ==
+				     LPFC_SLI4_PPNAME_NON))
+					phba->Port[j] = 0;
 				continue;
 			}
 			else {
@@ -1958,7 +1975,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 	case PCI_DEVICE_ID_LANCER_FCOE:
 	case PCI_DEVICE_ID_LANCER_FCOE_VF:
 		oneConnect = 1;
-		m = (typeof(m)){"OCe50100", "PCIe", "FCoE"};
+		m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
 		break;
 	default:
 		m = (typeof(m)){"Unknown", "", ""};
@@ -2432,17 +2449,19 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
 	uint8_t actcmd = MBX_HEARTBEAT;
 	unsigned long timeout;
 
-
+	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
 	spin_lock_irqsave(&phba->hbalock, iflag);
 	phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
-	if (phba->sli.mbox_active)
+	if (phba->sli.mbox_active) {
 		actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+		/* Determine how long we might wait for the active mailbox
+		 * command to be gracefully completed by firmware.
+		 */
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+				phba->sli.mbox_active) * 1000) + jiffies;
+	}
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
-	/* Determine how long we might wait for the active mailbox
-	 * command to be gracefully completed by firmware.
-	 */
-	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
-			jiffies;
+
 	/* Wait for the outstnading mailbox command to complete */
 	while (phba->sli.mbox_active) {
 		/* Check active mailbox complete status every 2ms */
@@ -3949,7 +3968,7 @@ static int
 lpfc_enable_pci_dev(struct lpfc_hba *phba)
 {
 	struct pci_dev *pdev;
-	int bars;
+	int bars = 0;
 
 	/* Obtain PCI device reference */
 	if (!phba->pcidev)
@@ -3978,6 +3997,8 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba)
 out_disable_device:
 	pci_disable_device(pdev);
 out_error:
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"1401 Failed to enable pci device, bars:x%x\n", bars);
 	return -ENODEV;
 }
 
@@ -4051,9 +4072,6 @@ lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *phba)
 	uint16_t nr_virtfn;
 	int pos;
 
-	if (!pdev->is_physfn)
-		return 0;
-
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
 	if (pos == 0)
 		return 0;
@@ -4474,15 +4492,15 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		}
 	}
 	mempool_free(mboxq, phba->mbox_mem_pool);
-	/* Create all the SLI4 queues */
-	rc = lpfc_sli4_queue_create(phba);
+	/* Verify all the SLI4 queues */
+	rc = lpfc_sli4_queue_verify(phba);
 	if (rc)
 		goto out_free_bsmbx;
 
 	/* Create driver internal CQE event pool */
 	rc = lpfc_sli4_cq_event_pool_create(phba);
 	if (rc)
-		goto out_destroy_queue;
+		goto out_free_bsmbx;
 
 	/* Initialize and populate the iocb list per host */
 	rc = lpfc_init_sgl_list(phba);
@@ -4516,14 +4534,21 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		goto out_remove_rpi_hdrs;
 	}
 
-	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+	/*
+	 * The cfg_fcp_eq_count can be zero whenever there is exactly one
+	 * interrupt vector.  This is not an error
+	 */
+	if (phba->cfg_fcp_eq_count) {
+		phba->sli4_hba.fcp_eq_hdl =
+				kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
 				    phba->cfg_fcp_eq_count), GFP_KERNEL);
-	if (!phba->sli4_hba.fcp_eq_hdl) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"2572 Failed allocate memory for fast-path "
-				"per-EQ handle array\n");
-		rc = -ENOMEM;
-		goto out_free_fcf_rr_bmask;
+		if (!phba->sli4_hba.fcp_eq_hdl) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2572 Failed allocate memory for "
+					"fast-path per-EQ handle array\n");
+			rc = -ENOMEM;
+			goto out_free_fcf_rr_bmask;
+		}
 	}
 
 	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
@@ -4567,8 +4592,6 @@ out_free_sgl_list:
 	lpfc_free_sgl_list(phba);
 out_destroy_cq_event_pool:
 	lpfc_sli4_cq_event_pool_destroy(phba);
-out_destroy_queue:
-	lpfc_sli4_queue_destroy(phba);
 out_free_bsmbx:
 	lpfc_destroy_bootstrap_mbox(phba);
 out_free_mem:
@@ -4608,9 +4631,6 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 	/* Free the SCSI sgl management array */
 	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
 
