diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/Kconfig | 54 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 9 | ||||
| -rw-r--r-- | drivers/phy/phy-core.c | 698 | ||||
| -rw-r--r-- | drivers/phy/phy-exynos-dp-video.c | 111 | ||||
| -rw-r--r-- | drivers/phy/phy-exynos-mipi-video.c | 176 | ||||
| -rw-r--r-- | drivers/phy/phy-omap-usb2.c | 324 | ||||
| -rw-r--r-- | drivers/phy/phy-twl4030-usb.c | 815 |
7 files changed, 2187 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig new file mode 100644 index 000000000000..a344f3d52361 --- /dev/null +++ b/drivers/phy/Kconfig @@ -0,0 +1,54 @@ +# +# PHY +# + +menu "PHY Subsystem" + +config GENERIC_PHY + tristate "PHY Core" + help + Generic PHY support. + + This framework is designed to provide a generic interface for PHY + devices present in the kernel. This layer will have the generic + API by which phy drivers can create PHY using the phy framework and + phy users can obtain reference to the PHY. All the users of this + framework should select this config. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and EXYNOS SoCs. + +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS + select GENERIC_PHY + select USB_PHY + select OMAP_CONTROL_USB + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series Display Port PHY driver" + depends on OF + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung EXYNOS SoCs. + +endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile new file mode 100644 index 000000000000..d0caae9cfb83 --- /dev/null +++ b/drivers/phy/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the phy drivers. +# + +obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c new file mode 100644 index 000000000000..03cf8fb81554 --- /dev/null +++ b/drivers/phy/phy-core.c @@ -0,0 +1,698 @@ +/* + * phy-core.c -- Generic Phy framework. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/idr.h> +#include <linux/pm_runtime.h> + +static struct class *phy_class; +static DEFINE_MUTEX(phy_provider_mutex); +static LIST_HEAD(phy_provider_list); +static DEFINE_IDA(phy_ida); + +static void devm_phy_release(struct device *dev, void *res) +{ + struct phy *phy = *(struct phy **)res; + + phy_put(phy); +} + +static void devm_phy_provider_release(struct device *dev, void *res) +{ + struct phy_provider *phy_provider = *(struct phy_provider **)res; + + of_phy_provider_unregister(phy_provider); +} + +static void devm_phy_consume(struct device *dev, void *res) +{ + struct phy *phy = *(struct phy **)res; + + phy_destroy(phy); +} + +static int devm_phy_match(struct device *dev, void *res, void *match_data) +{ + return res == match_data; +} + +static struct phy *phy_lookup(struct device *device, const char *port) +{ + unsigned int count; + struct phy *phy; + struct device *dev; + struct phy_consumer *consumers; + struct class_dev_iter iter; + + class_dev_iter_init(&iter, phy_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + phy = to_phy(dev); + count = phy->init_data->num_consumers; + consumers = phy->init_data->consumers; + while (count--) { + if (!strcmp(consumers->dev_name, dev_name(device)) && + !strcmp(consumers->port, port)) { + class_dev_iter_exit(&iter); + return phy; + } + consumers++; + } + } + + class_dev_iter_exit(&iter); + return ERR_PTR(-ENODEV); +} + +static struct phy_provider *of_phy_provider_lookup(struct device_node *node) +{ + struct phy_provider *phy_provider; + + list_for_each_entry(phy_provider, &phy_provider_list, list) { + if (phy_provider->dev->of_node == node) + return phy_provider; + } + + return ERR_PTR(-EPROBE_DEFER); +} + +int phy_pm_runtime_get(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_get(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_get); + +int phy_pm_runtime_get_sync(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_get_sync(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync); + +int phy_pm_runtime_put(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_put(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_put); + +int phy_pm_runtime_put_sync(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_put_sync(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_put_sync); + +void phy_pm_runtime_allow(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return; + + pm_runtime_allow(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_allow); + +void phy_pm_runtime_forbid(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return; + + pm_runtime_forbid(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_forbid); + +int phy_init(struct phy *phy) +{ + int ret; + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + + mutex_lock(&phy->mutex); + if (phy->init_count++ == 0 && phy->ops->init) { + ret = phy->ops->init(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy init failed --> %d\n", ret); + goto out; + } + } + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + return ret; +} +EXPORT_SYMBOL_GPL(phy_init); + +int phy_exit(struct phy *phy) +{ + int ret; + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + + mutex_lock(&phy->mutex); + if (--phy->init_count == 0 && phy->ops->exit) { + ret = phy->ops->exit(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy