diff options
Diffstat (limited to 'drivers/regulator/palmas-regulator.c')
| -rw-r--r-- | drivers/regulator/palmas-regulator.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 488dfe7ce9a6..7e2b165972e6 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -201,13 +201,7 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500}; #define SMPS_CTRL_MODE_ECO 0x02 #define SMPS_CTRL_MODE_PWM 0x03 -/* These values are derived from the data sheet. And are the number of steps - * where there is a voltage change, the ranges at beginning and end of register - * max/min values where there are no change are ommitted. - * - * So they are basically (maxV-minV)/stepV - */ -#define PALMAS_SMPS_NUM_VOLTAGES 117 +#define PALMAS_SMPS_NUM_VOLTAGES 122 #define PALMAS_SMPS10_NUM_VOLTAGES 2 #define PALMAS_LDO_NUM_VOLTAGES 50 @@ -979,6 +973,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 900000; pmic->desc[id].uV_step = 50000; pmic->desc[id].linear_min_sel = 1; + pmic->desc[id].enable_time = 500; pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].vsel_addr); @@ -997,6 +992,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 450000; pmic->desc[id].uV_step = 25000; } + + /* LOD6 in vibrator mode will have enable time 2000us */ + if (pdata && pdata->ldo6_vibrator && + (id == PALMAS_REG_LDO6)) + pmic->desc[id].enable_time = 2000; } else { pmic->desc[id].n_voltages = 1; pmic->desc[id].ops = &palmas_ops_extreg; |
