summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/Kconfig19
-rw-r--r--drivers/rtc/Makefile2
-rw-r--r--drivers/rtc/interface.c2
-rw-r--r--drivers/rtc/rtc-at91rm9200.c16
-rw-r--r--drivers/rtc/rtc-cmos.c294
-rw-r--r--drivers/rtc/rtc-dev.c58
-rw-r--r--drivers/rtc/rtc-ds1305.c847
-rw-r--r--drivers/rtc/rtc-m41t80.c20
-rw-r--r--drivers/rtc/rtc-m41t94.c173
-rw-r--r--drivers/rtc/rtc-omap.c21
-rw-r--r--drivers/rtc/rtc-pcf8583.c129
-rw-r--r--drivers/rtc/rtc-s3c.c89
-rw-r--r--drivers/rtc/rtc-vr41xx.c65
13 files changed, 1367 insertions, 368 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fc85bf2e4a97..90ab73825401 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -273,6 +273,25 @@ comment "SPI RTC drivers"
if SPI_MASTER
+config RTC_DRV_M41T94
+ tristate "ST M41T94"
+ help
+ If you say yes here you will get support for the
+ ST M41T94 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t94.
+
+config RTC_DRV_DS1305
+ tristate "Dallas/Maxim DS1305/DS1306"
+ help
+ Select this driver to get support for the Dallas/Maxim DS1305
+ and DS1306 real time clock chips. These support a trickle
+ charger, alarms, and NVRAM in addition to the clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1305.
+
config RTC_DRV_MAX6902
tristate "Maxim MAX6902"
help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b5d9d67df887..18622ef84cab 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o
+obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o
obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o
obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o
@@ -34,6 +35,7 @@ obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 58b7336640ff..d397fa5f3a91 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -345,7 +345,7 @@ struct rtc_device *rtc_class_open(char *name)
struct device *dev;
struct rtc_device *rtc = NULL;
- dev = class_find_device(rtc_class, name, __rtc_match);
+ dev = class_find_device(rtc_class, NULL, name, __rtc_match);
if (dev)
rtc = to_rtc_device(dev);
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 9c3db934cc24..cd32d05db773 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -171,8 +171,10 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
| BIN2BCD(tm.tm_mday) << 24
| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
- if (alrm->enabled)
+ if (alrm->enabled) {
+ at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
+ }
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
@@ -191,28 +193,22 @@ static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
pr_debug("%s(): cmd=%08x, arg=%08lx.\n", __func__, cmd, arg);
+ /* important: scrub old status before enabling IRQs */
switch (cmd) {
case RTC_AIE_OFF: /* alarm off */
at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
break;
case RTC_AIE_ON: /* alarm on */
+ at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
break;
case RTC_UIE_OFF: /* update off */
- case RTC_PIE_OFF: /* periodic off */
at91_sys_write(AT91_RTC_IDR, AT91_RTC_SECEV);
break;
case RTC_UIE_ON: /* update on */
- case RTC_PIE_ON: /* periodic on */
+ at91_sys_write(AT91_RTC_SCCR, AT91_RTC_SECEV);
at91_sys_write(AT91_RTC_IER, AT91_RTC_SECEV);
break;
- case RTC_IRQP_READ: /* read periodic alarm frequency */
- ret = put_user(AT91_RTC_FREQ, (unsigned long *) arg);
- break;
- case RTC_IRQP_SET: /* set periodic alarm frequency */
- if (arg != AT91_RTC_FREQ)
- ret = -EINVAL;
- break;
default:
ret = -ENOIOCTLCMD;
break;
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index d7bb9bac71df..6ea349aba3ba 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,25 +36,9 @@
#include <linux/platform_device.h>
#include <linux/mod_devicetable.h>
-#ifdef CONFIG_HPET_EMULATE_RTC
-#include <asm/hpet.h>
-#endif
-
/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
#include <asm-generic/rtc.h>
-#ifndef CONFIG_HPET_EMULATE_RTC
-#define is_hpet_enabled() 0
-#define hpet_set_alarm_time(hrs, min, sec) do { } while (0)
-#define hpet_set_periodic_freq(arg) 0
-#define hpet_mask_rtc_irq_bit(arg) do { } while (0)
-#define hpet_set_rtc_irq_bit(arg) do { } while (0)
-#define hpet_rtc_timer_init() do { } while (0)
-#define hpet_register_irq_handler(h) 0
-#define hpet_unregister_irq_handler(h) do { } while (0)
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
-#endif
-
struct cmos_rtc {
struct rtc_device *rtc;
struct device *dev;
@@ -93,6 +77,72 @@ static inline int is_intr(u8 rtc_intr)
/*----------------------------------------------------------------*/
+/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
+ * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
+ * used in a broken "legacy replacement" mode. The breakage includes
+ * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
+ * other (better) use.
+ *
+ * When that broken mode is in use, platform glue provides a partial
+ * emulation of hardware RTC IRQ facilities using HPET #1. We don't
+ * want to use HPET for anything except those IRQs though...
+ */
+#ifdef CONFIG_HPET_EMULATE_RTC
+#include <asm/hpet.h>
+#else
+
+static inline int is_hpet_enabled(void)
+{
+ return 0;
+}
+
+static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
+{
+ return 0;
+}
+
+static inline int hpet_set_rtc_irq_bit(unsigned long mask)
+{
+ return 0;
+}
+
+static inline int
+hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+ return 0;
+}
+
+static inline int hpet_set_periodic_freq(unsigned long freq)
+{
+ return 0;
+}
+
+static inline int hpet_rtc_dropped_irq(void)
+{
+ return 0;
+}
+
+static inline int hpet_rtc_timer_init(void)
+{
+ return 0;
+}
+
+extern irq_handler_t hpet_rtc_interrupt;
+
+static inline int hpet_register_irq_handler(irq_handler_t handler)
+{
+ return 0;
+}
+
+static inline int hpet_unregister_irq_handler(irq_handler_t handler)
+{
+ return 0;
+}
+
+#endif
+
+/*----------------------------------------------------------------*/
+
static int cmos_read_time(struct device *dev, struct rtc_time *t)
{
/* REVISIT: if the clock has a "century" register, use
@@ -185,11 +235,56 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0;
}
+static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
+{
+ unsigned char rtc_intr;
+
+ /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+ * allegedly some older rtcs need that to handle irqs properly
+ */
+ rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+
+ if (is_hpet_enabled())
+ return;
+
+ rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(rtc_intr))
+ rtc_update_irq(cmos->rtc, 1, rtc_intr);
+}
+
+static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
+{
+ unsigned char rtc_control;
+
+ /* flush any pending IRQ status, notably for update irqs,
+ * before we enable new IRQs
+ */
+ rtc_control = CMOS_READ(RTC_CONTROL);
+ cmos_checkintr(cmos, rtc_control);
+
+ rtc_control |= mask;
+ CMOS_WRITE(rtc_control, RTC_CONTROL);
+ hpet_set_rtc_irq_bit(mask);
+
+ cmos_checkintr(cmos, rtc_control);
+}
+
+static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
+{
+ unsigned char rtc_control;
+
+ rtc_control = CMOS_READ(RTC_CONTROL);
+ rtc_control &= ~mask;
+ CMOS_WRITE(rtc_control, RTC_CONTROL);
+ hpet_mask_rtc_irq_bit(mask);
+
+ cmos_checkintr(cmos, rtc_control);
+}
+
static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
unsigned char mon, mday, hrs, min, sec;
- unsigned char rtc_control, rtc_intr;
if (!is_valid_irq(cmos->irq))
return -EIO;
@@ -213,17 +308,10 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
sec = t->time.tm_sec;
sec = (sec < 60) ? BIN2BCD(sec) : 0xff;
- hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
spin_lock_irq(&rtc_lock);
/* next rtc irq must not be from previous alarm setting */
- rtc_control = CMOS_READ(RTC_CONTROL);
- rtc_control &= ~RTC_AIE;
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(rtc_intr))
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
+ cmos_irq_disable(cmos, RTC_AIE);
/* update alarm */
CMOS_WRITE(hrs, RTC_HOURS_ALARM);
@@ -237,14 +325,13 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
CMOS_WRITE(mon, cmos->mon_alrm);
}
- if (t->enabled) {
- rtc_control |= RTC_AIE;
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(rtc_intr))
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
- }
+ /* FIXME the HPET alarm glue currently ignores day_alrm
+ * and mon_alrm ...
