diff options
Diffstat (limited to 'drivers/s390/block/dasd_eckd.c')
| -rw-r--r-- | drivers/s390/block/dasd_eckd.c | 170 |
1 files changed, 111 insertions, 59 deletions
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 417b97cd3f94..5819dc02a143 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -24,7 +24,6 @@ #include <asm/idals.h> #include <asm/ebcdic.h> #include <asm/io.h> -#include <asm/todclk.h> #include <asm/uaccess.h> #include <asm/cio.h> #include <asm/ccwdev.h> @@ -78,6 +77,11 @@ MODULE_DEVICE_TABLE(ccw, dasd_eckd_ids); static struct ccw_driver dasd_eckd_driver; /* see below */ +#define INIT_CQR_OK 0 +#define INIT_CQR_UNFORMATTED 1 +#define INIT_CQR_ERROR 2 + + /* initial attempt at a probe function. this can be simplified once * the other detection code is gone */ static int @@ -86,11 +90,12 @@ dasd_eckd_probe (struct ccw_device *cdev) int ret; /* set ECKD specific ccw-device options */ - ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE); + ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE | + CCWDEV_DO_PATHGROUP | CCWDEV_DO_MULTIPATH); if (ret) { - DBF_EVENT(DBF_WARNING, - "dasd_eckd_probe: could not set ccw-device options " - "for %s\n", dev_name(&cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s", + "dasd_eckd_probe: could not set " + "ccw-device options"); return ret; } ret = dasd_generic_probe(cdev, &dasd_eckd_discipline); @@ -749,8 +754,7 @@ static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device, cqr->block = NULL; cqr->expires = 10*HZ; cqr->lpm = lpm; - clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); - cqr->retries = 2; + cqr->retries = 256; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; return cqr; @@ -885,16 +889,15 @@ static int dasd_eckd_read_conf(struct dasd_device *device) rc = dasd_eckd_read_conf_lpm(device, &conf_data, &conf_len, lpm); if (rc && rc != -EOPNOTSUPP) { /* -EOPNOTSUPP is ok */ - DBF_EVENT(DBF_WARNING, + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "Read configuration data returned " - "error %d for device: %s", rc, - dev_name(&device->cdev->dev)); + "error %d", rc); return rc; } if (conf_data == NULL) { - DBF_EVENT(DBF_WARNING, "No configuration " - "data retrieved for device: %s", - dev_name(&device->cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", + "No configuration data " + "retrieved"); continue; /* no error */ } /* save first valid configuration data */ @@ -941,16 +944,14 @@ static int dasd_eckd_read_features(struct dasd_device *device) sizeof(struct dasd_rssd_features)), device); if (IS_ERR(cqr)) { - DBF_EVENT(DBF_WARNING, "Could not allocate initialization " - "request for device: %s", - dev_name(&device->cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not " + "allocate initialization request"); return PTR_ERR(cqr); } cqr->startdev = device; cqr->memdev = device; cqr->block = NULL; - clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); - cqr->retries = 5; + cqr->retries = 256; cqr->expires = 10 * HZ; /* Prepare for Read Subsystem Data */ @@ -1012,9 +1013,9 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, } psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data; psf_ssc_data->order = PSF_ORDER_SSC; - psf_ssc_data->suborder = 0x40; + psf_ssc_data->suborder = 0xc0; if (enable_pav) { - psf_ssc_data->suborder |= 0x88; + psf_ssc_data->suborder |= 0x08; psf_ssc_data->reserved[0] = 0x88; } ccw = cqr->cpaddr; @@ -1025,6 +1026,7 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, cqr->startdev = device; cqr->memdev = device; cqr->block = NULL; + cqr->retries = 256; cqr->expires = 10*HZ; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; @@ -1057,7 +1059,7 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) /* * Valide storage server of current device. */ -static int dasd_eckd_validate_server(struct dasd_device *device) +static void dasd_eckd_validate_server(struct dasd_device *device) { int rc; struct dasd_eckd_private *private; @@ -1068,15 +1070,12 @@ static int dasd_eckd_validate_server(struct dasd_device *device) else enable_pav = 1; rc = dasd_eckd_psf_ssc(device, enable_pav); + /* may be requested feature is not available on server, * therefore just report error and go ahead */ private = (struct dasd_eckd_private *) device->private; - DBF_EVENT(DBF_WARNING, "PSF-SSC on storage subsystem %s.