summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci')
-rw-r--r--drivers/scsi/isci/host.c69
-rw-r--r--drivers/scsi/isci/host.h15
-rw-r--r--drivers/scsi/isci/init.c3
-rw-r--r--drivers/scsi/isci/isci.h2
-rw-r--r--drivers/scsi/isci/phy.c11
-rw-r--r--drivers/scsi/isci/port.c2
-rw-r--r--drivers/scsi/isci/port_config.c2
-rw-r--r--drivers/scsi/isci/registers.h122
-rw-r--r--drivers/scsi/isci/remote_device.c24
-rw-r--r--drivers/scsi/isci/remote_device.h9
-rw-r--r--drivers/scsi/isci/request.c380
-rw-r--r--drivers/scsi/isci/request.h31
-rw-r--r--drivers/scsi/isci/sas.h2
-rw-r--r--drivers/scsi/isci/task.c29
-rw-r--r--drivers/scsi/isci/task.h19
15 files changed, 522 insertions, 198 deletions
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 6981b773a88d..f07f30fada1b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1263,6 +1263,10 @@ void isci_host_deinit(struct isci_host *ihost)
{
int i;
+ /* disable output data selects */
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+
isci_host_change_state(ihost, isci_stopping);
for (i = 0; i < SCI_MAX_PORTS; i++) {
struct isci_port *iport = &ihost->ports[i];
@@ -1281,6 +1285,12 @@ void isci_host_deinit(struct isci_host *ihost)
spin_unlock_irq(&ihost->scic_lock);
wait_for_stop(ihost);
+
+ /* disable sgpio: where the above wait should give time for the
+ * enclosure to sample the gpios going inactive
+ */
+ writel(0, &ihost->scu_registers->peg0.sgpio.interface_control);
+
sci_controller_reset(ihost);
/* Cancel any/all outstanding port timers */
@@ -2365,6 +2375,12 @@ int isci_host_init(struct isci_host *ihost)
for (i = 0; i < SCI_MAX_PHYS; i++)
isci_phy_init(&ihost->phys[i], ihost, i);
+ /* enable sgpio */
+ writel(1, &ihost->scu_registers->peg0.sgpio.interface_control);
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+ writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code);
+
for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
struct isci_remote_device *idev = &ihost->devices[i];
@@ -2760,3 +2776,56 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
return status;
}
+
+static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data)
+{
+ int d;
+
+ /* no support for TX_GP_CFG */
+ if (reg_index == 0)
+ return -EINVAL;
+
+ for (d = 0; d < isci_gpio_count(ihost); d++) {
+ u32 val = 0x444; /* all ODx.n clear */
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ int bit = (i << 2) + 2;
+
+ bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
+ write_data, reg_index,
+ reg_count);
+ if (bit < 0)
+ break;
+
+ /* if od is set, clear the 'invert' bit */
+ val &= ~(bit << ((i << 2) + 2));
+ }
+
+ if (i < 3)
+ break;
+ writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]);
+ }
+
+ /* unless reg_index is > 1, we should always be able to write at
+ * least one register
+ */
+ return d > 0;
+}
+
+int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ struct isci_host *ihost = sas_ha->lldd_ha;
+ int written;
+
+ switch (reg_type) {
+ case SAS_GPIO_REG_TX_GP:
+ written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data);
+ break;
+ default:
+ written = -EINVAL;
+ }
+
+ return written;
+}
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 9f33831a2f04..646051afd3cb 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -440,6 +440,18 @@ static inline bool is_c0(struct pci_dev *pdev)
return false;
}
+/* set hw control for 'activity', even though active enclosures seem to drive
+ * the activity led on their own. Skip setting FSENG control on 'status' due
+ * to unexpected operation and 'error' due to not being a supported automatic
+ * FSENG output
+ */
+#define SGPIO_HW_CONTROL 0x00000443
+
+static inline int isci_gpio_count(struct isci_host *ihost)
+{
+ return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select);
+}
+
void sci_controller_post_request(struct isci_host *ihost,
u32 request);
void sci_controller_release_frame(struct isci_host *ihost,
@@ -542,4 +554,7 @@ void sci_port_configuration_agent_construct(
enum sci_status sci_port_configuration_agent_initialize(
struct isci_host *ihost,
struct sci_port_configuration_agent *port_agent);
+
+int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data);
#endif
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 29aa34efb0f5..43fe840fbe9c 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -192,6 +192,9 @@ static struct sas_domain_function_template isci_transport_ops = {
/* Phy management */
.lldd_control_phy = isci_phy_control,
+
+ /* GPIO support */
+ .lldd_write_gpio = isci_gpio_write,
};
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index d1de63312e7f..8efeb6b08321 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -97,7 +97,7 @@
#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES))
#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
-#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024)
+#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024U)
#define SCU_INVALID_FRAME_INDEX (0xFFFF)
#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 09e61134037f..35f50c2183e1 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -1313,6 +1313,17 @@ int isci_phy_control(struct asd_sas_phy *sas_phy,
ret = isci_port_perform_hard_reset(ihost, iport, iphy);
break;
+ case PHY_FUNC_GET_EVENTS: {
+ struct scu_link_layer_registers __iomem *r;
+ struct sas_phy *phy = sas_phy->phy;
+
+ r = iphy->link_layer_registers;
+ phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
+ phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
+ phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
+ phy->invalid_dword_count = readl(&r->invalid_dword_counter);
+ break;
+ }
default:
dev_dbg(&ihost->pdev->dev,
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8f6f9b77e41a..8e59c8865dcd 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -294,8 +294,8 @@ static void isci_port_link_down(struct isci_host *isci_host,
__func__, isci_device);
set_bit(IDEV_GONE, &isci_device->flags);
}
+ isci_port_change_state(isci_port, isci_stopping);
}
- isci_port_change_state(isci_port, isci_stopping);
}
/* Notify libsas of the borken link, this will trigger calls to our
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
index 486b113c634a..38a99d281141 100644
--- a/drivers/scsi/isci/port_config.c
+++ b/drivers/scsi/isci/port_config.c
@@ -678,7 +678,7 @@ static void apc_agent_timeout(unsigned long data)
configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
if (!configure_phy_mask)
- return;
+ goto done;
for (index = 0; index < SCI_MAX_PHYS; index++) {
if ((configure_phy_mask & (1 << index)) == 0)
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 00afc738bbed..eaa541afc755 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -875,122 +875,6 @@ struct scu_iit_entry {
#define SCU_PTSxSR_GEN_BIT(name) \
SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name)
-
-/*
- * *****************************************************************************
- * * SGPIO Register shift and mask values
- * ***************************************************************************** */
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0)
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000)
-#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8)
-
-#define SCU_SGICRx_GEN_BIT(name) \
- SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name)
-
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000)
-
-#define SCU_SGPBRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0)
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000)
-#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSDLRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0)
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000)
-#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSDURx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDLRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDURx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0)
-
-#define SCU_SGVSCR_GEN_VAL(value) \
- SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value)
-
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000)
-
-#define SCU_SGODSR_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value)
-
-#define SCU_SGODSR_GEN_BIT(name) \
- SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name)
-
/*
* *****************************************************************************
* * SMU Registers
@@ -1529,10 +1413,12 @@ struct scu_sgpio_registers {
u32 serial_input_upper;
/* 0x0018 SGPIO_SGVSCR */
u32 vendor_specific_code;
+/* 0x001C Reserved */
+ u32 reserved_001c;
/* 0x0020 SGPIO_SGODSR */
- u32 ouput_data_select[8];
+ u32 output_data_select[8];
/* Remainder of memory space 256 bytes */
- u32 reserved_1444_14ff[0x31];
+ u32 reserved_1444_14ff[0x30];
};
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index b6e6368c2665..fbf9ce28c3f5 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -386,6 +386,18 @@ static bool is_remote_device_ready(struct isci_remote_device *idev)
}
}
+/*
+ * called once the remote node context has transisitioned to a ready
+ * state (after suspending RX and/or TX due to early D2H fis)
+ */
+static void atapi_remote_device_resume_done(void *_dev)
+{
+ struct isci_remote_device *idev = _dev;
+ struct isci_request *ireq = idev->working_request;
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+}
+
enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
u32 event_code)
{
@@ -432,6 +444,16 @@ enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
if (status != SCI_SUCCESS)
return status;
+ if (state == SCI_STP_DEV_ATAPI_ERROR) {
+ /* For ATAPI error state resume the RNC right away. */
+ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+ scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) {
+ return sci_remote_node_context_resume(&idev->rnc,
+ atapi_remote_device_resume_done,
+ idev);
+ }
+ }
+
if (state == SCI_STP_DEV_IDLE) {
/* We pick up suspension events to handle specifically to this
@@ -625,6 +647,7 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost,
case SCI_STP_DEV_CMD:
case SCI_STP_DEV_NCQ:
case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_ATAPI_ERROR:
status = common_complete_io(iport, idev, ireq);
if (status != SCI_SUCCESS)
break;
@@ -1020,6 +1043,7 @@ static const struct sci_base_state sci_remote_device_state_table[] = {
[SCI_STP_DEV_NCQ_ERROR] = {
.enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter,
},
+ [SCI_STP_DEV_ATAPI_ERROR] = { },
[SCI_STP_DEV_AWAIT_RESET] = { },
[SCI_SMP_DEV_IDLE] = {
.enter_state = sci_smp_remote_device_ready_idle_substate_enter,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 57ccfc3d6ad3..e1747ea0d0ea 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -244,6 +244,15 @@ enum sci_remote_device_states {
SCI_STP_DEV_NCQ_ERROR,
/**
+ * This is the ATAPI error state for the STP ATAPI remote device.
