diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 153 |
1 files changed, 148 insertions, 5 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6d4a5319148d..97fff785e97e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -88,6 +88,12 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2; u8 pci_cache_line_size; +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children * @bus: pointer to PCI bus structure to search @@ -959,6 +965,7 @@ void pci_restore_state(struct pci_dev *dev) /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); + pci_restore_ats_state(dev); /* * The Base Address register should be programmed before the command @@ -967,7 +974,7 @@ void pci_restore_state(struct pci_dev *dev) for (i = 15; i >= 0; i--) { pci_read_config_dword(dev, i * 4, &val); if (val != dev->saved_config_space[i]) { - dev_printk(KERN_DEBUG, &dev->dev, "restoring config " + dev_dbg(&dev->dev, "restoring config " "space at offset %#x (was %#x, writing %#x)\n", i, val, (int)dev->saved_config_space[i]); pci_write_config_dword(dev,i * 4, @@ -1536,8 +1543,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } out: - dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n", - enable ? "enabled" : "disabled"); + dev_dbg(&dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); } /** @@ -2596,6 +2602,33 @@ static void __pci_set_master(struct pci_dev *dev, bool enable) } /** + * pcibios_set_master - enable PCI bus-mastering for device dev + * @dev: the PCI device to enable + * + * Enables PCI bus-mastering for the device. This is the default + * implementation. Architecture specific implementations can override + * this if necessary. + */ +void __weak pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + + /* The latency timer doesn't apply to PCIe (either Type 0 or Type 1) */ + if (pci_is_pcie(dev)) + return; + + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +/** * pci_set_master - enables bus-mastering for device dev * @dev: the PCI device to enable * @@ -2768,6 +2801,116 @@ pci_intx(struct pci_dev *pdev, int enable) } /** + * pci_intx_mask_supported - probe for INTx masking support + * @pdev: the PCI device to operate on + * + * Check if the device dev support INTx masking via the config space + * command word. + */ +bool pci_intx_mask_supported(struct pci_dev *dev) +{ + bool mask_supported = false; + u16 orig, new; + + pci_cfg_access_lock(dev); + + pci_read_config_word(dev, PCI_COMMAND, &orig); + pci_write_config_word(dev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(dev, PCI_COMMAND, &new); + + /* + * There's no way to protect against hardware bugs or detect them + * reliably, but as long as we know what the value should be, let's + * go ahead and check it. + */ + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + dev_err(&dev->dev, "Command register changed from " + "0x%x to 0x%x: driver or hardware bug?\n", orig, new); + } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) { + mask_supported = true; + pci_write_config_word(dev, PCI_COMMAND, orig); + } + + pci_cfg_access_unlock(dev); + return mask_supported; +} +EXPORT_SYMBOL_GPL(pci_intx_mask_supported); + +static bool pci_check_and_set_intx_mask(struct pci_dev *dev, bool mask) +{ + struct pci_bus *bus = dev->bus; + bool mask_updated = true; + u32 cmd_status_dword; + u16 origcmd, newcmd; + unsigned long flags; + bool irq_pending; + + /* + * We do a single dword read to retrieve both command and status. + * Document assumptions that make this possible. + */ + BUILD_BUG_ON(PCI_COMMAND % 4); + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS); + + raw_spin_lock_irqsave(&pci_lock, flags); + + bus->ops->read(bus, dev->devfn, PCI_COMMAND, 4, &cmd_status_dword); + + irq_pending = (cmd_status_dword >> 16) & PCI_STATUS_INTERRUPT; + + /* + * Check interrupt status register to see whether our device + * triggered the interrupt (when masking) or the next IRQ is + * already pending (when unmasking). + */ + if (mask != irq_pending) { + mask_updated = false; + goto done; + } + + origcmd = cmd_status_dword; + newcmd = origcmd & ~PCI_COMMAND_INTX_DISABLE; + if (mask) + newcmd |= PCI_COMMAND_INTX_DISABLE; + if (newcmd != origcmd) + bus->ops->write(bus, dev->devfn, PCI_COMMAND, 2, newcmd); + +done: + raw_spin_unlock_irqrestore(&pci_lock, flags); + + return mask_updated; +} + +/** + * pci_check_and_mask_intx - mask INTx on pending interrupt + * @pdev: the PCI device to operate on + * + * Check if the device dev has its INTx line asserted, mask it and + * return true in that case. False is returned if not interrupt was + * pending. + */ +bool pci_check_and_mask_intx(struct pci_dev *dev) +{ + return pci_check_and_set_intx_mask(dev, true); +} +EXPORT_SYMBOL_GPL(pci_check_and_mask_intx); + +/** + * pci_check_and_mask_intx - unmask INTx of no interrupt is pending + * @pdev: the PCI device to operate on + * + * Check if the device dev has its INTx line asserted, unmask it if not + * and return true. False is returned and the mask remains active if + * there was still an interrupt pending. + */ +bool pci_check_and_unmask_intx(struct pci_dev *dev) +{ + return pci_check_and_set_intx_mask(dev, false); +} +EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx); + +/** * pci_msi_off - disables any msi or msix capabilities * @dev: the PCI device to operate on * @@ -2965,7 +3108,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) might_sleep(); if (!probe) { - pci_block_user_cfg_access(dev); + pci_cfg_access_lock(dev); /* block PM suspend, driver probe, etc. */ device_lock(&dev->dev); } @@ -2990,7 +3133,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) done: if (!probe) { device_unlock(&dev->dev); - pci_unblock_user_cfg_access(dev); + pci_cfg_access_unlock(dev); } return rc; |