exit failed --> %d\n", ret); + goto out; + } + } + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + return ret; +} +EXPORT_SYMBOL_GPL(phy_exit); + +int phy_power_on(struct phy *phy) +{ + int ret = -ENOTSUPP; + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + + mutex_lock(&phy->mutex); + if (phy->power_count++ == 0 && phy->ops->power_on) { + ret = phy->ops->power_on(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy poweron failed --> %d\n", ret); + goto out; + } + } + +out: + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_power_on); + +int phy_power_off(struct phy *phy) +{ + int ret = -ENOTSUPP; + + mutex_lock(&phy->mutex); + if (--phy->power_count == 0 && phy->ops->power_off) { + ret = phy->ops->power_off(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy poweroff failed --> %d\n", ret); + goto out; + } + } + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_power_off); + +/** + * of_phy_get() - lookup and obtain a reference to a phy by phandle + * @dev: device that requests this phy + * @index: the index of the phy + * + * Returns the phy associated with the given phandle value, + * after getting a refcount to it or -ENODEV if there is no such phy or + * -EPROBE_DEFER if there is a phandle to the phy, but the device is + * not yet loaded. This function uses of_xlate call back function provided + * while registering the phy_provider to find the phy instance. + */ +static struct phy *of_phy_get(struct device *dev, int index) +{ + int ret; + struct phy_provider *phy_provider; + struct phy *phy = NULL; + struct of_phandle_args args; + + ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", + index, &args); + if (ret) { + dev_dbg(dev, "failed to get phy in %s node\n", + dev->of_node->full_name); + return ERR_PTR(-ENODEV); + } + + mutex_lock(&phy_provider_mutex); + phy_provider = of_phy_provider_lookup(args.np); + if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) { + phy = ERR_PTR(-EPROBE_DEFER); + goto err0; + } + + phy = phy_provider->of_xlate(phy_provider->dev, &args); + module_put(phy_provider->owner); + +err0: + mutex_unlock(&phy_provider_mutex); + of_node_put(args.np); + + return phy; +} + +/** + * phy_put() - release the PHY + * @phy: the phy returned by phy_get() + * + * Releases a refcount the caller received from phy_get(). + */ +void phy_put(struct phy *phy) +{ + if (IS_ERR(phy)) + return; + + module_put(phy->ops->owner); + put_device(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_put); + +/** + * devm_phy_put() - release the PHY + * @dev: device that wants to release this phy + * @phy: the phy returned by devm_phy_get() + * + * destroys the devres associated with this phy and invokes phy_put + * to release the phy. + */ +void devm_phy_put(struct device *dev, struct phy *phy) +{ + int r; + + r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy); + dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); +} +EXPORT_SYMBOL_GPL(devm_phy_put); + +/** + * of_phy_simple_xlate() - returns the phy instance from phy provider + * @dev: the PHY provider device + * @args: of_phandle_args (not used here) + * + * Intended to be used by phy provider for the common case where #phy-cells is + * 0. For other cases where #phy-cells is greater than '0', the phy provider + * should provide a custom of_xlate function that reads the *args* and returns + * the appropriate phy. + */ +struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args + *args) +{ + struct phy *phy; + struct class_dev_iter iter; + struct device_node *node = dev->of_node; + + class_dev_iter_init(&iter, phy_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + phy = to_phy(dev); + if (node != phy->dev.of_node) + continue; + + class_dev_iter_exit(&iter); + return phy; + } + + class_dev_iter_exit(&iter); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(of_phy_simple_xlate); + +/** + * phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or the name of the controller + * port for non-dt case + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *phy_get(struct device *dev, const char *string) +{ + int index = 0; + struct phy *phy = NULL; + + if (string == NULL) { + dev_WARN(dev, "missing string\n"); + return ERR_PTR(-EINVAL); + } + + if (dev->of_node) { + index = of_property_match_string(dev->of_node, "phy-names", + string); + phy = of_phy_get(dev, index); + if (IS_ERR(phy)) { + dev_err(dev, "unable to find phy\n"); + return phy; + } + } else { + phy = phy_lookup(dev, string); + if (IS_ERR(phy)) { + dev_err(dev, "unable to find phy\n"); + return phy; + } + } + + if (!try_module_get(phy->ops->owner)) + return ERR_PTR(-EPROBE_DEFER); + + get_device(&phy->dev); + + return phy; +} +EXPORT_SYMBOL_GPL(phy_get); + +/** + * devm_phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or phy device name + * for non-dt case + * + * Gets the phy using phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_phy_get(struct device *dev, const char *string) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = phy_get(dev, string); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_get); + +/** + * phy_create() - create a new phy + * @dev: device that is creating the new phy + * @ops: function