+ * This state is entered when ATAPI device sends error status FIS
+ * without data while the device object is in CMD state.
+ * A suspension event is expected in this state.
+ * The device object will resume right away.
+ */
+ SCI_STP_DEV_ATAPI_ERROR,
+
+ /**
* This is the READY substate indicates the device is waiting for the RESET task
* coming to be recovered from certain hardware specific error.
*/
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index b5d3a8c4d329..565a9f0a9bc2 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -481,7 +481,29 @@ static void sci_stp_optimized_request_construct(struct isci_request *ireq,
}
}
+static void sci_atapi_construct(struct isci_request *ireq)
+{
+ struct host_to_dev_fis *h2d_fis = &ireq->stp.cmd;
+ struct sas_task *task;
+
+ /* To simplify the implementation we take advantage of the
+ * silicon's partial acceleration of atapi protocol (dma data
+ * transfers), so we promote all commands to dma protocol. This
+ * breaks compatibility with ATA_HORKAGE_ATAPI_MOD16_DMA drives.
+ */
+ h2d_fis->features |= ATAPI_PKT_DMA;
+ scu_stp_raw_request_construct_task_context(ireq);
+
+ task = isci_request_access_task(ireq);
+ if (task->data_dir == DMA_NONE)
+ task->total_xfer_len = 0;
+
+ /* clear the response so we can detect arrivial of an
+ * unsolicited h2d fis
+ */
+ ireq->stp.rsp.fis_type = 0;
+}
static enum sci_status
sci_io_request_construct_sata(struct isci_request *ireq,
@@ -491,6 +513,7 @@ sci_io_request_construct_sata(struct isci_request *ireq,
{
enum sci_status status = SCI_SUCCESS;
struct sas_task *task = isci_request_access_task(ireq);
+ struct domain_device *dev = ireq->target_device->domain_dev;
/* check for management protocols */
if (ireq->ttype == tmf_task) {
@@ -519,6 +542,13 @@ sci_io_request_construct_sata(struct isci_request *ireq,
}
+ /* ATAPI */
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+ task->ata_task.fis.command == ATA_CMD_PACKET) {
+ sci_atapi_construct(ireq);
+ return SCI_SUCCESS;
+ }
+
/* non data */
if (task->data_dir == DMA_NONE) {
scu_stp_raw_request_construct_task_context(ireq);
@@ -627,7 +657,7 @@ enum sci_status sci_task_request_construct_sata(struct isci_request *ireq)
/**
* sci_req_tx_bytes - bytes transferred when reply underruns request
- * @sci_req: request that was terminated early
+ * @ireq: request that was terminated early
*/
#define SCU_TASK_CONTEXT_SRAM 0x200000
static u32 sci_req_tx_bytes(struct isci_request *ireq)
@@ -729,6 +759,10 @@ sci_io_request_terminate(struct isci_request *ireq)
case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
+ case SCI_REQ_ATAPI_WAIT_H2D:
+ case SCI_REQ_ATAPI_WAIT_PIO_SETUP:
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ case SCI_REQ_ATAPI_WAIT_TC_COMP:
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
return SCI_SUCCESS;
case SCI_REQ_TASK_WAIT_TC_RESP:
@@ -1194,8 +1228,8 @@ static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_re
{
struct isci_stp_request *stp_req = &ireq->stp.req;
struct scu_sgl_element_pair *sgl_pair;
+ enum sci_status status = SCI_SUCCESS;
struct scu_sgl_element *sgl;
- enum sci_status status;
u32 offset;
u32 len = 0;
@@ -1249,7 +1283,7 @@ static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_re
*/
static enum sci_status
sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req,
- u8 *data_buf, u32 len)
+ u8 *data_buf, u32 len)
{
struct isci_request *ireq;
u8 *src_addr;
@@ -1423,6 +1457,128 @@ static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_re
return status;
}
+static enum sci_status process_unsolicited_fis(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+ enum sci_status status;
+ struct dev_to_host_fis *frame_header;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (frame_header->fis_type != FIS_REGD2H) {
+ dev_err(&ireq->isci_host->pdev->dev,