+ */
+ hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
+
+ if (t->enabled)
+ cmos_irq_enable(cmos, RTC_AIE);
spin_unlock_irq(&rtc_lock);
@@ -267,8 +354,8 @@ static int cmos_irq_set_freq(struct device *dev, int freq)
f = 16 - f;
spin_lock_irqsave(&rtc_lock, flags);
- if (!hpet_set_periodic_freq(freq))
- CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT);
+ hpet_set_periodic_freq(freq);
+ CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
@@ -277,26 +364,17 @@ static int cmos_irq_set_freq(struct device *dev, int freq)
static int cmos_irq_set_state(struct device *dev, int enabled)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char rtc_control, rtc_intr;
unsigned long flags;
if (!is_valid_irq(cmos->irq))
return -ENXIO;
spin_lock_irqsave(&rtc_lock, flags);
- rtc_control = CMOS_READ(RTC_CONTROL);
if (enabled)
- rtc_control |= RTC_PIE;
+ cmos_irq_enable(cmos, RTC_PIE);
else
- rtc_control &= ~RTC_PIE;
-
- CMOS_WRITE(rtc_control, RTC_CONTROL);
-
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(rtc_intr))
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
+ cmos_irq_disable(cmos, RTC_PIE);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
@@ -308,7 +386,6 @@ static int
cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char rtc_control, rtc_intr;
unsigned long flags;
switch (cmd) {
@@ -316,51 +393,29 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
case RTC_AIE_ON:
case RTC_UIE_OFF:
case RTC_UIE_ON:
- case RTC_PIE_OFF:
- case RTC_PIE_ON:
if (!is_valid_irq(cmos->irq))
return -EINVAL;
break;
+ /* PIE ON/OFF is handled by cmos_irq_set_state() */
default:
return -ENOIOCTLCMD;
}
spin_lock_irqsave(&rtc_lock, flags);
- rtc_control = CMOS_READ(RTC_CONTROL);
switch (cmd) {
case RTC_AIE_OFF: /* alarm off */
- rtc_control &= ~RTC_AIE;
- hpet_mask_rtc_irq_bit(RTC_AIE);
+ cmos_irq_disable(cmos, RTC_AIE);
break;
case RTC_AIE_ON: /* alarm on */
- rtc_control |= RTC_AIE;
- hpet_set_rtc_irq_bit(RTC_AIE);
+ cmos_irq_enable(cmos, RTC_AIE);
break;
case RTC_UIE_OFF: /* update off */
- rtc_control &= ~RTC_UIE;
- hpet_mask_rtc_irq_bit(RTC_UIE);
+ cmos_irq_disable(cmos, RTC_UIE);
break;
case RTC_UIE_ON: /* update on */
- rtc_control |= RTC_UIE;
- hpet_set_rtc_irq_bit(RTC_UIE);
- break;
- case RTC_PIE_OFF: /* periodic off */
- rtc_control &= ~RTC_PIE;
- hpet_mask_rtc_irq_bit(RTC_PIE);
- break;
- case RTC_PIE_ON: /* periodic on */
- rtc_control |= RTC_PIE;
- hpet_set_rtc_irq_bit(RTC_PIE);
+ cmos_irq_enable(cmos, RTC_UIE);
break;
}
- if (!is_hpet_enabled())
- CMOS_WRITE(rtc_control, RTC_CONTROL);
-
- rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(rtc_intr))
- rtc_update_irq(cmos->rtc, 1, rtc_intr);
-
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
@@ -502,27 +557,29 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
u8 rtc_control;
spin_lock(&rtc_lock);
- /*
- * In this case it is HPET RTC interrupt handler
- * calling us, with the interrupt information
- * passed as arg1, instead of irq.
+
+ /* When the HPET interrupt handler calls us, the interrupt
+ * status is passed as arg1 instead of the irq number. But
+ * always clear irq status, even when HPET is in the way.
+ *
+ * Note that HPET and RTC are almost certainly out of phase,
+ * giving different IRQ status ...
*/
+ irqstat = CMOS_READ(RTC_INTR_FLAGS);
+ rtc_control = CMOS_READ(RTC_CONTROL);
if (is_hpet_enabled())
irqstat = (unsigned long)irq & 0xF0;
- else {
- irqstat = CMOS_READ(RTC_INTR_FLAGS);
- rtc_control = CMOS_READ(RTC_CONTROL);
- irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
- }
+ irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
/* All Linux RTC alarms should be treated as if they were oneshot.
* Similar code may be needed in system wakeup paths, in case the
* alarm woke the system.
*/
if (irqstat & RTC_AIE) {
- rtc_control = CMOS_READ(RTC_CONTROL);
rtc_control &= ~RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
+ hpet_mask_rtc_irq_bit(RTC_AIE);
+
CMOS_READ(RTC_INTR_FLAGS);
}
spin_unlock(&rtc_lock);
@@ -629,18 +686,13 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
* do something about other clock frequencies.
*/
cmos_rtc.rtc->irq_freq = 1024;
- if (!hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq))
- CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
+ hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
+ CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
+
+ /* disable irqs */
+ cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
- /* disable irqs.
- *
- * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
- * allegedly some older rtcs need that to handle irqs properly
- */
rtc_control = CMOS_READ(RTC_CONTROL);
- rtc_control &= ~(RTC_PIE | RTC_AIE | RTC_UIE);
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- CMOS_READ(RTC_INTR_FLAGS);
spin_unlock_irq(&rtc_lock);
@@ -687,7 +739,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
goto cleanup2;
}
- pr_info("%s: alarms up to one %s%s\n",
+ pr_info("%s: alarms up to one %s%s%s\n",
cmos_rtc.rtc->dev.bus_id,
is_valid_irq(rtc_irq)
? (cmos_rtc.mon_alrm
@@ -695,8 +747,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
: (cmos_rtc.day_alrm
? "month" : "day"))
: "no",
- cmos_rtc.century ? ", y3k" : ""
- );
+ cmos_rtc.century ? ", y3k" : "",
+ is_hpet_enabled() ? ", hpet irqs" : "");
return 0;
@@ -713,13 +765,8 @@ cleanup0:
static void cmos_do_shutdown(void)
{
- unsigned char rtc_control;
-
spin_lock_irq(&rtc_lock);
- rtc_control = CMOS_READ(RTC_CONTROL);
- rtc_control &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
- CMOS_WRITE(rtc_control, RTC_CONTROL);
- CMOS_READ(RTC_INTR_FLAGS);
+ cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
spin_unlock_irq(&rtc_lock);
}
@@ -760,17 +807,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
spin_lock_irq(&rtc_lock);
cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
- unsigned char irqstat;
+ unsigned char mask;
if (do_wake)
- tmp &= ~(RTC_PIE|RTC_UIE);
+ mask = RTC_IRQMASK & ~RTC_AIE;
else
- tmp &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
+ mask = RTC_IRQMASK;
+ tmp &= ~mask;
CMOS_WRITE(tmp, RTC_CONTROL);
- irqstat = CMOS_READ(RTC_INTR_FLAGS);
- irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(irqstat))
- rtc_update_irq(cmos->rtc, 1, irqstat);
+ hpet_mask_rtc_irq_bit(mask);
+
+ cmos_checkintr(cmos, tmp);
}
spin_unlock_irq(&rtc_lock);
@@ -796,7 +843,8 @@ static int cmos_resume(struct device *dev)
unsigned char tmp = cmos->suspend_ctrl;
/* re-enable any irqs previously active */
- if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
+ if (tmp & RTC_IRQMASK) {
+ unsigned char mask;
if (cmos->enabled_wake) {
if (cmos->wake_off)
@@ -807,18 +855,28 @@ static int cmos_resume(struct device *dev)
}
spin_lock_irq(&rtc_lock);
- CMOS_WRITE(tmp, RTC_CONTROL);
- tmp = CMOS_READ(RTC_INTR_FLAGS);
- tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
- if (is_intr(tmp))
- rtc_update_irq(cmos->rtc, 1, tmp);
+ do {
+ CMOS_WRITE(tmp, RTC_CONTROL);
+ hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
+
+ mask = CMOS_READ(RTC_INTR_FLAGS);
+ mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+ if (!is_hpet_enabled() || !is_intr(mask))
+ break;
+
+ /* force one-shot behavior if HPET blocked
+ * the wake alarm's irq
+ */
+ rtc_update_irq(cmos->rtc, 1, mask);
+ tmp &= ~RTC_AIE;
+ hpet_mask_rtc_irq_bit(RTC_AIE);
+ } while (mask & RTC_AIE);
spin_unlock_irq(&rtc_lock);
}
pr_debug("%s: resume, ctrl %02x\n",
cmos_rtc.rtc->dev.bus_id,
- cmos->suspend_ctrl);
-
+ tmp);
return 0;
}
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0114a78b7cbb..0a870b7e5c32 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -209,7 +209,7 @@ static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
return (data != 0) ? (POLLIN | POLLRDNORM) : 0;
}
-static int rtc_dev_ioctl(struct inode *inode, struct file *file,
+static long rtc_dev_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
int err = 0;
@@ -219,6 +219,10 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
struct rtc_wkalrm alarm;
void __user *uarg = (void __user *) arg;
+ err = mutex_lock_interruptible(&rtc->ops_lock);
+ if (err)
+ return -EBUSY;
+
/* check that the calling task has appropriate permissions
* for certain ioctls. doing this check here is useful
* to avoid duplicate code in each driver.
