diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-abx500.h')
-rw-r--r-- | drivers/pinctrl/pinctrl-abx500.h | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h new file mode 100644 index 000000000000..436ace356175 --- /dev/null +++ b/drivers/pinctrl/pinctrl-abx500.h @@ -0,0 +1,180 @@ +#ifndef PINCTRL_PINCTRL_ABx5O0_H +#define PINCTRL_PINCTRL_ABx500_H + +/* Package definitions */ +#define PINCTRL_AB8500 0 +#define PINCTRL_AB8540 1 +#define PINCTRL_AB9540 2 +#define PINCTRL_AB8505 3 + +/* pins alternate function */ +enum abx500_pin_func { + ABX500_DEFAULT, + ABX500_ALT_A, + ABX500_ALT_B, + ABX500_ALT_C, +}; + +/** + * struct abx500_function - ABx500 pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct abx500_function { + const char *name; + const char * const *groups; + unsigned ngroups; +}; + +/** + * struct abx500_pingroup - describes a ABx500 pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @num_pins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + * @altsetting: the altsetting to apply to all pins in this group to + * configure them to be used by a function + */ +struct abx500_pingroup { + const char *name; + const unsigned int *pins; + const unsigned npins; + int altsetting; +}; + +#define ALTERNATE_FUNCTIONS(pin, sel_bit, alt1, alt2, alta, altb, altc) \ +{ \ + .pin_number = pin, \ + .gpiosel_bit = sel_bit, \ + .alt_bit1 = alt1, \ + .alt_bit2 = alt2, \ + .alta_val = alta, \ + .altb_val = altb, \ + .altc_val = altc, \ +} + +#define UNUSED -1 +/** + * struct alternate_functions + * @pin_number: The pin number + * @gpiosel_bit: Control bit in GPIOSEL register, + * @alt_bit1: First AlternateFunction bit used to select the + * alternate function + * @alt_bit2: Second AlternateFunction bit used to select the + * alternate function + * + * these 3 following fields are necessary due to none + * coherency on how to select the altA, altB and altC + * function between the ABx500 SOC family when using + * alternatfunc register. + * @alta_val: value to write in alternatfunc to select altA function + * @altb_val: value to write in alternatfunc to select altB function + * @altc_val: value to write in alternatfunc to select altC function + */ +struct alternate_functions { + unsigned pin_number; + s8 gpiosel_bit; + s8 alt_bit1; + s8 alt_bit2; + u8 alta_val; + u8 altb_val; + u8 altc_val; +}; + +/** + * struct pullud - specific pull up/down feature + * @first_pin: The pin number of the first pins which support + * specific pull up/down + * @last_pin: The pin number of the last pins + */ +struct pullud { + unsigned first_pin; + unsigned last_pin; +}; + +#define GPIO_IRQ_CLUSTER(a, b, c) \ +{ \ + .start = a, \ + .end = b, \ + .offset = c, \ +} + +/** + * struct abx500_gpio_irq_cluster - indicates GPIOs which are interrupt + * capable + * @start: The pin number of the first pin interrupt capable + * @end: The pin number of the last pin interrupt capable + * @offset: offset used to compute specific setting strategy of + * the interrupt line + */ + +struct abx500_gpio_irq_cluster { + int start; + int end; + int offset; +}; + +/** + * struct abx500_pinrange - map pin numbers to GPIO offsets + * @offset: offset into the GPIO local numberspace, incidentally + * identical to the offset into the local pin numberspace + * @npins: number of pins to map from both offsets + * @altfunc: altfunc setting to be used to enable GPIO on a pin in + * this range (may vary) + */ +struct abx500_pinrange { + unsigned int offset; + unsigned int npins; + int altfunc; +}; + +#define ABX500_PINRANGE(a, b, c) { .offset = a, .npins = b, .altfunc = c } + +/** + * struct abx500_pinctrl_soc_data - ABx500 pin controller per-SoC configuration + * @gpio_ranges: An array of GPIO ranges for this SoC + * @gpio_num_ranges: The number of GPIO ranges for this SoC + * @pins: An array describing all pins the pin controller affects. + * All pins which are also GPIOs must be listed first within the + * array, and be numbered identically to the GPIO controller's + * numbering. + * @npins: The number of entries in @pins. + * @functions: The functions supported on this SoC. + * @nfunction: The number of entries in @functions. + * @groups: An array describing all pin groups the pin SoC supports. + * @ngroups: The number of entries in @groups. + * @alternate_functions: array describing pins which supports alternate and + * how to set it. + * @pullud: array describing pins which supports pull up/down + * specific registers. + * @gpio_irq_cluster: An array of GPIO interrupt capable for this SoC + * @ngpio_irq_cluster: The number of GPIO inetrrupt capable for this SoC + * @irq_gpio_rising_offset: Interrupt offset used as base to compute specific + * setting strategy of the rising interrupt line + * @irq_gpio_falling_offset: Interrupt offset used as base to compute specific + * setting strategy of the falling interrupt line + * @irq_gpio_factor: Factor used to compute specific setting strategy of + * the interrupt line + */ + +struct abx500_pinctrl_soc_data { + const struct abx500_pinrange *gpio_ranges; + unsigned gpio_num_ranges; + const struct pinctrl_pin_desc *pins; + unsigned npins; + const struct abx500_function *functions; + unsigned nfunctions; + const struct abx500_pingroup *groups; + unsigned ngroups; + struct alternate_functions *alternate_functions; + struct pullud *pullud; + struct abx500_gpio_irq_cluster *gpio_irq_cluster; + unsigned ngpio_irq_cluster; + int irq_gpio_rising_offset; + int irq_gpio_falling_offset; + int irq_gpio_factor; +}; + +#endif /* PINCTRL_PINCTRL_ABx500_H */ |