pointers for performing phy operations + * @init_data: contains the list of PHY consumers or NULL + * + * Called to create a phy using phy framework. + */ +struct phy *phy_create(struct device *dev, const struct phy_ops *ops, + struct phy_init_data *init_data) +{ + int ret; + int id; + struct phy *phy; + + if (!dev) { + dev_WARN(dev, "no device provided for PHY\n"); + ret = -EINVAL; + goto err0; + } + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + ret = -ENOMEM; + goto err0; + } + + id = ida_simple_get(&phy_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + dev_err(dev, "unable to get id\n"); + ret = id; + goto err0; + } + + device_initialize(&phy->dev); + mutex_init(&phy->mutex); + + phy->dev.class = phy_class; + phy->dev.parent = dev; + phy->dev.of_node = dev->of_node; + phy->id = id; + phy->ops = ops; + phy->init_data = init_data; + + ret = dev_set_name(&phy->dev, "phy-%s.%d", dev_name(dev), id); + if (ret) + goto err1; + + ret = device_add(&phy->dev); + if (ret) + goto err1; + + if (pm_runtime_enabled(dev)) { + pm_runtime_enable(&phy->dev); + pm_runtime_no_callbacks(&phy->dev); + } + + return phy; + +err1: + ida_remove(&phy_ida, phy->id); + put_device(&phy->dev); + kfree(phy); + +err0: + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(phy_create); + +/** + * devm_phy_create() - create a new phy + * @dev: device that is creating the new phy + * @ops: function pointers for performing phy operations + * @init_data: contains the list of PHY consumers or NULL + * + * Creates a new PHY device adding it to the PHY class. + * While at that, it also associates the device with the phy using devres. + * On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops, + struct phy_init_data *init_data) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_consume, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = phy_create(dev, ops, init_data); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_create); + +/** + * phy_destroy() - destroy the phy + * @phy: the phy to be destroyed + * + * Called to destroy the phy. + */ +void phy_destroy(struct phy *phy) +{ + pm_runtime_disable(&phy->dev); + device_unregister(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_destroy); + +/** + * devm_phy_destroy() - destroy the PHY + * @dev: device that wants to release this phy + * @phy: the phy returned by devm_phy_get() + * + * destroys the devres associated with this phy and invokes phy_destroy + * to destroy the phy. + */ +void devm_phy_destroy(struct device *dev, struct phy *phy) +{ + int r; + + r = devres_destroy(dev, devm_phy_consume, devm_phy_match, phy); + dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); +} +EXPORT_SYMBOL_GPL(devm_phy_destroy); + +/** + * __of_phy_provider_register() - create/register phy provider with the framework + * @dev: struct device of the phy provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain phy instance from phy provider + * + * Creates struct phy_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the phy instance from + * phy provider. + */ +struct phy_provider *__of_phy_provider_register(struct device *dev, + struct module *owner, struct phy * (*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct phy_provider *phy_provider; + + phy_provider = kzalloc(sizeof(*phy_provider), GFP_KERNEL); + if (!phy_provider) + return ERR_PTR(-ENOMEM); + + phy_provider->dev = dev; + phy_provider->owner = owner; + phy_provider->of_xlate = of_xlate; + + mutex_lock(&phy_provider_mutex); + list_add_tail(&phy_provider->list, &phy_provider_list); + mutex_unlock(&phy_provider_mutex); + + return phy_provider; +} +EXPORT_SYMBOL_GPL(__of_phy_provider_register); + +/** + * __devm_of_phy_provider_register() - create/register phy provider with the + * framework + * @dev: struct device of the phy provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain phy instance from phy provider + * + * Creates struct phy_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the phy instance from + * phy provider. While at that, it also associates the device with the + * phy provider using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + */ +struct phy_provider *__devm_of_phy_provider_register(struct device *dev, + struct module *owner, struct phy * (*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct phy_provider **ptr, *phy_provider; + + ptr = devres_alloc(devm_phy_provider_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy_provider = __of_phy_provider_register(dev, owner, of_xlate); + if (!IS_ERR(phy_provider)) { + *ptr = phy_provider; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy_provider; +} +EXPORT_SYMBOL_GPL(__devm_of_phy_provider_register); + +/** + * of_phy_provider_unregister() - unregister phy provider from the framework + * @phy_provider: phy provider returned by of_phy_provider_register() + * + * Removes the phy_provider created using of_phy_provider_register(). + */ +void of_phy_provider_unregister(struct phy_provider *phy_provider) +{ + if (IS_ERR(phy_provider)) + return; + + mutex_lock(&phy_provider_mutex); + list_del(&phy_provider->list); + kfree(phy_provider); + mutex_unlock(&phy_provider_mutex); +} +EXPORT_SYMBOL_GPL(of_phy_provider_unregister); + +/** + * devm_of_phy_provider_unregister() - remove