diff options
Diffstat (limited to 'drivers/scsi/hpsa.c')
| -rw-r--r-- | drivers/scsi/hpsa.c | 3531 |
1 files changed, 3531 insertions, 0 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c new file mode 100644 index 000000000000..bb96fdd58e23 --- /dev/null +++ b/drivers/scsi/hpsa.c @@ -0,0 +1,3531 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/timer.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/blktrace_api.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/completion.h> +#include <linux/moduleparam.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <linux/cciss_ioctl.h> +#include <linux/string.h> +#include <linux/bitmap.h> +#include <asm/atomic.h> +#include <linux/kthread.h> +#include "hpsa_cmd.h" +#include "hpsa.h" + +/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ +#define HPSA_DRIVER_VERSION "1.0.0" +#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" + +/* How long to wait (in milliseconds) for board to go into simple mode */ +#define MAX_CONFIG_WAIT 30000 +#define MAX_IOCTL_CONFIG_WAIT 1000 + +/*define how many times we will try a command because of bus resets */ +#define MAX_CMD_RETRIES 3 + +/* Embedded module documentation macros - see modules.h */ +MODULE_AUTHOR("Hewlett-Packard Company"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ + HPSA_DRIVER_VERSION); +MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); +MODULE_VERSION(HPSA_DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static int hpsa_allow_any; +module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(hpsa_allow_any, + "Allow hpsa driver to access unknown HP Smart Array hardware"); + +/* define the PCI info for the cards we can control */ +static const struct pci_device_id hpsa_pci_device_id[] = { + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, + {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); + +/* board_id = Subsystem Device ID & Vendor ID + * product = Marketing Name for the board + * access = Address of the struct of function pointers + */ +static struct board_type products[] = { + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x323d103c, "Smart Array P700M", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324a103C, "Smart Array P712m", &SA5_access}, + {0x324b103C, "Smart Array P711m", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, +}; + +static int number_of_controllers; + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id); +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); +static void start_io(struct ctlr_info *h); + +#ifdef CONFIG_COMPAT +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); +#endif + +static void cmd_free(struct ctlr_info *h, struct CommandList *c); +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); +static struct CommandList *cmd_alloc(struct ctlr_info *h); +static struct CommandList *cmd_special_alloc(struct ctlr_info *h); +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)); + +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); +static int hpsa_slave_alloc(struct scsi_device *sdev); +static void hpsa_slave_destroy(struct scsi_device *sdev); + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf); +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c); +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c); + +static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); + +static struct device_attribute *hpsa_sdev_attrs[] = { + &dev_attr_raid_level, + &dev_attr_lunid, + &dev_attr_unique_id, + NULL, +}; + +static struct device_attribute *hpsa_shost_attrs[] = { + &dev_attr_rescan, + NULL, +}; + +static struct scsi_host_template hpsa_driver_template = { + .module = THIS_MODULE, + .name = "hpsa", + .proc_name = "hpsa", + .queuecommand = hpsa_scsi_queue_command, + .can_queue = 512, + .this_id = -1, + .sg_tablesize = MAXSGENTRIES, + .cmd_per_lun = 512, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = hpsa_eh_device_reset_handler, + .ioctl = hpsa_ioctl, + .slave_alloc = hpsa_slave_alloc, + .slave_destroy = hpsa_slave_destroy, +#ifdef CONFIG_COMPAT + .compat_ioctl = hpsa_compat_ioctl, +#endif + .sdev_attrs = hpsa_sdev_attrs, + .shost_attrs = hpsa_shost_attrs, +}; + +static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) +{ + unsigned long *priv = shost_priv(sdev->host); + return (struct ctlr_info *) *priv; +} + +static struct task_struct *hpsa_scan_thread; +static DEFINE_MUTEX(hpsa_scan_mutex); +static LIST_HEAD(hpsa_scan_q); +static int hpsa_scan_func(void *data); + +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + /* + * If we don't get the lock, it means the driver is unloading + * and there's no point in scheduling a new scan. + */ + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry(test_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + INIT_COMPLETION(h->scan_wait); + list_add_tail(&h->scan_list, &hpsa_scan_q); + ret = 1; + } + mutex_unlock(&hpsa_scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. The controller + * can be in one of three states: + * 1. Doesn't need a scan + * 2. On the scan list, but not scanning yet (we remove it) + * 3. Busy scanning (and not on the list). In this case we want to wait for + * the scan to complete to make sure the scanning thread for this + * controller is completely idle. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { /* state 2. */ + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&hpsa_scan_mutex); + return; + } + } + if (h->busy_scanning) { /* state 3. */ + mutex_unlock(&hpsa_scan_mutex); + wait_for_completion(&h->scan_wait); + } else { /* state 1, nothing to do. */ + mutex_unlock(&hpsa_scan_mutex); + } +} + +/* hpsa_scan_func() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ +static int hpsa_scan_func(__attribute__((unused)) void *data) +{ + struct ctlr_info *h; + int host_no; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) + break; + + while (1) { + mutex_lock(&hpsa_scan_mutex); + if (list_empty(&hpsa_scan_q)) { + mutex_unlock(&hpsa_scan_mutex); + break; + } + h = list_entry(hpsa_scan_q.next, struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&hpsa_scan_mutex); + host_no = h->scsi_host ? h->scsi_host->host_no : -1; + hpsa_update_scsi_devices(h, host_no); + complete_all(&h->scan_wait); + mutex_lock(&hpsa_scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&hpsa_scan_mutex); + } + } + return 0; +} + +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) + return 0; + + switch (c->err_info->SenseInfo[12]) { + case STATE_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: a state change " + "detected, command retried\n", h->ctlr); + break; + case LUN_FAILED: + dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " + "detected, action required\n", h->ctlr); + break; + case REPORT_LUNS_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " + "changed\n", h->ctlr); + /* + * Here, we could call add_to_scan_list and wake up the scan thread, + * except that it's quite likely that we will get more than one + * REPORT_LUNS_CHANGED condition in quick succession, which means + * that those which occur after the first one will likely happen + * *during* the hpsa_scan_thread's rescan. And the rescan code is not + * robust enough to restart in the middle, undoing what it has already + * done, and it's not clear that it's even possible to do this, since + * part of what it does is notify the SCSI mid layer, which starts + * doing it's own i/o to read partition tables and so on, and the + * driver doesn't have visibility to know what might need undoing. + * In any event, if possible, it is horribly complicated to get right + * so we just don't do it for now. + * + * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + */ + break; + case POWER_OR_RESET: + dev_warn(&h->pdev->dev, "hpsa%d: a power on " + "or device reset detected\n", h->ctlr); + break; + case UNIT_ATTENTION_CLEARED: + dev_warn(&h->pdev->dev, "hpsa%d: unit attention " + "cleared by another initiator\n", h->ctlr); + break; + default: + dev_warn(&h->pdev->dev, "hpsa%d: unknown " + "unit attention detected\n", h->ctlr); + break; + } + return 1; +} + +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h; + struct Scsi_Host *shost = class_to_shost(dev); + unsigned long *priv = shost_priv(shost); + h = (struct ctlr_info *) *priv; + if (add_to_scan_list(h)) { + wake_up_process(hpsa_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + } + return count; +} + +/* Enqueuing and dequeuing functions for cmdlists. */ +static inline void addQ(struct hlist_head *list, struct CommandList *c) +{ + hlist_add_head(&c->list, list); +} + +static void enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c) +{ + unsigned long flags; + spin_lock_irqsave(&h->lock, flags); + addQ(&h->reqQ, c); + h->Qdepth++; + start_io(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static inline void removeQ(struct CommandList *c) +{ + if (WARN_ON(hlist_unhashed(&c->list))) + return; + hlist_del_init(&c->list); +} + +static inline int is_hba_lunid(unsigned char scsi3addr[]) +{ + return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; +} + +static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) +{ + return (scsi3addr[3] & 0xC0) == 0x40; +} + +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t l = 0; + int rlevel; + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + + /* Is this even a logical drive? */ + if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { + spin_unlock_irqrestore(&h->lock, flags); + l = snprintf(buf, PAGE_SIZE, "N/A\n"); + return l; + } + + rlevel = hdev->raid_level; + spin_unlock_irqrestore(&h->lock, flags); + if (rlevel < 0 || rlevel > RAID_UNKNOWN) + rlevel = RAID_UNKNOWN; + l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); + return l; +} + +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char lunid[8]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} + +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char sn[16]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(sn, hdev->device_id, sizeof(sn)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} + +static int hpsa_find_target_lun(struct ctlr_info *h, + unsigned char scsi3addr[], int bus, int *target, int *lun) +{ + /* finds an unused bus, target, lun for a new physical device + * assumes h->devlock is held + */ + int i, found = 0; + DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); + + memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); + + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i]->bus == bus && h->dev[i]->target != -1) + set_bit(h->dev[i]->target, lun_taken); + } + + for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { + if (!test_bit(i, lun_taken)) { + /* *bus = 1; */ + *target = i; + *lun = 0; + found = 1; + break; + } + } + return !found; +} + +/* Add an entry into h->dev[] array. */ +static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *device, + struct hpsa_scsi_dev_t *added[], int *nadded) +{ + /* assumes h->devlock is held */ + int n = h->ndevices; + int i; + unsigned char addr1[8], addr2[8]; + struct hpsa_scsi_dev_t *sd; + + if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { + dev_err(&h->pdev->dev, "too many devices, some will be " + "inaccessible.