summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/probe.c')
-rw-r--r--drivers/pci/probe.c93
1 files changed, 42 insertions, 51 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6e34498ec9f0..ef09f5f2fe6c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -252,6 +252,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
/* Address above 32-bit boundary; disable the BAR */
pci_write_config_dword(dev, pos, 0);
pci_write_config_dword(dev, pos + 4, 0);
+ res->flags |= IORESOURCE_UNSET;
region.start = 0;
region.end = sz64;
bar_disabled = true;
@@ -731,22 +732,6 @@ struct pci_bus *__ref pci_add_new_bus(struct pci_bus *parent, struct pci_dev *de
return child;
}
-static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
-{
- struct pci_bus *parent = child->parent;
-
- /* Attempts to fix that up are really dangerous unless
- we're going to re-assign all bus numbers. */
- if (!pcibios_assign_all_busses())
- return;
-
- while (parent->parent && parent->busn_res.end < max) {
- parent->busn_res.end = max;
- pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
- parent = parent->parent;
- }
-}
-
/*
* If it's a bridge, configure it and scan the bus behind it.
* For CardBus bridges, we don't scan behind as the devices will
@@ -782,7 +767,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number ||
- secondary > subordinate)) {
+ secondary > subordinate || subordinate > bus->busn_res.end)) {
dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
secondary, subordinate);
broken = 1;
@@ -805,11 +790,10 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
goto out;
/*
- * If we already got to this bus through a different bridge,
- * don't re-add it. This can happen with the i450NX chipset.
- *
- * However, we continue to descend down the hierarchy and
- * scan remaining child buses.
+ * The bus might already exist for two reasons: Either we are
+ * rescanning the bus or the bus is reachable through more than
+ * one bridge. The second case can happen with the i450NX
+ * chipset.
*/
child = pci_find_bus(pci_domain_nr(bus), secondary);
if (!child) {
@@ -822,17 +806,19 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
}
cmax = pci_scan_child_bus(child);
- if (cmax > max)
- max = cmax;
- if (child->busn_res.end > max)
- max = child->busn_res.end;
+ if (cmax > subordinate)
+ dev_warn(&dev->dev, "bridge has subordinate %02x but max busn %02x\n",
+ subordinate, cmax);
+ /* subordinate should equal child->busn_res.end */
+ if (subordinate > max)
+ max = subordinate;
} else {
/*
* We need to assign a number to this bus which we always
* do in the second pass.
*/
if (!pass) {
- if (pcibios_assign_all_busses() || broken)
+ if (pcibios_assign_all_busses() || broken || is_cardbus)
/* Temporarily disable forwarding of the
configuration cycles on all bridges in
this bus segment to avoid possible
@@ -844,19 +830,25 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
goto out;
}
+ if (max >= bus->busn_res.end) {
+ dev_warn(&dev->dev, "can't allocate child bus %02x from %pR\n",
+ max, &bus->busn_res);
+ goto out;
+ }
+
/* Clear errors */
pci_write_config_word(dev, PCI_STATUS, 0xffff);
- /* Prevent assigning a bus number that already exists.
- * This can happen when a bridge is hot-plugged, so in
- * this case we only re-scan this bus. */
+ /* The bus will already exist if we are rescanning */
child = pci_find_bus(pci_domain_nr(bus), max+1);
if (!child) {
- child = pci_add_new_bus(bus, dev, ++max);
+ child = pci_add_new_bus(bus, dev, max+1);
if (!child)
goto out;
- pci_bus_insert_busn_res(child, max, 0xff);
+ pci_bus_insert_busn_res(child, max+1,
+ bus->busn_res.end);
}
+ max++;
buses = (buses & 0xff000000)
| ((unsigned int)(child->primary) << 0)
| ((unsigned int)(child->busn_res.start) << 8)
@@ -878,20 +870,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
if (!is_cardbus) {
child->bridge_ctl = bctl;
- /*
- * Adjust subordinate busnr in parent buses.
- * We do this before scanning for children because
- * some devices may not be detected if the bios
- * was lazy.
- */
- pci_fixup_parent_subordinate_busnr(child, max);
- /* Now we can scan all subordinate buses... */
max = pci_scan_child_bus(child);
- /*
- * now fix it up again since we have found
- * the real value of max.
- */
- pci_fixup_parent_subordinate_busnr(child, max);
} else {
/*
* For CardBus bridges, we leave 4 bus numbers
@@ -922,11 +901,15 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
}
}
max += i;
- pci_fixup_parent_subordinate_busnr(child, max);
}
/*
* Set the subordinate bus number to its real value.
*/
+ if (max > bus->busn_res.end) {
+ dev_warn(&dev->dev, "max busn %02x is outside %pR\n",
+ max, &bus->busn_res);
+ max = bus->busn_res.end;
+ }
pci_bus_update_busn_res_end(child, max);
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
}
@@ -1125,10 +1108,10 @@ int pci_setup_device(struct pci_dev *dev)
pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
/*
- * Do the ugly legacy mode stuff here rather than broken chip
- * quirk code. Legacy mode ATA controllers have fixed
- * addresses. These are not always echoed in BAR0-3, and
- * BAR0-3 in a few cases contain junk!
+ * Do the ugly legacy mode stuff here rather than broken chip
+ * quirk code. Legacy mode ATA controllers have fixed
+ * addresses. These are not always echoed in BAR0-3, and
+ * BAR0-3 in a few cases contain junk!
*/
if (class == PCI_CLASS_STORAGE_IDE) {
u8 progif;
@@ -1139,11 +1122,15 @@ int pci_setup_device(struct pci_dev *dev)
res = &dev->resource[0];
res->flags = LEGACY_IO_RESOURCE;
pcibios_bus_to_resource(dev->bus, res, &region);
+ dev_info(&dev->dev, "legacy IDE quirk: reg 0x10: %pR\n",
+ res);
region.start = 0x3F6;
region.end = 0x3F6;
res = &dev->resource[1];
res->flags = LEGACY_IO_RESOURCE;
pcibios_bus_to_resource(dev->bus, res, &region);
+ dev_info(&dev->dev, "legacy IDE quirk: reg 0x14: %pR\n",
+ res);
}
if ((progif & 4) == 0) {
region.start = 0x170;
@@ -1151,11 +1138,15 @@ int pci_setup_device(struct pci_dev *dev)
res = &dev->resource[2];
res->flags = LEGACY_IO_RESOURCE;
pcibios_bus_to_resource(dev->bus, res, &region);
+ dev_info(&dev->dev, "legacy IDE quirk: reg 0x18: %pR\n",
+ res);
region.start = 0x376;
region.end = 0x376;
res = &dev->resource[3];
res->flags = LEGACY_IO_RESOURCE;
pcibios_bus_to_resource(dev->bus, res, &region);
+ dev_info(&dev->dev, "legacy IDE quirk: reg 0x1c: %pR\n",
+ res);
}
}
break;
@@ -1835,7 +1826,7 @@ int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
res->flags |= IORESOURCE_PCI_FIXED;
}
- conflict = insert_resource_conflict(parent_res, res);
+ conflict = request_resource_conflict(parent_res, res);
if (conflict)
dev_printk(KERN_DEBUG, &b->dev,
OpenPOWER on IntegriCloud