-	/* Free the SLI4 queues */
-	lpfc_sli4_queue_destroy(phba);
-
 	/* Free the completion queue EQ event pool */
 	lpfc_sli4_cq_event_release_all(phba);
 	lpfc_sli4_cq_event_pool_destroy(phba);
@@ -6139,24 +6159,21 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * lpfc_sli4_queue_verify - Verify and update EQ and CQ counts
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
- * operation. For each SLI4 queue type, the parameters such as queue entry
- * count (queue depth) shall be taken from the module parameter. For now,
- * we just use some constant number as place holder.
+ * This routine is invoked to check the user settable queue counts for EQs and
+ * CQs. after this routine is called the counts will be set to valid values that
+ * adhere to the constraints of the system's interrupt vectors and the port's
+ * queue resources.
  *
  * Return codes
  *      0 - successful
  *      -ENOMEM - No available memory
- *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
-lpfc_sli4_queue_create(struct lpfc_hba *phba)
+lpfc_sli4_queue_verify(struct lpfc_hba *phba)
 {
-	struct lpfc_queue *qdesc;
-	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
 	int cfg_fcp_wq_count;
 	int cfg_fcp_eq_count;
 
@@ -6229,14 +6246,43 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 	/* The overall number of event queues used */
 	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
 
-	/*
-	 * Create Event Queues (EQs)
-	 */
-
 	/* Get EQ depth from module parameter, fake the default for now */
 	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
 	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
 
+	/* Get CQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+	return 0;
+out_error:
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      -ENOMEM - No availble memory
+ *      -EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *qdesc;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+
+	/*
+	 * Create Event Queues (EQs)
+	 */
+
 	/* Create slow path event queue */
 	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
 				      phba->sli4_hba.eq_ecount);
@@ -6247,14 +6293,20 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 	}
 	phba->sli4_hba.sp_eq = qdesc;
 
-	/* Create fast-path FCP Event Queue(s) */
-	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
-			       phba->cfg_fcp_eq_count), GFP_KERNEL);
-	if (!phba->sli4_hba.fp_eq) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"2576 Failed allocate memory for fast-path "
-				"EQ record array\n");
-		goto out_free_sp_eq;
+	/*
+	 * Create fast-path FCP Event Queue(s).  The cfg_fcp_eq_count can be
+	 * zero whenever there is exactly one interrupt vector.  This is not
+	 * an error.
+	 */
+	if (phba->cfg_fcp_eq_count) {
+		phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+				       phba->cfg_fcp_eq_count), GFP_KERNEL);
+		if (!phba->sli4_hba.fp_eq) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2576 Failed allocate memory for "
+					"fast-path EQ record array\n");
+			goto out_free_sp_eq;
+		}
 	}
 	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
 		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
@@ -6271,10 +6323,6 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 	 * Create Complete Queues (CQs)
 	 */
 
-	/* Get CQ depth from module parameter, fake the default for now */
-	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
-	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
-
 	/* Create slow-path Mailbox Command Complete Queue */
 	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
 				      phba->sli4_hba.cq_ecount);
@@ -6296,16 +6344,25 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 	phba->sli4_hba.els_cq = qdesc;
 
 
-	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
-	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
-				phba->cfg_fcp_eq_count), GFP_KERNEL);
+	/*
+	 * Create fast-path FCP Completion Queue(s), one-to-one with FCP EQs.
+	 * If there are no FCP EQs then create exactly one FCP CQ.
+	 */
+	if (phba->cfg_fcp_eq_count)
+		phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+						 phba->cfg_fcp_eq_count),
+						GFP_KERNEL);
+	else
+		phba->sli4_hba.fcp_cq = kzalloc(sizeof(struct lpfc_queue *),
+						GFP_KERNEL);
 	if (!phba->sli4_hba.fcp_cq) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2577 Failed allocate memory for fast-path "
 				"CQ record array\n");
 		goto out_free_els_cq;
 	}
-	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+	fcp_cqidx = 0;
+	do {
 		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
 					      phba->sli4_hba.cq_ecount);
 		if (!qdesc) {
@@ -6315,7 +6372,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 			goto out_free_fcp_cq;
 		}
 		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
-	}
+	} while (++fcp_cqidx < phba->cfg_fcp_eq_count);
 