\n"); + return -1; + } + + /* physical devices do not have lun or target assigned until now. */ + if (device->lun != -1) + /* Logical device, lun is already assigned. */ + goto lun_assigned; + + /* If this device a non-zero lun of a multi-lun device + * byte 4 of the 8-byte LUN addr will contain the logical + * unit no, zero otherise. + */ + if (device->scsi3addr[4] == 0) { + /* This is not a non-zero lun of a multi-lun device */ + if (hpsa_find_target_lun(h, device->scsi3addr, + device->bus, &device->target, &device->lun) != 0) + return -1; + goto lun_assigned; + } + + /* This is a non-zero lun of a multi-lun device. + * Search through our list and find the device which + * has the same 8 byte LUN address, excepting byte 4. + * Assign the same bus and target for this new LUN. + * Use the logical unit number from the firmware. + */ + memcpy(addr1, device->scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = h->dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + device->bus = sd->bus; + device->target = sd->target; + device->lun = device->scsi3addr[4]; + break; + } + } + if (device->lun == -1) { + dev_warn(&h->pdev->dev, "physical device with no LUN=0," + " suspect firmware bug or unsupported hardware " + "configuration.\n"); + return -1; + } + +lun_assigned: + + h->dev[n] = device; + h->ndevices++; + added[*nadded] = device; + (*nadded)++; + + /* initially, (before registering with scsi layer) we don't + * know our hostno and we don't want to print anything first + * time anyway (the scsi layer's inquiries will show that info) + */ + /* if (hostno != -1) */ + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", + scsi_device_type(device->devtype), hostno, + device->bus, device->target, device->lun); + return 0; +} + +/* Remove an entry from h->dev[] array. */ +static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, + struct hpsa_scsi_dev_t *removed[], int *nremoved) +{ + /* assumes h->devlock is held */ + int i; + struct hpsa_scsi_dev_t *sd; + + if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA) + BUG(); + + sd = h->dev[entry]; + removed[*nremoved] = h->dev[entry]; + (*nremoved)++; + + for (i = entry; i < h->ndevices-1; i++) + h->dev[i] = h->dev[i+1]; + h->ndevices--; + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", + scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, + sd->lun); +} + +#define SCSI3ADDR_EQ(a, b) ( \ + (a)[7] == (b)[7] && \ + (a)[6] == (b)[6] && \ + (a)[5] == (b)[5] && \ + (a)[4] == (b)[4] && \ + (a)[3] == (b)[3] && \ + (a)[2] == (b)[2] && \ + (a)[1] == (b)[1] && \ + (a)[0] == (b)[0]) + +static void fixup_botched_add(struct ctlr_info *h, + struct hpsa_scsi_dev_t *added) +{ + /* called when scsi_add_device fails in order to re-adjust + * h->dev[] to match the mid layer's view. + */ + unsigned long flags; + int i, j; + + spin_lock_irqsave(&h->lock, flags); + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i] == added) { + for (j = i; j < h->ndevices-1; j++) + h->dev[j] = h->dev[j+1]; + h->ndevices--; + break; + } + } + spin_unlock_irqrestore(&h->lock, flags); + kfree(added); +} + +static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, + struct hpsa_scsi_dev_t *dev2) +{ + if ((is_logical_dev_addr_mode(dev1->scsi3addr) || + (dev1->lun != -1 && dev2->lun != -1)) && + dev1->devtype != 0x0C) + return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); + + /* we compare everything except lun and target as these + * are not yet assigned. Compare parts likely + * to differ first + */ + if (memcmp(dev1->scsi3addr, dev2->scsi3addr, + sizeof(dev1->scsi3addr)) != 0) + return 0; + if (memcmp(dev1->device_id, dev2->device_id, + sizeof(dev1->device_id)) != 0) + return 0; + if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) + return 0; + if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) + return 0; + if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) + return 0; + if (dev1->devtype != dev2->devtype) + return 0; + if (dev1->raid_level != dev2->raid_level) + return 0; + if (dev1->bus != dev2->bus) + return 0; + return 1; +} + +/* Find needle in haystack. If exact match found, return DEVICE_SAME, + * and return needle location in *index. If scsi3addr matches, but not + * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle + * location in *index. If needle not found, return DEVICE_NOT_FOUND. + */ +static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, + struct hpsa_scsi_dev_t *haystack[], int haystack_size, + int *index) +{ + int i; +#define DEVICE_NOT_FOUND 0 +#define DEVICE_CHANGED 1 +#define DEVICE_SAME 2 + for (i = 0; i < haystack_size; i++) { + if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { + *index = i; + if (device_is_the_same(needle, haystack[i])) + return DEVICE_SAME; + else + return DEVICE_CHANGED; + } + } + *index = -1; + return DEVICE_NOT_FOUND; +} + +static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *sd[], int nsds) +{ + /* sd contains scsi3 addresses and devtypes, and inquiry + * data. This function takes what's in sd to be the current + * reality and updates h->dev[] to reflect that reality. + */ + int i, entry, device_change, changes = 0; + struct hpsa_scsi_dev_t *csd; + unsigned long flags; + struct hpsa_scsi_dev_t **added, **removed; + int nadded, nremoved; + struct Scsi_Host *sh = NULL; + + added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + + if (!added || !removed) { + dev_warn(&h->pdev->dev, "out of memory in " + "adjust_hpsa_scsi_table\n"); + goto free_and_out; + } + + spin_lock_irqsave(&h->devlock, flags); + + /* find any devices in h->dev[] that are not in + * sd[] and remove them from h->dev[], and for any + * devices which have changed, remove the old device + * info and add the new device info. + */ + i = 0; + nremoved = 0; + nadded = 0; + while (i < h->ndevices) { + csd = h->dev[i]; + device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + continue; /* remove ^^^, hence i not incremented */ + } else if (device_change == DEVICE_CHANGED) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + (void) hpsa_scsi_add_entry(h, hostno, sd[entry], + added, &nadded); + /* add can't fail, we just removed one. */ + sd[entry] = NULL; /* prevent it from being freed */ + } + i++; + } + + /* Now, make sure every device listed in sd[] is also + * listed in h->dev[], adding them if they aren't found + */ + + for (i = 0; i < nsds; i++) { + if (!sd[i]) /* if already added above. */ + continue; + device_change = hpsa_scsi_find_entry(sd[i], h->dev, + h->ndevices, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + if (hpsa_scsi_add_entry(h, hostno, sd[i], + added, &nadded) != 0) + break; + sd[i] = NULL; /* prevent from being freed later. */ + } else if (device_change == DEVICE_CHANGED) { + /* should never happen... */ + changes++; + dev_warn(&h->pdev->dev, + "device unexpectedly changed.\n"); + /* but if it does happen, we just ignore that device */ + } + } + spin_unlock_irqrestore(&h->devlock, flags); + + /* Don't notify scsi mid layer of any changes the first time through + * (or if there are no changes) scsi_scan_host will do it later the + * first time through. + */ + if (hostno == -1 || !changes) + goto free_and_out; + + sh = h->scsi_host; + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i]->bus, + removed[i]->target, removed[i]->lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. + * future cmds to this device will get selection + * timeout as if the device was gone. + */ + dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " + " for removal.", hostno, removed[i]->bus, + removed[i]->target, removed[i]->lun); + } + kfree(removed[i]); + removed[i] = NULL; + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + if (scsi_add_device(sh, added[i]->bus, + added[i]->target, added[i]->lun) == 0) + continue; + dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " + "device not added.