+ "%s ERROR: invalid fis type 0x%X\n",
+ __func__, frame_header->fis_type);
+ return SCI_FAILURE;
+ }
+
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ (u32 *)frame_header,
+ frame_buffer);
+
+ /* Frame has been decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+}
+
+static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct sas_task *task = isci_request_access_task(ireq);
+ enum sci_status status;
+
+ status = process_unsolicited_fis(ireq, frame_index);
+
+ if (status == SCI_SUCCESS) {
+ if (ireq->stp.rsp.status & ATA_ERR)
+ status = SCI_IO_FAILURE_RESPONSE_VALID;
+ } else {
+ status = SCI_IO_FAILURE_RESPONSE_VALID;
+ }
+
+ if (status != SCI_SUCCESS) {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = status;
+ } else {
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ }
+
+ /* the d2h ufi is the end of non-data commands */
+ if (task->data_dir == DMA_NONE)
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+ return status;
+}
+
+static void scu_atapi_reconstruct_raw_frame_task_context(struct isci_request *ireq)
+{
+ struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+ void *atapi_cdb = ireq->ttype_ptr.io_task_ptr->ata_task.atapi_packet;
+ struct scu_task_context *task_context = ireq->tc;
+
+ /* fill in the SCU Task Context for a DATA fis containing CDB in Raw Frame
+ * type. The TC for previous Packet fis was already there, we only need to
+ * change the H2D fis content.
+ */
+ memset(&ireq->stp.cmd, 0, sizeof(struct host_to_dev_fis));
+ memcpy(((u8 *)&ireq->stp.cmd + sizeof(u32)), atapi_cdb, ATAPI_CDB_LEN);
+ memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context));
+ task_context->type.stp.fis_type = FIS_DATA;
+ task_context->transfer_length_bytes = dev->cdb_len;
+}
+
+static void scu_atapi_construct_task_context(struct isci_request *ireq)
+{
+ struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scu_task_context *task_context = ireq->tc;
+ int cdb_len = dev->cdb_len;
+
+ /* reference: SSTL 1.13.4.2
+ * task_type, sata_direction
+ */
+ if (task->data_dir == DMA_TO_DEVICE) {
+ task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT;
+ task_context->sata_direction = 0;
+ } else {
+ /* todo: for NO_DATA command, we need to send out raw frame. */
+ task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN;
+ task_context->sata_direction = 1;
+ }
+
+ memset(&task_context->type.stp, 0, sizeof(task_context->type.stp));
+ task_context->type.stp.fis_type = FIS_DATA;
+
+ memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
+ memcpy(&ireq->stp.cmd.lbal, task->ata_task.atapi_packet, cdb_len);
+ task_context->ssp_command_iu_length = cdb_len / sizeof(u32);
+
+ /* task phase is set to TX_CMD */
+ task_context->task_phase = 0x1;
+
+ /* retry counter */
+ task_context->stp_retry_count = 0;
+
+ /* data transfer size. */
+ task_context->transfer_length_bytes = task->total_xfer_len;
+
+ /* setup sgl */
+ sci_request_build_sgl(ireq);
+}
+
enum sci_status
sci_io_request_frame_handler(struct isci_request *ireq,
u32 frame_index)
@@ -1490,29 +1646,30 @@ sci_io_request_frame_handler(struct isci_request *ireq,
return SCI_SUCCESS;
case SCI_REQ_SMP_WAIT_RESP: {
- struct smp_resp *rsp_hdr = &ireq->smp.rsp;
- void *frame_header;
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scatterlist *sg = &task->smp_task.smp_resp;
+ void *frame_header, *kaddr;
+ u8 *rsp;
sci_unsolicited_frame_control_get_header(&ihost->uf_control,
- frame_index,
- &frame_header);
-
- /* byte swap the header. */
- word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
- sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);
+ frame_index,
+ &frame_header);
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ rsp = kaddr + sg->offset;
+ sci_swab32_cpy(rsp, frame_header, 1);
- if (rsp_hdr->frame_type == SMP_RESPONSE) {
+ if (rsp[0] == SMP_RESPONSE) {
void *smp_resp;
sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
- frame_index,
- &smp_resp);
-
- word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) /
- sizeof(u32);
+ frame_index,
+ &smp_resp);
- sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
- smp_resp, word_cnt);
+ word_cnt = (sg->length/4)-1;
+ if (word_cnt > 0)
+ word_cnt = min_t(unsigned int, word_cnt,
+ SCU_UNSOLICITED_FRAME_BUFFER_SIZE/4);
+ sci_swab32_cpy(rsp + 4, smp_resp, word_cnt);
ireq->scu_status = SCU_TASK_DONE_GOOD;
ireq->sci_status = SCI_SUCCESS;
@@ -1528,12 +1685,13 @@ sci_io_request_frame_handler(struct isci_request *ireq,
__func__,
ireq,
frame_index,
- rsp_hdr->frame_type);
+ rsp[0]);
ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR;
ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
}
+ kunmap_atomic(kaddr, KM_IRQ0);
sci_controller_release_frame(ihost, frame_index);
@@ -1833,6 +1991,24 @@ sci_io_request_frame_handler(struct isci_request *ireq,
return status;
}
+ case SCI_REQ_ATAPI_WAIT_PIO_SETUP: {
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ sci_controller_release_frame(ihost, frame_index);
+ ireq->target_device->working_request = ireq;
+ if (task->data_dir == DMA_NONE) {
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_TC_COMP);
+ scu_atapi_reconstruct_raw_frame_task_context(ireq);
+ } else {
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+ scu_atapi_construct_task_context(ireq);
+ }
+
+ sci_controller_continue_io(ireq);
+ return SCI_SUCCESS;
+ }
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ return atapi_d2h_reg_frame_handler(ireq, frame_index);
case SCI_REQ_ABORTING:
/*
* TODO: Is it even possible to get an unsolicited frame in the
@@ -1898,10 +2074,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
- case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
sci_remote_device_suspend(ireq->target_device,
SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
- /* Fall through to the default case */
+ /* Fall through to the default case */
default:
/* All other completion status cause the IO to be complete. */
ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
@@ -1964,6 +2139,112 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq,
return SCI_SUCCESS;
}
+static enum sci_status atapi_raw_completion(struct isci_request *ireq, u32 completion_code,
+ enum sci_base_request_states next)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, next);
+ break;
+ default:
+ /* All other completion status cause the IO to be complete.
+ * If a NAK was received, then it is up to the user to retry
+ * the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return status;
+}
+
+static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ireq,
+ u32 completion_code)
+{
+ struct isci_remote_device *idev = ireq->target_device;
+ struct dev_to_host_fis *d2h = &ireq->stp.rsp;
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): {
+ u16 len = sci_req_tx_bytes(ireq);
+
+ /* likely non-error data underrrun, workaround missing
+ * d2h frame from the controller
+ */
+ if (d2h->fis_type != FIS_REGD2H) {
+ d2h->fis_type = FIS_REGD2H;
+ d2h->flags = (1 << 6);
+ d2h->status = 0x50;
+ d2h->error = 0;
+ d2h->lbal = 0;
+ d2h->byte_count_low = len & 0xff;
+ d2h->byte_count_high = len >> 8;
+ d2h->device = 0xa0;
+ d2h->lbal_exp = 0;
+ d2h->lbam_exp = 0;
+ d2h->lbah_exp = 0;
+ d2h->_r_a = 0;
+ d2h->sector_count = 0x3;
+ d2h->sector_count_exp = 0;
+ d2h->_r_b = 0;
+ d2h->_r_c = 0;
+ d2h->_r_d = 0;
+ }
+
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY;
+ status = ireq->sci_status;
+
+ /* the hw will have suspended the rnc, so complete the
+ * request upon pending resume
+ */
+ sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+ break;
+ }
+ case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT):
+ /* In this case, there is no UF coming after.