phy provider from the framework + * @dev: struct device of the phy provider + * + * destroys the devres associated with this phy provider and invokes + * of_phy_provider_unregister to unregister the phy provider. + */ +void devm_of_phy_provider_unregister(struct device *dev, + struct phy_provider *phy_provider) { + int r; + + r = devres_destroy(dev, devm_phy_provider_release, devm_phy_match, + phy_provider); + dev_WARN_ONCE(dev, r, "couldn't find PHY provider device resource\n"); +} +EXPORT_SYMBOL_GPL(devm_of_phy_provider_unregister); + +/** + * phy_release() - release the phy + * @dev: the dev member within phy + * + * When the last reference to the device is removed, it is called + * from the embedded kobject as release method. + */ +static void phy_release(struct device *dev) +{ + struct phy *phy; + + phy = to_phy(dev); + dev_vdbg(dev, "releasing '%s'\n", dev_name(dev)); + ida_remove(&phy_ida, phy->id); + kfree(phy); +} + +static int __init phy_core_init(void) +{ + phy_class = class_create(THIS_MODULE, "phy"); + if (IS_ERR(phy_class)) { + pr_err("failed to create phy class --> %ld\n", + PTR_ERR(phy_class)); + return PTR_ERR(phy_class); + } + + phy_class->dev_release = phy_release; + + return 0; +} +module_init(phy_core_init); + +static void __exit phy_core_exit(void) +{ + class_destroy(phy_class); +} +module_exit(phy_core_exit); + +MODULE_DESCRIPTION("Generic PHY Framework"); +MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c new file mode 100644 index 000000000000..1dbe6ce7b2ce --- /dev/null +++ b/drivers/phy/phy-exynos-dp-video.c @@ -0,0 +1,111 @@ +/* + * Samsung EXYNOS SoC series Display Port PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* DPTX_PHY_CONTROL register */ +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) + +struct exynos_dp_video_phy { + void __iomem *regs; +}; + +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) +{ + u32 reg; + + reg = readl(state->regs); + if (on) + reg |= EXYNOS_DPTX_PHY_ENABLE; + else + reg &= ~EXYNOS_DPTX_PHY_ENABLE; + writel(reg, state->regs); + + return 0; +} + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 1); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 0); +} + +static struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *phy; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + phy = devm_phy_create(dev, &exynos_dp_video_phy_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, state); + + return 0; +} + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { .compatible = "samsung,exynos5250-dp-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .name = "exynos-dp-video-phy", + .owner = THIS_MODULE, + .of_match_table = exynos_dp_video_phy_of_match, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c new file mode 100644 index 000000000000..0c5efab11af1 --- /dev/null +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -0,0 +1,176 @@ +/* + * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +/* MIPI_PHYn_CONTROL register offset: n = 0..1 */ +#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) +#define EXYNOS_MIPI_PHY_ENABLE (1 << 0) +#define EXYNOS_MIPI_PHY_SRESETN (1 << 1) +#define EXYNOS_MIPI_PHY_MRESETN (1 << 2) +#define EXYNOS_MIPI_PHY_RESET_MASK (3 << 1) + +enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_CSIS0, + EXYNOS_MIPI_PHY_ID_DSIM0, + EXYNOS_MIPI_PHY_ID_CSIS1, + EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHYS_NUM +}; + +#define is_mipi_dsim_phy_id(id) \ + ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) + +struct exynos_mipi_video_phy { + spinlock_t slock; + struct video_phy_desc { + struct phy *phy; + unsigned int index; + } phys[EXYNOS_MIPI_PHYS_NUM]; + void __iomem *regs; +}; + +static int __set_phy_state(struct exynos_mipi_video_phy *state, + enum exynos_mipi_phy_id id, unsigned int on) +{ + void __iomem *addr; + u32 reg, reset; + + addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2); + + if (is_mipi_dsim_phy_id(id)) + reset = EXYNOS_MIPI_PHY_MRESETN; + else + reset = EXYNOS_MIPI_PHY_SRESETN; + + spin_lock(&state->slock); + reg = readl(addr); + if (on) + reg |= reset; + else + reg &= ~reset; + writel(reg, addr); + + /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */ + if (on) + reg |= EXYNOS_MIPI_PHY_ENABLE; + else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK)) + reg &= ~EXYNOS_MIPI_PHY_ENABLE; + + writel(reg, addr); + spin_unlock(&state->slock); + return 0; +} + +#define to_mipi_video_phy(desc) \ + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]); + +static int exynos_mipi_video_phy_power_on(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 1); +} + +static int exynos_mipi_video_phy_power_off(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 0); +} + +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM)) + return ERR_PTR(-ENODEV); + + return state->phys[args->args[0]].phy; +} + +static struct phy_ops exynos_mipi_video_phy_ops = { + .power_on = exynos_mipi_video_phy_power_on, + .power_off = exynos_mipi_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_mipi_video_phy *state; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + unsigned int i; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + dev_set_drvdata(dev, state); + spin_lock_init(&state->slock); + + phy_provider = devm_of_phy_provider_register(dev, + exynos_mipi_video_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, + &exynos_mipi_video_phy_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + state->phys[i].phy = phy; + state->phys[i].index = i; + phy_set_drvdata(phy, &state->phys[i]); + } + + return 0; +} + +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { + { .compatible = "samsung,s5pv210-mipi-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); + +static struct platform_driver exynos_mipi_video_phy_driver = { + .probe = exynos_mipi_video_phy_probe, + .driver = { + .of_match_table = exynos_mipi_video_phy_of_match, + .name = "exynos-mipi-video-phy", + .owner = THIS_MODULE, + } +}; +module_platform_driver(exynos_mipi_video_phy_driver); + +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c new file mode 100644 index 000000000000..bfc5c337f99a --- /dev/null +++ b/drivers/phy/phy-omap-usb2.c @@ -0,0 +1,324 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/usb/omap_usb.h> +#include <linux/usb/phy_companion.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> +#include <linux/usb/omap_control_usb.h> +#include <linux/phy/phy.h> +#include <linux/of_platform.h> + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + + otg->host = host; + if (!host) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct usb_phy *phy = otg->phy; + + otg->gadget = gadget; + if (!gadget) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb2_suspend(struct usb_phy *x, int suspend) +{ + struct omap_usb *phy = phy_to_omapusb(x); + int ret; + + if (suspend && !phy->is_suspended) { + omap_control_usb_phy_power(phy->control_dev, 0); + pm_runtime_put_sync(phy->dev); + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", ret); + return ret; + } + omap_control_usb_phy_power(phy->control_dev, 1); + phy->is_suspended = 0; + } + + return 0; +} + +static int omap_usb_power_off(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + omap_control_usb_phy_power(phy->control_dev, 0); + + return 0; +} + +static int omap_usb_power_on(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + omap_control_usb_phy_power(phy->control_dev, 1); + + return 0; +} + +static struct phy_ops ops = { + .power_on = omap_usb_power_on, + .power_off = omap_usb_power_off, + .owner = THIS_MODULE, +}; + +static int omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct usb_otg *otg; + struct device_node *node = pdev->dev.of_node; + struct device_node *control_node; + struct platform_device *control_pdev; + + if (!node) + return -EINVAL; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb2"; + phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; + + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, "Failed to get control device phandle\n"); + return -EINVAL; + } + + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; + + phy->is_suspended = 1; + omap_control_usb_phy_power(phy->control_dev, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + otg->set_vbus = omap_usb_set_vbus; + otg->start_srp = omap_usb_start_srp; + otg->phy = &phy->phy; + + platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); + + generic_phy = devm_phy_create(phy->dev, &ops, NULL); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) + dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); + else + clk_prepare(phy->optclk); + + usb_add_phy_dev(&phy->phy); + + return 0; +} + +static int omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + int ret; + + ret = clk_enable(phy->wkupclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err0; + } + + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + } + + return 0; + +err1: + clk_disable(phy->wkupclk); + +err0: + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb2_id_table[] = { + { .compatible = "ti,omap-usb2" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = omap_usb2_remove, + .driver = { + .name = "omap-usb2", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb2_id_table), + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform: omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c new file mode 100644 index 000000000000..daf65e68aaab --- /dev/null +++ b/drivers/phy/phy-twl4030-usb.c @@ -0,0 +1,815 @@ +/* + * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * - HS USB ULPI mode works. + * - 3-pin mode support may be added in future. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> +#include <linux/phy/phy.h> +#include <linux/usb/musb-omap.h> +#include <linux/usb/ulpi.h> +#include <linux/i2c/twl.