diff options
Diffstat (limited to 'drivers/power/bq24190_charger.c')
| -rw-r--r-- | drivers/power/bq24190_charger.c | 1549 |
1 files changed, 1549 insertions, 0 deletions
diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c new file mode 100644 index 000000000000..ad3ff8fbfbbb --- /dev/null +++ b/drivers/power/bq24190_charger.c @@ -0,0 +1,1549 @@ +/* + * Driver for the TI bq24190 battery charger. + * + * Author: Mark A. Greer <mgreer@animalcreek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/of_irq.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/power_supply.h> +#include <linux/gpio.h> +#include <linux/i2c.h> + +#include <linux/power/bq24190_charger.h> + + +#define BQ24190_MANUFACTURER "Texas Instruments" + +#define BQ24190_REG_ISC 0x00 /* Input Source Control */ +#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7) +#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7 +#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \ + BIT(3)) +#define BQ24190_REG_ISC_VINDPM_SHIFT 3 +#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BQ24190_REG_ISC_IINLIM_SHIFT 0 + +#define BQ24190_REG_POC 0x01 /* Power-On Configuration */ +#define BQ24190_REG_POC_RESET_MASK BIT(7) +#define BQ24190_REG_POC_RESET_SHIFT 7 +#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6) +#define BQ24190_REG_POC_WDT_RESET_SHIFT 6 +#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4 +#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) +#define BQ24190_REG_POC_SYS_MIN_SHIFT 1 +#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0) +#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0 + +#define BQ24190_REG_CCC 0x02 /* Charge Current Control */ +#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_CCC_ICHG_SHIFT 2 +#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0) +#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0 + +#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */ +#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4)) +#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4 +#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \ + BIT(0)) +#define BQ24190_REG_PCTCC_ITERM_SHIFT 0 + +#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */ +#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \ + BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_CVC_VREG_SHIFT 2 +#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1) +#define BQ24190_REG_CVC_BATLOWV_SHIFT 1 +#define BQ24190_REG_CVC_VRECHG_MASK BIT(0) +#define BQ24190_REG_CVC_VRECHG_SHIFT 0 + +#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */ +#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7) +#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7 +#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6) +#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6 +#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4 +#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3) +#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3 +#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1)) +#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1 +#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0) +#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0 + +#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */ +#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5)) +#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5 +#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2 +#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_ICTRC_TREG_SHIFT 0 + +#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */ +#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7) +#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7 +#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6) +#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6 +#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5) +#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5 +#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4) +#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4 +#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_MOC_INT_MASK_SHIFT 0 + +#define BQ24190_REG_SS 0x08 /* System Status */ +#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6)) +#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6 +#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4 +#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3) +#define BQ24190_REG_SS_DPM_STAT_SHIFT 3 +#define BQ24190_REG_SS_PG_STAT_MASK BIT(2) +#define BQ24190_REG_SS_PG_STAT_SHIFT 2 +#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1) +#define BQ24190_REG_SS_THERM_STAT_SHIFT 1 +#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0) +#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0 + +#define BQ24190_REG_F 0x09 /* Fault */ +#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7) +#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7 +#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6) +#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6 +#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4)) +#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4 +#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3) +#define BQ24190_REG_F_BAT_FAULT_SHIFT 3 +#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BQ24190_REG_F_NTC_FAULT_SHIFT 0 + +#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */ +#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3)) +#define