summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/shpchp_hpc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/shpchp_hpc.c')
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c82
1 files changed, 54 insertions, 28 deletions
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 4d8aee119134..83a5226ba9ed 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -302,21 +302,51 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec)
add_timer(&php_ctlr->int_poll_timer);
}
+static inline int is_ctrl_busy(struct controller *ctrl)
+{
+ u16 cmd_status = shpc_readw(ctrl, CMD_STATUS);
+ return cmd_status & 0x1;
+}
+
+/*
+ * Returns 1 if SHPC finishes executing a command within 1 sec,
+ * otherwise returns 0.
+ */
+static inline int shpc_poll_ctrl_busy(struct controller *ctrl)
+{
+ int i;
+
+ if (!is_ctrl_busy(ctrl))
+ return 1;
+
+ /* Check every 0.1 sec for a total of 1 sec */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ if (!is_ctrl_busy(ctrl))
+ return 1;
+ }
+
+ return 0;
+}
+
static inline int shpc_wait_cmd(struct controller *ctrl)
{
int retval = 0;
- unsigned int timeout_msec = shpchp_poll_mode ? 2000 : 1000;
- unsigned long timeout = msecs_to_jiffies(timeout_msec);
- int rc = wait_event_interruptible_timeout(ctrl->queue,
- !ctrl->cmd_busy, timeout);
- if (!rc) {
+ unsigned long timeout = msecs_to_jiffies(1000);
+ int rc;
+
+ if (shpchp_poll_mode)
+ rc = shpc_poll_ctrl_busy(ctrl);
+ else
+ rc = wait_event_interruptible_timeout(ctrl->queue,
+ !is_ctrl_busy(ctrl), timeout);
+ if (!rc && is_ctrl_busy(ctrl)) {
retval = -EIO;
- err("Command not completed in %d msec\n", timeout_msec);
+ err("Command not completed in 1000 msec\n");
} else if (rc < 0) {
retval = -EINTR;
info("Command was interrupted by a signal\n");
}
- ctrl->cmd_busy = 0;
return retval;
}
@@ -327,26 +357,15 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
u16 cmd_status;
int retval = 0;
u16 temp_word;
- int i;
DBG_ENTER_ROUTINE
mutex_lock(&slot->ctrl->cmd_lock);
- for (i = 0; i < 10; i++) {
- cmd_status = shpc_readw(ctrl, CMD_STATUS);
-
- if (!(cmd_status & 0x1))
- break;
- /* Check every 0.1 sec for a total of 1 sec*/
- msleep(100);
- }
-
- cmd_status = shpc_readw(ctrl, CMD_STATUS);
-
- if (cmd_status & 0x1) {
+ if (!shpc_poll_ctrl_busy(ctrl)) {
/* After 1 sec and and the controller is still busy */
- err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__);
+ err("%s : Controller is still busy after 1 sec.\n",
+ __FUNCTION__);
retval = -EBUSY;
goto out;
}
@@ -358,7 +377,6 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
/* To make sure the Controller Busy bit is 0 before we send out the
* command.
*/
- slot->ctrl->cmd_busy = 1;
shpc_writew(ctrl, CMD, temp_word);
/*
@@ -908,7 +926,6 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
- ctrl->cmd_busy = 0;
wake_up_interruptible(&ctrl->queue);
}
@@ -1101,7 +1118,7 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
{
struct php_ctlr_state_s *php_ctlr, *p;
void *instance_id = ctrl;
- int rc, num_slots = 0;
+ int rc = -1, num_slots = 0;
u8 hp_slot;
u32 shpc_base_offset;
u32 tempdword, slot_reg, slot_config;
@@ -1167,11 +1184,15 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
pdev->subsystem_device);
- if (pci_enable_device(pdev))
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ err("%s: pci_enable_device failed\n", __FUNCTION__);
goto abort_free_ctlr;
+ }
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
err("%s: cannot reserve MMIO region\n", __FUNCTION__);
+ rc = -1;
goto abort_free_ctlr;
}
@@ -1180,6 +1201,7 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__,
ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
+ rc = -1;
goto abort_free_ctlr;
}
dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
@@ -1282,8 +1304,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
*/
if (atomic_add_return(1, &shpchp_num_controllers) == 1) {
shpchp_wq = create_singlethread_workqueue("shpchpd");
- if (!shpchp_wq)
- return -ENOMEM;
+ if (!shpchp_wq) {
+ rc = -ENOMEM;
+ goto abort_free_ctlr;
+ }
}
/*
@@ -1313,8 +1337,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
/* We end up here for the many possible ways to fail this API. */
abort_free_ctlr:
+ if (php_ctlr->creg)
+ iounmap(php_ctlr->creg);
kfree(php_ctlr);
abort:
DBG_LEAVE_ROUTINE
- return -1;
+ return rc;
}
OpenPOWER on IntegriCloud