 	/* Create Mailbox Command Queue */
 	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
@@ -6447,7 +6504,7 @@ out_error:
  *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
-static void
+void
 lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
 {
 	int fcp_qidx;
@@ -6723,6 +6780,10 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 				"0540 Receive Queue not allocated\n");
 		goto out_destroy_fcp_wq;
 	}
+
+	lpfc_rq_adjust_repost(phba, phba->sli4_hba.hdr_rq, LPFC_ELS_HBQ);
+	lpfc_rq_adjust_repost(phba, phba->sli4_hba.dat_rq, LPFC_ELS_HBQ);
+
 	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
 			    phba->sli4_hba.els_cq, LPFC_USOL);
 	if (rc) {
@@ -6731,6 +6792,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 				"rc = 0x%x\n", rc);
 		goto out_destroy_fcp_wq;
 	}
+
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
 			"parent cq-id=%d\n",
@@ -6790,8 +6852,10 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
 	/* Unset ELS complete queue */
 	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
 	/* Unset FCP response complete queue */
-	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+	fcp_qidx = 0;
+	do {
 		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+	} while (++fcp_qidx < phba->cfg_fcp_eq_count);
 	/* Unset fast-path event queue */
 	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
 		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
@@ -7040,10 +7104,11 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 			 * the loop again.
 			 */
 			for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
+				msleep(10);
 				if (lpfc_readl(phba->sli4_hba.u.if_type2.
 					      STATUSregaddr, &reg_data.word0)) {
 					rc = -ENODEV;
-					break;
+					goto out;
 				}
 				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
 					break;
@@ -7051,7 +7116,6 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 					reset_again++;
 					break;
 				}
-				msleep(10);
 			}
 
 			/*
@@ -7065,11 +7129,6 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 			}
 
 			/* Detect any port errors. */
-			if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
-				 &reg_data.word0)) {
-				rc = -ENODEV;
-				break;
-			}
 			if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
 			    (rdy_chk >= 1000)) {
 				phba->work_status[0] = readl(
@@ -7102,6 +7161,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 		break;
 	}
 
+out:
 	/* Catch the not-ready port failure after a port reset. */
 	if (num_resets >= MAX_IF_TYPE_2_RESETS)
 		rc = -ENODEV;
@@ -7149,12 +7209,13 @@ lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
 	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
 			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
 
-	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
 	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
 		if (!phba->sli4_hba.intr_enable)
 			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-		else
+		else {
+			mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
 			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+		}
 		if (rc == MBX_TIMEOUT)
 			break;
 		/* Check return status */
@@ -7974,6 +8035,7 @@ lpfc_sli4_unset_hba(struct lpfc_hba *phba)
 
 	/* Reset SLI4 HBA FCoE function */
 	lpfc_pci_function_reset(phba);
+	lpfc_sli4_queue_destroy(phba);
 
 	return;
 }
@@ -8087,6 +8149,7 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba)
 
 	/* Reset SLI4 HBA FCoE function */
 	lpfc_pci_function_reset(phba);
+	lpfc_sli4_queue_destroy(phba);
 
 	/* Stop the SLI4 device port */
 	phba->pport->work_port_events = 0;
@@ -8120,7 +8183,7 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	if (!phba->sli4_hba.intr_enable)
 		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
 	else {
-		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_PORT_CAPABILITIES);
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
 		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
 	}
 
@@ -8182,6 +8245,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	int rc;
 	struct lpfc_mqe *mqe = &mboxq->u.mqe;
 	struct lpfc_pc_sli4_params *sli4_params;
+	uint32_t mbox_tmo;
 	int length;
 	struct lpfc_sli4_parameters *mbx_sli4_parameters;
 
@@ -8200,9 +8264,10 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			 length, LPFC_SLI4_MBX_EMBED);
 	if (!phba->sli4_hba.intr_enable)
 		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	else
-		rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
-			lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	}
 	if (unlikely(rc))
 		return rc;
 	sli4_params = &phba->sli4_hba.pc_sli4_params;
@@ -8271,11 +8336,8 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	/* Perform generic PCI device enabling operation */
 	error = lpfc_enable_pci_dev(phba);
-	if (error) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1401 Failed to enable pci device.\n");
+	if (error)
 		goto out_free_phba;
-	}
 