BQ24190_REG_VPRS_PN_SHIFT 3 +#define BQ24190_REG_VPRS_PN_24190 0x4 +#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193 */ +#define BQ24190_REG_VPRS_PN_24192I 0x3 +#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2) +#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2 +#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0)) +#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0 + +/* + * The FAULT register is latched by the bq24190 (except for NTC_FAULT) + * so the first read after a fault returns the latched value and subsequent + * reads return the current value. In order to return the fault status + * to the user, have the interrupt handler save the reg's value and retrieve + * it in the appropriate health/status routine. Each routine has its own + * flag indicating whether it should use the value stored by the last run + * of the interrupt handler or do an actual reg read. That way each routine + * can report back whatever fault may have occured. + */ +struct bq24190_dev_info { + struct i2c_client *client; + struct device *dev; + struct power_supply charger; + struct power_supply battery; + char model_name[I2C_NAME_SIZE]; + kernel_ulong_t model; + unsigned int gpio_int; + unsigned int irq; + struct mutex f_reg_lock; + bool first_time; + bool charger_health_valid; + bool battery_health_valid; + bool battery_status_valid; + u8 f_reg; + u8 ss_reg; + u8 watchdog; +}; + +/* + * The tables below provide a 2-way mapping for the value that goes in + * the register field and the real-world value that it represents. + * The index of the array is the value that goes in the register; the + * number at that index in the array is the real-world value that it + * represents. + */ +/* REG02[7:2] (ICHG) in uAh */ +static const int bq24190_ccc_ichg_values[] = { + 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, + 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, + 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, + 2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000, + 2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000, + 3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000, + 3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000, + 4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000 +}; + +/* REG04[7:2] (VREG) in uV */ +static const int bq24190_cvc_vreg_values[] = { + 3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000, + 3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000, + 3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000, + 3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000, + 4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000, + 4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000, + 4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000, + 4400000 +}; + +/* REG06[1:0] (TREG) in tenths of degrees Celcius */ +static const int bq24190_ictrc_treg_values[] = { + 600, 800, 1000, 1200 +}; + +/* + * Return the index in 'tbl' of greatest value that is less than or equal to + * 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that + * the values in 'tbl' are sorted from smallest to largest and 'tbl_size' + * is less than 2^8. + */ +static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v) +{ + int i; + + for (i = 1; i < tbl_size; i++) + if (v < tbl[i]) + break; + + return i - 1; +} + +/* Basic driver I/O routines */ + +static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(bdi->client, reg); + if (ret < 0) + return ret; + + *data = ret; + return 0; +} + +static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(bdi->client, reg, data); +} + +static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg, + u8 mask, u8 shift, u8 *data) +{ + u8 v; + int ret; + + ret = bq24190_read(bdi, reg, &v); + if (ret < 0) + return ret; + + v &= mask; + v >>= shift; + *data = v; + + return 0; +} + +static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg, + u8 mask, u8 shift, u8 data) +{ + u8 v; + int ret; + + ret = bq24190_read(bdi, reg, &v); + if (ret < 0) + return ret; + + v &= ~mask; + v |= ((data << shift) & mask); + + return bq24190_write(bdi, reg, v); +} + +static int bq24190_get_field_val(struct bq24190_dev_info *bdi, + u8 reg, u8 mask, u8 shift, + const int tbl[], int tbl_size, + int *val) +{ + u8 v; + int ret; + + ret = bq24190_read_mask(bdi, reg, mask, shift, &v); + if (ret < 0) + return ret; + + v = (v >= tbl_size) ? (tbl_size - 1) : v; + *val = tbl[v]; + + return 0; +} + +static int bq24190_set_field_val(struct bq24190_dev_info *bdi, + u8 reg, u8 mask, u8 shift, + const int tbl[], int tbl_size, + int val) +{ + u8 idx; + + idx = bq24190_find_idx(tbl, tbl_size, val); + + return bq24190_write_mask(bdi, reg, mask, shift, idx); +} + +#ifdef CONFIG_SYSFS +/* + * There are a numerous options that are configurable on the bq24190 + * that go well beyond what the power_supply properties provide access to. + * Provide sysfs access to them so they can be examined and possibly modified + * on the fly. They will be provided for the charger power_supply object only + * and will be prefixed by 'f_' to make them easier to recognize. + */ + +#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \ +{ \ + .attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \ + .reg = BQ24190_REG_##r, \ + .mask = BQ24190_REG_##r##_##f##_MASK, \ + .shift = BQ24190_REG_##r##_##f##_SHIFT, \ +} + +#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \ + BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \ + bq24190_sysfs_store) + +#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \ + BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL) + +static ssize_t bq24190_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t bq24190_sysfs_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); + +struct bq24190_sysfs_field_info { + struct device_attribute attr; + u8 reg; + u8 mask; + u8 shift; +}; + +/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */ +#undef SS + +static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = { + /* sysfs name reg field in reg */ + BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ), + BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM), + BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM), + BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG), + BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN), + BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM), + BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG), + BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT), + BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG), + BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM), + BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG), + BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV), + BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG), + BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM), + BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT), + BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG), + BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER), + BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER), + BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET), + BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP), + BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP), + BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG), + BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN), + BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN), + BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE), + BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET), + BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK), + BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT), + BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT), + BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT), + BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT), + BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT), + BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT), + BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT), + BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT), + BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT), + BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT), + BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT), + BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN), + BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE), + BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG), +}; + +static struct attribute * + bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1]; + +static const struct attribute_group bq24190_sysfs_attr_group = { + .attrs = bq24190_sysfs_attrs, +}; + +static void bq24190_sysfs_init_attrs(void) +{ + int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); + + for (i = 0; i < limit; i++) + bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr; + + bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */ +} + +static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup( + const char *name) +{ + int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); + + for (i = 0; i < limit; i++) + if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name)) + break; + + if (i >= limit) + return NULL; + + return &bq24190_sysfs_field_tbl[i]; +} + +static ssize_t bq24190_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + struct bq24190_sysfs_field_info *info; + int ret; + u8 v; + + info = bq24190_sysfs_field_lookup(attr->attr.name); + if (!info) + return -EINVAL; + + ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%hhx\n", v); +} + +static ssize_t bq24190_sysfs_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + struct bq24190_sysfs_field_info *info; + int ret; + u8 v; + + info = bq24190_sysfs_field_lookup(attr->attr.name); + if (!info) + return -EINVAL; + + ret = kstrtou8(buf, 0, &v); + if (ret < 0) + return ret; + + ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v); + if (ret) + return ret; + + return count; +} + +static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi) +{ + bq24190_sysfs_init_attrs(); + + return sysfs_create_group(&bdi->charger.dev->kobj, + &bq24190_sysfs_attr_group); +} + +static void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) +{ + sysfs_remove_group(&bdi->charger.dev->kobj, &bq24190_sysfs_attr_group); +} +#else +static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi) +{ + return 0; +} + +static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {} +#endif + +/* + * According to the "Host Mode and default Mode" section of the + * manual, a write to any register causes the bq24190 to switch + * from default mode to host mode. It will switch back to default + * mode after a WDT timeout unless the WDT is turned off as well. + * So, by simply turning off the WDT, we accomplish both with the + * same write. + */ +static int