\n", hostno, added[i]->bus, + added[i]->target, added[i]->lun); + /* now we have to remove it from h->dev, + * since it didn't get added to scsi mid layer + */ + fixup_botched_add(h, added[i]); + } + +free_and_out: + kfree(added); + kfree(removed); + return 0; +} + +/* + * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Assume's h->devlock is held. + */ +static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, + int bus, int target, int lun) +{ + int i; + struct hpsa_scsi_dev_t *sd; + + for (i = 0; i < h->ndevices; i++) { + sd = h->dev[i]; + if (sd->bus == bus && sd->target == target && sd->lun == lun) + return sd; + } + return NULL; +} + +/* link sdev->hostdata to our per-device structure. */ +static int hpsa_slave_alloc(struct scsi_device *sdev) +{ + struct hpsa_scsi_dev_t *sd; + unsigned long flags; + struct ctlr_info *h; + + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->devlock, flags); + sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), + sdev_id(sdev), sdev->lun); + if (sd != NULL) + sdev->hostdata = sd; + spin_unlock_irqrestore(&h->devlock, flags); + return 0; +} + +static void hpsa_slave_destroy(struct scsi_device *sdev) +{ + return; /* nothing to do. */ +} + +static void hpsa_scsi_setup(struct ctlr_info *h) +{ + h->ndevices = 0; + h->scsi_host = NULL; + spin_lock_init(&h->devlock); + return; +} + +static void complete_scsi_command(struct CommandList *cp, + int timeout, __u32 tag) +{ + struct scsi_cmnd *cmd; + struct ctlr_info *h; + struct ErrorInfo *ei; + + unsigned char sense_key; + unsigned char asc; /* additional sense code */ + unsigned char ascq; /* additional sense code qualifier */ + + ei = cp->err_info; + cmd = (struct scsi_cmnd *) cp->scsi_cmd; + h = cp->h; + + scsi_dma_unmap(cmd); /* undo the DMA mappings */ + + cmd->result = (DID_OK << 16); /* host byte */ + cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + cmd->result |= (ei->ScsiStatus << 1); + + /* copy the sense data whether we need to or not. */ + memcpy(cmd->sense_buffer, ei->SenseInfo, + ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? + SCSI_SENSE_BUFFERSIZE : + ei->SenseLen); + scsi_set_resid(cmd, ei->ResidualCnt); + + if (ei->CommandStatus == 0) { + cmd->scsi_done(cmd); + cmd_free(h, cp); + return; + } + + /* an error has occurred */ + switch (ei->CommandStatus) { + + case CMD_TARGET_STATUS: + if (ei->ScsiStatus) { + /* Get sense key */ + sense_key = 0xf & ei->SenseInfo[2]; + /* Get additional sense code */ + asc = ei->SenseInfo[12]; + /* Get addition sense code qualifier */ + ascq = ei->SenseInfo[13]; + } + + if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { + if (check_for_unit_attention(h, cp)) { + cmd->result = DID_SOFT_ERROR << 16; + break; + } + if (sense_key == ILLEGAL_REQUEST) { + /* + * SCSI REPORT_LUNS is commonly unsupported on + * Smart Array. Suppress noisy complaint. + */ + if (cp->Request.CDB[0] == REPORT_LUNS) + break; + + /* If ASC/ASCQ indicate Logical Unit + * Not Supported condition, + */ + if ((asc == 0x25) && (ascq == 0x0)) { + dev_warn(&h->pdev->dev, "cp %p " + "has check condition\n", cp); + break; + } + } + + if (sense_key == NOT_READY) { + /* If Sense is Not Ready, Logical Unit + * Not ready, Manual Intervention + * required + */ + if ((asc == 0x04) && (ascq == 0x03)) { + cmd->result = DID_NO_CONNECT << 16; + dev_warn(&h->pdev->dev, "cp %p " + "has check condition: unit " + "not ready, manual " + "intervention required\n", cp); + break; + } + } + + + /* Must be some other type of check condition */ + dev_warn(&h->pdev->dev, "cp %p has check condition: " + "unknown type: " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x, " + "cmd=[%02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x]\n", + cp, sense_key, asc, ascq, + cmd->result, + cmd->cmnd[0], cmd->cmnd[1], + cmd->cmnd[2], cmd->cmnd[3], + cmd->cmnd[4], cmd->cmnd[5], + cmd->cmnd[6], cmd->cmnd[7], + cmd->cmnd[8], cmd->cmnd[9]); + break; + } + + + /* Problem was not a check condition + * Pass it up to the upper layers... + */ + if (ei->ScsiStatus) { + dev_warn(&h->pdev->dev, "cp %p has status 0x%x " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x\n", + cp, ei->ScsiStatus, + sense_key, asc, ascq, + cmd->result); + } else { /* scsi status is zero??? How??? */ + dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " + "Returning no connection.\n", cp), + + /* Ordinarily, this case should never happen, + * but there is a bug in some released firmware + * revisions that allows it to happen if, for + * example, a 4100 backplane loses power and + * the tape drive is in it. We assume that + * it's a fatal error of some kind because we + * can't show that it wasn't. We will make it + * look like selection timeout since that is + * the most common reason for this to occur, + * and it's severe enough. + */ + + cmd->result = DID_NO_CONNECT << 16; + } + break; + + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + break; + case CMD_DATA_OVERRUN: + dev_warn(&h->pdev->dev, "cp %p has" + " completed with data overrun " + "reported\n", cp); + break; + case CMD_INVALID: { + /* print_bytes(cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + /* We get CMD_INVALID if you address a non-existent device + * instead of a selection timeout (no response). You will + * see this if you yank out a drive, then try to access it. + * This is kind of a shame because it means that any other + * CMD_INVALID (e.g. driver bug) will get interpreted as a + * missing target. */ + cmd->result = DID_NO_CONNECT << 16; + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cp %p has " + "protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", + cp, ei->ScsiStatus); + break; + case CMD_ABORT_FAILED: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " + "abort\n", cp); + break; + case CMD_TIMEOUT: + cmd->result = DID_TIME_OUT << 16; + dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); + break; + default: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", + cp, ei->CommandStatus); + } + cmd->scsi_done(cmd); + cmd_free(h, cp); +} + +static int hpsa_scsi_detect(struct ctlr_info *h) +{ + struct Scsi_Host *sh; + int error; + + sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); + if (sh == NULL) + goto fail; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->this_id = -1; + sh->max_channel = 3; + sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_lun = HPSA_MAX_LUN; + sh->max_id = HPSA_MAX_LUN; + h->scsi_host = sh; + sh->hostdata[0] = (unsigned long) h; + sh->irq = h->intr[SIMPLE_MODE_INT]; + sh->unique_id = sh->irq; + error = scsi_add_host(sh, &h->pdev->dev); + if (error) + goto fail_host_put; + scsi_scan_host(sh); + return 0; + + fail_host_put: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" + " failed for controller %d\n", h->ctlr); + scsi_host_put(sh); + return -1; + fail: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" + " failed for controller %d\n", h->ctlr); + return -1; +} + +static void hpsa_pci_unmap(struct pci_dev *pdev, + struct CommandList *c, int sg_used, int data_direction) +{ + int i; + union u64bit addr64; + + for (i = 0; i < sg_used; i++) { + addr64.val32.lower = c->SG[i].Addr.lower; + addr64.val32.upper = c->SG[i].Addr.upper; + pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, + data_direction); + } +} + +static void hpsa_map_one(struct pci_dev *pdev, + struct CommandList *cp, + unsigned char *buf, + size_t buflen, + int data_direction) +{ + __u64 addr64; + + if (buflen == 0 || data_direction == PCI_DMA_NONE) { + cp->Header.SGList = 0; + cp->Header.SGTotal = 0; + return; + } + + addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction); + cp->SG[0].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Len = buflen; + cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */ +} + +static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, + struct CommandList *c) +{ + DECLARE_COMPLETION_ONSTACK(wait); + + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); +} + +static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, + struct CommandList *c, int data_direction) +{ + int retry_count = 0; + + do { + memset(c->err_info, 0, sizeof(c->err_info)); + hpsa_scsi_do_simple_cmd_core(h, c); + retry_count++; + } while (check_for_unit_attention(h, c) && retry_count <= 3); + hpsa_pci_unmap(h->pdev, c, 1, data_direction); +} + +static void hpsa_scsi_interpret_error(struct CommandList *cp) +{ + struct ErrorInfo *ei; + struct device *d = &cp->h->pdev->dev; + + ei = cp->err_info; + switch (ei->CommandStatus) { + case CMD_TARGET_STATUS: + dev_warn(d, "cmd %p has completed with errors\n", cp); + dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, + ei->ScsiStatus); + if (ei->ScsiStatus == 0) + dev_warn(d, "SCSI status is abnormally zero. " + "(probably indicates selection timeout " + "reported incorrectly due to a known " + "firmware bug, circa July, 2001.)\n"); + break; + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + dev_info(d, "UNDERRUN\n"); + break; + case CMD_DATA_OVERRUN: + dev_warn(d, "cp %p has completed with data overrun\n", cp); + break; + case CMD_INVALID: { + /* controller unfortunately reports SCSI passthru's + * to non-existent targets as invalid commands. + */ + dev_warn(d, "cp %p is reported invalid (probably means " + "target device no longer present)\n", cp); + /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(d, "cp %p has protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + /* cmd->result = DID_ERROR << 16; */ + dev_warn(d, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + dev_warn(d, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + dev_warn(d, "cp %p was aborted\n", cp); + break; + case CMD_ABORT_FAILED: + dev_warn(d, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); + break; + case CMD_TIMEOUT: + dev_warn(d, "cp %p timed out\n", cp); + break; + default: + dev_warn(d, "cp %p returned unknown status %x\n", cp, + ei->CommandStatus); + } +} + +static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char page, unsigned char *buf, + unsigned char bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + ei = c->err_info; + if (ei->CommandStatus != 0) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static void hpsa_get_raid_level(struct ctlr_info *h, + unsigned char *scsi3addr, unsigned char *raid_level) +{ + int rc; + unsigned char *buf; + + *raid_level = RAID_UNKNOWN; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); + if (rc == 0) + *raid_level = buf[8]; + if (*raid_level > RAID_UNKNOWN) + *raid_level = RAID_UNKNOWN; + kfree(buf); + return; +} + +/* Get the device id from inquiry page 0x83 */ +static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char *device_id, int buflen) +{ + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return -1; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); + if (rc == 0) + memcpy(device_id, &buf[8], buflen); + kfree(buf); + return rc != 0; +} + +static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, + struct ReportLUNdata *buf, int bufsize, + int extended_response) +{ + int rc = IO_OK; + struct CommandList *c; + unsigned char scsi3addr[8]; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + memset(&scsi3addr[0], 0, 8); /* address the controller */ + + fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, + buf, bufsize, 0, scsi3addr, TYPE_CMD); + if (extended_response) + c->Request.CDB[1] = extended_response; + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && + ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, + int bufsize, int extended_response) +{ + return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); +} + +static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, int bufsize) +{ + return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); +} + +static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, + int bus, int target, int lun) +{ + device->bus = bus; + device->target = target; + device->lun = lun; +} + +static int hpsa_update_device_info(struct ctlr_info *h, + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) +{ +#define OBDR_TAPE_INQ_SIZE 49 + unsigned char *inq_buff = NULL; + + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + if (!inq_buff) + goto bail_out; + + memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); + /* Do an inquiry to the device to see what it is. */ + if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, + (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { + /* Inquiry failed (msg printed already) */ + dev_err(&h->pdev->dev, + "hpsa_update_device_info: inquiry failed\n"); + goto bail_out; + } + + /* As a side effect, record the firmware version number + * if we happen to be talking to the RAID controller. + */ + if (is_hba_lunid(scsi3addr)) + memcpy(h->firm_ver, &inq_buff[32], 4); + + this_device->devtype = (inq_buff[0] & 0x1f); + memcpy(this_device->scsi3addr, scsi3addr, 8); + memcpy(this_device->vendor, &inq_buff[8], + sizeof(this_device->vendor)); + memcpy(this_device->model, &inq_buff[16], + sizeof(this_device->model)); + memcpy(this_device->revision, &inq_buff[32], + sizeof(this_device->revision)); + memset(this_device->device_id, 0, + sizeof(this_device->device_id)); + hpsa_get_device_id(h, scsi3addr, this_device->device_id, + sizeof(this_device->device_id)); + + if (this_device->devtype == TYPE_DISK && + is_logical_dev_addr_mode(scsi3addr)) + hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); + else + this_device->raid_level = RAID_UNKNOWN; + + kfree(inq_buff); + return 0; + +bail_out: + kfree(inq_buff); + return 1; +} + +static unsigned char *msa2xxx_model[] = { + "MSA2012", + "MSA2024", + "MSA2312", + "MSA2324", + NULL, +}; + +static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +{ + int i; + + for (i = 0; msa2xxx_model[i]; i++) + if (strncmp(device->model, msa2xxx_model[i], + strlen(msa2xxx_model[i])) == 0) + return 1; + return 0; +} + +/* Helper function to assign bus, target, lun mapping of devices. + * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical + * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. + * Logical drive target and lun are assigned at this time, but + * physical device lun and target assignment are deferred (assigned + * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) + */ +static void figure_bus_target_lun(struct ctlr_info *h, + __u8 *lunaddrbytes, int *bus, int *target, int *lun, + struct hpsa_scsi_dev_t *device) +{ + + __u32 lunid; + + if (is_logical_dev_addr_mode(lunaddrbytes)) { + /* logical device */ + memcpy(&lunid, lunaddrbytes, sizeof(lunid)); + lunid = le32_to_cpu(lunid); + + if (is_msa2xxx(h, device)) { + *bus = 1; + *target = (lunid >> 16) & 0x3fff; + *lun = lunid & 0x00ff; + } else { + *bus = 0; + *lun = 0; + *target = lunid & 0x3fff; + } + } else { + /* physical device */ + if (is_hba_lunid(lunaddrbytes)) + *bus = 3; + else + *bus = 2; + *target = -1; + *lun = -1; /* we will fill these in later. */ + } +} + +/* + * If there is no lun 0 on a target, linux won't find any devices. + * For the MSA2xxx boxes, we have to manually detect the enclosure + * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report + * it for some reason. *tmpdevice is the target we're adding, + * this_device is a pointer into the current element of currentsd[] + * that we're building up in update_scsi_devices(), below. + * lunzerobits is a bitmap that tracks which targets already have a + * lun 0 assigned. + * Returns 1 if an enclosure was added, 0 if not. + */ +static int add_msa2xxx_enclosure_device(struct ctlr_info *h, + struct hpsa_scsi_dev_t *tmpdevice, + struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes, + int bus, int target, int lun, unsigned long lunzerobits[], + int *nmsa2xxx_enclosures) +{ + unsigned char scsi3addr[8]; + + if (test_bit(target, lunzerobits)) + return 0; /* There is already a lun 0 on this target. */ + + if (!is_logical_dev_addr_mode(lunaddrbytes)) + return 0; /* It's the logical targets that may lack lun 0. */ + + if (!is_msa2xxx(h, tmpdevice)) + return 0; /* It's only the MSA2xxx that have this problem. */ + + if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ + return 0; + + if (is_hba_lunid(scsi3addr)) + return 0; /* Don't add the RAID controller here. */ + +#define MAX_MSA2XXX_ENCLOSURES 32 + if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { + dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " + "enclosures exceeded. Check your hardware " + "configuration."); + return 0; + } + + memset(scsi3addr, 0, 8); + scsi3addr[3] = target; + if (hpsa_update_device_info(h, scsi3addr, this_device)) + return 0; + (*nmsa2xxx_enclosures)++; + hpsa_set_bus_target_lun(this_device, bus, target, 0); + set_bit(target, lunzerobits); + return 1; +} + +/* + * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, + * logdev. The number of luns in physdev and logdev are returned in + * *nphysicals and *nlogicals, respectively. + * Returns 0 on success, -1 otherwise. + */ +static int hpsa_gather_lun_info(struct ctlr_info *h, + int reportlunsize, + struct ReportLUNdata *physdev, __u32 *nphysicals, + struct ReportLUNdata *logdev, __u32 *nlogicals) +{ + if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { + dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); + return -1; + } + memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals)); + *nphysicals = be32_to_cpu(*nphysicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals); +#endif + if (*nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." + " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals - HPSA_MAX_PHYS_LUN); + *nphysicals = HPSA_MAX_PHYS_LUN; + } + if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { + dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); + return -1; + } + memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals)); + *nlogicals = be32_to_cpu(*nlogicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals); +#endif + /* Reject Logicals in excess of our max capability. */ + if (*nlogicals > HPSA_MAX_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_LUN, + *nlogicals - HPSA_MAX_LUN); + *nlogicals = HPSA_MAX_LUN; + } + if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical + physical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); + *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; + } + return 0; +} + +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) +{ + /* the idea here is we could get notified + * that some devices have changed, so we do a report + * physical luns and report logical luns cmd, and adjust + * our list of devices accordingly. + * + * The scsi3addr's of devices won't change so long as the + * adapter is not reset. That means we can rescan and + * tell which devices we already know about, vs. new + * devices, vs. disappearing devices. + */ + struct ReportLUNdata *physdev_list = NULL; + struct ReportLUNdata *logdev_list = NULL; + unsigned char *inq_buff = NULL; + __u32 nphysicals = 0; + __u32 nlogicals = 0; + __u32 ndev_allocated = 0; + struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; + int ncurrent = 0; + int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; + int i, nmsa2xxx_enclosures, ndevs_to_allocate; + int bus, target, lun; + DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); + + currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + physdev_list = kzalloc(reportlunsize, GFP_KERNEL); + logdev_list = kzalloc(reportlunsize, GFP_KERNEL); + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); + + if (!currentsd || !physdev_list || !logdev_list || + !inq_buff || !tmpdevice) { + dev_err(&h->pdev->dev, "out of memory\n"); + goto out; + } + memset(lunzerobits, 0, sizeof(lunzerobits)); + + if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, + logdev_list, &nlogicals)) + goto out; + + /* We might see up to 32 MSA2xxx enclosures, actually 8 of them + * but each of them 4 times through different paths. The plus 1 + * is for the RAID controller. + */ + ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; + + /* Allocate the per device structures */ + for (i = 0; i < ndevs_to_allocate; i++) { + currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); + if (!currentsd[i]) { + dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", + __FILE__, __LINE__); + goto