summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/host.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/host.c')
-rw-r--r--drivers/scsi/isci/host.c69
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 6981b773a88d..f07f30fada1b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1263,6 +1263,10 @@ void isci_host_deinit(struct isci_host *ihost)
{
int i;
+ /* disable output data selects */
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+
isci_host_change_state(ihost, isci_stopping);
for (i = 0; i < SCI_MAX_PORTS; i++) {
struct isci_port *iport = &ihost->ports[i];
@@ -1281,6 +1285,12 @@ void isci_host_deinit(struct isci_host *ihost)
spin_unlock_irq(&ihost->scic_lock);
wait_for_stop(ihost);
+
+ /* disable sgpio: where the above wait should give time for the
+ * enclosure to sample the gpios going inactive
+ */
+ writel(0, &ihost->scu_registers->peg0.sgpio.interface_control);
+
sci_controller_reset(ihost);
/* Cancel any/all outstanding port timers */
@@ -2365,6 +2375,12 @@ int isci_host_init(struct isci_host *ihost)
for (i = 0; i < SCI_MAX_PHYS; i++)
isci_phy_init(&ihost->phys[i], ihost, i);
+ /* enable sgpio */
+ writel(1, &ihost->scu_registers->peg0.sgpio.interface_control);
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+ writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code);
+
for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
struct isci_remote_device *idev = &ihost->devices[i];
@@ -2760,3 +2776,56 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
return status;
}
+
+static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data)
+{
+ int d;
+
+ /* no support for TX_GP_CFG */
+ if (reg_index == 0)
+ return -EINVAL;
+
+ for (d = 0; d < isci_gpio_count(ihost); d++) {
+ u32 val = 0x444; /* all ODx.n clear */
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ int bit = (i << 2) + 2;
+
+ bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
+ write_data, reg_index,
+ reg_count);
+ if (bit < 0)
+ break;
+
+ /* if od is set, clear the 'invert' bit */
+ val &= ~(bit << ((i << 2) + 2));
+ }
+
+ if (i < 3)
+ break;
+ writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]);
+ }
+
+ /* unless reg_index is > 1, we should always be able to write at
+ * least one register
+ */
+ return d > 0;
+}
+
+int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ struct isci_host *ihost = sas_ha->lldd_ha;
+ int written;
+
+ switch (reg_type) {
+ case SAS_GPIO_REG_TX_GP:
+ written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data);
+ break;
+ default:
+ written = -EINVAL;
+ }
+
+ return written;
+}
OpenPOWER on IntegriCloud