@@ -227,26 +231,31 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
case RTC_EPOCH_SET:
case RTC_SET_TIME:
if (!capable(CAP_SYS_TIME))
- return -EACCES;
+ err = -EACCES;
break;
case RTC_IRQP_SET:
if (arg > rtc->max_user_freq && !capable(CAP_SYS_RESOURCE))
- return -EACCES;
+ err = -EACCES;
break;
case RTC_PIE_ON:
if (rtc->irq_freq > rtc->max_user_freq &&
!capable(CAP_SYS_RESOURCE))
- return -EACCES;
+ err = -EACCES;
break;
}
+ if (err)
+ goto done;
+
/* try the driver's ioctl interface */
if (ops->ioctl) {
err = ops->ioctl(rtc->dev.parent, cmd, arg);
- if (err != -ENOIOCTLCMD)
+ if (err != -ENOIOCTLCMD) {
+ mutex_unlock(&rtc->ops_lock);
return err;
+ }
}
/* if the driver does not provide the ioctl interface
@@ -265,15 +274,19 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
switch (cmd) {
case RTC_ALM_READ:
+ mutex_unlock(&rtc->ops_lock);
+
err = rtc_read_alarm(rtc, &alarm);
if (err < 0)
return err;
if (copy_to_user(uarg, &alarm.time, sizeof(tm)))
- return -EFAULT;
- break;
+ err = -EFAULT;
+ return err;
case RTC_ALM_SET:
+ mutex_unlock(&rtc->ops_lock);
+
if (copy_from_user(&alarm.time, uarg, sizeof(tm)))
return -EFAULT;
@@ -321,24 +334,26 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
}
}
- err = rtc_set_alarm(rtc, &alarm);
- break;
+ return rtc_set_alarm(rtc, &alarm);
case RTC_RD_TIME:
+ mutex_unlock(&rtc->ops_lock);
+
err = rtc_read_time(rtc, &tm);
if (err < 0)
return err;
if (copy_to_user(uarg, &tm, sizeof(tm)))
- return -EFAULT;
- break;
+ err = -EFAULT;
+ return err;
case RTC_SET_TIME:
+ mutex_unlock(&rtc->ops_lock);
+
if (copy_from_user(&tm, uarg, sizeof(tm)))
return -EFAULT;
- err = rtc_set_time(rtc, &tm);
- break;
+ return rtc_set_time(rtc, &tm);
case RTC_PIE_ON:
err = rtc_irq_set_state(rtc, NULL, 1);
@@ -376,34 +391,37 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
break;
#endif
case RTC_WKALM_SET:
+ mutex_unlock(&rtc->ops_lock);
if (copy_from_user(&alarm, uarg, sizeof(alarm)))
return -EFAULT;
- err = rtc_set_alarm(rtc, &alarm);
- break;
+ return rtc_set_alarm(rtc, &alarm);
case RTC_WKALM_RD:
+ mutex_unlock(&rtc->ops_lock);
err = rtc_read_alarm(rtc, &alarm);
if (err < 0)
return err;
if (copy_to_user(uarg, &alarm, sizeof(alarm)))
- return -EFAULT;
- break;
+ err = -EFAULT;
+ return err;
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
case RTC_UIE_OFF:
clear_uie(rtc);
- return 0;
+ break;
case RTC_UIE_ON:
- return set_uie(rtc);
+ err = set_uie(rtc);
#endif
default:
err = -ENOTTY;
break;
}
+done:
+ mutex_unlock(&rtc->ops_lock);
return err;
}
@@ -432,7 +450,7 @@ static const struct file_operations rtc_dev_fops = {
.llseek = no_llseek,
.read = rtc_dev_read,
.poll = rtc_dev_poll,
- .ioctl = rtc_dev_ioctl,
+ .unlocked_ioctl = rtc_dev_ioctl,
.open = rtc_dev_open,
.release = rtc_dev_release,
.fasync = rtc_dev_fasync,
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
new file mode 100644
index 000000000000..b91d02a3ace9
--- /dev/null
+++ b/drivers/rtc/rtc-ds1305.c
@@ -0,0 +1,847 @@
+/*
+ * rtc-ds1305.c -- driver for DS1305 and DS1306 SPI RTC chips
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+
+
+/*
+ * Registers ... mask DS1305_WRITE into register address to write,
+ * otherwise you're reading it. All non-bitmask values are BCD.
+ */
+#define DS1305_WRITE 0x80
+
+
+/* RTC date/time ... the main special cases are that we:
+ * - Need fancy "hours" encoding in 12hour mode
+ * - Don't rely on the "day-of-week" field (or tm_wday)
+ * - Are a 21st-century clock (2000 <= year < 2100)
+ */
+#define DS1305_RTC_LEN 7 /* bytes for RTC regs */
+
+#define DS1305_SEC 0x00 /* register addresses */
+#define DS1305_MIN 0x01
+#define DS1305_HOUR 0x02
+# define DS1305_HR_12 0x40 /* set == 12 hr mode */
+# define DS1305_HR_PM 0x20 /* set == PM (12hr mode) */
+#define DS1305_WDAY 0x03
+#define DS1305_MDAY 0x04
+#define DS1305_MON 0x05
+#define DS1305_YEAR 0x06
+
+
+/* The two alarms have only sec/min/hour/wday fields (ALM_LEN).
+ * DS1305_ALM_DISABLE disables a match field (some combos are bad).
+ *
+ * NOTE that since we don't use WDAY, we limit ourselves to alarms
+ * only one day into the future (vs potentially up to a week).
+ *
+ * NOTE ALSO that while we could generate once-a-second IRQs (UIE), we
+ * don't currently support them. We'd either need to do it only when
+ * no alarm is pending (not the standard model), or to use the second
+ * alarm (implying that this is a DS1305 not DS1306, *and* that either
+ * it's wired up a second IRQ we know, or that INTCN is set)
+ */
+#define DS1305_ALM_LEN 4 /* bytes for ALM regs */
+#define DS1305_ALM_DISABLE 0x80
+
+#define DS1305_ALM0(r) (0x07 + (r)) /* register addresses */
+#define DS1305_ALM1(r) (0x0b + (r))
+
+
+/* three control registers */
+#define DS1305_CONTROL_LEN 3 /* bytes of control regs */
+
+#define DS1305_CONTROL 0x0f /* register addresses */
+# define DS1305_nEOSC 0x80 /* low enables oscillator */
+# define DS1305_WP 0x40 /* write protect */
+# define DS1305_INTCN 0x04 /* clear == only int0 used */
+# define DS1306_1HZ 0x04 /* enable 1Hz output */
+# define DS1305_AEI1 0x02 /* enable ALM1 IRQ */
+# define DS1305_AEI0 0x01 /* enable ALM0 IRQ */
+#define DS1305_STATUS 0x10
+/* status has just AEIx bits, mirrored as IRQFx */
+#define DS1305_TRICKLE 0x11
+/* trickle bits are defined in <linux/spi/ds1305.h> */
+
+/* a bunch of NVRAM */
+#define DS1305_NVRAM_LEN 96 /* bytes of NVRAM */
+
+#define DS1305_NVRAM 0x20 /* register addresses */
+
+
+struct ds1305 {
+ struct spi_device *spi;
+ struct rtc_device *rtc;
+
+ struct work_struct work;
+
+ unsigned long flags;
+#define FLAG_EXITING 0
+
+ bool hr12;
+ u8 ctrl[DS1305_CONTROL_LEN];
+};
+
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Utilities ... tolerate 12-hour AM/PM notation in case of non-Linux
+ * software (like a bootloader) which may require it.
+ */
+
+static unsigned bcd2hour(u8 bcd)
+{
+ if (bcd & DS1305_HR_12) {
+ unsigned hour = 0;
+
+ bcd &= ~DS1305_HR_12;
+ if (bcd & DS1305_HR_PM) {
+ hour = 12;
+ bcd &= ~DS1305_HR_PM;
+ }
+ hour += BCD2BIN(bcd);
+ return hour - 1;
+ }
+ return BCD2BIN(bcd);
+}
+
+static u8 hour2bcd(bool hr12, int hour)
+{
+ if (hr12) {
+ hour++;
+ if (hour <= 12)
+ return DS1305_HR_12 | BIN2BCD(hour);
+ hour -= 12;
+ return DS1305_HR_12 | DS1305_HR_PM | BIN2BCD(hour);
+ }
+ return BIN2BCD(hour);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to RTC framework
+ */
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ u8 buf[2];
+ int status = -ENOIOCTLCMD;
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+
+ switch (cmd) {
+ case RTC_AIE_OFF:
+ status = 0;
+ if (!(buf[1] & DS1305_AEI0))
+ goto done;
+ buf[1] &= ~DS1305_AEI0;
+ break;
+
+ case RTC_AIE_ON:
+ status = 0;
+ if (ds1305->ctrl[0] & DS1305_AEI0)
+ goto done;
+ buf[1] |= DS1305_AEI0;
+ break;
+ }
+ if (status == 0) {
+ status = spi_write_then_read(ds1305->spi, buf, sizeof buf,
+ NULL, 0);
+ if (status >= 0)
+ ds1305->ctrl[0] = buf[1];
+ }
+
+done:
+ return status;
+}
+
+#else
+#define ds1305_ioctl NULL
+#endif
+
+/*
+ * Get/set of date and time is pretty normal.
+ */
+
+static int ds1305_get_time(struct device *dev, struct rtc_time *time)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ u8 addr = DS1305_SEC;
+ u8 buf[DS1305_RTC_LEN];
+ int status;
+
+ /* Use write-then-read to get all the date/time registers
+ * since dma from stack is nonportable
+ */
+ status = spi_write_then_read(ds1305->spi, &addr, sizeof addr,
+ buf, sizeof buf);
+ if (status < 0)
+ return status;
+
+ dev_vdbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
+ "read", buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6]);
+
+ /* Decode the registers */
+ time->tm_sec = BCD2BIN(buf[DS1305_SEC]);
+ time->tm_min = BCD2BIN(buf[DS1305_MIN]);
+ time->tm_hour = bcd2hour(buf[DS1305_HOUR]);
+ time->tm_wday = buf[DS1305_WDAY] - 1;
+ time->tm_mday = BCD2BIN(buf[DS1305_MDAY]);
+ time->tm_mon = BCD2BIN(buf[DS1305_MON]) - 1;
+ time->tm_year = BCD2BIN(buf[DS1305_YEAR]) + 100;
+
+ dev_vdbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", time->tm_sec, time->tm_min,
+ time->tm_hour, time->tm_mday,
+ time->tm_mon, time->tm_year, time->tm_wday);
+
+ /* Time may not be set */
+ return rtc_valid_tm(time);
+}
+
+static int ds1305_set_time(struct device *dev, struct rtc_time *time)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ u8 buf[1 + DS1305_RTC_LEN];
+ u8 *bp = buf;
+
+ dev_vdbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", time->tm_sec, time->tm_min,
+ time->tm_hour, time->tm_mday,
+ time->tm_mon, time->tm_year, time->tm_wday);
+
+ /* Write registers starting at the first time/date address. */
+ *bp++ = DS1305_WRITE | DS1305_SEC;
+
+ *bp++ = BIN2BCD(time->tm_sec);
+ *bp++ = BIN2BCD(time->tm_min);
+ *bp++ = hour2bcd(ds1305->hr12, time->tm_hour);
+ *bp++ = (time->tm_wday < 7) ? (time->tm_wday + 1) : 1;
+ *bp++ = BIN2BCD(time->tm_mday);
+ *bp++ = BIN2BCD(time->tm_mon + 1);
+ *bp++ = BIN2BCD(time->tm_year - 100);
+
+ dev_dbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
+ "write", buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ /* use write-then-read since dma from stack is nonportable */
+ return spi_write_then_read(ds1305->spi, buf, sizeof buf,
+ NULL, 0);
+}
+
+/*
+ * Get/set of alarm is a bit funky:
+ *
+ * - First there's the inherent raciness of getting the (partitioned)
+ * status of an alarm that could trigger while we're reading parts
+ * of that status.
+ *
+ * - Second there's its limited range (we could increase it a bit by
+ * relying on WDAY), which means it will easily roll over.
+ *
+ * - Third there's the choice of two alarms and alarm signals.
+ * Here we use ALM0 and expect that nINT0 (open drain) is used;
+ * that's the only real option for DS1306 runtime alarms, and is
+ * natural on DS1305.
+ *
+ * - Fourth, there's also ALM1, and a second interrupt signal:
+ * + On DS1305 ALM1 uses nINT1 (when INTCN=1) else nINT0;
+ * + On DS1306 ALM1 only uses INT1 (an active high pulse)
+ * and it won't work when VCC1 is active.
+ *
+ * So to be most general, we should probably set both alarms to the
+ * same value, letting ALM1 be the wakeup event source on DS1306
+ * and handling several wiring options on DS1305.
+ *
+ * - Fifth, we support the polled mode (as well as possible; why not?)
+ * even when no interrupt line is wired to an IRQ.
+ */
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ struct spi_device *spi = ds1305->spi;
+ u8 addr;
+ int status;
+ u8 buf[DS1305_ALM_LEN];
+
+ /* Refresh control register cache BEFORE reading ALM0 registers,
+ * since reading alarm registers acks any pending IRQ. That
+ * makes returning "pending" status a bit of a lie, but that bit
+ * of EFI status is at best fragile anyway (given IRQ handlers).
+ */
+ addr = DS1305_CONTROL;
+ status = spi_write_then_read(spi, &addr, sizeof addr,
+ ds1305->ctrl, sizeof ds1305->ctrl);
+ if (status < 0)
+ return status;
+
+ alm->enabled = !!(ds1305->ctrl[0] & DS1305_AEI0);
+ alm->pending = !!(ds1305->ctrl[1] & DS1305_AEI0);
+
+ /* get and check ALM0 registers */
+ addr = DS1305_ALM0(DS1305_SEC);
+ status = spi_write_then_read(spi, &addr, sizeof addr,
+ buf, sizeof buf);
+ if (status < 0)
+ return status;
+
+ dev_vdbg(dev, "%s: %02x %02x %02x %02x\n",
+ "alm0 read", buf[DS1305_SEC], buf[DS1305_MIN],
+ buf[DS1305_HOUR], buf[DS1305_WDAY]);
+
+ if ((DS1305_ALM_DISABLE & buf[DS1305_SEC])
+ || (DS1305_ALM_DISABLE & buf[DS1305_MIN])
+ || (DS1305_ALM_DISABLE & buf[DS1305_HOUR]))
+ return -EIO;
+
+ /* Stuff these values into alm->time and let RTC framework code
+ * fill in the rest ... and also handle rollover to tomorrow when
+ * that's needed.
+ */
+ alm->time.tm_sec = BCD2BIN(buf[DS1305_SEC]);
+ alm->time.tm_min = BCD2BIN(buf[DS1305_MIN]);
+ alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
+ alm->time.tm_mday = -1;
+ alm->time.tm_mon = -1;
+ alm->time.tm_year = -1;
+ /* next three fields are unused by Linux */
+ alm->time.tm_wday = -1;
+ alm->time.tm_mday = -1;
+ alm->time.tm_isdst = -1;
+
+ return 0;
+}
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ struct spi_device *spi = ds1305->spi;
+ unsigned long now, later;
+ struct rtc_time tm;
+ int status;
+ u8 buf[1 + DS1305_ALM_LEN];
+
+ /* convert desired alarm to time_t */
+ status = rtc_tm_to_time(&alm->time, &later);
+ if (status < 0)
+ return status;
+
+ /* Read current time as time_t */
+ status = ds1305_get_time(dev, &tm);
+ if (status < 0)
+ return status;
+ status = rtc_tm_to_time(&tm, &now);
+ if (status < 0)
+ return status;
+
+ /* make sure alarm fires within the next 24 hours */
+ if (later <= now)
+ return -EINVAL;
+ if ((later - now) > 24 * 60 * 60)
+ return -EDOM;
+
+ /* disable alarm if needed */
+ if (ds1305->ctrl[0] & DS1305_AEI0) {
+ ds1305->ctrl[0] &= ~DS1305_AEI0;
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+ status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+ if (status < 0)
+ return status;
+ }
+
+ /* write alarm */
+ buf[0] = DS1305_WRITE | DS1305_ALM0(DS1305_SEC);
+ buf[1 + DS1305_SEC] = BIN2BCD(alm->time.tm_sec);
+ buf[1 + DS1305_MIN] = BIN2BCD(alm->time.tm_min);
+ buf[1 + DS1305_HOUR] = hour2bcd(ds1305->hr12, alm->time.tm_hour);
+ buf[1 + DS1305_WDAY] = DS1305_ALM_DISABLE;
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x\n",
+ "alm0 write", buf[1 + DS1305_SEC], buf[1 + DS1305_MIN],
+ buf[1 + DS1305_HOUR], buf[1 + DS1305_WDAY]);
+
+ status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+ if (status < 0)
+ return status;
+
+ /* enable alarm if requested */
+ if (alm->enabled) {
+ ds1305->ctrl[0] |= DS1305_AEI0;
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+ status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+ }
+
+ return status;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int ds1305_proc(struct device *dev, struct seq_file *seq)
+{
+ struct ds1305 *ds1305 = dev_get_drvdata(dev);
+ char *diodes = "no";
+ char *resistors = "";
+
+ /* ctrl[2] is treated as read-only; no locking needed */
+ if ((ds1305->ctrl[2] & 0xf0) == DS1305_TRICKLE_MAGIC) {
+ switch (ds1305->ctrl[2] & 0x0c) {
+ case DS1305_TRICKLE_DS2:
+ diodes = "2 diodes, ";
+ break;
+ case DS1305_TRICKLE_DS1:
+ diodes = "1 diode, ";
+ break;
+ default:
+ goto done;
+ }
+ switch (ds1305->ctrl[2] & 0x03) {
+ case DS1305_TRICKLE_2K:
+ resistors = "2k Ohm";
+ break;
+ case DS1305_TRICKLE_4K:
+ resistors = "4k Ohm";
+ break;
+ case DS1305_TRICKLE_8K:
+ resistors = "8k Ohm";
+ break;
+ default:
+ diodes = "no";
+ break;
+ }
+ }
+
+done:
+ return seq_printf(seq,
+ "trickle_charge\t: %s%s\n",
+ diodes, resistors);
+}
+
+#else
+#define ds1305_proc NULL
+#endif
+
+static const struct rtc_class_ops ds1305_ops = {
+ .ioctl = ds1305_ioctl,
+ .read_time = ds1305_get_time,
+ .set_time = ds1305_set_time,
+ .read_alarm = ds1305_get_alarm,
+ .set_alarm = ds1305_set_alarm,
+ .proc = ds1305_proc,
+};
+
+static void ds1305_work(struct work_struct *work)
+{
+ struct ds1305 *ds1305 = container_of(work, struct ds1305, work);
+ struct mutex *lock = &ds1305->rtc->ops_lock;
+ struct spi_device *spi = ds1305->spi;
+ u8 buf[3];
+ int status;
+
+ /* lock to protect ds1305->ctrl */
+ mutex_lock(lock);
+
+ /* Disable the IRQ, and clear its status ... for now, we "know"
+ * that if more than one alarm is active, they're in sync.
+ * Note that reading ALM data registers also clears IRQ status.
+ */
+ ds1305->ctrl[0] &= ~(DS1305_AEI1 | DS1305_AEI0);
+ ds1305->ctrl[1] = 0;
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+ buf[2] = 0;
+
+ status = spi_write_then_read(spi, buf, sizeof buf,
+ NULL, 0);
+ if (status < 0)
+ dev_dbg(&spi->dev, "clear irq --> %d\n", status);
+
+ mutex_unlock(lock);
+
+ if (!test_bit(FLAG_EXITING, &ds1305->flags))
+ enable_irq(spi->irq);
+
+ /* rtc_update_irq() requires an IRQ-disabled context */
+ local_irq_disable();
+ rtc_update_irq(ds1305->rtc, 1, RTC_AF | RTC_IRQF);
+ local_irq_enable();
+}
+
+/*
+ * This "real" IRQ handler hands off to a workqueue mostly to allow
+ * mutex locking for ds1305->ctrl ... unlike I2C, we could issue async
+ * I/O requests in IRQ context (to clear the IRQ status).
+ */
+static irqreturn_t ds1305_irq(int irq, void *p)
+{
+ struct ds1305 *ds1305 = p;
+
+ disable_irq(irq);
+ schedule_work(&ds1305->work);
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface for NVRAM
+ */
+
+static void msg_init(struct spi_message *m, struct spi_transfer *x,
+ u8 *addr, size_t count, char *tx, char *rx)
+{
+ spi_message_init(m);
+ memset(x, 0, 2 * sizeof(*x));
+
+ x->tx_buf = addr;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+
+ x->tx_buf = tx;
+ x->rx_buf = rx;
+ x->len = count;
+ spi_message_add_tail(x, m);
+}
+
+static ssize_t
+ds1305_nvram_read(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct spi_device *spi;
+ u8 addr;
+ struct spi_message m;
+ struct spi_transfer x[2];
+ int status;
+
+ spi = container_of(kobj, struct spi_device, dev.kobj);
+
+ if (unlikely(off >= DS1305_NVRAM_LEN))
+ return 0;
+ if (count >= DS1305_NVRAM_LEN)
+ count = DS1305_NVRAM_LEN;
+ if ((off + count) > DS1305_NVRAM_LEN)
+ count = DS1305_NVRAM_LEN - off;
+ if (unlikely(!count))
+ return count;
+
+ addr = DS1305_NVRAM + off;
+ msg_init(&m, x, &addr, count, NULL, buf);
+
+ status = spi_sync(spi, &m);
+ if (status < 0)
+ dev_err(&spi->dev, "nvram %s error %d\n", "read", status);
+ return (status < 0) ? status : count;
+}
+
+static ssize_t
+ds1305_nvram_write(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct spi_device *spi;
+ u8 addr;
+ struct spi_message m;
+ struct spi_transfer x[2];
+ int status;
+
+ spi = container_of(kobj, struct spi_device, dev.kobj);
+
+ if (unlikely(off >= DS1305_NVRAM_LEN))
+ return -EFBIG;
+ if (count >= DS1305_NVRAM_LEN)
+ count = DS1305_NVRAM_LEN;
+ if ((off + count) > DS1305_NVRAM_LEN)
+ count = DS1305_NVRAM_LEN - off;
+ if (unlikely(!count))
+ return count;
+
+ addr = (DS1305_WRITE | DS1305_NVRAM) + off;
+ msg_init(&m, x, &addr, count, buf, NULL);
+
+ status = spi_sync(spi, &m);
+ if (status < 0)
+ dev_err(&spi->dev, "nvram %s error %d\n", "write", status);
+ return (status < 0) ? status : count;
+}
+
+static struct bin_attribute nvram = {
+ .attr.name = "nvram",
+ .attr.mode = S_IRUGO | S_IWUSR,
+ .attr.owner = THIS_MODULE,
+ .read = ds1305_nvram_read,
+ .write = ds1305_nvram_write,
+ .size = DS1305_NVRAM_LEN,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to SPI stack
+ */
+
+static int __devinit ds1305_probe(struct spi_device *spi)
+{
+ struct ds1305 *ds1305;
+ struct rtc_device *rtc;
+ int status;
+ u8 addr, value;
+ struct ds1305_platform_data *pdata = spi->dev.platform_data;
+ bool write_ctrl = false;
+
+ /* Sanity check board setup data. This may be hooked up
+ * in 3wire mode, but we don't care. Note that unless
+ * there's an inverter in place, this needs SPI_CS_HIGH!
+ */
+ if ((spi->bits_per_word && spi->bits_per_word != 8)
+ || (spi->max_speed_hz > 2000000)
+ || !(spi->mode & SPI_CPHA))
+ return -EINVAL;
+
+ /* set up driver data */
+ ds1305 = kzalloc(sizeof *ds1305, GFP_KERNEL);
+ if (!ds1305)
+ return -ENOMEM;
+ ds1305->spi = spi;
+ spi_set_drvdata(spi, ds1305);
+
+ /* read and cache control registers */
+ addr = DS1305_CONTROL;
+ status = spi_write_then_read(spi, &addr, sizeof addr,
+ ds1305->ctrl, sizeof ds1305->ctrl);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "can't %s, %d\n",
+ "read", status);
+ goto fail0;
+ }
+
+ dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
+ "read", ds1305->ctrl[0],
+ ds1305->ctrl[1], ds1305->ctrl[2]);
+
+ /* Sanity check register values ... partially compensating for the
+ * fact that SPI has no device handshake. A pullup on MISO would
+ * make these tests fail; but not all systems will have one. If
+ * some register is neither 0x00 nor 0xff, a chip is likely there.
+ */
+ if ((ds1305->ctrl[0] & 0x38) != 0 || (ds1305->ctrl[1] & 0xfc) != 0) {
+ dev_dbg(&spi->dev, "RTC chip is not present\n");
+ status = -ENODEV;
+ goto fail0;
+ }
+ if (ds1305->ctrl[2] == 0)
+ dev_dbg(&spi->dev, "chip may not be present\n");
+
+ /* enable writes if needed ... if we were paranoid it would
+ * make sense to enable them only when absolutely necessary.
+ */
+ if (ds1305->ctrl[0] & DS1305_WP) {
+ u8 buf[2];
+
+ ds1305->ctrl[0] &= ~DS1305_WP;
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+ status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+
+ dev_dbg(&spi->dev, "clear WP --> %d\n", status);
+ if (status < 0)
+ goto fail0;
+ }
+
+ /* on DS1305, maybe start oscillator; like most low power
+ * oscillators, it may take a second to stabilize
+ */
+ if (ds1305->ctrl[0] & DS1305_nEOSC) {
+ ds1305->ctrl[0] &= ~DS1305_nEOSC;
+ write_ctrl = true;
+ dev_warn(&spi->dev, "SET TIME!\n");
+ }
+
+ /* ack any pending IRQs */
+ if (ds1305->ctrl[1]) {
+ ds1305->ctrl[1] = 0;
+ write_ctrl = true;
+ }
+
+ /* this may need one-time (re)init */
+ if (pdata) {
+ /* maybe enable trickle charge */
+ if (((ds1305->ctrl[2] & 0xf0) != DS1305_TRICKLE_MAGIC)) {
+ ds1305->ctrl[2] = DS1305_TRICKLE_MAGIC
+ | pdata->trickle;
+ write_ctrl = true;
+ }
+
+ /* on DS1306, configure 1 Hz signal */
+ if (pdata->is_ds1306) {
+ if (pdata->en_1hz) {
+ if (!(ds1305->ctrl[0] & DS1306_1HZ)) {
+ ds1305->ctrl[0] |= DS1306_1HZ;
+ write_ctrl = true;
+ }
+ } else {
+ if (ds1305->ctrl[0] & DS1306_1HZ) {
+ ds1305->ctrl[0] &= ~DS1306_1HZ;
+ write_ctrl = true;
+ }
+ }
+ }
+ }
+
+ if (write_ctrl) {
+ u8 buf[4];
+
+ buf[0] = DS1305_WRITE | DS1305_CONTROL;
+ buf[1] = ds1305->ctrl[0];
+ buf[2] = ds1305->ctrl[1];
+ buf[3] = ds1305->ctrl[2];
+ status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "can't %s, %d\n",
+ "write", status);
+ goto fail0;
+ }
+
+ dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
+ "write", ds1305->ctrl[0],
+ ds1305->ctrl[1], ds1305->ctrl[2]);
+ }
+
+ /* see if non-Linux software set up AM/PM mode */
+ addr = DS1305_HOUR;
+ status = spi_write_then_read(spi, &addr, sizeof addr,
+ &value, sizeof value);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "read HOUR --> %d\n", status);
+ goto fail0;
+ }
+
+ ds1305->hr12 = (DS1305_HR_12 & value) != 0;
+ if (ds1305->hr12)
+ dev_dbg(&spi->dev, "AM/PM\n");
+
+ /* register RTC ... from here on, ds1305->ctrl needs locking */
+ rtc = rtc_device_register("ds1305", &spi->dev,
+ &ds1305_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ status = PTR_ERR(rtc);
+ dev_dbg(&spi->dev, "register rtc --> %d\n", status);
+ goto fail0;
+ }
+ ds1305->rtc = rtc;
+
+ /* Maybe set up alarm IRQ; be ready to handle it triggering right
+ * away. NOTE that we don't share this. The signal is active low,
+ * and we can't ack it before a SPI message delay. We temporarily
+ * disable the IRQ until it's acked, which lets us work with more
+ * IRQ trigger modes (not all IRQ controllers can do falling edge).
+ */
+ if (spi->irq) {
+ INIT_WORK(&ds1305->work, ds1305_work);
+ status = request_irq(spi->irq, ds1305_irq,
+ 0, dev_name(&rtc->dev), ds1305);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "request_irq %d --> %d\n",
+ spi->irq, status);
+ goto fail1;
+ }
+ }
+
+ /* export NVRAM */
+ status = sysfs_create_bin_file(&spi->dev.kobj, &nvram);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "register nvram --> %d\n", status);
+ goto fail2;
+ }
+
+ return 0;
+
+fail2:
+ free_irq(spi->irq, ds1305);
+fail1:
+ rtc_device_unregister(rtc);
+fail0:
+ kfree(ds1305);
+ return status;
+}
+
+static int __devexit ds1305_remove(struct spi_device *spi)
+{
+ struct ds1305 *ds1305 = spi_get_drvdata(spi);
+
+ sysfs_remove_bin_file(&spi->dev.kobj, &nvram);
+
+ /* carefully shut down irq and workqueue, if present */
+ if (spi->irq) {
+ set_bit(FLAG_EXITING, &ds1305->flags);
+ free_irq(spi->irq, ds1305);
+ flush_scheduled_work();
+ }
+
+ rtc_device_unregister(ds1305->rtc);
+ spi_set_drvdata(spi, NULL);
+ kfree(ds1305);
+ return 0;
+}
+
+static struct spi_driver ds1305_driver = {
+ .driver.name = "rtc-ds1305",
+ .driver.owner = THIS_MODULE,
+ .probe = ds1305_probe,
+ .remove = __devexit_p(ds1305_remove),
+ /* REVISIT add suspend/resume */
+};
+
+static int __init ds1305_init(void)
+{
+ return spi_register_driver(&ds1305_driver);
+}
+module_init(ds1305_init);
+
+static void __exit ds1305_exit(void)
+{
+ spi_unregister_driver(&ds1305_driver);
+}
+module_exit(ds1305_exit);
+
+MODULE_DESCRIPTION("RTC driver for DS1305 and DS1306 chips");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 0a19c06019be..24bc1689fc74 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -13,21 +13,21 @@
*
*/
-#include <linux/module.h>
+#include <linux/bcd.h>
+#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
-#include <linux/i2c.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
#ifdef CONFIG_RTC_DRV_M41T80_WDT
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/reboot.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
+#include <linux/miscdevice.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
#endif
#define M41T80_REG_SSEC 0
@@ -631,14 +631,12 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
return -EFAULT;
if (rv & WDIOS_DISABLECARD) {
- printk(KERN_INFO
- "rtc-m41t80: disable watchdog\n");
+ pr_info("rtc-m41t80: disable watchdog\n");
wdt_disable();
}
if (rv & WDIOS_ENABLECARD) {
- printk(KERN_INFO
- "rtc-m41t80: enable watchdog\n");
+ pr_info("rtc-m41t80: enable watchdog\n");
wdt_ping();
}
diff --git a/drivers/rtc/rtc-m41t94.c b/drivers/rtc/rtc-m41t94.c
new file mode 100644
index 000000000000..9b19499c829e
--- /dev/null
+++ b/drivers/rtc/rtc-m41t94.c
@@ -0,0 +1,173 @@
+/*
+ * Driver for ST M41T94 SPI RTC
+ *
+ * Copyright (C) 2008 Kim B. Heino
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define M41T94_REG_SECONDS 0x01
+#define M41T94_REG_MINUTES 0x02
+#define M41T94_REG_HOURS 0x03
+#define M41T94_REG_WDAY 0x04
+#define M41T94_REG_DAY 0x05
+#define M41T94_REG_MONTH 0x06
+#define M41T94_REG_YEAR 0x07
+#define M41T94_REG_HT 0x0c
+
+#define M41T94_BIT_HALT 0x40
+#define M41T94_BIT_STOP 0x80
+#define M41T94_BIT_CB 0x40
+#define M41T94_BIT_CEB 0x80
+
+static int m41t94_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[8]; /* write cmd + 7 registers */
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */
+ buf[M41T94_REG_SECONDS] = BIN2BCD(tm->tm_sec);
+ buf[M41T94_REG_MINUTES] = BIN2BCD(tm->tm_min);
+ buf[M41T94_REG_HOURS] = BIN2BCD(tm->tm_hour);
+ buf[M41T94_REG_WDAY] = BIN2BCD(tm->tm_wday + 1);
+ buf[M41T94_REG_DAY] = BIN2BCD(tm->tm_mday);
+ buf[M41T94_REG_MONTH] = BIN2BCD(tm->tm_mon + 1);
+
+ buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB;
+ if (tm->tm_year >= 100)
+ buf[M41T94_REG_HOURS] |= M41T94_BIT_CB;
+ buf[M41T94_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
+
+ return spi_write(spi, buf, 8);
+}
+
+static int m41t94_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[2];
+ int ret, hour;
+
+ /* clear halt update bit */
+ ret = spi_w8r8(spi, M41T94_REG_HT);
+ if (ret < 0)
+ return ret;
+ if (ret & M41T94_BIT_HALT) {
+ buf[0] = 0x80 | M41T94_REG_HT;
+ buf[1] = ret & ~M41T94_BIT_HALT;
+ spi_write(spi, buf, 2);
+ }
+
+ /* clear stop bit */
+ ret = spi_w8r8(spi, M41T94_REG_SECONDS);
+ if (ret < 0)
+ return ret;
+ if (ret & M41T94_BIT_STOP) {
+ buf[0] = 0x80 | M41T94_REG_SECONDS;
+ buf[1] = ret & ~M41T94_BIT_STOP;
+ spi_write(spi, buf, 2);
+ }
+
+ tm->tm_sec = BCD2BIN(spi_w8r8(spi, M41T94_REG_SECONDS));
+ tm->tm_min = BCD2BIN(spi_w8r8(spi, M41T94_REG_MINUTES));
+ hour = spi_w8r8(spi, M41T94_REG_HOURS);
+ tm->tm_hour = BCD2BIN(hour & 0x3f);
+ tm->tm_wday = BCD2BIN(spi_w8r8(spi, M41T94_REG_WDAY)) - 1;
+ tm->tm_mday = BCD2BIN(spi_w8r8(spi, M41T94_REG_DAY));
+ tm->tm_mon = BCD2BIN(spi_w8r8(spi, M41T94_REG_MONTH)) - 1;
+ tm->tm_year = BCD2BIN(spi_w8r8(spi, M41T94_REG_YEAR));
+ if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB))
+ tm->tm_year += 100;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ /* initial clock setting can be undefined */
+ return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops m41t94_rtc_ops = {
+ .read_time = m41t94_read_time,
+ .set_time = m41t94_set_time,
+};
+
+static struct spi_driver m41t94_driver;
+
+static int __devinit m41t94_probe(struct spi_device *spi)
+{
+ struct rtc_device *rtc;
+ int res;
+
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ res = spi_w8r8(spi, M41T94_REG_SECONDS);
+ if (res < 0) {
+ dev_err(&spi->dev, "not found.\n");
+ return res;
+ }
+
+ rtc = rtc_device_register(m41t94_driver.driver.name,
+ &spi->dev, &m41t94_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ dev_set_drvdata(&spi->dev, rtc);
+
+ return 0;
+}
+
+static int __devexit m41t94_remove(struct spi_device *spi)
+{
+ struct rtc_device *rtc = platform_get_drvdata(spi);
+
+ if (rtc)
+ rtc_device_unregister(rtc);
+
+ return 0;
+}
+
+static struct spi_driver m41t94_driver = {
+ .driver = {
+ .name = "rtc-m41t94",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = m41t94_probe,
+ .remove = __devexit_p(m41t94_remove),
+};
+
+static __init int m41t94_init(void)
+{
+ return spi_register_driver(&m41t94_driver);
+}
+
+module_init(m41t94_init);
+
+static __exit void m41t94_exit(void)
+{
+ spi_unregister_driver(&m41t94_driver);
+}
+
+module_exit(m41t94_exit);
+
+MODULE_AUTHOR("Kim B. Heino <Kim.Heino@bluegiga.com>");
+MODULE_DESCRIPTION("Driver for ST M41T94 SPI RTC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index eb23d8423f42..8876605d4d4b 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -92,18 +92,6 @@
#define rtc_write(val, addr) omap_writeb(val, OMAP_RTC_BASE + (addr))
-/* platform_bus isn't hotpluggable, so for static linkage it'd be safe
- * to get rid of probe() and remove() code ... too bad the driver struct
- * remembers probe(), that's about 25% of the runtime footprint!!
- */
-#ifndef MODULE
-#undef __devexit
-#undef __devexit_p
-#define __devexit __exit
-#define __devexit_p __exit_p
-#endif
-
-
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
* so the only other requirement is that register accesses which
* require BUSY to be clear are made with IRQs locally disabled
@@ -324,7 +312,7 @@ static struct rtc_class_ops omap_rtc_ops = {
static int omap_rtc_alarm;
static int omap_rtc_timer;
-static int __devinit omap_rtc_probe(struct platform_device *pdev)
+static int __init omap_rtc_probe(struct platform_device *pdev)
{
struct resource *res, *mem;
struct rtc_device *rtc;
@@ -440,7 +428,7 @@ fail:
return -EIO;
}
-static int __devexit omap_rtc_remove(struct platform_device *pdev)
+static int __exit omap_rtc_remove(struct platform_device *pdev)
{
struct rtc_device *rtc = platform_get_drvdata(pdev);;
@@ -498,8 +486,7 @@ static void omap_rtc_shutdown(struct platform_device *pdev)
MODULE_ALIAS("platform:omap_rtc");
static struct platform_driver omap_rtc_driver = {
- .probe = omap_rtc_probe,
- .remove = __devexit_p(omap_rtc_remove),
+ .remove = __exit_p(omap_rtc_remove),
.suspend = omap_rtc_suspend,
.resume = omap_rtc_resume,
.shutdown = omap_rtc_shutdown,
@@ -511,7 +498,7 @@ static struct platform_driver omap_rtc_driver = {
static int __init rtc_init(void)
{
- return platform_driver_register(&omap_rtc_driver);
+ return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
}
module_init(rtc_init);
diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c
index 3d09d8f0b1f0..d388c662bf4b 100644
--- a/drivers/rtc/rtc-pcf8583.c
+++ b/drivers/rtc/rtc-pcf8583.c
@@ -2,6 +2,7 @@
* drivers/rtc/rtc-pcf8583.c
*
* Copyright (C) 2000 Russell King
+ * Copyright (C) 2008 Wolfram Sang & Juergen Beisert, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,7 +15,6 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <linux/string.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/errno.h>
@@ -27,7 +27,6 @@ struct rtc_mem {
};
struct pcf8583 {
- struct i2c_client client;
struct rtc_device *rtc;
unsigned char ctrl;
};
@@ -40,10 +39,6 @@ struct pcf8583 {
#define CTRL_ALARM 0x02
#define CTRL_TIMER 0x01
-static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
-
-/* Module parameters */
-I2C_CLIENT_INSMOD;
static struct i2c_driver pcf8583_driver;
@@ -269,106 +264,60 @@ static const struct rtc_class_ops pcf8583_rtc_ops = {
.set_time = pcf8583_rtc_set_time,
};
-static int pcf8583_probe(struct i2c_adapter *adap, int addr, int kind);
-
-static int pcf8583_attach(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, pcf8583_probe);
-}
-
-static int pcf8583_detach(struct i2c_client *client)
-{
- int err;
- struct pcf8583 *pcf = i2c_get_clientdata(client);
- struct rtc_device *rtc = pcf->rtc;
-
- if (rtc)
- rtc_device_unregister(rtc);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(pcf);
- return 0;
-}
-
-static struct i2c_driver pcf8583_driver = {
- .driver = {
- .name = "pcf8583",
- },
- .id = I2C_DRIVERID_PCF8583,
- .attach_adapter = pcf8583_attach,
- .detach_client = pcf8583_detach,
-};
-
-static int pcf8583_probe(struct i2c_adapter *adap, int addr, int kind)
+static int pcf8583_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct pcf8583 *pcf;
- struct i2c_client *client;
- struct rtc_device *rtc;
- unsigned char buf[1], ad[1] = { 0 };
+ struct pcf8583 *pcf8583;
int err;
- struct i2c_msg msgs[2] = {
- {
- .addr = addr,
- .flags = 0,
- .len = 1,
- .buf = ad,
- }, {
- .addr = addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = buf,
- }
- };
- if (!i2c_check_functionality(adap, I2C_FUNC_I2C))
- return 0;
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
- pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
- if (!pcf)
+ pcf8583 = kzalloc(sizeof(struct pcf8583), GFP_KERNEL);
+ if (!pcf8583)
return -ENOMEM;
- client = &pcf->client;
+ pcf8583->rtc = rtc_device_register(pcf8583_driver.driver.name,
+ &client->dev, &pcf8583_rtc_ops, THIS_MODULE);
- client->addr = addr;
- client->adapter = adap;
- client->driver = &pcf8583_driver;
-
- strlcpy(client->name, pcf8583_driver.driver.name, I2C_NAME_SIZE);
-
- if (i2c_transfer(client->adapter, msgs, 2) != 2) {
- err = -EIO;
+ if (IS_ERR(pcf8583->rtc)) {
+ err = PTR_ERR(pcf8583->rtc);
goto exit_kfree;
}
- err = i2c_attach_client(client);
-
- if (err)
- goto exit_kfree;
-
- rtc = rtc_device_register(pcf8583_driver.driver.name, &client->dev,
- &pcf8583_rtc_ops, THIS_MODULE);
+ i2c_set_clientdata(client, pcf8583);
+ return 0;
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
- goto exit_detach;
- }
+exit_kfree:
+ kfree(pcf8583);
+ return err;
+}
- pcf->rtc = rtc;
- i2c_set_clientdata(client, pcf);
- set_ctrl(client, buf[0]);
+static int __devexit pcf8583_remove(struct i2c_client *client)
+{
+ struct pcf8583 *pcf8583 = i2c_get_clientdata(client);
+ if (pcf8583->rtc)
+ rtc_device_unregister(pcf8583->rtc);
+ kfree(pcf8583);
return 0;
+}
-exit_detach:
- i2c_detach_client(client);
-
-exit_kfree:
- kfree(pcf);
+static const struct i2c_device_id pcf8583_id[] = {
+ { "pcf8583", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8583_id);
- return err;
-}
+static struct i2c_driver pcf8583_driver = {
+ .driver = {
+ .name = "pcf8583",
+ .owner = THIS_MODULE,
+ },
+ .probe = pcf8583_probe,
+ .remove = __devexit_p(pcf8583_remove),
+ .id_table = pcf8583_id,
+};
static __init int pcf8583_init(void)
{
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index fed86e507fdf..54b1ebb01502 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -36,10 +36,8 @@ static struct resource *s3c_rtc_mem;
static void __iomem *s3c_rtc_base;
static int s3c_rtc_alarmno = NO_IRQ;
static int s3c_rtc_tickno = NO_IRQ;
-static int s3c_rtc_freq = 1;
static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
-static unsigned int tick_count;
/* IRQ Handlers */
@@ -55,7 +53,7 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
{
struct rtc_device *rdev = id;
- rtc_update_irq(rdev, tick_count++, RTC_PF | RTC_IRQF);
+ rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
return IRQ_HANDLED;
}
@@ -74,35 +72,37 @@ static void s3c_rtc_setaie(int to)
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
}
-static void s3c_rtc_setpie(int to)
+static int s3c_rtc_setpie(struct device *dev, int enabled)
{
unsigned int tmp;
- pr_debug("%s: pie=%d\n", __func__, to);
+ pr_debug("%s: pie=%d\n", __func__, enabled);
spin_lock_irq(&s3c_rtc_pie_lock);
tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
- if (to)
+ if (enabled)
tmp |= S3C2410_TICNT_ENABLE;
writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
+
+ return 0;
}
-static void s3c_rtc_setfreq(int freq)
+static int s3c_rtc_setfreq(struct device *dev, int freq)
{
unsigned int tmp;
spin_lock_irq(&s3c_rtc_pie_lock);
- tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
-
- s3c_rtc_freq = freq;
+ tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
tmp |= (128 / freq)-1;
writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
+
+ return 0;
}
/* Time read/write */
@@ -267,12 +267,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
writeb(alrm_en, base + S3C2410_RTCALM);
- if (0) {
- alrm_en = readb(base + S3C2410_RTCALM);
- alrm_en &= ~S3C2410_RTCALM_ALMEN;
- writeb(alrm_en, base + S3C2410_RTCALM);
- disable_irq_wake(s3c_rtc_alarmno);
- }
+ s3c_rtc_setaie(alrm->enabled);
if (alrm->enabled)
enable_irq_wake(s3c_rtc_alarmno);
@@ -282,59 +277,12 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
return 0;
}
-static int s3c_rtc_ioctl(struct device *dev,
- unsigned int cmd, unsigned long arg)
-{
- unsigned int ret = -ENOIOCTLCMD;
-
- switch (cmd) {
- case RTC_AIE_OFF:
- case RTC_AIE_ON:
- s3c_rtc_setaie((cmd == RTC_AIE_ON) ? 1 : 0);
- ret = 0;
- break;
-
- case RTC_PIE_OFF:
- case RTC_PIE_ON:
- tick_count = 0;
- s3c_rtc_setpie((cmd == RTC_PIE_ON) ? 1 : 0);
- ret = 0;
- break;
-
- case RTC_IRQP_READ:
- ret = put_user(s3c_rtc_freq, (unsigned long __user *)arg);
- break;
-
- case RTC_IRQP_SET:
- if (!is_power_of_2(arg)) {
- ret = -EINVAL;
- goto exit;
- }
-
- pr_debug("s3c2410_rtc: setting frequency %ld\n", arg);
-
- s3c_rtc_setfreq(arg);
- ret = 0;
- break;
-
- case RTC_UIE_ON:
- case RTC_UIE_OFF:
- ret = -EINVAL;
- }
-
- exit:
- return ret;
-}
-
static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
{
unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
seq_printf(seq, "periodic_IRQ\t: %s\n",
(ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" );
-
- seq_printf(seq, "periodic_freq\t: %d\n", s3c_rtc_freq);
-
return 0;
}
@@ -374,7 +322,7 @@ static void s3c_rtc_release(struct device *dev)
/* do not clear AIE here, it may be needed for wake */
- s3c_rtc_setpie(0);
+ s3c_rtc_setpie(dev, 0);
free_irq(s3c_rtc_alarmno, rtc_dev);
free_irq(s3c_rtc_tickno, rtc_dev);
}
@@ -382,11 +330,12 @@ static void s3c_rtc_release(struct device *dev)
static const struct rtc_class_ops s3c_rtcops = {
.open = s3c_rtc_open,
.release = s3c_rtc_release,
- .ioctl = s3c_rtc_ioctl,
.read_time = s3c_rtc_gettime,
.set_time = s3c_rtc_settime,
.read_alarm = s3c_rtc_getalarm,
.set_alarm = s3c_rtc_setalarm,
+ .irq_set_freq = s3c_rtc_setfreq,
+ .irq_set_state = s3c_rtc_setpie,
.proc = s3c_rtc_proc,
};
@@ -430,14 +379,14 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
}
}
-static int s3c_rtc_remove(struct platform_device *dev)
+static int __devexit s3c_rtc_remove(struct platform_device *dev)
{
struct rtc_device *rtc = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
rtc_device_unregister(rtc);
- s3c_rtc_setpie(0);
+ s3c_rtc_setpie(&dev->dev, 0);
s3c_rtc_setaie(0);
iounmap(s3c_rtc_base);
@@ -447,7 +396,7 @@ static int s3c_rtc_remove(struct platform_device *dev)
return 0;
}
-static int s3c_rtc_probe(struct platform_device *pdev)
+static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
@@ -504,7 +453,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
pr_debug("s3c2410_rtc: RTCCON=%02x\n",
readb(s3c_rtc_base + S3C2410_RTCCON));
- s3c_rtc_setfreq(s3c_rtc_freq);
+ s3c_rtc_setfreq(&pdev->dev, 1);
/* register RTC and exit */
@@ -560,7 +509,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
static struct platform_driver s3c2410_rtcdrv = {
.probe = s3c_rtc_probe,
- .remove = s3c_rtc_remove,
+ .remove = __devexit_p(s3c_rtc_remove),
.suspend = s3c_rtc_suspend,
.resume = s3c_rtc_resume,
.driver = {
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index be9c70d0b193..884b635f028b 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Real Time Clock unit.
*
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@
MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
/* RTC 1 registers */
#define ETIMELREG 0x00
@@ -82,7 +82,6 @@ static unsigned long epoch = 1970; /* Jan 1 1970 00:00:00 */
static DEFINE_SPINLOCK(rtc_lock);
static char rtc_name[] = "RTC";
-static unsigned long periodic_frequency;
static unsigned long periodic_count;
static unsigned int alarm_enabled;
static int aie_irq = -1;
@@ -207,10 +206,37 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
return 0;
}
-static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq)
{
unsigned long count;
+ count = RTC_FREQUENCY;
+ do_div(count, freq);
+
+ periodic_count = count;
+
+ spin_lock_irq(&rtc_lock);
+
+ rtc1_write(RTCL1LREG, count);
+ rtc1_write(RTCL1HREG, count >> 16);
+
+ spin_unlock_irq(&rtc_lock);
+
+ return 0;
+}
+
+static int vr41xx_rtc_irq_set_state(struct device *dev, int enabled)
+{
+ if (enabled)
+ enable_irq(pie_irq);
+ else
+ disable_irq(pie_irq);
+
+ return 0;
+}
+
+static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
switch (cmd) {
case RTC_AIE_ON:
spin_lock_irq(&rtc_lock);
@@ -232,33 +258,6 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
spin_unlock_irq(&rtc_lock);
break;
- case RTC_PIE_ON:
- enable_irq(pie_irq);
- break;
- case RTC_PIE_OFF:
- disable_irq(pie_irq);
- break;
- case RTC_IRQP_READ:
- return put_user(periodic_frequency, (unsigned long __user *)arg);
- break;
- case RTC_IRQP_SET:
- if (arg > MAX_PERIODIC_RATE)
- return -EINVAL;
-
- periodic_frequency = arg;
-
- count = RTC_FREQUENCY;
- do_div(count, arg);
-
- periodic_count = count;
-
- spin_lock_irq(&rtc_lock);
-
- rtc1_write(RTCL1LREG, count);
- rtc1_write(RTCL1HREG, count >> 16);
-
- spin_unlock_irq(&rtc_lock);
- break;
case RTC_EPOCH_READ:
return put_user(epoch, (unsigned long __user *)arg);
case RTC_EPOCH_SET:
@@ -309,6 +308,8 @@ static const struct rtc_class_ops vr41xx_rtc_ops = {
.set_time = vr41xx_rtc_set_time,
.read_alarm = vr41xx_rtc_read_alarm,
.set_alarm = vr41xx_rtc_set_alarm,
+ .irq_set_freq = vr41xx_rtc_irq_set_freq,
+ .irq_set_state = vr41xx_rtc_irq_set_state,
};
static int __devinit rtc_probe(struct platform_device *pdev)
@@ -346,6 +347,8 @@ static int __devinit rtc_probe(struct platform_device *pdev)
goto err_iounmap_all;
}
+ rtc->max_user_freq = MAX_PERIODIC_RATE;
+
spin_lock_irq(&rtc_lock);
rtc1_write(ECMPLREG, 0);
OpenPOWER on IntegriCloud