 	/* Set up SLI API function jump table for PCI-device group-0 HBAs */
 	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
@@ -8322,6 +8384,9 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_free_iocb_list;
 	}
 
+	/* Get the default values for Model Name and Description */
+	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
 	/* Create SCSI host to the physical port */
 	error = lpfc_create_shost(phba);
 	if (error) {
@@ -8885,16 +8950,17 @@ lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
 	uint32_t offset = 0, temp_offset = 0;
 
 	INIT_LIST_HEAD(&dma_buffer_list);
-	if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) ||
-	    (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) ||
-	    (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
-	    (image->size != fw->size)) {
+	if ((be32_to_cpu(image->magic_number) != LPFC_GROUP_OJECT_MAGIC_NUM) ||
+	    (bf_get_be32(lpfc_grp_hdr_file_type, image) !=
+	     LPFC_FILE_TYPE_GROUP) ||
+	    (bf_get_be32(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
+	    (be32_to_cpu(image->size) != fw->size)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"3022 Invalid FW image found. "
-				"Magic:%d Type:%x ID:%x\n",
-				image->magic_number,
-				bf_get(lpfc_grp_hdr_file_type, image),
-				bf_get(lpfc_grp_hdr_id, image));
+				"Magic:%x Type:%x ID:%x\n",
+				be32_to_cpu(image->magic_number),
+				bf_get_be32(lpfc_grp_hdr_file_type, image),
+				bf_get_be32(lpfc_grp_hdr_id, image));
 		return -EINVAL;
 	}
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
@@ -8924,11 +8990,11 @@ lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
 		while (offset < fw->size) {
 			temp_offset = offset;
 			list_for_each_entry(dmabuf, &dma_buffer_list, list) {
-				if (offset + SLI4_PAGE_SIZE > fw->size) {
-					temp_offset += fw->size - offset;
+				if (temp_offset + SLI4_PAGE_SIZE > fw->size) {
 					memcpy(dmabuf->virt,
 					       fw->data + temp_offset,
-					       fw->size - offset);
+					       fw->size - temp_offset);
+					temp_offset = fw->size;
 					break;
 				}
 				memcpy(dmabuf->virt, fw->data + temp_offset,
@@ -8984,7 +9050,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	uint32_t cfg_mode, intr_mode;
 	int mcnt;
 	int adjusted_fcp_eq_count;
-	int fcp_qidx;
 	const struct firmware *fw;
 	uint8_t file_name[16];
 
@@ -8995,11 +9060,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	/* Perform generic PCI device enabling operation */
 	error = lpfc_enable_pci_dev(phba);
-	if (error) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1409 Failed to enable pci device.\n");
+	if (error)
 		goto out_free_phba;
-	}
 
 	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
 	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
@@ -9054,6 +9116,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_free_iocb_list;
 	}
 
+	/* Get the default values for Model Name and Description */
+	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
 	/* Create SCSI host to the physical port */
 	error = lpfc_create_shost(phba);
 	if (error) {
@@ -9093,16 +9158,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 			adjusted_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1;
 		else
 			adjusted_fcp_eq_count = phba->cfg_fcp_eq_count;
-		/* Free unused EQs */
-		for (fcp_qidx = adjusted_fcp_eq_count;
-		     fcp_qidx < phba->cfg_fcp_eq_count;
-		     fcp_qidx++) {
-			lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
-			/* do not delete the first fcp_cq */
-			if (fcp_qidx)
-				lpfc_sli4_queue_free(
-					phba->sli4_hba.fcp_cq[fcp_qidx]);
-		}
 		phba->cfg_fcp_eq_count = adjusted_fcp_eq_count;
 		/* Set up SLI-4 HBA */
 		if (lpfc_sli4_hba_setup(phba)) {
@@ -9285,6 +9340,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
 
 	/* Disable interrupt from device */
 	lpfc_sli4_disable_intr(phba);
+	lpfc_sli4_queue_destroy(phba);
 
 	/* Save device state to PCI config space */
 	pci_save_state(pdev);
@@ -9414,6 +9470,7 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
 
 	/* Disable interrupt and pci device */
 	lpfc_sli4_disable_intr(phba);
+	lpfc_sli4_queue_destroy(phba);
 	pci_disable_device(phba->pcidev);
 
 	/* Flush all driver's outstanding SCSI I/Os as we are to reset */