4 files changed, 44 insertions, 7 deletions

diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 18802096148e..41ce410f7f97 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -284,7 +284,7 @@ int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev)
 		io_on.stop = s->io[i].res->end;
 
 		s->ops->set_io_map(s, &io_off);
-		mdelay(40);
+		msleep(40);
 		s->ops->set_io_map(s, &io_on);
 	}
 unlock:
@@ -567,7 +567,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
 			!(flags & CONF_ENABLE_PULSE_IRQ))
 			option |= COR_LEVEL_REQ;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option);
-		mdelay(40);
+		msleep(40);
 	}
 	if (p_dev->config_regs & PRESENT_STATUS)
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status);
diff --git a/drivers/pcmcia/ricoh.h b/drivers/pcmcia/ricoh.h
index 01098c841f87..8ac7b138c094 100644
--- a/drivers/pcmcia/ricoh.h
+++ b/drivers/pcmcia/ricoh.h
@@ -119,6 +119,10 @@
 #define  RL5C4XX_MISC_CONTROL           0x2F /* 8 bit */
 #define  RL5C4XX_ZV_ENABLE              0x08
 
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3			0x00A2 /* 16 bit */
+#define  RL5C47X_MISC3_CB_CLKRUN_DIS	BIT(1)
+
 #ifdef __YENTA_H
 
 #define rl_misc(socket)		((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_socket *socket)
         }
 }
 
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+	u16 misc3;
+
+	/*
+	 * RL5C475II likely has this setting, too, however no datasheet
+	 * is publicly available for this chip
+	 */
+	if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+	    socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+		return;
+
+	if (socket->dev->revision < 0x80)
+		return;
+
+	misc3 = config_readw(socket, RL5C4XX_MISC3);
+	if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+		if (!quiet)
+			dev_dbg(&socket->dev->dev,
+				"CLKRUN feature already disabled\n");
+	} else if (disable_clkrun) {
+		if (!quiet)
+			dev_info(&socket->dev->dev,
+				 "Disabling CLKRUN feature\n");
+		misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+		config_writew(socket, RL5C4XX_MISC3, misc3);
+	}
+}
+
 static void ricoh_save_state(struct yenta_socket *socket)
 {
 	rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct yenta_socket *socket)
 	config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
 	config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
 	config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+	ricoh_set_clkrun(socket, true);
 }
 
 
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_socket *socket)
 	config_writew(socket, RL5C4XX_CONFIG, config);
 
 	ricoh_set_zv(socket);
+	ricoh_set_clkrun(socket, false);
 
 	return 0;
 }
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index c5f2344c189b..3a8c84bb174d 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -351,19 +351,20 @@ static int soc_common_pcmcia_config_skt(
 
 	if (ret == 0) {
 		struct gpio_desc *descs[2];
-		int values[2], n = 0;
+		DECLARE_BITMAP(values, 2);
+		int n = 0;
 
 		if (skt->gpio_reset) {
 			descs[n] = skt->gpio_reset;
-			values[n++] = !!(state->flags & SS_RESET);
+			__assign_bit(n++, values, state->flags & SS_RESET);
 		}
 		if (skt->gpio_bus_enable) {
 			descs[n] = skt->gpio_bus_enable;
-			values[n++] = !!(state->flags & SS_OUTPUT_ENA);
+			__assign_bit(n++, values, state->flags & SS_OUTPUT_ENA);
 		}
 
 		if (n)
-			gpiod_set_array_value_cansleep(n, descs, values);
+			gpiod_set_array_value_cansleep(n, descs, NULL, values);
 
 		/*
 		 * This really needs a better solution.  The IRQ
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index ab3da2262f0f..ac6a3f46b1e6 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -26,7 +26,8 @@
 
 static bool disable_clkrun;
 module_param(disable_clkrun, bool, 0444);
-MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
+MODULE_PARM_DESC(disable_clkrun,
+		 "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
 
 static bool isa_probe = 1;
 module_param(isa_probe, bool, 0444);