out; + } + ndev_allocated++; + } + + /* adjust our table of devices */ + nmsa2xxx_enclosures = 0; + for (i = 0; i < nphysicals + nlogicals + 1; i++) { + __u8 *lunaddrbytes; + + /* Figure out where the LUN ID info is coming from */ + if (i < nphysicals) + lunaddrbytes = &physdev_list->LUN[i][0]; + else + if (i < nphysicals + nlogicals) + lunaddrbytes = + &logdev_list->LUN[i-nphysicals][0]; + else /* jam in the RAID controller at the end */ + lunaddrbytes = RAID_CTLR_LUNID; + + /* skip masked physical devices. */ + if (lunaddrbytes[3] & 0xC0 && i < nphysicals) + continue; + + /* Get device type, vendor, model, device id */ + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + continue; /* skip it if we can't talk to it. */ + figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, + tmpdevice); + this_device = currentsd[ncurrent]; + + /* + * For the msa2xxx boxes, we have to insert a LUN 0 which + * doesn't show up in CCISS_REPORT_PHYSICAL data, but there + * is nonetheless an enclosure device there. We have to + * present that otherwise linux won't find anything if + * there is no lun 0. + */ + if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, + lunaddrbytes, bus, target, lun, lunzerobits, + &nmsa2xxx_enclosures)) { + ncurrent++; + this_device = currentsd[ncurrent]; + } + + *this_device = *tmpdevice; + hpsa_set_bus_target_lun(this_device, bus, target, lun); + + switch (this_device->devtype) { + case TYPE_ROM: { + /* We don't *really* support actual CD-ROM devices, + * just "One Button Disaster Recovery" tape drive + * which temporarily pretends to be a CD-ROM drive. + * So we check that the device is really an OBDR tape + * device by checking for "$DR-10" in bytes 43-48 of + * the inquiry data. + */ + char obdr_sig[7]; +#define OBDR_TAPE_SIG "$DR-10" + strncpy(obdr_sig, &inq_buff[43], 6); + obdr_sig[6] = '\0'; + if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) + /* Not OBDR device, ignore it. */ + break; + } + ncurrent++; + break; + case TYPE_DISK: + if (i < nphysicals) + break; + ncurrent++; + break; + case TYPE_TAPE: + case TYPE_MEDIUM_CHANGER: + ncurrent++; + break; + case TYPE_RAID: + /* Only present the Smartarray HBA as a RAID controller. + * If it's a RAID controller other than the HBA itself + * (an external RAID controller, MSA500 or similar) + * don't present it. + */ + if (!is_hba_lunid(lunaddrbytes)) + break; + ncurrent++; + break; + default: + break; + } + if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) + break; + } + adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); +out: + kfree(tmpdevice); + for (i = 0; i < ndev_allocated; i++) + kfree(currentsd[i]); + kfree(currentsd); + kfree(inq_buff); + kfree(physdev_list); + kfree(logdev_list); + return; +} + +/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci + * dma mapping and fills in the scatter gather entries of the + * hpsa command, cp. + */ +static int hpsa_scatter_gather(struct pci_dev *pdev, + struct CommandList *cp, + struct scsi_cmnd *cmd) +{ + unsigned int len; + struct scatterlist *sg; + __u64 addr64; + int use_sg, i; + + BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); + + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) + return use_sg; + + if (!use_sg) + goto sglist_finished; + + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (__u64) sg_dma_address(sg); + len = sg_dma_len(sg); + cp->SG[i].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Len = len; + cp->SG[i].Ext = 0; /* we are not chaining */ + } + +sglist_finished: + + cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */ + return 0; +} + + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + unsigned char scsi3addr[8]; + struct CommandList *c; + unsigned long flags; + + /* Get the ptr to our adapter structure out of cmd->host. */ + h = sdev_to_hba(cmd->device); + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } + memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); + + /* Need a lock as this is being allocated from the pool */ + spin_lock_irqsave(&h->lock, flags); + c = cmd_alloc(h); + spin_unlock_irqrestore(&h->lock, flags); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* Fill in the command list header */ + + cmd->scsi_done = done; /* save this for use by completion code */ + + /* save c in case we have to abort it */ + cmd->host_scribble = (unsigned char *) c; + + c->cmd_type = CMD_SCSI; + c->scsi_cmd = cmd; + c->Header.ReplyQueue = 0; /* unused in simple mode */ + memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); + c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ + + /* Fill in the request block... */ + + c->Request.Timeout = 0; + memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); + BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); + c->Request.CDBLen = cmd->cmd_len; + memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); + c->Request.Type.Type = TYPE_CMD; + c->Request.Type.Attribute = ATTR_SIMPLE; + switch (cmd->sc_data_direction) { + case DMA_TO_DEVICE: + c->Request.Type.Direction = XFER_WRITE; + break; + case DMA_FROM_DEVICE: + c->Request.Type.Direction = XFER_READ; + break; + case DMA_NONE: + c->Request.Type.Direction = XFER_NONE; + break; + case DMA_BIDIRECTIONAL: + /* This can happen if a buggy application does a scsi passthru + * and sets both inlen and outlen to non-zero. ( see + * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) + */ + + c->Request.Type.Direction = XFER_RSVD; + /* This is technically wrong, and hpsa controllers should + * reject it with CMD_INVALID, which is the most correct + * response, but non-fibre backends appear to let it + * slide by, and give the same results as if this field + * were set correctly. Either way is acceptable for + * our purposes here. + */ + + break; + + default: + dev_err(&h->pdev->dev, "unknown data direction: %d\n", + cmd->sc_data_direction); + BUG(); + break; + } + + if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + enqueue_cmd_and_start_io(h, c); + /* the cmd'll come back via intr handler in complete_scsi_command() */ + return 0; +} + +static void hpsa_unregister_scsi(struct ctlr_info *h) +{ + /* we are being forcibly unloaded, and may not refuse. */ + scsi_remove_host(h->scsi_host); + scsi_host_put(h->scsi_host); + h->scsi_host = NULL; +} + +static int hpsa_register_scsi(struct ctlr_info *h) +{ + int rc; + + hpsa_update_scsi_devices(h, -1); + rc = hpsa_scsi_detect(h); + if (rc != 0) + dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" + " hpsa_scsi_detect(), rc is %d\n", rc); + return rc; +} + +static int wait_for_device_to_become_ready(struct ctlr_info *h, + unsigned char lunaddr[]) +{ + int rc = 0; + int count = 0; + int waittime = 1; /* seconds */ + struct CommandList *c; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "out of memory in " + "wait_for_device_to_become_ready.\n"); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < HPSA_TUR_RETRY_LIMIT) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + msleep(1000 * waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + if (c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + dev_warn(&h->pdev->dev, "waiting %d secs " + "for device to become ready.\n", waittime); + rc = 1; /* device not ready. */ + } + + if (rc) + dev_warn(&h->pdev->dev, "giving up on device.\n"); + else + dev_warn(&h->pdev->dev, "device is ready.\n"); + + cmd_special_free(h, c); + return rc; +} + +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. + */ +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + + /* find the controller to which the command to be aborted was sent */ + h = sdev_to_hba(scsicmd->device); + if (h == NULL) /* paranoia */ + return FAILED; + dev_warn(&h->pdev->dev, "resetting drive\n"); + + dev = scsicmd->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " + "device lookup failed.\n"); + return FAILED; + } + /* send a reset to the SCSI LUN which the command was sent to */ + rc = hpsa_send_reset(h, dev->scsi3addr); + if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) + return SUCCESS; + + dev_warn(&h->pdev->dev, "resetting device failed.\n"); + return FAILED; +} + +/* + * For operations that cannot sleep, a command block is allocated at init, + * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track + * which ones are free or in use. Lock must be held when calling this. + * cmd_free() is the complement. + */ +static struct CommandList *cmd_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + int i; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + do { + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) + return NULL; + } while (test_and_set_bit + (i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); + c = h->cmd_pool + i; + memset(c, 0, sizeof(*c)); + cmd_dma_handle = h->cmd_pool_dhandle + + i * sizeof(*c); + c->err_info = h->errinfo_pool + i; + memset(c->err_info, 0, sizeof(*c->err_info)); + err_dma_handle = h->errinfo_pool_dhandle + + i * sizeof(*c->err_info); + h->nr_allocs++; + + c->cmdindex = i; + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +/* For operations that can wait for kmalloc to possibly sleep, + * this routine can be called. Lock need not be held to call + * cmd_special_alloc. cmd_special_free() is the complement. + */ +static struct CommandList *cmd_special_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); + if (c == NULL) + return NULL; + memset(c, 0, sizeof(*c)); + + c->cmdindex = -1; + + c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), + &err_dma_handle); + + if (c->err_info == NULL) { + pci_free_consistent(h->pdev, + sizeof(*c), c, cmd_dma_handle); + return NULL; + } + memset(c->err_info, 0, sizeof(*c->err_info)); + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +static void cmd_free(struct ctlr_info *h, struct CommandList *c) +{ + int i; + + i = c - h->cmd_pool; + clear_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + h->nr_frees++; +} + +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) +{ + union u64bit temp64; + + temp64.val32.lower = c->ErrDesc.Addr.lower; + temp64.val32.upper = c->ErrDesc.Addr.upper; + pci_free_consistent(h->pdev, sizeof(*c->err_info), + c->err_info, (dma_addr_t) temp64.val); + pci_free_consistent(h->pdev, sizeof(*c), + c, (dma_addr_t) c->busaddr); +} + +#ifdef CONFIG_COMPAT + +static int do_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + int ret; + + lock_kernel(); + ret = hpsa_ioctl(dev, cmd, arg); + unlock_kernel(); + return ret; +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg); +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg); + +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + switch (cmd) { + case CCISS_GETPCIINFO: + case CCISS_GETINTINFO: + case CCISS_SETINTINFO: + case CCISS_GETNODENAME: + case CCISS_SETNODENAME: + case CCISS_GETHEARTBEAT: + case CCISS_GETBUSTYPES: + case CCISS_GETFIRMVER: + case CCISS_GETDRIVVER: + case CCISS_REVALIDVOLS: + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + case CCISS_RESCANDISK: + case CCISS_GETLUNINFO: + return do_ioctl(dev, cmd, arg); + + case CCISS_PASSTHRU32: + return hpsa_ioctl32_passthru(dev, cmd, arg); + case CCISS_BIG_PASSTHRU32: + return hpsa_ioctl32_big_passthru(dev, cmd, arg); + + default: + return -ENOIOCTLCMD; + } +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) +{ + IOCTL32_Command_struct __user *arg32 = + (IOCTL32_Command_struct __user *) arg; + IOCTL_Command_struct arg64; + IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} + +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg) +{ + BIG_IOCTL32_Command_struct __user *arg32 = + (BIG_IOCTL32_Command_struct __user *) arg; + BIG_IOCTL_Command_struct arg64; + BIG_IOCTL_Command_struct __user *p = + compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(arg64.malloc_size, &arg32->malloc_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} +#endif + +static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) +{ + struct hpsa_pci_info pciinfo; + + if (!argp) + return -EINVAL; + pciinfo.domain = pci_domain_nr(h->pdev->bus); + pciinfo.bus = h->pdev->bus->number; + pciinfo.dev_fn = h->pdev->devfn; + pciinfo.board_id = h->board_id; + if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) + return -EFAULT; + return 0; +} + +static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) +{ + DriverVer_type DriverVer; + unsigned char vmaj, vmin, vsubmin; + int rc; + + rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", + &vmaj, &vmin, &vsubmin); + if (rc != 3) { + dev_info(&h->pdev->dev, "driver version string '%s' " + "unrecognized.", HPSA_DRIVER_VERSION); + vmaj = 0; + vmin = 0; + vsubmin = 0; + } + DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; + if (!argp) + return -EINVAL; + if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) + return -EFAULT; + return 0; +} + +static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + IOCTL_Command_struct iocommand; + struct CommandList *c; + char *buff = NULL; + union u64bit temp64; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (copy_from_user(&iocommand, argp, sizeof(iocommand))) + return -EFAULT; + if ((iocommand.buf_size < 1) && + (iocommand.Request.Type.Direction != XFER_NONE)) { + return -EINVAL; + } + if (iocommand.buf_size > 0) { + buff = kmalloc(iocommand.buf_size, GFP_KERNEL); + if (buff == NULL) + return -EFAULT; + } + if (iocommand.Request.Type.Direction == XFER_WRITE) { + /* Copy the data into the buffer we created */ + if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { + kfree(buff); + return -EFAULT; + } + } else + memset(buff, 0, iocommand.buf_size); + c = cmd_special_alloc(h); + if (c == NULL) { + kfree(buff); + return -ENOMEM; + } + /* Fill in the command type */ + c->cmd_type = CMD_IOCTL_PEND; + /* Fill in Command Header */ + c->Header.ReplyQueue = 0; /* unused in simple mode */ + if (iocommand.buf_size > 0) { /* buffer to fill */ + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { /* no buffers to fill */ + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); + /* use the kernel address the cmd block for tag */ + c->Header.Tag.lower = c->busaddr; + + /* Fill in Request block */ + memcpy(&c->Request, &iocommand.Request, + sizeof(c->Request)); + + /* Fill in the scatter gather information */ + if (iocommand.buf_size > 0) { + temp64.val = pci_map_single(h->pdev, buff, + iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + c->SG[0].Addr.lower = temp64.val32.lower; + c->SG[0].Addr.upper = temp64.val32.upper; + c->SG[0].Len = iocommand.buf_size; + c->SG[0].Ext = 0; /* we are not chaining*/ + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + + /* Copy the error information out */ + memcpy(&iocommand.error_info, c->err_info, + sizeof(iocommand.error_info)); + if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + + if (iocommand.Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + } + kfree(buff); + cmd_special_free(h, c); + return 0; +} + +static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + BIG_IOCTL_Command_struct *ioc; + struct CommandList *c; + unsigned char **buff = NULL; + int *buff_size = NULL; + union u64bit temp64; + BYTE sg_used = 0; + int status = 0; + int i; + __u32 left; + __u32 sz; + BYTE __user *data_ptr; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + ioc = (BIG_IOCTL_Command_struct *) + kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) { + status = -ENOMEM; + goto cleanup1; + } + if (copy_from_user(ioc, argp, sizeof(*ioc))) { + status = -EFAULT; + goto cleanup1; + } + if ((ioc->buf_size < 1) && + (ioc->Request.Type.Direction != XFER_NONE)) { + status = -EINVAL; + goto cleanup1; + } + /* Check kmalloc limits using all SGs */ + if (ioc->malloc_size > MAX_KMALLOC_SIZE) { + status = -EINVAL; + goto cleanup1; + } + if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + status = -EINVAL; + goto cleanup1; + } + buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + if (!buff) { + status = -ENOMEM; + goto cleanup1; + } + buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + if (!buff_size) { + status = -ENOMEM; + goto cleanup1; + } + left = ioc->buf_size; + data_ptr = ioc->buf; + while (left) { + sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; + buff_size[sg_used] = sz; + buff[sg_used] = kmalloc(sz, GFP_KERNEL); + if (buff[sg_used] == NULL) { + status = -ENOMEM; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { + status = -ENOMEM; + goto cleanup1; + } + } else + memset(buff[sg_used], 0, sz); + left -= sz; + data_ptr += sz; + sg_used++; + } + c = cmd_special_alloc(h); + if (c == NULL) { + status = -ENOMEM; + goto cleanup1; + } + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + + if (ioc->buf_size > 0) { + c->Header.SGList = sg_used; + c->Header.SGTotal = sg_used; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); + c->Header.Tag.lower = c->busaddr; + memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); + if (ioc->buf_size > 0) { + int i; + for (i = 0; i < sg_used; i++) { + temp64.val = pci_map_single(h->pdev, buff[i], + buff_size[i], PCI_DMA_BIDIRECTIONAL); + c->SG[i].Addr.lower = temp64.val32.lower; + c->SG[i].Addr.upper = temp64.val32.upper; + c->SG[i].Len = buff_size[i]; + /* we are not chaining */ + c->SG[i].Ext = 0; + } + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + /* Copy the error information out */ + memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); + if (copy_to_user(argp, ioc, sizeof(*ioc))) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + BYTE __user *ptr = ioc->buf; + for (i = 0; i < sg_used; i++) { + if (copy_to_user(ptr, buff[i], buff_size[i])) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + ptr += buff_size[i]; + } + } + cmd_special_free(h, c); + status = 0; +cleanup1: + if (buff) { + for (i = 0; i < sg_used; i++) + kfree(buff[i]); + kfree(buff); + } + kfree(buff_size); + kfree(ioc); + return status; +} + +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) + (void) check_for_unit_attention(h, c); +} +/* + * ioctl + */ +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + struct ctlr_info *h; + void __user *argp = (void __user *)arg; + + h = sdev_to_hba(dev); + + switch (cmd) { + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + hpsa_update_scsi_devices(h, dev->host->host_no); + return 0; + case CCISS_GETPCIINFO: + return hpsa_getpciinfo_ioctl(h, argp); + case CCISS_GETDRIVVER: + return hpsa_getdrivver_ioctl(h, argp); + case CCISS_PASSTHRU: + return hpsa_passthru_ioctl(h, argp); + case CCISS_BIG_PASSTHRU: + return hpsa_big_passthru_ioctl(h, argp); + default: + return -ENOTTY; + } +} + +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) +{ + int pci_dir = XFER_NONE; + + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + if (buff != NULL && size > 0) { + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + + c->Request.Type.Type = cmd_type; + if (cmd_type == TYPE_CMD) { + switch (cmd) { + case HPSA_INQUIRY: + /* are we trying to read a vital product page */ + if (page_code != 0) { + c->Request.CDB[1] = 0x01; + c->Request.CDB[2] = page_code; + } + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = HPSA_INQUIRY; + c->Request.CDB[4] = size & 0xFF; + break; + case HPSA_REPORT_LOG: + case HPSA_REPORT_PHYS: + /* Talking to controller so It's a physical command + mode = 00 target = 0. Nothing to write. + */ + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0xFF; + c->Request.CDB[9] = size & 0xFF; + break; + + case HPSA_READ_CAPACITY: + c->Request.CDBLen = 10; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + break; + case HPSA_CACHE_FLUSH: + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_WRITE; + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_WRITE; + c->Request.CDB[6] = BMIC_CACHE_FLUSH; + break; + case