+ * compelte the IO now.
+ */
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ default:
+ if (d2h->fis_type == FIS_REGD2H) {
+ /* UF received change the device state to ATAPI_ERROR */
+ status = ireq->sci_status;
+ sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+ } else {
+ /* If receiving any non-sucess TC status, no UF
+ * received yet, then an UF for the status fis
+ * is coming after (XXX: suspect this is
+ * actually a protocol error or a bug like the
+ * DONE_UNEXP_FIS case)
+ */
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+ }
+ break;
+ }
+
+ return status;
+}
+
enum sci_status
sci_io_request_tc_completion(struct isci_request *ireq,
u32 completion_code)
@@ -2015,6 +2296,17 @@ sci_io_request_tc_completion(struct isci_request *ireq,
return request_aborting_state_tc_event(ireq,
completion_code);
+ case SCI_REQ_ATAPI_WAIT_H2D:
+ return atapi_raw_completion(ireq, completion_code,
+ SCI_REQ_ATAPI_WAIT_PIO_SETUP);
+
+ case SCI_REQ_ATAPI_WAIT_TC_COMP:
+ return atapi_raw_completion(ireq, completion_code,
+ SCI_REQ_ATAPI_WAIT_D2H);
+
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ return atapi_data_tc_completion_handler(ireq, completion_code);
+
default:
dev_warn(&ihost->pdev->dev,
"%s: SCIC IO Request given task completion "
@@ -2421,6 +2713,8 @@ static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_
*/
if (fis->status & ATA_DF)
ts->stat = SAS_PROTO_RESPONSE;
+ else if (fis->status & ATA_ERR)
+ ts->stat = SAM_STAT_CHECK_CONDITION;
else
ts->stat = SAM_STAT_GOOD;
@@ -2603,18 +2897,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
status = SAM_STAT_GOOD;
set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
- if (task->task_proto == SAS_PROTOCOL_SMP) {
- void *rsp = &request->smp.rsp;
-
- dev_dbg(&ihost->pdev->dev,
- "%s: SMP protocol completion\n",
- __func__);
-
- sg_copy_from_buffer(
- &task->smp_task.smp_resp, 1,
- rsp, sizeof(struct smp_resp));
- } else if (completion_status
- == SCI_IO_SUCCESS_IO_DONE_EARLY) {
+ if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) {
/* This was an SSP / STP / SATA transfer.
* There is a possibility that less data than
@@ -2791,6 +3074,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
{
struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
struct domain_device *dev = ireq->target_device->domain_dev;
+ enum sci_base_request_states state;
struct sas_task *task;
/* XXX as hch said always creating an internal sas_task for tmf
@@ -2802,26 +3086,30 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
* substates
*/
if (!task && dev->dev_type == SAS_END_DEV) {
- sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
+ state = SCI_REQ_TASK_WAIT_TC_COMP;
} else if (!task &&
(isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
- sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
+ state = SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED;
} else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
- sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
+ state = SCI_REQ_SMP_WAIT_RESP;
} else if (task && sas_protocol_ata(task->task_proto) &&
!task->ata_task.use_ncq) {
- u32 state;
-
- if (task->data_dir == DMA_NONE)
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+ task->ata_task.fis.command == ATA_CMD_PACKET) {
+ state = SCI_REQ_ATAPI_WAIT_H2D;
+ } else if (task->data_dir == DMA_NONE) {
state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
- else if (task->ata_task.dma_xfer)
+ } else if (task->ata_task.dma_xfer) {
state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
- else /* PIO */
+ } else /* PIO */ {
state = SCI_REQ_STP_PIO_WAIT_H2D;
-
- sci_change_state(sm, state);
+ }
+ } else {
+ /* SSP or NCQ are fully accelerated, no substates */
+ return;
}
+ sci_change_state(sm, state);
}
static void sci_request_completed_state_enter(struct sci_base_state_machine *sm)
@@ -2913,6 +3201,10 @@ static const struct sci_base_state sci_request_state_table[] = {
[SCI_REQ_TASK_WAIT_TC_RESP] = { },
[SCI_REQ_SMP_WAIT_RESP] = { },
[SCI_REQ_SMP_WAIT_TC_COMP] = { },
+ [SCI_REQ_ATAPI_WAIT_H2D] = { },
+ [SCI_REQ_ATAPI_WAIT_PIO_SETUP] = { },
+ [SCI_REQ_ATAPI_WAIT_D2H] = { },
+ [SCI_REQ_ATAPI_WAIT_TC_COMP] = { },
[SCI_REQ_COMPLETED] = {
.enter_state = sci_request_completed_state_enter,
},
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index 7a1d5a9778eb..f720b97b7bb5 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -96,7 +96,6 @@ enum sci_request_protocol {
* to wait for another fis or if the transfer is complete. Upon
* receipt of a d2h fis this will be the status field of that fis.
