diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/host/pci-mvebu.c | 27 | ||||
| -rw-r--r-- | drivers/pci/hotplug/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_pci.c | 9 | ||||
| -rw-r--r-- | drivers/pci/hotplug/rpadlpar_core.c | 1 | ||||
| -rw-r--r-- | drivers/pci/pci-acpi.c | 15 | ||||
| -rw-r--r-- | drivers/pci/pcie/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/pci/setup-bus.c | 69 |
7 files changed, 90 insertions, 41 deletions
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 13a633b1612e..7bf3926aecc0 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -86,10 +86,6 @@ struct mvebu_sw_pci_bridge { u16 secondary_status; u16 membase; u16 memlimit; - u16 prefmembase; - u16 prefmemlimit; - u32 prefbaseupper; - u32 preflimitupper; u16 iobaseupper; u16 iolimitupper; u8 cappointer; @@ -419,15 +415,7 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, break; case PCI_PREF_MEMORY_BASE: - *value = (bridge->prefmemlimit << 16 | bridge->prefmembase); - break; - - case PCI_PREF_BASE_UPPER32: - *value = bridge->prefbaseupper; - break; - - case PCI_PREF_LIMIT_UPPER32: - *value = bridge->preflimitupper; + *value = 0; break; case PCI_IO_BASE_UPPER16: @@ -501,19 +489,6 @@ static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, mvebu_pcie_handle_membase_change(port); break; - case PCI_PREF_MEMORY_BASE: - bridge->prefmembase = value & 0xffff; - bridge->prefmemlimit = value >> 16; - break; - - case PCI_PREF_BASE_UPPER32: - bridge->prefbaseupper = value; - break; - - case PCI_PREF_LIMIT_UPPER32: - bridge->preflimitupper = value; - break; - case PCI_IO_BASE_UPPER16: bridge->iobaseupper = value & 0xffff; bridge->iolimitupper = value >> 16; diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index bb7ebb22db01..d85009de713d 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -3,16 +3,13 @@ # menuconfig HOTPLUG_PCI - tristate "Support for PCI Hotplug" + bool "Support for PCI Hotplug" depends on PCI && SYSFS ---help--- Say Y here if you have a motherboard with a PCI Hotplug controller. This allows you to add and remove PCI cards while the machine is powered up and running. - To compile this driver as a module, choose M here: the - module will be called pci_hotplug. - When in doubt, say N. if HOTPLUG_PCI diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index aac7a40e4a4a..0e0d0f7f63fd 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -92,7 +92,14 @@ int pciehp_unconfigure_device(struct slot *p_slot) if (ret) presence = 0; - list_for_each_entry_safe(dev, temp, &parent->devices, bus_list) { + /* + * Stopping an SR-IOV PF device removes all the associated VFs, + * which will update the bus->devices list and confuse the + * iterator. Therefore, iterate in reverse so we remove the VFs + * first, then the PF. We do the same in pci_stop_bus_device(). + */ + list_for_each_entry_safe_reverse(dev, temp, &parent->devices, + bus_list) { pci_dev_get(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) { pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl); diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index b29e20b7862f..bb7af78e4eed 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -388,7 +388,6 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) /* Remove the EADS bridge device itself */ BUG_ON(!bus->self); pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self)); - eeh_remove_bus_device(bus->self, true); pci_stop_and_remove_bus_device(bus->self); return 0; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dbdc5f7e2b29..01e264fb50e0 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -317,13 +317,20 @@ void acpi_pci_remove_bus(struct pci_bus *bus) /* ACPI bus type */ static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) { - struct pci_dev * pci_dev; - u64 addr; + struct pci_dev *pci_dev = to_pci_dev(dev); + bool is_bridge; + u64 addr; - pci_dev = to_pci_dev(dev); + /* + * pci_is_bridge() is not suitable here, because pci_dev->subordinate + * is set only after acpi_pci_find_device() has been called for the + * given device. + */ + is_bridge = pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE + || pci_dev->hdr_type == PCI_HEADER_TYPE_CARDBUS; /* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); - *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); + *handle = acpi_find_child(ACPI_HANDLE(dev->parent), addr, is_bridge); if (!