%s.%04x " - "returned rc=%d for device: %s", - private->uid.vendor, private->uid.serial, - private->uid.ssid, rc, dev_name(&device->cdev->dev)); - /* RE-Read Configuration Data */ - return dasd_eckd_read_conf(device); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " + "returned rc=%d", private->uid.ssid, rc); } /* @@ -1090,6 +1089,15 @@ dasd_eckd_check_characteristics(struct dasd_device *device) struct dasd_block *block; int is_known, rc; + if (!ccw_device_is_pathgroup(device->cdev)) { + dev_warn(&device->cdev->dev, + "A channel path group could not be established\n"); + return -EIO; + } + if (!ccw_device_is_multipath(device->cdev)) { + dev_info(&device->cdev->dev, + "The DASD is not operating in multipath mode\n"); + } private = (struct dasd_eckd_private *) device->private; if (!private) { private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA); @@ -1123,9 +1131,9 @@ dasd_eckd_check_characteristics(struct dasd_device *device) if (private->uid.type == UA_BASE_DEVICE) { block = dasd_alloc_block(); if (IS_ERR(block)) { - DBF_EVENT(DBF_WARNING, "could not allocate dasd " - "block structure for device: %s", - dev_name(&device->cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", + "could not allocate dasd " + "block structure"); rc = PTR_ERR(block); goto out_err1; } @@ -1139,12 +1147,21 @@ dasd_eckd_check_characteristics(struct dasd_device *device) rc = is_known; goto out_err2; } + /* + * dasd_eckd_vaildate_server is done on the first device that + * is found for an LCU. All later other devices have to wait + * for it, so they will read the correct feature codes. + */ if (!is_known) { - /* new lcu found */ - rc = dasd_eckd_validate_server(device); /* will switch pav on */ - if (rc) - goto out_err3; - } + dasd_eckd_validate_server(device); + dasd_alias_lcu_setup_complete(device); + } else + dasd_alias_wait_for_lcu_setup(device); + + /* device may report different configuration data after LCU setup */ + rc = dasd_eckd_read_conf(device); + if (rc) + goto out_err3; /* Read Feature Codes */ dasd_eckd_read_features(device); @@ -1153,9 +1170,8 @@ dasd_eckd_check_characteristics(struct dasd_device *device) rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC, &private->rdc_data, 64); if (rc) { - DBF_EVENT(DBF_WARNING, - "Read device characteristics failed, rc=%d for " - "device: %s", rc, dev_name(&device->cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, + "Read device characteristic failed, rc=%d", rc); goto out_err3; } /* find the vaild cylinder size */ @@ -1256,12 +1272,29 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) cqr->block = NULL; cqr->startdev = device; cqr->memdev = device; - cqr->retries = 0; + cqr->retries = 255; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; return cqr; } +/* differentiate between 'no record found' and any other error */ +static int dasd_eckd_analysis_evaluation(struct dasd_ccw_req *init_cqr) +{ + char *sense; + if (init_cqr->status == DASD_CQR_DONE) + return INIT_CQR_OK; + else if (init_cqr->status == DASD_CQR_NEED_ERP || + init_cqr->status == DASD_CQR_FAILED) { + sense = dasd_get_sense(&init_cqr->irb); + if (sense && (sense[1] & SNS1_NO_REC_FOUND)) + return INIT_CQR_UNFORMATTED; + else + return INIT_CQR_ERROR; + } else + return INIT_CQR_ERROR; +} + /* * This is the callback function for the init_analysis cqr. It saves * the status of the initial analysis ccw before it frees it and kicks @@ -1269,21 +1302,20 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) * dasd_eckd_do_analysis