* @sgl - track pio transfer progress as we iterate through the sgl
- * @device_cdb_len - atapi device advertises it's transfer constraints at setup
*/
struct isci_stp_request {
u32 pio_len;
@@ -107,7 +106,6 @@ struct isci_stp_request {
u8 set;
u32 offset;
} sgl;
- u32 device_cdb_len;
};
struct isci_request {
@@ -174,9 +172,6 @@ struct isci_request {
};
} ssp;
struct {
- struct smp_resp rsp;
- } smp;
- struct {
struct isci_stp_request req;
struct host_to_dev_fis cmd;
struct dev_to_host_fis rsp;
@@ -252,6 +247,32 @@ enum sci_base_request_states {
SCI_REQ_STP_PIO_DATA_OUT,
/*
+ * While in this state the IO request object is waiting for the TC
+ * completion notification for the H2D Register FIS
+ */
+ SCI_REQ_ATAPI_WAIT_H2D,
+
+ /*
+ * While in this state the IO request object is waiting for either a
+ * PIO Setup.
+ */
+ SCI_REQ_ATAPI_WAIT_PIO_SETUP,
+
+ /*
+ * The non-data IO transit to this state in this state after receiving
+ * TC completion. While in this state IO request object is waiting for
+ * D2H status frame as UF.
+ */
+ SCI_REQ_ATAPI_WAIT_D2H,
+
+ /*
+ * When transmitting raw frames hardware reports task context completion
+ * after every frame submission, so in the non-accelerated case we need
+ * to expect the completion for the "cdb" frame.
+ */
+ SCI_REQ_ATAPI_WAIT_TC_COMP,
+
+ /*
* The AWAIT_TC_COMPLETION sub-state indicates that the started raw
* task management request is waiting for the transmission of the
* initial frame (i.e. command, task, etc.).
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
index 462b15174d3f..dc26b4aea99e 100644
--- a/drivers/scsi/isci/sas.h
+++ b/drivers/scsi/isci/sas.h
@@ -204,8 +204,6 @@ struct smp_req {
u8 req_data[0];
} __packed;
-#define SMP_RESP_HDR_SZ 4
-
/*
* struct sci_sas_address - This structure depicts how a SAS address is
* represented by SCI.
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index d6bcdd013dc9..e2d9418683ce 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -1345,29 +1345,6 @@ static void isci_smp_task_done(struct sas_task *task)
complete(&task->completion);
}
-static struct sas_task *isci_alloc_task(void)
-{
- struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
-
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
-
- return task;
-}
-
-static void isci_free_task(struct isci_host *ihost, struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kfree(task);
- }
-}
-
static int isci_smp_execute_task(struct isci_host *ihost,
struct domain_device *dev, void *req,
int req_size, void *resp, int resp_size)
@@ -1376,7 +1353,7 @@ static int isci_smp_execute_task(struct isci_host *ihost,
struct sas_task *task = NULL;
for (retry = 0; retry < 3; retry++) {
- task = isci_alloc_task();
+ task = sas_alloc_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -1439,13 +1416,13 @@ static int isci_smp_execute_task(struct isci_host *ihost,
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat);
- isci_free_task(ihost, task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- isci_free_task(ihost, task);
+ sas_free_task(task);
return res;
}
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index 4a7fa90287ef..15b18d158993 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -286,6 +286,25 @@ isci_task_set_completion_status(
task->task_status.resp = response;
task->task_status.stat = status;
+ switch (task->task_proto) {
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+
+ if (task_notification_selection
+ == isci_perform_error_io_completion) {
+ /* SATA/STP I/O has it's own means of scheduling device
+ * error handling on the normal path.
+ */
+ task_notification_selection
+ = isci_perform_normal_io_completion;
+ }
+ break;
+ default:
+ break;
+ }
+
switch (task_notification_selection) {
case isci_perform_error_io_completion:
OpenPOWER on IntegriCloud