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/slab.h> + +/* Register defines */ + +#define MCPC_CTRL 0x30 +#define MCPC_CTRL_RTSOL (1 << 7) +#define MCPC_CTRL_EXTSWR (1 << 6) +#define MCPC_CTRL_EXTSWC (1 << 5) +#define MCPC_CTRL_VOICESW (1 << 4) +#define MCPC_CTRL_OUT64K (1 << 3) +#define MCPC_CTRL_RTSCTSSW (1 << 2) +#define MCPC_CTRL_HS_UART (1 << 0) + +#define MCPC_IO_CTRL 0x33 +#define MCPC_IO_CTRL_MICBIASEN (1 << 5) +#define MCPC_IO_CTRL_CTS_NPU (1 << 4) +#define MCPC_IO_CTRL_RXD_PU (1 << 3) +#define MCPC_IO_CTRL_TXDTYP (1 << 2) +#define MCPC_IO_CTRL_CTSTYP (1 << 1) +#define MCPC_IO_CTRL_RTSTYP (1 << 0) + +#define MCPC_CTRL2 0x36 +#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) + +#define OTHER_FUNC_CTRL 0x80 +#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) +#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) + +#define OTHER_IFC_CTRL 0x83 +#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) +#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) +#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) +#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) +#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) +#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) + +#define OTHER_INT_EN_RISE 0x86 +#define OTHER_INT_EN_FALL 0x89 +#define OTHER_INT_STS 0x8C +#define OTHER_INT_LATCH 0x8D +#define OTHER_INT_VB_SESS_VLD (1 << 7) +#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ +#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ +#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ +#define OTHER_INT_MANU (1 << 1) +#define OTHER_INT_ABNORMAL_STRESS (1 << 0) + +#define ID_STATUS 0x96 +#define ID_RES_FLOAT (1 << 4) +#define ID_RES_440K (1 << 3) +#define ID_RES_200K (1 << 2) +#define ID_RES_102K (1 << 1) +#define ID_RES_GND (1 << 0) + +#define POWER_CTRL 0xAC +#define POWER_CTRL_OTG_ENAB (1 << 5) + +#define OTHER_IFC_CTRL2 0xAF +#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) +#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) +#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) + +#define REG_CTRL_EN 0xB2 +#define REG_CTRL_ERROR 0xB5 +#define ULPI_I2C_CONFLICT_INTEN (1 << 0) + +#define OTHER_FUNC_CTRL2 0xB8 +#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) + +/* following registers do not have separate _clr and _set registers */ +#define VBUS_DEBOUNCE 0xC0 +#define ID_DEBOUNCE 0xC1 +#define VBAT_TIMER 0xD3 +#define PHY_PWR_CTRL 0xFD +#define PHY_PWR_PHYPWD (1 << 0) +#define PHY_CLK_CTRL 0xFE +#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) +#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) +#define REQ_PHY_DPLL_CLK (1 << 0) +#define PHY_CLK_CTRL_STS 0xFF +#define PHY_DPLL_CLK (1 << 0) + +/* In module TWL_MODULE_PM_MASTER */ +#define STS_HW_CONDITIONS 0x0F + +/* In module TWL_MODULE_PM_RECEIVER */ +#define VUSB_DEDICATED1 0x7D +#define VUSB_DEDICATED2 0x7E +#define VUSB1V5_DEV_GRP 0x71 +#define VUSB1V5_TYPE 0x72 +#define VUSB1V5_REMAP 0x73 +#define VUSB1V8_DEV_GRP 0x74 +#define VUSB1V8_TYPE 0x75 +#define VUSB1V8_REMAP 0x76 +#define VUSB3V1_DEV_GRP 0x77 +#define VUSB3V1_TYPE 0x78 +#define VUSB3V1_REMAP 0x79 + +/* In module TWL4030_MODULE_INTBR */ +#define PMBR1 0x0D +#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) + +struct twl4030_usb { + struct usb_phy phy; + struct device *dev; + + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; + + int irq; + enum omap_musb_vbus_id_status linkstat; + bool vbus_supplied; + u8 asleep; + bool irq_enabled; + + struct delayed_work id_workaround_work; +}; + +/* internal define on top of container_of */ +#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) + +/*-------------------------------------------------------------------------*/ + +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) +{ + u8 check; + + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 1, module, address, check, data); + + /* Failed once: Try again */ + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 2, module, address, check, data); + + /* Failed again: Return error */ + return -EBUSY; +} + +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) + +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) +{ + int ret = 0; + + ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); + if (ret < 0) + dev_dbg(twl->dev, + "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) +{ + u8 data; + int ret = 0; + + ret = twl_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_dbg(twl->dev, + "TWL4030:readb[0x%x,0x%x] Error %d\n", + module, address, ret); + + return ret; +} + +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) +{ + return twl4030_readb(twl, TWL_MODULE_USB, address); +} + +/*-------------------------------------------------------------------------*/ + +static inline int +twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_SET(reg), bits); +} + +static inline int +twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_CLR(reg), bits); +} + +/*-------------------------------------------------------------------------*/ + +static bool twl4030_is_driving_vbus(struct twl4030_usb *twl) +{ + int ret; + + ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS); + if (ret < 0 || !(ret & PHY_DPLL_CLK)) + /* + * if clocks are off, registers are not updated, + * but we can assume we don't drive VBUS in this case + */ + return false; + + ret = twl4030_usb_read(twl, ULPI_OTG_CTRL); + if (ret < 0) + return false; + + return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false; +} + +static enum omap_musb_vbus_id_status + twl4030_usb_linkstat(struct twl4030_usb *twl) +{ + int status; + enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; + + twl->vbus_supplied = false; + + /* + * For ID/VBUS sensing, see manual section 15.4.8 ... + * except when using only battery backup power, two + * comparators produce VBUS_PRES and ID_PRES signals, + * which don't match docs elsewhere. But ... BIT(7) + * and BIT(2) of STS_HW_CONDITIONS, respectively, do + * seem to match up. If either is true the USB_PRES + * signal is active, the OTG module is activated, and + * its interrupt may be raised (may wake the system). + */ + status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); + else if (status & (BIT(7) | BIT(2))) { + if (status & BIT(7)) { + if (twl4030_is_driving_vbus(twl)) + status &= ~BIT(7); + else + twl->vbus_supplied = true; + } + + if (status & BIT(2)) + linkstat = OMAP_MUSB_ID_GROUND; + else if (status & BIT(7)) + linkstat = OMAP_MUSB_VBUS_VALID; + else + linkstat = OMAP_MUSB_VBUS_OFF; + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) + linkstat = OMAP_MUSB_VBUS_OFF; + } + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", + status, status, linkstat); + + /* REVISIT this assumes host and peripheral controllers + * are registered, and that both are active... + */ + + return linkstat; +} + +static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) +{ + twl->usb_mode = mode; + + switch (mode) { + case T2_USB_MODE_ULPI: + twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, + ULPI_IFC_CTRL_CARKITMODE); + twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, + ULPI_FUNC_CTRL_XCVRSEL_MASK | + ULPI_FUNC_CTRL_OPMODE_MASK); + break; + case -1: + /* FIXME: power on defaults */ + break; + default: + dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", + mode); + break; + }; +} + +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) +{ + unsigned long timeout; + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); + + if (val >= 0) { + if (on) { + /* enable DPLL to access PHY registers over I2C */ + val |= REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + + timeout = jiffies + HZ; + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK) + && time_before(jiffies, timeout)) + udelay(10); + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK)) + dev_err(twl->dev, "Timeout setting T2 HSUSB " + "PHY DPLL clock\n"); + } else { + /* let ULPI control the DPLL clock */ + val &= ~REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + } + } +} + +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; + + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + int ret; + + if (on) { + ret = regulator_enable(twl->usb3v1); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + ret = regulator_enable(twl->usb1v8); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + + ret = regulator_enable(twl->usb1v5); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + + __twl4030_phy_power(twl, 1); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); + } else { + __twl4030_phy_power(twl, 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); + } +} + +static int twl4030_phy_power_off(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + if (twl->asleep) + return 0; + + twl4030_phy_power(twl, 0); + twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); + return 0; +} + +static void __twl4030_phy_power_on(struct twl4030_usb *twl) +{ + twl4030_phy_power(twl, 1); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); +} + +static int twl4030_phy_power_on(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + if (!twl->asleep) + return 0; + __twl4030_phy_power_on(twl); + twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); + + /* + * XXX When VBUS gets driven after musb goes to A mode, + * ID_PRES related interrupts no longer arrive, why? + * Register itself is updated fine though, so we must poll. + */ + if (twl->linkstat == OMAP_MUSB_ID_GROUND) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } + return 0; +} + +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) +{ + /* Enable writing to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ + + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + + /* Initialize 3.1V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + + /* Initialize 1.5V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + + /* Initialize 1.8V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); + + return 0; +} + +static ssize_t twl4030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&twl->lock, flags); + ret = sprintf(buf, "%s\n", + twl->vbus_supplied ? "on" : "off"); + spin_unlock_irqrestore(&twl->lock, flags); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); + +static irqreturn_t twl4030_usb_irq(int irq, void *_twl) +{ + struct twl4030_usb *twl = _twl; + enum omap_musb_vbus_id_status status; + bool status_changed = false; + + status = twl4030_usb_linkstat(twl); + + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { + /* FIXME add a set_power() method so that B-devices can + * configure the charger appropriately. It's not always + * correct to consume VBUS power, and how much current to + * consume is a function of the USB configuration chosen + * by the host. + * + * REVISIT usb_gadget_vbus_connect(...) as needed, ditto + * its disconnect() sibling, when changing to/from the + * USB_LINK_VBUS state. musb_hdrc won't care until it + * starts to handle softconnect right. + */ + omap_musb_mailbox(status); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static void twl4030_id_workaround_work(struct work_struct *work) +{ + struct twl4030_usb *twl = container_of(work, struct twl4030_usb, + id_workaround_work.work); + enum omap_musb_vbus_id_status status; + bool status_changed = false; + + status = twl4030_usb_linkstat(twl); + + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { + dev_dbg(twl->dev, "handle missing status change to %d\n", + status); + omap_musb_mailbox(status); + } + + /* don't schedule during sleep - irq works right then */ + if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } +} + +static int twl4030_phy_init(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + enum omap_musb_vbus_id_status status; + + /* + * Start in sleep state, we'll get called through set_suspend() + * callback when musb is runtime resumed and it's time to start. + */ + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + + status = twl4030_usb_linkstat(twl); + twl->linkstat = status; + + if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) { + omap_musb_mailbox(twl->linkstat); + twl4030_phy_power_on(phy); + } + + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + return 0; +} + +static int twl4030_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + otg->gadget = gadget; + if (!gadget) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + otg->host = host; + if (!host) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static const struct phy_ops ops = { + .init = twl4030_phy_init, + .power_on = twl4030_phy_power_on, + .power_off = twl4030_phy_power_off, + .owner = THIS_MODULE, +}; + +static int twl4030_usb_probe(struct platform_device *pdev) +{ + struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev); + struct twl4030_usb *twl; + struct phy *phy; + int status, err; + struct usb_otg *otg; + struct device_node *np = pdev->dev.of_node; + struct phy_provider *phy_provider; + struct phy_init_data *init_data = NULL; + + twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) { + twl->usb_mode = pdata->usb_mode; + init_data = pdata->init_data; + } else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); + if (!otg) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq = platform_get_irq(pdev, 0); + twl->vbus_supplied = false; + twl->asleep = 1; + twl->linkstat = OMAP_MUSB_UNKNOWN; + + twl->phy.dev = twl->dev; + twl->phy.label = "twl4030"; + twl->phy.otg = otg; + twl->phy.type = USB_PHY_TYPE_USB2; + + otg->phy = &twl->phy; + otg->set_host = twl4030_set_host; + otg->set_peripheral = twl4030_set_peripheral; + + phy_provider = devm_of_phy_provider_register(twl->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + phy = devm_phy_create(twl->dev, &ops, init_data); + if (IS_ERR(phy)) { + dev_dbg(&pdev->dev, "Failed to create PHY\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, twl); + + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + + INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); + + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + return err; + } + usb_add_phy_dev(&twl->phy); + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier); + + /* Our job is to use irqs and status from the power module + * to keep the transceiver disabled when nothing's connected. + * + * FIXME we actually shouldn't start enabling it until the + * USB controller drivers have said they're ready, by calling + * set_host() and/or set_peripheral() ... OTG_capable boards + * need both handles, otherwise just one suffices. + */ + twl->irq_enabled = true; + status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, + twl4030_usb_irq, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); + if (status < 0) { + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq, status); + return status; + } + + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); + return 0; +} + +static int twl4030_usb_remove(struct platform_device *pdev) +{ + struct twl4030_usb *twl = platform_get_drvdata(pdev); + int val; + + cancel_delayed_work(&twl->id_workaround_work); + device_remove_file(twl->dev, &dev_attr_vbus); + + /* set transceiver mode to power on defaults */ + twl4030_usb_set_mode(twl, -1); + + /* autogate 60MHz ULPI clock, + * clear dpll clock request for i2c access, + * disable 32KHz + */ + val = twl4030_usb_read(twl, PHY_CLK_CTRL); + if (val >= 0) { + val |= PHY_CLK_CTRL_CLOCKGATING_EN; + val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); + } + + /* disable complete OTG block */ + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + if (!twl->asleep) + twl4030_phy_power(twl, 0); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + +static struct platform_driver twl4030_usb_driver = { + .probe = twl4030_usb_probe, + .remove = twl4030_usb_remove, + .driver = { + .name = "twl4030_usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_usb_driver); +} +subsys_initcall(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_usb_driver); +} +module_exit(twl4030_usb_exit); + +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); +MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); +MODULE_LICENSE("GPL"); |
