diff options
Diffstat (limited to 'drivers/sbus/char/cd180.h')
| -rw-r--r-- | drivers/sbus/char/cd180.h | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/drivers/sbus/char/cd180.h b/drivers/sbus/char/cd180.h deleted file mode 100644 index 445b86cc65e7..000000000000 --- a/drivers/sbus/char/cd180.h +++ /dev/null @@ -1,240 +0,0 @@ - -/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ -#define CD180_NCH 8 /* Total number of channels */ -#define CD180_TPC 16 /* Ticks per character */ -#define CD180_NFIFO 8 /* TX FIFO size */ - -/* Global registers */ -#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ -#define CD180_SRCR 0x66 /* Service Request Configuration Register */ -#define CD180_PPRH 0x70 /* Prescaler Period Register High */ -#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ -#define CD180_MSMR 0x61 /* Modem Service Match Register */ -#define CD180_TSMR 0x62 /* Transmit Service Match Register */ -#define CD180_RSMR 0x63 /* Receive Service Match Register */ -#define CD180_GSVR 0x40 /* Global Service Vector Register */ -#define CD180_SRSR 0x65 /* Service Request Status Register */ -#define CD180_GSCR 0x41 /* Global Service Channel Register */ -#define CD180_CAR 0x64 /* Channel Access Register */ - -/* Indexed registers */ -#define CD180_RDCR 0x07 /* Receive Data Count Register */ -#define CD180_RDR 0x78 /* Receiver Data Register */ -#define CD180_RCSR 0x7a /* Receiver Character Status Register */ -#define CD180_TDR 0x7b /* Transmit Data Register */ -#define CD180_EOSRR 0x7f /* End of Service Request Register */ - -/* Channel Registers */ -#define CD180_SRER 0x02 /* Service Request Enable Register */ -#define CD180_CCR 0x01 /* Channel Command Register */ -#define CD180_COR1 0x03 /* Channel Option Register 1 */ -#define CD180_COR2 0x04 /* Channel Option Register 2 */ -#define CD180_COR3 0x05 /* Channel Option Register 3 */ -#define CD180_CCSR 0x06 /* Channel Control Status Register */ -#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ -#define CD180_RBPRH 0x31 /* Receive Bit Rate Period Register High */ -#define CD180_RBPRL 0x32 /* Receive Bit Rate Period Register Low */ -#define CD180_TBPRH 0x39 /* Transmit Bit Rate Period Register High */ -#define CD180_TBPRL 0x3a /* Transmit Bit Rate Period Register Low */ -#define CD180_SCHR1 0x09 /* Special Character Register 1 */ -#define CD180_SCHR2 0x0a /* Special Character Register 2 */ -#define CD180_SCHR3 0x0b /* Special Character Register 3 */ -#define CD180_SCHR4 0x0c /* Special Character Register 4 */ -#define CD180_MCR 0x12 /* Modem Change Register */ -#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ -#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ -#define CD180_MSVR 0x28 /* Modem Signal Value Register */ -#define CD180_MSVRTS 0x29 /* Modem Signal Value RTS */ -#define CD180_MSVDTR 0x2a /* Modem Signal Value DTR */ - -/* Global Interrupt Vector Register (R/W) */ - -#define GSVR_ITMASK 0x07 /* Interrupt type mask */ -#define GSVR_IT_MDM 0x01 /* Modem Signal Change Interrupt */ -#define GSVR_IT_TX 0x02 /* Transmit Data Interrupt */ -#define GSVR_IT_RGD 0x03 /* Receive Good Data Interrupt */ -#define GSVR_IT_REXC 0x07 /* Receive Exception Interrupt */ - - -/* Global Interrupt Channel Register (R/W) */ - -#define GSCR_CHAN 0x1c /* Channel Number Mask */ -#define GSCR_CHAN_OFF 2 /* Channel Number Offset */ - - -/* Channel Address Register (R/W) */ - -#define CAR_CHAN 0x07 /* Channel Number Mask */ - - -/* Receive Character Status Register (R/O) */ - -#define RCSR_TOUT 0x80 /* Rx Timeout */ -#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ -#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ -#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ -#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ -#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ -#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ -#define RCSR_BREAK 0x08 /* Break has been detected */ -#define RCSR_PE 0x04 /* Parity Error */ -#define RCSR_FE 0x02 /* Frame Error */ -#define RCSR_OE 0x01 /* Overrun Error */ - - -/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ - -#define CCR_HARDRESET 0x81 /* Reset the chip */ - -#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ - -#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ -#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ -#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ - -#define CCR_SSCH1 0x21 /* Send Special Character 1 */ - -#define CCR_SSCH2 0x22 /* Send Special Character 2 */ - -#define CCR_SSCH3 0x23 /* Send Special Character 3 */ - -#define CCR_SSCH4 0x24 /* Send Special Character 4 */ - -#define CCR_TXEN 0x18 /* Enable Transmitter */ -#define CCR_RXEN 0x12 /* Enable Receiver */ - -#define CCR_TXDIS 0x14 /* Disable Transmitter */ -#define CCR_RXDIS 0x11 /* Disable Receiver */ - - -/* Service Request Enable Register (R/W) */ - -#define SRER_DSR 0x80 /* Enable interrupt on DSR change */ -#define SRER_CD 0x40 /* Enable interrupt on CD change */ -#define SRER_CTS 0x20 /* Enable interrupt on CTS change */ -#define SRER_RXD 0x10 /* Enable interrupt on Receive Data */ -#define SRER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ -#define SRER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ -#define SRER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ -#define SRER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ - - -/* Channel Option Register 1 (R/W) */ - -#define COR1_ODDP 0x80 /* Odd Parity */ -#define COR1_PARMODE 0x60 /* Parity Mode mask */ -#define COR1_NOPAR 0x00 /* No Parity */ -#define COR1_FORCEPAR 0x20 /* Force Parity */ -#define COR1_NORMPAR 0x40 /* Normal Parity */ -#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ -#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ -#define COR1_1SB 0x00 /* 1 Stop Bit */ -#define COR1_15SB 0x04 /* 1.5 Stop Bits */ -#define COR1_2SB 0x08 /* 2 Stop Bits */ -#define COR1_CHARLEN 0x03 /* Character Length */ -#define COR1_5BITS 0x00 /* 5 bits */ -#define COR1_6BITS 0x01 /* 6 bits */ -#define COR1_7BITS 0x02 /* 7 bits */ -#define COR1_8BITS 0x03 /* 8 bits */ - - -/* Channel Option Register 2 (R/W) */ - -#define COR2_IXM 0x80 /* Implied XON mode */ -#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ -#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ -#define COR2_LLM 0x10 /* Local Loopback Mode */ -#define COR2_RLM 0x08 /* Remote Loopback Mode */ -#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ -#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ -#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ - - -/* Channel Option Register 3 (R/W) */ - -#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ -#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ -#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ -#define COR3_SCDE 0x10 /* Special Character Detection Enable */ -#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ - - -/* Channel Control Status Register (R/O) */ - -#define CCSR_RXEN 0x80 /* Receiver Enabled */ -#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ -#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ -#define CCSR_TXEN 0x08 /* Transmitter Enabled */ -#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ -#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ - - -/* Modem Change Option Register 1 (R/W) */ - -#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ -#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ -#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ -#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ -#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ - - -/* Modem Change Option Register 2 (R/W) */ - -#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ -#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ -#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ - - -/* Modem Change Register (R/W) */ - -#define MCR_DSRCHG 0x80 /* DSR Changed */ -#define MCR_CDCHG 0x40 /* CD Changed */ -#define MCR_CTSCHG 0x20 /* CTS Changed */ - - -/* Modem Signal Value Register (R/W) */ - -#define MSVR_DSR 0x80 /* Current state of DSR input */ -#define MSVR_CD 0x40 /* Current state of CD input */ -#define MSVR_CTS 0x20 /* Current state of CTS input */ -#define MSVR_DTR 0x02 /* Current state of DTR output */ -#define MSVR_RTS 0x01 /* Current state of RTS output */ - - -/* Service Request Status Register */ - -#define SRSR_CMASK 0xC0 /* Current Service Context Mask */ -#define SRSR_CNONE 0x00 /* Not in a service context */ -#define SRSR_CRX 0x40 /* Rx Context */ -#define SRSR_CTX 0x80 /* Tx Context */ -#define SRSR_CMDM 0xC0 /* Modem Context */ -#define SRSR_ANYINT 0x6F /* Any interrupt flag */ -#define SRSR_RINT 0x10 /* Receive Interrupt */ -#define SRSR_TINT 0x04 /* Transmit Interrupt */ -#define SRSR_MINT 0x01 /* Modem Interrupt */ -#define SRSR_REXT 0x20 /* Receive External Interrupt */ -#define SRSR_TEXT 0x08 /* Transmit External Interrupt */ -#define SRSR_MEXT 0x02 /* Modem External Interrupt */ - - -/* Service Request Configuration Register */ - -#define SRCR_PKGTYPE 0x80 -#define SRCR_REGACKEN 0x40 -#define SRCR_DAISYEN 0x20 -#define SRCR_GLOBPRI 0x10 -#define SRCR_UNFAIR 0x08 -#define SRCR_AUTOPRI 0x02 -#define SRCR_PRISEL 0x01 - -/* Values for register-based Interrupt ACKs */ -#define CD180_ACK_MINT 0x75 /* goes to MSMR */ -#define CD180_ACK_TINT 0x76 /* goes to TSMR */ -#define CD180_ACK_RINT 0x77 /* goes to RSMR */ - -/* Escape characters */ - -#define CD180_C_ESC 0x00 /* Escape character */ -#define CD180_C_SBRK 0x81 /* Start sending BREAK */ -#define CD180_C_DELAY 0x82 /* Delay output */ -#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ |
