diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/bq24022.c | 6 | ||||
| -rw-r--r-- | drivers/regulator/pcf50633-regulator.c | 329 | ||||
| -rw-r--r-- | drivers/regulator/wm8350-regulator.c | 2 | ||||
| -rw-r--r-- | drivers/regulator/wm8400-regulator.c | 2 |
6 files changed, 340 insertions, 7 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 39360e2a4540..e7e0cf102d6d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -73,4 +73,11 @@ config REGULATOR_DA903X Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. +config REGULATOR_PCF50633 + tristate "PCF50633 regulator driver" + depends on MFD_PCF50633 + help + Say Y here to support the voltage regulators and convertors + on PCF50633 + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 254d40c02ee8..61b30c6ddecc 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565aba865..c175e38a4cd5 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c new file mode 100644 index 000000000000..4cc85ec6e120 --- /dev/null +++ b/drivers/regulator/pcf50633-regulator.c @@ -0,0 +1,329 @@ +/* NXP PCF50633 PMIC Driver + * + * (C) 2006-2008 by Openmoko, Inc. + * Author: Balaji Rao <balajirrao@openmoko.org> + * All rights reserved. + * + * Broken down from monstrous PCF50633 driver mainly by + * Harald Welte and Andy Green and Werner Almesberger + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/pmic.h> + +#define PCF50633_REGULATOR(_name, _id) \ + { \ + .name = _name, \ + .id = _id, \ + .ops = &pcf50633_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { + [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, + [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, + [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, + [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, + [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, + [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, + [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, + [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, + [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, + [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, + [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, +}; + +/* Bits from voltage value */ +static u8 auto_voltage_bits(unsigned int millivolts) +{ + if (millivolts < 1800) + return 0; + if (millivolts > 3800) + return 0xff; + + millivolts -= 625; + + return millivolts / 25; +} + +static u8 down_voltage_bits(unsigned int millivolts) +{ + if (millivolts < 625) + return 0; + else if (millivolts > 3000) + return 0xff; + + millivolts -= 625; + + return millivolts / 25; +} + +static u8 ldo_voltage_bits(unsigned int millivolts) +{ + if (millivolts < 900) + return 0; + else if (millivolts > 3600) + return 0x1f; + + millivolts -= 900; + return millivolts / 100; +} + +/* Obtain voltage value from bits */ +static unsigned int auto_voltage_value(u8 bits) +{ + if (bits < 0x2f) + return 0; + + return 625 + (bits * 25); +} + + +static unsigned int down_voltage_value(u8 bits) +{ + return 625 + (bits * 25); +} + + +static unsigned int ldo_voltage_value(u8 bits) +{ + bits &= 0x1f; + + return 900 + (bits * 100); +} + +static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pcf50633 *pcf; + int regulator_id, millivolts; + u8 volt_bits, regnr; + + pcf = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + millivolts = min_uV / 1000; + + regnr = pcf50633_regulator_registers[regulator_id]; + + switch (regulator_id) { + case PCF50633_REGULATOR_AUTO: + volt_bits = auto_voltage_bits(millivolts); + break; + case PCF50633_REGULATOR_DOWN1: + volt_bits = down_voltage_bits(millivolts); + break; + case PCF50633_REGULATOR_DOWN2: + volt_bits = down_voltage_bits(millivolts); + break; + case PCF50633_REGULATOR_LDO1: + case PCF50633_REGULATOR_LDO2: + case PCF50633_REGULATOR_LDO3: + case PCF50633_REGULATOR_LDO4: + case PCF50633_REGULATOR_LDO5: + case PCF50633_REGULATOR_LDO6: + case PCF50633_REGULATOR_HCLDO: + volt_bits = ldo_voltage_bits(millivolts); + break; + default: + return -EINVAL; + } + + return pcf50633_reg_write(pcf, regnr, volt_bits); +} + +static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pcf50633 *pcf; + int regulator_id, millivolts, volt_bits; + u8 regnr; + + pcf = rdev_get_drvdata(rdev);; + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + regnr = pcf50633_regulator_registers[regulator_id]; + + volt_bits = pcf50633_reg_read(pcf, regnr); + if (volt_bits < 0) + return -1; + + switch (regulator_id) { + case PCF50633_REGULATOR_AUTO: + millivolts = auto_voltage_value(volt_bits); + break; + case PCF50633_REGULATOR_DOWN1: + millivolts = down_voltage_value(volt_bits); + break; + case PCF50633_REGULATOR_DOWN2: + millivolts = down_voltage_value(volt_bits); + break; + case PCF50633_REGULATOR_LDO1: + case PCF50633_REGULATOR_LDO2: + case PCF50633_REGULATOR_LDO3: + case PCF50633_REGULATOR_LDO4: + case PCF50633_REGULATOR_LDO5: + case PCF50633_REGULATOR_LDO6: + case PCF50633_REGULATOR_HCLDO: + millivolts = ldo_voltage_value(volt_bits); + break; + default: + return -EINVAL; + } + + return millivolts * 1000; +} + +static int pcf50633_regulator_enable(struct regulator_dev *rdev) +{ + struct pcf50633 *pcf = rdev_get_drvdata(rdev); + int regulator_id; + u8 regnr; + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + /* The *ENA register is always one after the *OUT register */ + regnr = pcf50633_regulator_registers[regulator_id] + 1; + + return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON, + PCF50633_REGULATOR_ON); +} + +static int pcf50633_regulator_disable(struct regulator_dev *rdev) +{ + struct pcf50633 *pcf = rdev_get_drvdata(rdev); + int regulator_id; + u8 regnr; + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + /* the *ENA register is always one after the *OUT register */ + regnr = pcf50633_regulator_registers[regulator_id] + 1; + + return pcf50633_reg_set_bit_mask(pcf, regnr, + PCF50633_REGULATOR_ON, 0); +} + +static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct pcf50633 *pcf = rdev_get_drvdata(rdev); + int regulator_id = rdev_get_id(rdev); + u8 regnr; + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + /* the *ENA register is always one after the *OUT register */ + regnr = pcf50633_regulator_registers[regulator_id] + 1; + + return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON; +} + +static struct regulator_ops pcf50633_regulator_ops = { + .set_voltage = pcf50633_regulator_set_voltage, + .get_voltage = pcf50633_regulator_get_voltage, + .enable = pcf50633_regulator_enable, + .disable = pcf50633_regulator_disable, + .is_enabled = pcf50633_regulator_is_enabled, +}; + +static struct regulator_desc regulators[] = { + [PCF50633_REGULATOR_AUTO] = + PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO), + [PCF50633_REGULATOR_DOWN1] = + PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1), + [PCF50633_REGULATOR_DOWN2] = + PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2), + [PCF50633_REGULATOR_LDO1] = + PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1), + [PCF50633_REGULATOR_LDO2] = + PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2), + [PCF50633_REGULATOR_LDO3] = + PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3), + [PCF50633_REGULATOR_LDO4] = + PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4), + [PCF50633_REGULATOR_LDO5] = + PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5), + [PCF50633_REGULATOR_LDO6] = + PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6), + [PCF50633_REGULATOR_HCLDO] = + PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO), + [PCF50633_REGULATOR_MEMLDO] = + PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO), +}; + +static int __devinit pcf50633_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + struct pcf50633 *pcf; + + /* Already set by core driver */ + pcf = platform_get_drvdata(pdev); + + rdev = regulator_register(®ulators[pdev->id], &pdev->dev, pcf); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + if (pcf->pdata->regulator_registered) + pcf->pdata->regulator_registered(pcf, pdev->id); + + return 0; +} + +static int __devexit pcf50633_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static struct platform_driver pcf50633_regulator_driver = { + .driver = { + .name = "pcf50633-regltr", + }, + .probe = pcf50633_regulator_probe, + .remove = __devexit_p(pcf50633_regulator_remove), +}; + +static int __init pcf50633_regulator_init(void) +{ + return platform_driver_register(&pcf50633_regulator_driver); +} +module_init(pcf50633_regulator_init); + +static void __exit pcf50633_regulator_exit(void) +{ + platform_driver_unregister(&pcf50633_regulator_driver); +} +module_exit(pcf50633_regulator_exit); + +MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>"); +MODULE_DESCRIPTION("PCF50633 regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcf50633-regulator"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa35248181b..5056e23e4414 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 48b372e038a8..56e23d44ba59 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -289,7 +289,7 @@ static struct regulator_desc regulators[] = { }, }; -static int __init wm8400_regulator_probe(struct platform_device *pdev) +static int __devinit wm8400_regulator_probe(struct platform_device *pdev) { struct regulator_dev *rdev; |