TEST_UNIT_READY: + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; + default: + dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); + BUG(); + return; + } + } else if (cmd_type == TYPE_MSG) { + switch (cmd) { + + case HPSA_DEVICE_RESET_MSG: + c->Request.CDBLen = 16; + c->Request.Type.Type = 1; /* It is a MSG not a CMD */ + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; /* Don't time out */ + c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ + c->Request.CDB[1] = 0x03; /* Reset target above */ + /* If bytes 4-7 are zero, it means reset the */ + /* LunID device */ + c->Request.CDB[4] = 0x00; + c->Request.CDB[5] = 0x00; + c->Request.CDB[6] = 0x00; + c->Request.CDB[7] = 0x00; + break; + + default: + dev_warn(&h->pdev->dev, "unknown message type %d\n", + cmd); + BUG(); + } + } else { + dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); + BUG(); + } + + switch (c->Request.Type.Direction) { + case XFER_READ: + pci_dir = PCI_DMA_FROMDEVICE; + break; + case XFER_WRITE: + pci_dir = PCI_DMA_TODEVICE; + break; + case XFER_NONE: + pci_dir = PCI_DMA_NONE; + break; + default: + pci_dir = PCI_DMA_BIDIRECTIONAL; + } + + hpsa_map_one(h->pdev, c, buff, size, pci_dir); + + return; +} + +/* + * Map (physical) PCI mem into (virtual) kernel space + */ +static void __iomem *remap_pci_mem(ulong base, ulong size) +{ + ulong page_base = ((ulong) base) & PAGE_MASK; + ulong page_offs = ((ulong) base) - page_base; + void __iomem *page_remapped = ioremap(page_base, page_offs + size); + + return page_remapped ? (page_remapped + page_offs) : NULL; +} + +/* Takes cmds off the submission queue and sends them to the hardware, + * then puts them on the queue of cmds waiting for completion. + */ +static void start_io(struct ctlr_info *h) +{ + struct CommandList *c; + + while (!hlist_empty(&h->reqQ)) { + c = hlist_entry(h->reqQ.first, struct CommandList, list); + /* can't do anything if fifo is full */ + if ((h->access.fifo_full(h))) { + dev_warn(&h->pdev->dev, "fifo full\n"); + break; + } + + /* Get the first entry from the Request Q */ + removeQ(c); + h->Qdepth--; + + /* Tell the controller execute command */ + h->access.submit_command(h, c); + + /* Put job onto the completed Q */ + addQ(&h->cmpQ, c); + } +} + +static inline unsigned long get_next_completion(struct ctlr_info *h) +{ + return h->access.command_completed(h); +} + +static inline int interrupt_pending(struct ctlr_info *h) +{ + return h->access.intr_pending(h); +} + +static inline long interrupt_not_for_us(struct ctlr_info *h) +{ + return ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); +} + +static inline int bad_tag(struct ctlr_info *h, __u32 tag_index, + __u32 raw_tag) +{ + if (unlikely(tag_index >= h->nr_cmds)) { + dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); + return 1; + } + return 0; +} + +static inline void finish_cmd(struct CommandList *c, __u32 raw_tag) +{ + removeQ(c); + if (likely(c->cmd_type == CMD_SCSI)) + complete_scsi_command(c, 0, raw_tag); + else if (c->cmd_type == CMD_IOCTL_PEND) + complete(c->waiting); +} + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id) +{ + struct ctlr_info *h = dev_id; + struct CommandList *c; + unsigned long flags; + __u32 raw_tag, tag, tag_index; + struct hlist_node *tmp; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) { + if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) { + tag_index = HPSA_TAG_TO_INDEX(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return IRQ_HANDLED; + c = h->cmd_pool + tag_index; + finish_cmd(c, raw_tag); + continue; + } + tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag); + c = NULL; + hlist_for_each_entry(c, tmp, &h->cmpQ, list) { + if (c->busaddr == tag) { + finish_cmd(c, raw_tag); + break; + } + } + } + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +/* Send a message CDB to the firmware. */ +static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, + unsigned char type) +{ + struct Command { + struct CommandListHeader CommandHeader; + struct RequestBlock Request; + struct ErrDescriptor ErrorDescriptor; + }; + struct Command *cmd; + static const size_t cmd_sz = sizeof(*cmd) + + sizeof(cmd->ErrorDescriptor); + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = pci_ioremap_bar(pdev, 0); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + * CCISS commands, so they must be allocated from the lower 4GiB of + * memory. + */ + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + * although there's no guarantee, we assume that the address is at + * least 4-byte aligned (most likely, it's page-aligned). + */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32) + break; + msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + * still complete the command. + */ + if (i == HPSA_MSG_SEND_RETRY_LIMIT) { + dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & HPSA_ERROR_BIT) { + dev_err(&pdev->dev, "controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0) +#define hpsa_noop(p) hpsa_message(p, 3, 0) + +static __devinit int hpsa_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. + */ +static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + * + * pci_save_state(pci_dev); + * pci_set_power_state(pci_dev, PCI_D3hot); + * pci_set_power_state(pci_dev, PCI_D0); + * pci_restore_state(pci_dev); + * + * but we can't use these nice canned kernel routines on + * kexec, because they also check the MSI/MSI-X state in PCI + * configuration space and do the wrong thing when it is + * set/cleared. Also, the pci_save/restore_state functions + * violate the ordering requirements for restoring the + * configuration space from the CCISS document (see the + * comment below). So we roll our own .... + */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + dev_err(&pdev->dev, + "hpsa_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." + */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. + */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + +/* + * We cannot read the structure directly, for portability we must use + * the io functions. + * This is for debug only. + */ +#ifdef HPSA_DEBUG +static void print_cfg_table(struct device *dev, struct CfgTable *tb) +{ + int i; + char temp_name[17]; + + dev_info(dev, "Controller Configuration information\n"); + dev_info(dev, "------------------------------------\n"); + for (i = 0; i < 4; i++) + temp_name[i] = readb(&(tb->Signature[i])); + temp_name[4] = '\0'; + dev_info(dev, " Signature = %s\n", temp_name); + dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); + dev_info(dev, " Transport methods supported = 0x%x\n", + readl(&(tb->TransportSupport))); + dev_info(dev, " Transport methods active = 0x%x\n", + readl(&(tb->TransportActive))); + dev_info(dev, " Requested transport Method = 0x%x\n", + readl(&(tb->HostWrite.TransportRequest))); + dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", + readl(&(tb->HostWrite.CoalIntDelay))); + dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", + readl(&(tb->HostWrite.CoalIntCount))); + dev_info(dev, " Max outstanding commands = 0x%d\n", + readl(&(tb->CmdsOutMax))); + dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); + for (i = 0; i < 16; i++) + temp_name[i] = readb(&(tb->ServerName[i])); + temp_name[16] = '\0'; + dev_info(dev, " Server Name = %s\n", temp_name); + dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", + readl(&(tb->HeartBeat))); +} +#endif /* HPSA_DEBUG */ + +static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) +{ + int i, offset, mem_type, bar_type; + + if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ + return 0; + offset = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; + if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) + offset += 4; + else { + mem_type = pci_resource_flags(pdev, i) & + PCI_BASE_ADDRESS_MEM_TYPE_MASK; + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + offset += 4; /* 32 bit */ + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + offset += 8; + break; + default: /* reserved in PCI 2.2 */ + dev_warn(&pdev->dev, + "base address is invalid\n"); + return -1; + break; + } + } + if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) + return i + 1; + } + return -1; +} + +/* If MSI/MSI-X is supported by the kernel we will try to enable it on + * controllers that are capable. If not, we use IO-APIC mode. + */ + +static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, + struct pci_dev *pdev, __u32 board_id) +{ +#ifdef CONFIG_PCI_MSI + int err; + struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1}, + {0, 2}, {0, 3} + }; + + /* Some boards advertise MSI but don't really support it */ + if ((board_id == 0x40700E11) || + (board_id == 0x40800E11) || + (board_id == 0x40820E11) || (board_id == 0x40830E11)) + goto default_int_mode; + if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { + dev_info(&pdev->dev, "MSIX\n"); + err = pci_enable_msix(pdev, hpsa_msix_entries, 4); + if (!err) { + h->intr[0] = hpsa_msix_entries[0].vector; + h->intr[1] = hpsa_msix_entries[1].vector; + h->intr[2] = hpsa_msix_entries[2].vector; + h->intr[3] = hpsa_msix_entries[3].vector; + h->msix_vector = 1; + return; + } + if (err > 0) { + dev_warn(&pdev->dev, "only %d MSI-X vectors " + "available\n", err); + goto default_int_mode; + } else { + dev_warn(&pdev->dev, "MSI-X init failed %d\n", + err); + goto default_int_mode; + } + } + if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { + dev_info(&pdev->dev, "MSI\n"); + if (!pci_enable_msi(pdev)) + h->msi_vector = 1; + else + dev_warn(&pdev->dev, "MSI init failed\n"); + } +default_int_mode: +#endif /* CONFIG_PCI_MSI */ + /* if we get here we're going to use the default interrupt mode */ + h->intr[SIMPLE_MODE_INT] = pdev->irq; + return; +} + +static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) +{ + ushort subsystem_vendor_id, subsystem_device_id, command; + __u32 board_id, scratchpad = 0; + __u64 cfg_offset; + __u32 cfg_base_addr; + __u64 cfg_base_addr_index; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) + if (board_id == products[i].board_id) + break; + + prod_index = i; + + if (prod_index == ARRAY_SIZE(products)) { + prod_index--; + if (subsystem_vendor_id != PCI_VENDOR_ID_HP || + !hpsa_allow_any) { + dev_warn(&pdev->dev, "unrecognized board ID:" + " 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } + } + /* check to see if controller has been disabled + * BEFORE trying to enable it + */ + (void)pci_read_config_word(pdev, PCI_COMMAND, &command); + if (!