bq24190_set_mode_host(struct bq24190_dev_info *bdi) +{ + int ret; + u8 v; + + ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v); + if (ret < 0) + return ret; + + bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >> + BQ24190_REG_CTTC_WATCHDOG_SHIFT); + v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK; + + return bq24190_write(bdi, BQ24190_REG_CTTC, v); +} + +static int bq24190_register_reset(struct bq24190_dev_info *bdi) +{ + int ret, limit = 100; + u8 v; + + /* Reset the registers */ + ret = bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_RESET_MASK, + BQ24190_REG_POC_RESET_SHIFT, + 0x1); + if (ret < 0) + return ret; + + /* Reset bit will be cleared by hardware so poll until it is */ + do { + ret = bq24190_read_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_RESET_MASK, + BQ24190_REG_POC_RESET_SHIFT, + &v); + if (ret < 0) + return ret; + + if (!v) + break; + + udelay(10); + } while (--limit); + + if (!limit) + return -EIO; + + return 0; +} + +/* Charger power supply property routines */ + +static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int type, ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, + &v); + if (ret < 0) + return ret; + + /* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */ + if (!v) { + type = POWER_SUPPLY_CHARGE_TYPE_NONE; + } else { + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, + &v); + if (ret < 0) + return ret; + + type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE : + POWER_SUPPLY_CHARGE_TYPE_FAST; + } + + val->intval = type; + + return 0; +} + +static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + u8 chg_config, force_20pct, en_term; + int ret; + + /* + * According to the "Termination when REG02[0] = 1" section of + * the bq24190 manual, the trickle charge could be less than the + * termination current so it recommends turning off the termination + * function. + * + * Note: AFAICT from the datasheet, the user will have to manually + * turn off the charging when in 20% mode. If its not turned off, + * there could be battery damage. So, use this mode at your own risk. + */ + switch (val->intval) { + case POWER_SUPPLY_CHARGE_TYPE_NONE: + chg_config = 0x0; + break; + case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: + chg_config = 0x1; + force_20pct = 0x1; + en_term = 0x0; + break; + case POWER_SUPPLY_CHARGE_TYPE_FAST: + chg_config = 0x1; + force_20pct = 0x0; + en_term = 0x1; + break; + default: + return -EINVAL; + } + + if (chg_config) { /* Enabling the charger */ + ret = bq24190_write_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, + force_20pct); + if (ret < 0) + return ret; + + ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC, + BQ24190_REG_CTTC_EN_TERM_MASK, + BQ24190_REG_CTTC_EN_TERM_SHIFT, + en_term); + if (ret < 0) + return ret; + } + + return bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config); +} + +static int bq24190_charger_get_health(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int health, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->charger_health_valid) { + v = bdi->f_reg; + bdi->charger_health_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &v); + if (ret < 0) + return ret; + } + + if (v & BQ24190_REG_F_BOOST_FAULT_MASK) { + /* + * This could be over-current or over-voltage but there's + * no way to tell which. Return 'OVERVOLTAGE' since there + * isn't an 'OVERCURRENT' value defined that we can return + * even if it was over-current. + */ + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else { + v &= BQ24190_REG_F_CHRG_FAULT_MASK; + v >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; + + switch (v) { + case 0x0: /* Normal */ + health = POWER_SUPPLY_HEALTH_GOOD; + break; + case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */ + /* + * This could be over-voltage or under-voltage + * and there's no way to tell which. Instead + * of looking foolish and returning 'OVERVOLTAGE' + * when its really under-voltage, just return + * 'UNSPEC_FAILURE'. + */ + health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + case 0x2: /* Thermal Shutdown */ + health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + case 0x3: /* Charge Safety Timer Expiration */ + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + break; + default: + health = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } + + val->intval = health; + + return 0; +} + +static int bq24190_charger_get_online(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_SS, + BQ24190_REG_SS_PG_STAT_MASK, + BQ24190_REG_SS_PG_STAT_SHIFT, &v); + if (ret < 0) + return ret; + + val->intval = v; + return 0; +} + +static int bq24190_charger_get_current(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int curr, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, + bq24190_ccc_ichg_values, + ARRAY_SIZE(bq24190_ccc_ichg_values), &curr); + if (ret < 0) + return ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); + if (ret < 0) + return ret; + + /* If FORCE_20PCT is enabled, then current is 20% of ICHG value */ + if (v) + curr /= 5; + + val->intval = curr; + return 0; +} + +static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1; + + val->intval = bq24190_ccc_ichg_values[idx]; + return 0; +} + +static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + u8 v; + int ret, curr = val->intval; + + ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_FORCE_20PCT_MASK, + BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); + if (ret < 0) + return ret; + + /* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */ + if (v) + curr *= 5; + + return bq24190_set_field_val(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, + bq24190_ccc_ichg_values, + ARRAY_SIZE(bq24190_ccc_ichg_values), curr); +} + +static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int voltage, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC, + BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, + bq24190_cvc_vreg_values, + ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage); + if (ret < 0) + return ret; + + val->intval = voltage; + return 0; +} + +static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; + + val->intval = bq24190_cvc_vreg_values[idx]; + return 0; +} + +static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_set_field_val(bdi, BQ24190_REG_CVC, + BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, + bq24190_cvc_vreg_values, + ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval); +} + +static int bq24190_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = bq24190_charger_get_charge_type(bdi, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq24190_charger_get_health(bdi, val); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_charger_get_online(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq24190_charger_get_current(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + ret = bq24190_charger_get_current_max(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq24190_charger_get_voltage(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + ret = bq24190_charger_get_voltage_max(bdi, val); + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + ret = 0; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = bdi->model_name; + ret = 0; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = BQ24190_MANUFACTURER; + ret = 0; + break; + default: + ret = -ENODATA; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_charger_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, charger); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = bq24190_charger_set_charge_type(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq24190_charger_set_current(bdi, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq24190_charger_set_voltage(bdi, val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property bq24190_charger_properties[] = { + POWER_SUPPLY_PROP_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static char *bq24190_charger_supplied_to[] = { + "main-battery", +}; + +static void bq24190_charger_init(struct power_supply *charger) +{ + charger->name = "bq24190-charger"; + charger->type = POWER_SUPPLY_TYPE_USB; + charger->properties = bq24190_charger_properties; + charger->num_properties = ARRAY_SIZE(bq24190_charger_properties); + charger->supplied_to = bq24190_charger_supplied_to; + charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to); + charger->get_property = bq24190_charger_get_property; + charger->set_property = bq24190_charger_set_property; + charger->property_is_writeable = bq24190_charger_property_is_writeable; +} + +/* Battery power supply property routines */ + +static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 ss_reg, chrg_fault; + int status, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->battery_status_valid) { + chrg_fault = bdi->f_reg; + bdi->battery_status_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault); + if (ret < 0) + return ret; + } + + chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK; + chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; + + ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); + if (ret < 0) + return ret; + + /* + * The battery must be discharging when any of these are true: + * - there is no good power source; + * - there is a charge fault. + * Could also be discharging when in "supplement mode" but + * there is no way to tell when its in that mode. + */ + if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) { + status = POWER_SUPPLY_STATUS_DISCHARGING; + } else { + ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK; + ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT; + + switch (ss_reg) { + case 0x0: /* Not Charging */ + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case 0x1: /* Pre-charge */ + case 0x2: /* Fast Charging */ + status = POWER_SUPPLY_STATUS_CHARGING; + break; + case 0x3: /* Charge Termination Done */ + status = POWER_SUPPLY_STATUS_FULL; + break; + default: + ret = -EIO; + } + } + + if (!ret) + val->intval = status; + + return ret; +} + +static int bq24190_battery_get_health(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 v; + int health, ret; + + mutex_lock(&bdi->f_reg_lock); + + if (bdi->battery_health_valid) { + v = bdi->f_reg; + bdi->battery_health_valid = false; + mutex_unlock(&bdi->f_reg_lock); + } else { + mutex_unlock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &v); + if (ret < 0) + return ret; + } + + if (v & BQ24190_REG_F_BAT_FAULT_MASK) { + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else { + v &= BQ24190_REG_F_NTC_FAULT_MASK; + v >>= BQ24190_REG_F_NTC_FAULT_SHIFT; + + switch (v) { + case 0x0: /* Normal */ + health = POWER_SUPPLY_HEALTH_GOOD; + break; + case 0x1: /* TS1 Cold */ + case 0x3: /* TS2 Cold */ + case 0x5: /* Both Cold */ + health = POWER_SUPPLY_HEALTH_COLD; + break; + case 0x2: /* TS1 Hot */ + case 0x4: /* TS2 Hot */ + case 0x6: /* Both Hot */ + health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + default: + health = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } + + val->intval = health; + return 0; +} + +static int bq24190_battery_get_online(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + u8 batfet_disable; + int ret; + + ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, + BQ24190_REG_MOC_BATFET_DISABLE_MASK, + BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); + if (ret < 0) + return ret; + + val->intval = !batfet_disable; + return 0; +} + +static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_write_mask(bdi, BQ24190_REG_MOC, + BQ24190_REG_MOC_BATFET_DISABLE_MASK, + BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval); +} + +static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, + union power_supply_propval *val) +{ + int temp, ret; + + ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC, + BQ24190_REG_ICTRC_TREG_MASK, + BQ24190_REG_ICTRC_TREG_SHIFT, + bq24190_ictrc_treg_values, + ARRAY_SIZE(bq24190_ictrc_treg_values), &temp); + if (ret < 0) + return ret; + + val->intval = temp; + return 0; +} + +static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, + const union power_supply_propval *val) +{ + return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC, + BQ24190_REG_ICTRC_TREG_MASK, + BQ24190_REG_ICTRC_TREG_SHIFT, + bq24190_ictrc_treg_values, + ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval); +} + +static int bq24190_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, battery); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_get_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = bq24190_battery_get_status(bdi, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq24190_battery_get_health(bdi, val); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_battery_get_online(bdi, val); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + /* Could be Li-on or Li-polymer but no way to tell which */ + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + ret = 0; + break; + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = bq24190_battery_get_temp_alert_max(bdi, val); + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + ret = 0; + break; + default: + ret = -ENODATA; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_battery_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct bq24190_dev_info *bdi = + container_of(psy, struct bq24190_dev_info, battery); + int ret; + + dev_dbg(bdi->dev, "prop: %d\n", psp); + + pm_runtime_put_sync(bdi->dev); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = bq24190_battery_set_online(bdi, val); + break; + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = bq24190_battery_set_temp_alert_max(bdi, val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put_sync(bdi->dev); + return ret; +} + +static int bq24190_battery_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property bq24190_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_TEMP_ALERT_MAX, + POWER_SUPPLY_PROP_SCOPE, +}; + +static void bq24190_battery_init(struct power_supply *battery) +{ + battery->name = "bq24190-battery"; + battery->type = POWER_SUPPLY_TYPE_BATTERY; + battery->properties = bq24190_battery_properties; + battery->num_properties = ARRAY_SIZE(bq24190_battery_properties); + battery->get_property = bq24190_battery_get_property; + battery->set_property = bq24190_battery_set_property; + battery->property_is_writeable = bq24190_battery_property_is_writeable; +} + +static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) +{ + struct bq24190_dev_info *bdi = data; + bool alert_userspace = false; + u8 ss_reg, f_reg; + int ret; + + pm_runtime_get_sync(bdi->dev); + + ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); + if (ret < 0) { + dev_err(bdi->dev, "Can't read SS reg: %d\n", ret); + goto out; + } + + if (ss_reg != bdi->ss_reg) { + /* + * The device is in host mode so when PG_STAT goes from 1->0 + * (i.e., power removed) HIZ needs to be disabled. + */ + if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) && + !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) { + ret = bq24190_write_mask(bdi, BQ24190_REG_ISC, + BQ24190_REG_ISC_EN_HIZ_MASK, + BQ24190_REG_ISC_EN_HIZ_SHIFT, + 0); + if (ret < 0) + dev_err(bdi->dev, "Can't access ISC reg: %d\n", + ret); + } + + bdi->ss_reg = ss_reg; + alert_userspace = true; + } + + mutex_lock(&bdi->f_reg_lock); + + ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); + if (ret < 0) { + mutex_unlock(&bdi->f_reg_lock); + dev_err(bdi->dev, "Can't read F reg: %d\n", ret); + goto out; + } + + if (f_reg != bdi->f_reg) { + bdi->f_reg = f_reg; + bdi->charger_health_valid = true; + bdi->battery_health_valid = true; + bdi->battery_status_valid = true; + + alert_userspace = true; + } + + mutex_unlock(&bdi->f_reg_lock); + + /* + * Sometimes bq24190 gives a steady trickle of interrupts even + * though the watchdog timer is turned off and neither the STATUS + * nor FAULT registers have changed. Weed out these sprurious + * interrupts so userspace isn't alerted for no reason. + * In addition, the chip always generates an interrupt after + * register reset so we should ignore that one (the very first + * interrupt received). + */ + if (alert_userspace && !bdi->first_time) { + power_supply_changed(&bdi->charger); + power_supply_changed(&bdi->battery); + bdi->first_time = false; + } + +out: + pm_runtime_put_sync(bdi->dev); + + dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg); + + return