again (if the devices has not been marked * for deletion in the meantime). */ -static void -dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data) +static void dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, + void *data) { struct dasd_eckd_private *private; struct dasd_device *device; device = init_cqr->startdev; private = (struct dasd_eckd_private *) device->private; - private->init_cqr_status = init_cqr->status; + private->init_cqr_status = dasd_eckd_analysis_evaluation(init_cqr); dasd_sfree_request(init_cqr, device); dasd_kick_device(device); } -static int -dasd_eckd_start_analysis(struct dasd_block *block) +static int dasd_eckd_start_analysis(struct dasd_block *block) { struct dasd_eckd_private *private; struct dasd_ccw_req *init_cqr; @@ -1295,27 +1327,44 @@ dasd_eckd_start_analysis(struct dasd_block *block) init_cqr->callback = dasd_eckd_analysis_callback; init_cqr->callback_data = NULL; init_cqr->expires = 5*HZ; + /* first try without ERP, so we can later handle unformatted + * devices as special case + */ + clear_bit(DASD_CQR_FLAGS_USE_ERP, &init_cqr->flags); + init_cqr->retries = 0; dasd_add_request_head(init_cqr); return -EAGAIN; } -static int -dasd_eckd_end_analysis(struct dasd_block *block) +static int dasd_eckd_end_analysis(struct dasd_block *block) { struct dasd_device *device; struct dasd_eckd_private *private; struct eckd_count *count_area; unsigned int sb, blk_per_trk; int status, i; + struct dasd_ccw_req *init_cqr; device = block->base; private = (struct dasd_eckd_private *) device->private; status = private->init_cqr_status; private->init_cqr_status = -1; - if (status != DASD_CQR_DONE) { - dev_warn(&device->cdev->dev, - "The DASD is not formatted\n"); + if (status == INIT_CQR_ERROR) { + /* try again, this time with full ERP */ + init_cqr = dasd_eckd_analysis_ccw(device); + dasd_sleep_on(init_cqr); + status = dasd_eckd_analysis_evaluation(init_cqr); + dasd_sfree_request(init_cqr, device); + } + + if (status == INIT_CQR_UNFORMATTED) { + dev_warn(&device->cdev->dev, "The DASD is not formatted\n"); return -EMEDIUMTYPE; + } else if (status == INIT_CQR_ERROR) { + dev_err(&device->cdev->dev, + "Detecting the DASD disk layout failed because " + "of an I/O error\n"); + return -EIO; } private->uses_cdl = 1; @@ -1607,8 +1656,7 @@ dasd_eckd_format_device(struct dasd_device * device, } fcp->startdev = device; fcp->memdev = device; - clear_bit(DASD_CQR_FLAGS_USE_ERP, &fcp->flags); - fcp->retries = 5; /* set retry counter to enable default ERP */ + fcp->retries = 256; fcp->buildclk = get_clock(); fcp->status = DASD_CQR_FILLED; return fcp; @@ -2690,6 +2738,7 @@ dasd_eckd_performance(struct dasd_device *device, void __user *argp) cqr->startdev = device; cqr->memdev = device; cqr->retries = 0; + clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); cqr->expires = 10 * HZ; /* Prepare for Read Subsystem Data */ @@ -3240,11 +3289,15 @@ int dasd_eckd_restore_device(struct dasd_device *device) if (is_known < 0) return is_known; if (!is_known) { - /* new lcu found */ - rc = dasd_eckd_validate_server(device); /* will switch pav on */ - if (rc) - goto out_err; - } + dasd_eckd_validate_server(device); + dasd_alias_lcu_setup_complete(device); + } else + dasd_alias_wait_for_lcu_setup(device); + + /* RE-Read Configuration Data */ + rc = dasd_eckd_read_conf(device); + if (rc) + goto out_err; /* Read Feature Codes */ dasd_eckd_read_features(device); @@ -3253,9 +3306,8 @@ int dasd_eckd_restore_device(struct dasd_device *device) rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC, &temp_rdc_data, 64); if (rc) { - DBF_EVENT(DBF_WARNING, - "Read device characteristics failed, rc=%d for " - "device: %s", rc, dev_name(&device->cdev->dev)); + DBF_EVENT_DEVID(DBF_WARNING, device->cdev, + "Read device characteristic failed, rc=%d", rc); goto out_err; } spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