(command & 0x02)) { + dev_warn(&pdev->dev, "controller appears to be disabled\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_warn(&pdev->dev, "unable to enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, "hpsa"); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); + return err; + } + + /* If the kernel supports MSI/MSI-X we will try to enable that, + * else we use the IO-APIC interrupt assigned to us by system ROM. + */ + hpsa_interrupt_mode(h, pdev, board_id); + + /* find the memory BAR */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) + break; + } + if (i == DEVICE_COUNT_RESOURCE) { + dev_warn(&pdev->dev, "no memory BAR found\n"); + err = -ENODEV; + goto err_out_free_res; + } + + h->paddr = pci_resource_start(pdev, i); /* addressing mode bits + * already removed + */ + + h->vaddr = remap_pci_mem(h->paddr, 0x250); + + /* Wait for the board to become ready. */ + for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) { + scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + if (scratchpad == HPSA_FIRMWARE_READY) + break; + msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); + } + if (scratchpad != HPSA_FIRMWARE_READY) { + dev_warn(&pdev->dev, "board not ready, timed out.\n"); + err = -ENODEV; + goto err_out_free_res; + } + + /* get the address index number */ + cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET); + cfg_base_addr &= (__u32) 0x0000ffff; + cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); + if (cfg_base_addr_index == -1) { + dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); + err = -ENODEV; + goto err_out_free_res; + } + + cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET); + h->cfgtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset, + sizeof(h->cfgtable)); + h->board_id = board_id; + + /* Query controller for max supported commands: */ + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + + h->product_name = products[prod_index].product_name; + h->access = *(products[prod_index].access); + /* Allow room for some ioctls */ + h->nr_cmds = h->max_commands - 4; + + if ((readb(&h->cfgtable->Signature[0]) != 'C') || + (readb(&h->cfgtable->Signature[1]) != 'I') || + (readb(&h->cfgtable->Signature[2]) != 'S') || + (readb(&h->cfgtable->Signature[3]) != 'S')) { + dev_warn(&pdev->dev, "not a valid CISS config table\n"); + err = -ENODEV; + goto err_out_free_res; + } +#ifdef CONFIG_X86 + { + /* Need to enable prefetch in the SCSI core for 6400 in x86 */ + __u32 prefetch; + prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); + prefetch |= 0x100; + writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); + } +#endif + + /* Disabling DMA prefetch for the P600 + * An ASIC bug may result in a prefetch beyond + * physical memory. + */ + if (board_id == 0x3225103C) { + __u32 dma_prefetch; + dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); + dma_prefetch |= 0x8000; + writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); + } + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) + */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + msleep(10); + } + +#ifdef HPSA_DEBUG + print_cfg_table(&pdev->dev, h->cfgtable); +#endif /* HPSA_DEBUG */ + + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&pdev->dev, "unable to get board into simple mode\n"); + err = -ENODEV; + goto err_out_free_res; + } + return 0; + +err_out_free_res: + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + return err; +} + +static int __devinit hpsa_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int i; + int dac; + struct ctlr_info *h; + + if (number_of_controllers == 0) + printk(KERN_INFO DRIVER_NAME "\n"); + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + msleep(HPSA_POST_RESET_PAUSE_MSECS); + + /* Now try to get the controller to respond to a no-op */ + for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { + if (hpsa_noop(pdev) == 0) + break; + else + dev_warn(&pdev->dev, "no-op failed%s\n", + (i < 11 ? "; re-trying" : "")); + } + } + + BUILD_BUG_ON(sizeof(struct CommandList) % 8); + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return -1; + + h->busy_initializing = 1; + INIT_HLIST_HEAD(&h->cmpQ); + INIT_HLIST_HEAD(&h->reqQ); + mutex_init(&h->busy_shutting_down); + init_completion(&h->scan_wait); + if (hpsa_pci_init(h, pdev) != 0) + goto clean1; + + sprintf(h->devname, "hpsa%d", number_of_controllers); + h->ctlr = number_of_controllers; + number_of_controllers++; + h->pdev = pdev; + + /* configure PCI DMA stuff */ + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) + dac = 1; + else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) + dac = 0; + else { + dev_err(&pdev->dev, "no suitable DMA available\n"); + goto clean1; + } + + /* make sure the board interrupts are off */ + h->access.set_intr_mask(h, HPSA_INTR_OFF); + if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr, + IRQF_DISABLED | IRQF_SHARED, h->devname, h)) { + dev_err(&pdev->dev, "unable to get irq %d for %s\n", + h->intr[SIMPLE_MODE_INT], h->devname); + goto clean2; + } + + dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", + h->devname, pdev->device, pci_name(pdev), + h->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + + h->cmd_pool_bits = + kmalloc(((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); + h->cmd_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->cmd_pool), + &(h->cmd_pool_dhandle)); + h->errinfo_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->errinfo_pool), + &(h->errinfo_pool_dhandle)); + if ((h->cmd_pool_bits == NULL) + || (h->cmd_pool == NULL) + || (h->errinfo_pool == NULL)) { + dev_err(&pdev->dev, "out of memory"); + goto clean4; + } + spin_lock_init(&h->lock); + + pci_set_drvdata(pdev, h); + memset(h->cmd_pool_bits, 0, + ((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long)); + + hpsa_scsi_setup(h); + + /* Turn the interrupts on so we can service requests */ + h->access.set_intr_mask(h, HPSA_INTR_ON); + + hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ + h->busy_initializing = 0; + return 1; + +clean4: + kfree(h->cmd_pool_bits); + if (h->cmd_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + if (h->errinfo_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, + h->errinfo_pool_dhandle); + free_irq(h->intr[SIMPLE_MODE_INT], h); +clean2: +clean1: + h->busy_initializing = 0; + kfree(h); + return -1; +} + +static void hpsa_flush_cache(struct ctlr_info *h) +{ + char *flush_buf; + struct CommandList *c; + + flush_buf = kzalloc(4, GFP_KERNEL); + if (!flush_buf) + return; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + goto out_of_memory; + } + fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); + if (c->err_info->CommandStatus != 0) + dev_warn(&h->pdev->dev, + "error flushing cache on controller\n"); + cmd_special_free(h, c); +out_of_memory: + kfree(flush_buf); +} + +static void hpsa_shutdown(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + h = pci_get_drvdata(pdev); + /* Turn board interrupts off and send the flush cache command + * sendcmd will turn off interrupt, and send the flush... + * To write all data in the battery backed cache to disks + */ + hpsa_flush_cache(h); + h->access.set_intr_mask(h, HPSA_INTR_OFF); + free_irq(h->intr[2], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ +} + +static void __devexit hpsa_remove_one(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + if (pci_get_drvdata(pdev) == NULL) { + dev_err(&pdev->dev, "unable to remove device \n"); + return; + } + h = pci_get_drvdata(pdev); + mutex_lock(&h->busy_shutting_down); + remove_from_scan_list(h); + hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ + hpsa_shutdown(pdev); + iounmap(h->vaddr); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, h->errinfo_pool_dhandle); + kfree(h->cmd_pool_bits); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + mutex_unlock(&h->busy_shutting_down); + kfree(h); +} + +static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, + __attribute__((unused)) pm_message_t state) +{ + return -ENOSYS; +} + +static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) +{ + return -ENOSYS; +} + +static struct pci_driver hpsa_pci_driver = { + .name = "hpsa", + .probe = hpsa_init_one, + .remove = __devexit_p(hpsa_remove_one), + .id_table = hpsa_pci_device_id, /* id_table */ + .shutdown = hpsa_shutdown, + .suspend = hpsa_suspend, + .resume = hpsa_resume, +}; + +/* + * This is it. Register the PCI driver information for the cards we control + * the OS will call our registered routines when it finds one of our cards. + */ +static int __init hpsa_init(void) +{ + int err; + /* Start the scan thread */ + hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan"); + if (IS_ERR(hpsa_scan_thread)) { + err = PTR_ERR(hpsa_scan_thread); + return -ENODEV; + } + err = pci_register_driver(&hpsa_pci_driver); + if (err) + kthread_stop(hpsa_scan_thread); + return err; +} + +static void __exit hpsa_cleanup(void) +{ + pci_unregister_driver(&hpsa_pci_driver); + kthread_stop(hpsa_scan_thread); +} + +module_init(hpsa_init); +module_exit(hpsa_cleanup); |
