diff options
Diffstat (limited to 'drivers/scsi/isci/remote_device.h')
| -rw-r--r-- | drivers/scsi/isci/remote_device.h | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h new file mode 100644 index 000000000000..57ccfc3d6ad3 --- /dev/null +++ b/drivers/scsi/isci/remote_device.h @@ -0,0 +1,352 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REMOTE_DEVICE_H_ +#define _ISCI_REMOTE_DEVICE_H_ +#include <scsi/libsas.h> +#include <linux/kref.h> +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" + +enum sci_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX +}; + +/** + * isci_remote_device - isci representation of a sas expander / end point + * @device_port_width: hw setting for number of simultaneous connections + * @connection_rate: per-taskcontext connection rate for this device + * @working_request: SATA requests have no tag we for unaccelerated + * protocols we need a method to associate unsolicited + * frames with a pending request + */ +struct isci_remote_device { + #define IDEV_START_PENDING 0 + #define IDEV_STOP_PENDING 1 + #define IDEV_ALLOCATED 2 + #define IDEV_EH 3 + #define IDEV_GONE 4 + #define IDEV_IO_READY 5 + #define IDEV_IO_NCQERROR 6 + unsigned long flags; + struct kref kref; + struct isci_port *isci_port; + struct domain_device *domain_dev; + struct list_head node; + struct list_head reqs_in_process; + struct sci_base_state_machine sm; + u32 device_port_width; + enum sas_linkrate connection_rate; + bool is_direct_attached; + struct isci_port *owning_port; + struct sci_remote_node_context rnc; + /* XXX unify with device reference counting and delete */ + u32 started_request_count; + struct isci_request *working_request; + u32 not_ready_reason; +}; + +#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 + +/* device reference routines must be called under sci_lock */ +static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) +{ + struct isci_remote_device *idev = dev->lldd_dev; + + if (idev && !test_bit(IDEV_GONE, &idev->flags)) { + kref_get(&idev->kref); + return idev; + } + + return NULL; +} + +void isci_remote_device_release(struct kref *kref); +static inline void isci_put_device(struct isci_remote_device *idev) +{ + if (idev) + kref_put(&idev->kref, isci_remote_device_release); +} + +enum sci_status isci_remote_device_stop(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_nuke_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_gone(struct domain_device *domain_dev); +int isci_remote_device_found(struct domain_device *domain_dev); +bool isci_device_is_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_device_clear_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +/** + * sci_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status sci_remote_device_stop( + struct isci_remote_device *idev, + u32 timeout); + +/** + * sci_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status sci_remote_device_reset( + struct isci_remote_device *idev); + +/** + * sci_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status sci_remote_device_reset_complete( + struct isci_remote_device *idev); + +/** + * enum sci_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum sci_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_DEV_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_DEV_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_DEV_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_DEV_READY, + + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCI_STP_DEV_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCI_STP_DEV_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCI_STP_DEV_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCI_STP_DEV_NCQ_ERROR, + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCI_STP_DEV_AWAIT_RESET, + + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCI_SMP_DEV_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCI_SMP_DEV_CMD, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_DEV_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_DEV_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_DEV_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_DEV_FINAL, +}; + +static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) +{ + struct isci_remote_device *idev; + + idev = container_of(rnc, typeof(*idev), rnc); + + return idev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; +} + +static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) +{ + /* XXX delete this voodoo when converting to the top-level device + * reference count + */ + if (WARN_ONCE(idev->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + idev->started_request_count--; +} + +enum sci_status sci_remote_device_frame_handler( + struct isci_remote_device *idev, + u32 frame_index); + +enum sci_status sci_remote_device_event_handler( + struct isci_remote_device *idev, + u32 event_code); + +enum sci_status sci_remote_device_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_suspend( + struct isci_remote_device *idev, + u32 suspend_type); + +void sci_remote_device_post_request( + struct isci_remote_device *idev, + u32 request); + +#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ |
