summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug')
-rw-r--r--drivers/pci/hotplug/pciehp.h1
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c31
2 files changed, 12 insertions, 20 deletions
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 1f887f64e493..2bf8d28062e8 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -112,6 +112,7 @@ struct controller {
unsigned int no_cmd_complete:1;
unsigned int link_active_reporting:1;
unsigned int notification_enabled:1;
+ unsigned int power_fault_detected;
};
#define INT_BUTTON_IGNORE 0
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index c1a312f24060..07bd32151146 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -548,23 +548,21 @@ static int hpc_power_on_slot(struct slot * slot)
slot_cmd = POWER_ON;
cmd_mask = PCI_EXP_SLTCTL_PCC;
- /* Enable detection that we turned off at slot power-off time */
if (!pciehp_poll_mode) {
- slot_cmd |= (PCI_EXP_SLTCTL_PFDE | PCI_EXP_SLTCTL_MRLSCE |
- PCI_EXP_SLTCTL_PDCE);
- cmd_mask |= (PCI_EXP_SLTCTL_PFDE | PCI_EXP_SLTCTL_MRLSCE |
- PCI_EXP_SLTCTL_PDCE);
+ /* Enable power fault detection turned off at power off time */
+ slot_cmd |= PCI_EXP_SLTCTL_PFDE;
+ cmd_mask |= PCI_EXP_SLTCTL_PFDE;
}
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
-
if (retval) {
ctrl_err(ctrl, "Write %x command failed!\n", slot_cmd);
- return -1;
+ return retval;
}
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
+ ctrl->power_fault_detected = 0;
return retval;
}
@@ -621,18 +619,10 @@ static int hpc_power_off_slot(struct slot * slot)
slot_cmd = POWER_OFF;
cmd_mask = PCI_EXP_SLTCTL_PCC;
- /*
- * If we get MRL or presence detect interrupts now, the isr
- * will notice the sticky power-fault bit too and issue power
- * indicator change commands. This will lead to an endless loop
- * of command completions, since the power-fault bit remains on
- * till the slot is powered on again.
- */
if (!pciehp_poll_mode) {
- slot_cmd &= ~(PCI_EXP_SLTCTL_PFDE | PCI_EXP_SLTCTL_MRLSCE |
- PCI_EXP_SLTCTL_PDCE);
- cmd_mask |= (PCI_EXP_SLTCTL_PFDE | PCI_EXP_SLTCTL_MRLSCE |
- PCI_EXP_SLTCTL_PDCE);
+ /* Disable power fault detection */
+ slot_cmd &= ~PCI_EXP_SLTCTL_PFDE;
+ cmd_mask |= PCI_EXP_SLTCTL_PFDE;
}
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
@@ -710,9 +700,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
pciehp_handle_presence_change(p_slot);
/* Check Power Fault Detected */
- if (intr_loc & PCI_EXP_SLTSTA_PFD)
+ if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
+ ctrl->power_fault_detected = 1;
pciehp_handle_power_fault(p_slot);
-
+ }
return IRQ_HANDLED;
}
OpenPOWER on IntegriCloud