*handle) return -ENODEV; return 0; diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 569f82fc9e22..3b94cfcfa03b 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -14,15 +14,12 @@ config PCIEPORTBUS # Include service Kconfig here # config HOTPLUG_PCI_PCIE - tristate "PCI Express Hotplug driver" + bool "PCI Express Hotplug driver" depends on HOTPLUG_PCI && PCIEPORTBUS help Say Y here if you have a motherboard that supports PCI Express Native Hotplug - To compile this driver as a module, choose M here: the - module will be called pciehp. - When in doubt, say N. source "drivers/pci/pcie/aer/Kconfig" diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index d254e2379533..64a7de22d9af 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -300,6 +300,47 @@ static void assign_requested_resources_sorted(struct list_head *head, } } +static unsigned long pci_fail_res_type_mask(struct list_head *fail_head) +{ + struct pci_dev_resource *fail_res; + unsigned long mask = 0; + + /* check failed type */ + list_for_each_entry(fail_res, fail_head, list) + mask |= fail_res->flags; + + /* + * one pref failed resource will set IORESOURCE_MEM, + * as we can allocate pref in non-pref range. + * Will release all assigned non-pref sibling resources + * according to that bit. + */ + return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH); +} + +static bool pci_need_to_release(unsigned long mask, struct resource *res) +{ + if (res->flags & IORESOURCE_IO) + return !!(mask & IORESOURCE_IO); + + /* check pref at first */ + if (res->flags & IORESOURCE_PREFETCH) { + if (mask & IORESOURCE_PREFETCH) + return true; + /* count pref if its parent is non-pref */ + else if ((mask & IORESOURCE_MEM) && + !(res->parent->flags & IORESOURCE_PREFETCH)) + return true; + else + return false; + } + + if (res->flags & IORESOURCE_MEM) + return !!(mask & IORESOURCE_MEM); + + return false; /* should not get here */ +} + static void __assign_resources_sorted(struct list_head *head, struct list_head *realloc_head, struct list_head *fail_head) @@ -312,11 +353,24 @@ static void __assign_resources_sorted(struct list_head *head, * if could do that, could get out early. * if could not do that, we still try to assign requested at first, * then try to reassign add_size for some resources. + * + * Separate three resource type checking if we need to release + * assigned resource after requested + add_size try. + * 1. if there is io port assign fail, will release assigned + * io port. + * 2. if there is pref mmio assign fail, release assigned + * pref mmio. + * if assigned pref mmio's parent is non-pref mmio and there + * is non-pref mmio assign fail, will release that assigned + * pref mmio. + * 3. if there is non-pref mmio assign fail or pref mmio + * assigned fail, will release assigned non-pref mmio. */ LIST_HEAD(save_head); LIST_HEAD(local_fail_head); struct pci_dev_resource *save_res; - struct pci_dev_resource *dev_res; + struct pci_dev_resource *dev_res, *tmp_res; + unsigned long fail_type; /* Check if optional add_size is there */ if (!realloc_head || list_empty(realloc_head)) @@ -348,6 +402,19 @@ static void __assign_resources_sorted(struct list_head *head, return; } + /* check failed type */ + fail_type = pci_fail_res_type_mask(&local_fail_head); + /* remove not need to be released assigned res from head list etc */ + list_for_each_entry_safe(dev_res, tmp_res, head, list) + if (dev_res->res->parent && + !pci_need_to_release(fail_type, dev_res->res)) { + /* remove it from realloc_head list */ + remove_from_list(realloc_head, dev_res->res); + remove_from_list(&save_head, dev_res->res); + list_del(&dev_res->list); + kfree(dev_res); + } + free_list(&local_fail_head); /* Release assigned resource */ list_for_each_entry(dev_res, head, list) |