IRQ_HANDLED; +} + +static int bq24190_hw_init(struct bq24190_dev_info *bdi) +{ + u8 v; + int ret; + + pm_runtime_get_sync(bdi->dev); + + /* First check that the device really is what its supposed to be */ + ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, + BQ24190_REG_VPRS_PN_MASK, + BQ24190_REG_VPRS_PN_SHIFT, + &v); + if (ret < 0) + goto out; + + if (v != bdi->model) { + ret = -ENODEV; + goto out; + } + + ret = bq24190_register_reset(bdi); + if (ret < 0) + goto out; + + ret = bq24190_set_mode_host(bdi); +out: + pm_runtime_put_sync(bdi->dev); + return ret; +} + +#ifdef CONFIG_OF +static int bq24190_setup_dt(struct bq24190_dev_info *bdi) +{ + bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0); + if (bdi->irq <= 0) + return -1; + + return 0; +} +#else +static int bq24190_setup_dt(struct bq24190_dev_info *bdi) +{ + return -1; +} +#endif + +static int bq24190_setup_pdata(struct bq24190_dev_info *bdi, + struct bq24190_platform_data *pdata) +{ + int ret; + + if (!gpio_is_valid(pdata->gpio_int)) + return -1; + + ret = gpio_request(pdata->gpio_int, dev_name(bdi->dev)); + if (ret < 0) + return -1; + + ret = gpio_direction_input(pdata->gpio_int); + if (ret < 0) + goto out; + + bdi->irq = gpio_to_irq(pdata->gpio_int); + if (!bdi->irq) + goto out; + + bdi->gpio_int = pdata->gpio_int; + return 0; + +out: + gpio_free(pdata->gpio_int); + return -1; +} + +static int bq24190_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct device *dev = &client->dev; + struct bq24190_platform_data *pdata = client->dev.platform_data; + struct bq24190_dev_info *bdi; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); + return -ENODEV; + } + + bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL); + if (!bdi) { + dev_err(dev, "Can't alloc bdi struct\n"); + return -ENOMEM; + } + + bdi->client = client; + bdi->dev = dev; + bdi->model = id->driver_data; + strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); + mutex_init(&bdi->f_reg_lock); + bdi->first_time = true; + bdi->charger_health_valid = false; + bdi->battery_health_valid = false; + bdi->battery_status_valid = false; + + i2c_set_clientdata(client, bdi); + + if (dev->of_node) + ret = bq24190_setup_dt(bdi); + else + ret = bq24190_setup_pdata(bdi, pdata); + + if (ret) { + dev_err(dev, "Can't get irq info\n"); + return -EINVAL; + } + + ret = devm_request_threaded_irq(dev, bdi->irq, NULL, + bq24190_irq_handler_thread, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "bq24190-charger", bdi); + if (ret < 0) { + dev_err(dev, "Can't set up irq handler\n"); + goto out1; + } + + pm_runtime_enable(dev); + pm_runtime_resume(dev); + + ret = bq24190_hw_init(bdi); + if (ret < 0) { + dev_err(dev, "Hardware init failed\n"); + goto out2; + } + + bq24190_charger_init(&bdi->charger); + + ret = power_supply_register(dev, &bdi->charger); + if (ret) { + dev_err(dev, "Can't register charger\n"); + goto out2; + } + + bq24190_battery_init(&bdi->battery); + + ret = power_supply_register(dev, &bdi->battery); + if (ret) { + dev_err(dev, "Can't register battery\n"); + goto out3; + } + + ret = bq24190_sysfs_create_group(bdi); + if (ret) { + dev_err(dev, "Can't create sysfs entries\n"); + goto out4; + } + + return 0; + +out4: + power_supply_unregister(&bdi->battery); +out3: + power_supply_unregister(&bdi->charger); +out2: + pm_runtime_disable(dev); +out1: + if (bdi->gpio_int) + gpio_free(bdi->gpio_int); + + return ret; +} + +static int bq24190_remove(struct i2c_client *client) +{ + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + bq24190_sysfs_remove_group(bdi); + power_supply_unregister(&bdi->battery); + power_supply_unregister(&bdi->charger); + pm_runtime_disable(bdi->dev); + + if (bdi->gpio_int) + gpio_free(bdi->gpio_int); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bq24190_pm_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + return 0; +} + +static int bq24190_pm_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + bdi->charger_health_valid = false; + bdi->battery_health_valid = false; + bdi->battery_status_valid = false; + + pm_runtime_get_sync(bdi->dev); + bq24190_register_reset(bdi); + pm_runtime_put_sync(bdi->dev); + + /* Things may have changed while suspended so alert upper layer */ + power_supply_changed(&bdi->charger); + power_supply_changed(&bdi->battery); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(bq24190_pm_ops, bq24190_pm_suspend, bq24190_pm_resume); + +/* + * Only support the bq24190 right now. The bq24192, bq24192i, and bq24193 + * are similar but not identical so the driver needs to be extended to + * support them. + */ +static const struct i2c_device_id bq24190_i2c_ids[] = { + { "bq24190", BQ24190_REG_VPRS_PN_24190 }, + { }, +}; + +#ifdef CONFIG_OF +static const struct of_device_id bq24190_of_match[] = { + { .compatible = "ti,bq24190", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bq24190_of_match); +#else +static const struct of_device_id bq24190_of_match[] = { + { }, +}; +#endif + +static struct i2c_driver bq24190_driver = { + .probe = bq24190_probe, + .remove = bq24190_remove, + .id_table = bq24190_i2c_ids, + .driver = { + .name = "bq24190-charger", + .owner = THIS_MODULE, + .pm = &bq24190_pm_ops, + .of_match_table = of_match_ptr(bq24190_of_match), + }, +}; +module_i2c_driver(bq24190_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>"); +MODULE_ALIAS("i2c:bq24190-charger"); +MODULE_DESCRIPTION("TI BQ24190 Charger Driver"); |
